2A2YP-CQ60PROBECQ60-PR-01,CQ60-PR-02,CQ60-PR-03, CQ60-PR-04,CQ60-PR-05

chefiqlogotype ® Smart Thermometer™ User Guide Perfect cooking, guaranteed™. Discover. Create. Plate IMPORTANT SAFEGUARDS Basic safety precautions should always be followed, including: READ ALL THE INSTRUCTIONS 1. Use the Smart Thermom- eter™ for its intended purpose only. For use with food only. 2. CAUTION: The probe gets HOT! Do not touch the probe with bare hands during or after cooking. 3. To reduce the risk of electri- cal shock, do not submerge the hub in water or other liquids. 4. To avoid damage to the Smart Thermometer™, insert the probe into food to where the probe widens. The internal components near the tip have a max temperature of 225°F. Tem- peratures above that can damage the probe. When cooking, ensure that the exposed end of the probe does not touch hot cooking surfaces. 5. Do not use the Smart Ther- mometer™ when microwav- ing or pressure cooking. 3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. 4. Consult the dealer or an experienced radio/TV technician for help. To satisfy RF exposure require- ments, a separation distance of 20 cm or more should be maintained between the anten- na of this device and persons during device operation. To ensure compliance, operations at closer than this distance is not recommended. ISED REGULATORY COMPLIANCE This device contains licence-ex- empt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Develop- ment Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interfer- ence that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appa- reils radio exempts de licence. L’exploitation est autorisée aux Commercial Use Damage that occurs from commercial use. Normal Wear and Tear Damage or degradation expect- ed to occur due to normal use over time. Altered Products Damage that occurs from alter- ations or modifications by any entity other than ® such as the removal of the rating label affixed to the product. Catastrophic Events Damage that occurs from fire, floods, or natural disasters. Loss of Interest/Buyer’s Re- morse Claims of loss of interest or enjoyment. 6. After using, let the probe- cool, then clean as directed. Dry completely before storing. 7. Do not drop the Smart Thermometer™ on a hard surface. 8. Though the probe is top- rack dishwasher safe, it’s better to hand wash it. Use warm, soapy water, and rinse and dry it well. Do not use scouring pads or abrasive cleaners, which will scratch it. 9. The Smart Thermome- ter™ probe is waterproof. However, avoid drastic changes in temperature; for example, do not plunge it in ice water when hot. 10. Store the probe in the charging nest or in the lid of the Smart Hub™. Be sure it is completely dry before storing. 11. The probe is SHARP! Care should be exercised when handling the probe. This appliance should not be used by or near children or individuals with certain disabilities. 12. Take care when inserting and removing the probe. Do not apply excessive pressure and avoid extreme changes in direction. deux conditions suivantes : 1. L’appareil ne doit pas produire de brouillage; 2. L’appareil doit accepter tout brouillage radioélec- trique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux radiations IC CNR-102 établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20cm entre le radiateur et votre corps. TERMS AND CONDITIONS Limited Warranty RJ Brands, LLC d/b/a ® offers a limited 1-year Warranty (the “Warranty”) available on sales through authorized distributors and retailers only. Please note that this Warranty becomes valid from the date that you connect your product with the ® App. To activate your warranty, follow these steps: HAVE A QUESTION? Please reach out to us at chefiq. com/support. Need more help? We’re here for you! Contact us at [email protected] or (888) 593-1701. Except where such liability is required by law, this Warranty does not cover, and ® shall not be liable for, inciden- tal, indirect, special, or conse- quential damages, including without limitation, damage to, or loss of use of the product, or lost sales or profits or delay or failure to perform this Warranty obligation. The remedies pro- vided herein are the exclusive remedies under this Warranty, whether based on contract, tort or otherwise. ® is a registered trade- mark of RJ Brands, LLC. Smart Thermometer™ and Smart Hub™ are trademarks of RJ Brands, LLC. 13. Consuming undercooked meats, poultry, or seafood may increase the risk of foodborne illness. To avoid this risk, cook your food to the temperatures recom- mended by the USDA. 14. Follow local regulations when recycling. California Proposition 65: (Applicable to California residents only.) WARNING: Cancer and Reproductive Harm – www.P65Warnings.ca.gov. HOUSEHOLD USE ONLY SAVE THESE INSTRUCTIONS FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. 1. Download the chefiqlogotype® App from the App Store or Google Play. 2. Connect your ® product to the app. The Warranty is non-transfer- able, applies only to the original purchaser, supersedes all other warranties, and constitutes the entire agreement…

Text truncated - open the document above for the full version.

