2A2XQ-YL58AElectronic Lock

     
     



   



   



   



   



   



   



   



      
   

 

 


   



   



   



   



       </$b Electronic Lock FCC Warnning: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection againstharmful interference in a residential installation. This equipment generates, uses and can radiateradio frequency energy and, if not installed and used in accordance with the instructions, maycause harmful interference to radio communications. However, there is no guarantee thatinterference will not occur in a particular installation. If this equipment does cause harmfulinterference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of thefollowing measures: ЬReorient or relocate the receiving antenna. ЬIncrease the separation between the equipment and receiver. ЬConnect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator and your body. ISED Statement ϋEnglish: This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, a nd (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3(B)/NMB-3(B). ϋFrench: Le présentappareilestconforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareildoit accepter tout brouillageradi oélectriquesubi, mêmesi le brouillageest susceptible d'encompromettre le fonctionnement. l'appareil numlrique du ciem conforme canadien peutϋ3 (b) / nmbϋ3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 0cm between the radiator & your body. Cet équipement est conforme Canada limites d'exposition aux radiations dans un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 0 cm entre le radiateur et votre corps.

Wenzhou Jinbao Electronic Lock Co., Ltd. The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/21/2023 To whom it may concern: We, Wenzhou Jinbao Electronic Lock Co., Ltd. hereby certify that the equipment for which authorization is sought (FCC ID: 2A2XQ-YL58A) is not “covered” equipment prohibited from receiving an equipment authorization pursuant to § 2.903 of the FCC rules. We also certify that, as of the date of the filing of the application, we are not identified on the Covered List (https://www.fcc.gov/supplychain/coveredlist) as an entity producing “covered” equipment. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(b) and (d)(5) and (6). Sincerely, Signature Wu Yong N/A Wenzhou Jinbao Electronic Lock Co., Ltd. 62_[model] CoveredEqu_2.911(d)(5)(i) and (ii) - U, V02

FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Appendix III EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Photo 3 Appearance of EUT

FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Appendix IID Label Size for the label: 20mm X 20mm Appendix II ID Label Location Electronic Lock FCC ID: 2A2XQ-YL58A Model: YL-58A

FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Appendix IV EUT Internal Photographs Photo 4 Internal of EUT Photo 5 Internal of EUT FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Photo 6 Internal of EUT Photo 7 Internal of EUT FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Photo 8 Appearance of PCB Photo 9 Appearance of PCB FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Photo 10 Appearance of PCB Antenna

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202306-0156-28 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID: 2A2XQ-YL58A 1. Client Information Applicant : Wenzhou Jinbao Electronic Lock Co., Ltd. Address : Room 302, 2 Bldg., Wenchang Road 159, Puzhou Street, Longwan District, Wenzhou, Zhejiang Province, China Manufacturer : Wenzhou Jinbao Electronic Lock Co., Ltd. Address : Room 302, 2 Bldg., Wenchang Road 159, Puzhou Street, Longwan District, Wenzhou, Zhejiang Province, China 2. General Description of EUT EUT Name : Electronic Lock Model No. : YL-58A, YL-58JA, YL-58BA, YL-56A, YL-56JA, YL-56BA, YL-57A, YL-57JA, YL-57BA, YL-58MA, YL-58JMA, YL-58BMA, YL-57MA, YL-57JMA, YL-57BMA Model Difference : All models are identical in the same PCB layout, interior structure and electrical circuits, The only difference is model name. Sample ID : 202306-0156-16-1# & 202306-0156-16-2# Product Description : Operation Frequency: Bluetooth 5.0(BLE): 2402MHz~2480MHz Number of Channel: Bluetooth 5.0(BLE): 40 channels Antenna Gain: 1.2dBi PCB Antenna Power Supply : Input: DC 6V, 1A DC 1.5V by AAA battery*4 Software Version : V1.0.1 Hardware Version : V1.0 Remark: The antenna gain provided by the applicant, and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202306-0156-28 Page: 2 of 3 TB-RF-074-1.0 The RF Exposure Evaluation for FCC: SAR Test Exclusion Calculations FCC: According to 447498 D04 Interim General RF Exposure Guidance v01. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold P th (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by Formula (B.2). and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). The example values shown in Table B.2 are for illustration only. Table B.2—Example Power Thresholds (mW) Report No.: TBR-C-202306-0156-28 Page: 3 of 3 TB-RF-074-1.0 Calculation: Test separation: 5mm BLE (1Mbps) Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mW) Limit P th (mW) 2.402 -0.044 0±1 1 1.259 3 2.440 0.626 0±1 1 1.259 3 2.480 0.899 0±1 1 1.259 3 The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 D04, No SAR is required. -----END OF THE REPORT-----

Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 1 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 RF Test Data for Bluetooth LE (Conducted Measurements) General Description of EUT Product Name: Electronic Lock Test Model: YL-58A Sample ID: 202306-0156-16-2# Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 6V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202306-0156-22 The report only show the worst case data. Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 2 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 6 3. -6dB Bandwidth .................................................................................................................................................................................. 9 4. Occupied Channel Bandwidth ......................................................................................................................................................... 12 5. Maximum Power Spectral Density Level ......................................................................................................................................... 15 6. Band Edge ........................................................................................................................................................................................ 18 7. Conducted RF Spurious Emission .................................................................................................................................................. 21 8. Restrict Band .................................................................................................................................................................................... 25 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 3 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT BLE 1Mbps 2402 Ant1 35.42 4.51 0.98 NVNT BLE 1Mbps 2440 Ant1 35.42 4.51 0.98 NVNT BLE 1Mbps 2480 Ant1 35.42 4.51 0.98 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 4 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Test Graphs Duty Cycle NVNT BLE 1Mbps 2402MHz Ant1 Duty Cycle NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 5 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Duty Cycle NVNT BLE 1Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 6 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT BLE 1Mbps 2402 Ant1 -0.044 30 Pass NVNT BLE 1Mbps 2440 Ant1 0.626 30 Pass NVNT BLE 1Mbps 2480 Ant1 0.899 30 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 7 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Test Graphs Power NVNT BLE 1Mbps 2402MHz Ant1 Power NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 8 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Power NVNT BLE 1Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 9 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 3. -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT BLE 1Mbps 2402 Ant1 0.69 0.5 Pass NVNT BLE 1Mbps 2440 Ant1 0.72 0.5 Pass NVNT BLE 1Mbps 2480 Ant1 0.69 0.5 Pass Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 10 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Test Graphs -6dB Bandwidth NVNT BLE 1Mbps 2402MHz Ant1 -6dB Bandwidth NVNT BLE 1Mbps 2440MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-202306-0156-22 Page: 11 of 27 FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 -6dB Bandwidth NVNT BLE 1Mbps 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Http://www.tobylab.cn Add：1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China. Report No.: TBR-C-2…

