2A36Q-SKIMTrue wireless headphone

SKIM Battery 35mAh Built-in Lithium Battery Case battery 350mAh Lithium Battery Charge time 1.5 hrs Frequency: 20-- 20 KHZ Microphone Type MEMS Omni-directional Sensitivity 42±3dB @1kHz Mic frequency range 100Hz~10KHz Operating temperature -0c 45c Bluetooth V5.3 IPX Rating IPX 4 Play Time 4.5 hrs (1 charge) total 20hrs The Declarationof Conformity can be foundat: https://www.boompods.com/product/bassline compact Hereby, Boompodsdeclares that the radio equipment type [Earphone with Bluetooth]is in compliance with Directive 2014/53/EU. FCC ID: 2A36Q-SKIM Charge points Charging case USB-C charge cableEar-tips Touch panel Mic LED How to ConnectIn the Box Touch Controls Charge EarbudsBattery Level Charge Case LED LED LED Your earbuds come pre-set as below but you can customise to how you want through the boompods APP If not connected earbuds will power down after 5 mins Note: once you have followed this procedure, the next time you remove from chargi ng case earbuds will connect to your phone automatically. Once connected LED will flash Blue slowley In the unlikely case of any pairing problem Place earbuds into charging case and go to the Boompods App and select Reset. Reset LED Battery level 100%/80% Battery level 80% - 50% Battery level Below 20% But how is this possible? I mean, this was plastic waste! Yes. But when it comes to the most common used materials we’re collecting, for instance PET bottles, this waste already had food grade during its first lifecycle. After collecting it, our local teams are washing and sorting the plastic which is then shredded into flakes. After this step, the innovative technology we have developed with the Swiss University of Applied Sciences OST, takes over: We transform these flakes into pellets in a pure mechanical process, neither chemicals nor virgin plastics are being added. We use the latest technology and apply physical methods (vacuum, decompression, degassing, melting) to transform waste and extend the molecular chains of these wasted polymers. The result is a strong, clean and reliable material. The sustainably made true wireless earbuds SIRI GOOGLE FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

-BoompodsEUSp.zo.o- TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotifytheFCC. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 3/28/23 U.S.AgentDesignation [BoompodsEUSp.zo.o]acknowledgestheirconsentforthefollowingcontactlocatedintheUnited Statestoactastheiragentforserviceofprocessfortheequipmentforwhichauthorizationissought (FCCID:[2A36Q-SKIM]): NameandcompanyofU.S.agent:NipocInc PhysicalU.S.addressofagent:138GreymonDr.,WestPalmBeach,FL33405,USA FRNofU.S.agent:0033584798 EmailaddressofU.S.agent:[email protected] [NipocInc]acknowledgestheirobligationtoacceptserviceofprocessonbehalfof[BoompodsEUSp. zo.o]. [BoompodsEUSp.zo.o]acceptsitsobligationtomaintainanagentforserviceofprocessinthe UnitedStatesfornolessthanoneyearaftereitherthegranteehaspermanentlyterminatedall marketingandimportationoftheapplicableequipmentwithintheU.S.,ortheconclusionofany Commission-relatedadministrativeorjudicialproceedinginvolvingtheequipment,whicheverislater. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(d)(7). Sincerely, Signature DavidTansley Director BoompodsEUSp.zo.o Signature 4 8 _ [ m o d e l ] U S _ A g e n t _ 2 . 9 1 1 ( d ) ( 7 ) - U , V 0 3 -BoompodsEUSp.zo.o- TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. Anexpirationdateforthisletterdoesnotexist.IncasetheU.S.agentchanges,thegranteeisobligatedtonotifytheFCC. JoseCopin DirectorSales&Marketing NipocInc

-BoompodsEUSp.zo.o- TheinformationprovidedinthisletterisbasedonthereferencedrulepartsofTitle47oftheCFRaswellasKDB986446D01. FederalCommunicationsCommission AuthorizationandEvaluationDivision EquipmentAuthorizationBranch 7435OaklandMillsRoad Columbia,MD21046 3/29/23 Towhomitmayconcern: We,[BoompodsEUSp.zo.o],herebycertifythattheequipmentforwhichauthorizationissought (FCCID:[2A36Q-SKIM])isnot“covered”equipmentprohibitedfromreceivinganequipment authorizationpursuantto§2.903oftheFCCrules. Wealsocertifythat,asofthedateofthefilingoftheapplication,wearenotidentifiedontheCovered List(https://www.fcc.gov/supplychain/coveredlist)asanentityproducing“covered”equipment. Bysigningthisform,weconfirmtheaboveandthatweareawareoftheapplicationrequirements listedunder§2.911(b)and(d)(5)and(6). Sincerely, Signature JayCheung Director BoompodsEUSp.zo.o 6 2 _ [ m o d e l ] C o v e r e d E q u _ 2 . 9 1 1 ( d ) ( 5 ) ( i ) a n d ( i i ) - U , V 0 2

Code:AB-RF-05-b ExternalPhotograph Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b

LabelLocationOnEUT Theproductistoosmalltoplacecompletelabelinformation,sothelabelisplacedin thechargingbinandusermanual.