RJBrandsLLC 030122-15 AuthoritytoActasAgent Date:June1,2022 AmericanCertificationBody,Inc. 313ParkAvenue Suite300 FallsChurch,VA22046 ToWhomItMayConcern: IntertekTestingServicesShanghai 1 isauthorizedtoactonourbehalf,untilotherwisenotified,for applicationstoAmericanCertificationBody,Inc.(ACB). Wecertifythatwearenotsubjecttodenialoffederalbenefits,thatincludesFCCbenefits,pursuantto Section5301oftheAnti-DrugAbuseActof1988,21U.S.C.862.Further,noparty,asdefinedin47 CFR1.2002(b),totheapplicationissubjecttodenialoffederalbenefits,thatincludesFCCbenefits. WealsodeclarethattheinformationprovidedtotheFCCistrueandcorrecttothebestofour knowledge(47CFR2.911(d))andwehavebeeninformedofthegranteeresponsibilities(47CFR 2.909)withregardtocertifiedequipment. Thankyou, AgencyAgreementExpirationDate:2023/5/24 By: (PrintName) ThomasTinelli_ (Signature 2 ) Title:_____RegulatoryManager______ Onbehalfof:RJBrandsLLC_ (CompanyName) Telephone:_(845)218-8701_ 1 -Ifagroup“entity”isdesignatedastheauthorizedagent,theletterofauthorizationmustidentifythoseindividualswithinthegroup whoareauthorizedtotakeactionontheapplication;oralternativelyastatementmustbeprovidedindicatingthatastheauthorized agent,anyindividualwithinthegroup“entity”isauthorizedtoactonbehalfoftheapplicant/granteeandtakeactiononthe application.See https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=33316. 2 -MustbesignedbyapplicantcontactgivenforapplicantontheFCCsite,orbytheauthorizedagentifanappropriateauthorizedagent letterhasbeenprovided.Lettersshouldbeplacedonappropriateletterhead.

RJBrandsLLC 030122-15 RequestforConfidentiality Date:June1,2022 Subject:ConfidentialityRequestfor:_____FCCID:2A2YP-CQ60PROBE PursuanttoFCC47CFR0.457(d)and0.459andICRSP-100,Section12.4,theapplicantrequeststhatapartofthe subjectFCCapplicationbeheldconfidential. TypeofConfidentialityRequestedExhibit ☐ShortTerm☒PermanentBlockDiagrams ☐ShortTermExternalPhotos ☐ShortTerm☐Permanent* 1 InternalPhotos ☐ShortTerm☒PermanentOperationDescription/TheoryofOperation ☐ShortTerm☐PermanentPartsList&Placement/BOM ☐ShortTerm☐PermanentTune-UpProcedure ☐ShortTerm☒PermanentSchematics ☐ShortTermTestSetupPhotos ☐ShortTerm☐Permanent* 3 User’sManual __RJBrandsLLC_hasspentsubstantialeffortindevelopingthisproductanditisoneofthefirstofitskindin industry.Havingthesubjectinformationeasilyavailableto"competition"wouldnegatetheadvantagetheyhave achievedbydevelopingthisproduct.Notprotectingthedetailsofthedesignwillresultinfinancialhardship. PermanentConfidentiality: Theapplicantrequeststheexhibitslistedaboveaspermanentlyconfidentialbepermanentlywithheldfrompublic reviewduetomaterialsthatcontaintradesecretsandproprietaryinformationnotcustomarilyreleasedtothepublic. Short-TermConfidentiality: Theapplicantrequeststheexhibitsselectedaboveasshorttermconfidentialbewithheldfrompublicviewfora periodof___(specifynumberofdaysnottoexceed180) 2 ___daysfromthedateoftheGrantofEquipment Authorizationandpriortomarketing.Thisistoavoidprematurereleaseofsensitiveinformationpriortomarketing orreleaseoftheproducttothepublic.ApplicantisalsoawarethattheyareresponsibletonotifyACBintheevent informationregardingtheproductortheproductismadeavailabletothepublicbeforetherequestedperiodhas expired.ACBwillthenreleasethedocumentslistedaboveforpublicdisclosurepursuanttoFCCPublicNoticeDA 04-1705. NOTEforIndustryCanadaApplications: ICcurrentlyonlydistinguishesPermanentConfidentialityexhibitsasshownabove.ShortTermconfidentialityisnot consideredapplicabletoICapplications. Sincerely, By:ThomasTinelli(DirectorofCompliance) (Signature/Title 3 )(Printname) 1 -Theasteriskeditems(*)requirefurtherinformationtobeprovidedtoACBbeforepermanentconfidentialitywillbeextendedtothese exhibits.PleaserefertoFCCKDB726920andthespecificDocumentlinkforD01foundat: https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=41731andreviewsectionII,3)regardingspecific informationthatmustaccompanytheserequests. 2 -Pleaserefertohttps://acbcert.com/documents/misc-docs/Memo-Short-Term-Vs-Standard-Confidentiality.pdfforcompletedetails. 3 -MustbesignedbyapplicantcontactgivenforapplicantontheFCCsite,orbytheauthorizedagentifanappropriateauthorizedagent letterhasbeenprovided.Lettersshouldbeplacedonappropriateletterhead.