Text truncated - open the document above for the full version.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202306-0156-22 Page: 1 of 32 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID: 2A2XQ-YL58A Report No. : TBR-C-202306-0156-22 Applicant : Wenzhou Jinbao Electronic Lock Co., Ltd. Equipment Under Test (EUT) EUT Name : Electronic Lock Model No. : YL-58A Series Model No. : YL-58JA, YL-58BA, YL-56A, YL-56JA, YL-56BA, YL-57A, YL-57JA, YL-57BA, YL-58MA, YL-58JMA, YL-58BMA, YL-57MA, YL-57JMA, YL-57BMA Brand Name : ---- Sample ID : 202306-0156-16-1# & 202306-0156-16-2# Receipt Date : 2023-07-03 Test Date : 2023-07-03 to 2023-07-17 Issue Date : 2023-07-18 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Wade. Lv Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202306-0156-22 Page: 2 of 32 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 5 1.1 Client Information ................................................................................................................. 5 1.2 General Description of EUT (Equipment Under Test) ................................................... 5 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 6 1.4 Description of Support Units .............................................................................................. 7 1.5 Description of Test Mode .................................................................................................... 7 1.6 Description of Test Software Setting ................................................................................ 8 1.7 Measurement Uncertainty .................................................................................................. 8 1.8 Test Facility ........................................................................................................................... 9 2. TEST SUMMARY ..................................................................................................................... 10 3. TEST SOFTWARE ................................................................................................................... 10 4. TEST EQUIPMENT .................................................................................................................. 11 5. CONDUCTED EMISSION ....................................................................................................... 13 5.1 Test Standard and Limit .................................................................................................... 13 5.2 Test Setup ........................................................................................................................... 13 5.3 Test Procedure ................................................................................................................... 13 5.4 Deviation From Test Standard ......................................................................................... 14 5.5 EUT Operating Mode ........................................................................................................ 14 5.6 Test Data ............................................................................................................................. 14 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 15 6.1 Test Standard and Limit .................................................................................................... 15 6.2 Test Setup ........................................................................................................................... 17 6.3 Test Procedure ................................................................................................................... 18 6.4 Deviation From Test Standard ......................................................................................... 19 6.5 EUT Operating Mode ........................................................................................................ 19 6.6 Test Data ............................................................................................................................. 19 7. RESTRICTED BANDS REQUIREMENT ............................................................................. 20 7.1 Test Standard and Limit .................................................................................................... 20 7.2 Test Setup ........................................................................................................................... 20 7.3 Test Procedure ................................................................................................................... 21 7.4 Deviation From Test Standard ......................................................................................... 22 Report No.: TBR-C-202306-0156-22 Page: 3 of 32 TB-RF-074-1.0 7.5 EUT Operating Mode ........................................................................................................ 22 7.6 Test Data ............................................................................................................................. 22 8. BANDWIDTH TEST .............................................…

Text truncated - open the document above for the full version.

version01 Wenzhou Jinbao Electronic Lock Co., Ltd. Declaration concerning Antenna Specification It is hereby declared that the product Model No.: YL-58A, YL-58JA, YL-58BA, YL-56A, YL-56JA, YL-56BA, YL-57A, YL-57JA, YL-57BA, YL-58MA, YL-58JMA, YL-58BMA, YL-57MA, YL-57JMA, YL-57BMA FCC ID: 2A2XQ-YL58A fulfills the requirement in FCC test relating to the antenna type. The device specified above confirms to the FCC recommendations for PCB antenna type(s) described below: Antenna No. Model No. of antenna: Type of antenna: Gain of the antenna (Max.) Frequency range: Bluetooth / PCB Antenna 1.2dBi for 2400-2500MHz; The mounting of the antenna is fixed to the radio module and no other antenna should be used. Company name: Wenzhou Jinbao Electronic Lock Co., Ltd. Address: Room 302, 2 Bldg., Wenchang Road 159, Puzhou Street, Longwan District, Wenzhou, Zhejiang Province, China Place: Wu Yong Date: 2023-7-18 Signature:

V . S .W . R < 1.4 Polarization Type V ertical & Horizontal Frequenc Range 2 400 ~ 2500MHz Input Impendence(ohm) 50 Efficiency (dB)6 0.2 % 60.2 %-3.6 1.081.2 Maximum Power (dBm)1.3 (XY-plane) Gain (dBi)1.2 (Peak Gain XY-plane) Peak EIRP(dBm)1.2 Tot. Rad. Pwr. (dBm)-1.2 (Input pwr – loss pwr) Product specification Quick Reference Date Antenna module on the system board Ant. Port Input Pwr. (dBm )0 (Typ. BT class 2 output power) Directivity (dBi)1 (all direction antenna) Minimum Power (dBm)-4(XY-plane) Avg. Power (dBm)- 0.5(XY-plane) All the technical data and information contained herein are subject to change without prior notice Antenna Layout & module on the system board Antenna Gain Gain Table Unit in dBi @2.44GHz XY-planeXZ-plane YZ-plane Effi ciency Peak Avg. Peak Avg. Peak Avg. Module Board -0.51.12-3.0 Ret u rn Loss The Environment of Antenna Radiation Pattern 3D radiation pattern diagram XY -planeXZ-planeYZ-plane

FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Appendix V EUT Test Photographs Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2A2XQ-YL58A TB-RF-074-1.0 Photo of Setup for Radiated Emission (Above 1 GHz) -----END OF THE REPORT-----