DECLARATION We, RJ Brands LLC declare Our company’s project CHEF PROBE Model: CQ60-PR-01,CQ60-PR-02,CQ60-PR-03,CQ60-PR-04,CQ60- PR-05 are same, Except different of decal number/color on the ceramic handle. The above-mentioned statements of our company are totally true. If false, we will bear corresponding liability. Date: May 25, 2022 --------------------------- Thomas Tinelli RJ Brands LLC Te l : (845) 218-8701 Email: [email protected]

Page 1 of 4 External Photos Page 2 of 4 CQ60-PR-03 CQ60-PR-01 Page 3 of 4 CQ60-PR-02 CQ60-PR-04 Page 4 of 4 CQ60-PR-05

Step 1: Step 2: Step 3:

Page 1 of 4 Internal Photos Page 2 of 4 Page 3 of 4 Page 4 of 4 ********************************** END ***************************************

RJ Brands LLC MPE ASSESSMENT REPORT Report Type: FCC Part §2.1091, §2.1093 and §1.1307(b) assessment report Model: CQ60-PR-01, CQ60-PR-02, CQ60-PR-03, CQ60-PR-04, CQ60-PR-05 REPORT NUMBER: 220302039SHA-002 ISSUE DATE: May 30, 2022 DOCUMENT CONTROL NUMBER: TTRFFCCMPE-01_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRFFCCMPE-01_V1© 2018 Intertek Page 2 of 9 Report no.: 220302039SHA-002 Applicant: RJ Brands LLC 200 Performance Drive,Mahwah,NJ 07495 USA Manufacturer: Hzsamko Technologies Co.,Ltd. No.8,Jiaqi Road,Xianlin Street,Yuhang District,Hangzhou, China. Product Name: Smart Thermometer CHEF PROBE Type/Model: CQ60-PR-01, CQ60-PR-02, CQ60-PR-03,CQ60-PR-04,CQ60-PR-05 FCC ID: 2A2YP-CQ60PROBE SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: KDB447498 D01 General RF Exposure Guidance v06 FCC Part2.1091, FCC Part2.1093 FCC Part1.1307(b) PREPARED BY: REVIEWED BY: Project Engineer Dylan Tang Reviewer Wakeyou Wang Report No.: 220302039SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 3 of 9 Revision History Report No. Version Description Issued Date 220302039SHA-002 Rev. 01 Initial issue of report May 30, 2022 Report No.: 220302039SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 4 of 9 1 GENERAL INFORMATION 1.1 Description of Equipment Under Test (EUT) Product name: CHEF PROBE Type/Model: CQ60-PR-01, CQ60-PR-02, CQ60-PR-03, CQ60-PR-04, CQ60-PR-05 Description of EUT: The EUT is CHEF PROBE, it supports Bluetooth function. The differences between CQ60-PR-01 CQ60-PR-02, CQ60-PR-03, CQ60-PR- 04 and CQ60-PR-05 is that the decal number/color on the ceramic handle. The models PCB layout and circuit design is the same. so choose CQ60-PR-03 to test as representative. Rating: DC 3V, 0.03A Category of EUT: Class B EUT type: Table top Floor standing Product Marketing Name: CQ60-PR-01, CQ60-PR-02, CQ60-PR-03, CQ60-PR-04, CQ60-PR-05 HVIN: CQ60-PR-01, CQ60-PR-02, CQ60-PR-03, CQ60-PR-04, CQ60-PR-05 Software Version: 0.5.3 Hardware Version: H Serial numbers: 0220601-17-001(for radiation sample), 0220601-17-002(for conduction sample) Sample received date: March 31, 2022 Date of test: May 20, 2022 ~ May 30, 2022 1.2 Technical Specification Frequency Range: 2402-2480MHz Support Standards: IEEE 802.15.1 Type of Modulation: GFSK Channel Number: 3 Data Rate: 1Mbps Antenna Information: -13.71dBi, Metal antenna Report No.: 220302039SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 5 of 9 1.3 Description of Test Facility Name: Intertek Testing Services Shanghai Address: Building 86, No. 1198 Qinzhou Road(North), Shanghai 200233, P.R. China Telephone: 86 21 61278200 Telefax: 86 21 54262353 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L0139 FCC Accredited Lab Designation Number: CN1175 IC Registration Lab CAB identifier.: CN0051 VCCI Registration Lab Registration No.: R-14243, G-10845, C-14723, T-12252 A2LA Accreditation Lab Certificate Number: 3309.02 Report No.: 220302039SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 6 of 9 All tests were sub-contracted. Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng Science and Technology Park, Longhua District, Shenzhen, China 518109 Telephone: +86 (0) 755 2823 0888 Fax: +86 (0) 755 2823 0886 All tests were sub-contracted at Shenzhen UnionTrust Quality and Technology Co., Ltd, and conducted by Kieron Luo Reviewed and approved by Wakeyou Wang from Intertek Testing Services Shanghai. The test facility is recognized, certified, or accredited by the following organizations: Name: Shenzhen UnionTrust Quality and Technology Co., Ltd. Address: Unit D/E of 9/F and 16/F, Block A, Building 6, Baoneng science and technology park, Longhua district, Shenzhen, China, China 518109 Telephone: +86 (0) 755 2823 0888 Telefax: +86 (0) 755 2823 0886 The test facility is recognized, certified, or accredited by these organizations: CNAS Accreditation Lab Registration No. CNAS L9069 FCC Accredited Lab Designation Number: CN1194 IC Registration Lab CAB identifier.: CN0032 A2LA Accreditation Lab Certificate Number: 4312.01 Report No.: 220302039SHA-002 TEST REPORT TTRFFCCMPE-01_V1© 2018 Intertek Page 7 of 9 2 MPE Assessment Test result: Pass 2.1 MPE Assessment Limit Mobile device exposure for standalone operations: Frequency range E-field strength (V/m) H-field strength (A/m) B-field (uT) Equivalent plane wave power density S eq (W/m 2 ) 0-1 Hz - 3,2 × 10 4 4 × 10 4 - 1-8 Hz 10 000 3,2 × 10 4 /f 2 4 × 10 4 /f 2 - 8-25 Hz 10 000 4 000/f 5 000/f - 0,025-0,8 kHz 250/f 4/f 5/f - 0,8-3 kHz 250/f 5 6,25 - 3-150 kHz 87 5 6,25 - 0,15-1 MHz 87 0,73/f 0,92/f - 1-10 MHz 87/f 1/2 0,73/f 0,92/f - 10-400 MHz 28 0,073 0,092 2 400-2 000 MHz 1,375 f 1/2 0,0037 f 1/2 0,0046 f 1/2 f/200 2-300 GHz 61 0,16 0,20 10 Mobile device exposure for simult…

Text truncated - open the document above for the full version.

Appendix A: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.6645 0.5 PASS 2426 0.6642 0.5 PASS 2480 0.6424 0.5 PASS Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2426 BLE_1M_Ant1_2480 Appendix B: Occupied Channel Bandwidth Test Result TestMode Antenna Frequency[MHz] OCB [MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0703 --- PASS 2426 1.0789 --- PASS 2480 1.0728 --- PASS Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2426 BLE_1M_Ant1_2480 Appendix C: Maximum conducted output power Test Result Peak TestMode Antenna Frequency[MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict BLE_1M Ant1 2402 -10.432 ≤30 PASS 2426 -9.042 ≤30 PASS 2480 -8.020 ≤30 PASS Test Graphs Peak BLE_1M_Ant1_2402 BLE_1M_Ant1_2426 BLE_1M_Ant1_2480 Appendix D: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3kHz] Limit[dBm/3kHz] Verdict BLE_1M Ant1 2402 -23.675 ≤8 PASS 2426 -24.312 ≤8 PASS 2480 -23.004 ≤8 PASS Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2426 BLE_1M_Ant1_2480 Appendix E: Band edge measurements Test Result TestMod e Antenn a ChNam e Frequency[MHz ] RefLevel[dBm ] Result[dBm ] Limit[dBm ] Verdic t BLE_1M Ant1 Low 2402 -9.11 -55.00 ≤-29.11 PASS High 2480 -9.01 -56.14 ≤-29.01 PASS Test Graphs BLE_1M_Ant1_Low_2402 BLE_1M_Ant1_High_2480 Appendix F: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [MHz] RefLevel [dBm] Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 Reference -9.92 -9.92 --- PASS 30~25000 -9.92 -39.93 ≤-29.92 PASS 2426 Reference -10.26 -10.26 --- PASS 30~25000 -10.26 -51.11 ≤-30.26 PASS 2480 Reference -8.86 -8.86 --- PASS 30~25000 -8.86 -44.77 ≤-28.86 PASS Test Graphs BLE_1M_Ant1_2402_0~Reference BLE_1M_Ant1_2402_30~25000 BLE_1M_Ant1_2426_0~Reference BLE_1M_Ant1_2426_30~25000 BLE_1M_Ant1_2480_0~Reference BLE_1M_Ant1_2480_30~25000

RJ Brands LLC RF TEST REPORT Report Type: FCC Part 15.247 & ISED RSS-247 RF report Model: CQ60-PR-01, CQ60-PR-02, CQ60-PR-03, CQ60-PR-04, CQ60-PR-05 REPORT NUMBER: 220302039SHA-001 ISSUE DATE: May 30, 2022 DOCUMENT CONTROL NUMBER: TTRF15.247-02_V1 © 2018 Intertek Intertek Testing Services Shanghai Building No.86, 1198 Qinzhou Road (North) Caohejing Development Zone Shanghai 200233, China Telephone: 86 21 6127 8200 www.intertek.com TEST REPORT This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. TTRF15.247-02_V1 © 2018 Intertek Page 2 of 30 Report no.: 220302039SHA-001 Applicant: RJ Brands LLC 200 Performance Drive,Mahwah,NJ 07495 USA Manufacturer: Hzsamko Technologies Co.,Ltd. No.8,Jiaqi Road,Xianlin Street,Yuhang District,Hangzhou, China. Product Name: Smart Thermometer CHEF PROBE Type/Model: CQ60-PR-01, CQ60-PR-02, CQ60-PR-03,CQ60-PR-04,CQ60-PR-05 FCC ID: 2A2YP-CQ60PROBE IC: 27740-CQ60PROBE SUMMARY: The equipment complies with the requirements according to the following standard(s) or Specification: 47CFR Part 15 (2020): Radio Frequency Devices (Subpart C) ANSI C63.10 (2013): American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices RSS-247 Issue 2 (February 2017): Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence-Exempt Local Area Network (LE-LAN) Devices RSS-Gen Issue 5 (February 2021) Amendment 2: General Requirements for Compliance of Radio Apparatus PREPARED BY: REVIEWED BY: Project Engineer Dylan Tang Reviewer Wakeyou Wang Report No.: 220302039SHA-001 TEST REPORT TTRF15.247-02_V1 © 2018 Intertek Page 3 of 30 Content REVISION HISTORY................................................................................................................................................ 5 MEASUREMENT RESULT SUMMARY ..................................................................................................................... 6 1 GENERAL INFORMATION ............................................................................................................................. 7 1.1 DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ..................................................................................................... 7 1.2 TECHNICAL SPECIFICATION .................................................................................................................................... 7 1.3 DESCRIPTION OF TEST FACILITY .............................................................................................................................. 8 2 TEST SPECIFICATIONS ................................................................................................................................. 10 2.1 STANDARDS OR SPECIFICATION ............................................................................................................................. 10 2.2 MODE OF OPERATION DURING THE TEST ................................................................................................................. 10 2.3 TEST SOFTWARE LIST .......................................................................................................................................... 11 2.4 TEST PERIPHERALS LIST ....................................................................................................................................... 11 2.5 TEST ENVIRONMENT CONDITION: .......................................................................................................................... 11 2.6 INSTRUMENT LIST .............................................................................................................................................. 12 2.7 MEASUREMENT UNCERTAINTY ............................................................................................................................. 13 3 MINIMUM 6DB BANDWIDTH ..................................................................................................................... 14 3.1 LIMIT .............................................................................................................................................................. 14 3.2 MEASUREMENT PROCEDURE ............................................................................................................................... 14 3.3 TEST CONFIGURATION ........................................................................................................................................ 14 3.4 TEST RESULTS OF MINIMUM 6DB BANDWIDTH ....................................................................................................... 14 4 MAXIMUM CONDUCTED OUTPUT POWER AND E.I.R.P. ............................................................................. 15 4.1 LIMIT .............................................................................................................................................................. 15 4.2 MEASUREMENT PROCEDURE ............................................................................................................................... 15 4.3 TEST CONFIGURATION ............................................…

Text truncated - open the document above for the full version.

Page 1 of 3 Test Setup Page 2 of 3 1. Radiated Emission Below 1GHz Above 1GHz Page 3 of 3 2. Conducted RF Test