Code:AB-RF-05-b InternalPhotograph Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b Code:AB-RF-05-b ANT

version01 BoompodsEUSp.zo.o DeclarationconcerningAntennaSpecification Itisherebydeclaredthattheproduct ModelNo.:Skim FCCID:2A36Q-SKIM fulfillstherequirementinFCCtestrelatingtotheantennatype. ThedevicespecifiedaboveconfirmstotheFCCrecommendationsfor internal antennatype(s) describedbelow: ModelNo.ofantenna:N/A Typeofantenna:Ceramicantenna Gainoftheantenna:-0.58dBi Frequencyrange:2400-2500MHz Themountingoftheantennaisfixedtotheradiomoduleandnootherantennashouldbeused. Companyname: BoompodsEUSp.zo.o Address: ul.Barbary16Granica05-806KomorówPoland City: Komorów ZIP/Postalcode: / Country: Poland Place: KomorówDate:3/29/2023 Signature:

Features 1.Surface Mounted Devices with a small dimension of 2.0 x 1.25 x 0.25 mm 3 meet future miniaturization trend. 2.Embedded and LTCC (Low Temperature Co-fired Ceramic) technology is able to future integrate with system design as well as beautifying the housing of final product. 3. High Stability in Temperature / Humidity Change Applications 1. Bluetooth 2. Wireless LAN 3. HormRF 4. ISM band 2.4GHz wireless applications Dimensions（Unit：mm） . . Page 1 P/N:Skim Page 2 Type2 : Type3 : PCB Bottom View : Evaluation Board and Matching Circuits Electrical Characteristics www.surbaner.com.cn SUR Communication has possession of proprietary information provided in this report and this proprietary information shall be kept in strict confidence and not disclosed to any person or firm without the prior written consent of SUR Communication Technology. . . Page 3 No. ItemSpecifications 5.1 Working Central Frequency (After matching) 2450 MHz 5.2 Band Width 86MHz typ. 5.3 Peak Gain -0.58 dBi 5.4 R.L. ≥7 5.5 Polarization Linear 5.6 Azimuth Beam width Omni-directional 5.7 Impedance 50 Ω Characteristic curve Radiation Pattern Pag e 4 Frequency(MHz)240024502500 Efficiency (dB) -2.82 -2.04 -2.41 Efficiency (%) 52.19 62.42 58,21 Gain (dBi) -0.58 - 0.67 -0.63

RFEXPOSUREEVALUATION FCCID:2A36Q-SKIM AccordingtoFCC1.1310:Thecriterialistedinthefollowingtableshallbeused toevaluatetheenvironmentimpactofhumanexposuretoradiofrequency(RF) Radiationasspecifiedin§1.1307(b): RoutineSARevaluationreferstothatspecificallyrequiredby§2.1093,using measurementsorcomputersimulation.WhenroutineSARevaluationisnot required,portabletransmitterswithoutputpowergreaterthantheapplicable lowthresholdrequireSARevaluationtoqualifyforTCBapproval. Channel (MHz) Maximum output power (dBm) Tuneup tolerance (dBm) MaxTuneUp Power(dBm) Distance (mm) Calculation results Limit Operating Mode 24022.422.42±1 3.42050.681 3 GFSK24412.592.59 ±13.59050.714 3 24803.23.2±14.20050.8283 24023.423.42±1 4.42050.858 3 π/4-DQPSK24413.323.32 ±14.32050.845 3 24803.843.84±14.84050.9603 2402-0.04-0.04±1 0.96050.387 3 BLE24400.80.8 ±11.80050.473 3 24800.430.43±11.43050.4383 Result:NoStandaloneSARtestisrequired.

Page1of14 AppendixTestData ReportNo.:11340WC30000702TestDate:2023.02.13 TestEngineer:Auditor: Temperature:24.3 °C Relative Humidity: 56.2% Pressure:1012hPa Page2of14 1.-6dBBandwidth ConditionAntennaRateFrequency(MHz)-6dBBW(kHz)limit(kHz)Result NVNTANT11Mbps2402662.91500Pass NVNTANT11Mbps2440.00665.26500Pass NVNTANT11Mbps2480663.64500Pass -6dB_Bandwidth_NVNT_ANT1_1Mbps_2402 -6dB_Bandwidth_NVNT_ANT1_1Mbps_2440 Page3of14 -6dB_Bandwidth_NVNT_ANT1_1Mbps_2480 Page4of14 2.99%OccupiedBandwidth ConditionAntennaRateFrequency(MHz)99%%BW(MHz) NVNTANT11Mbps24021.032 NVNTANT11Mbps2440.001.035 NVNTANT11Mbps24801.035 99%_Occupied_Bandwidth_NVNT_ANT1_1Mbps_2402 99%_Occupied_Bandwidth_NVNT_ANT1_1Mbps_2440 Page5of14 99%_Occupied_Bandwidth_NVNT_ANT1_1Mbps_2480 Page6of14 3.Bandedge ConditionAntennaRate TX_Frequency (MHz) Max.MarkFrequency (MHz) Spurious level(dBm) limit(dBm)Result NVNTANT11Mbps24022322.07-56.44-20.12Pass NVNTANT11Mbps24802483.57-59.11-19.74Pass 1_Reference_Level_NVNT_ANT1_1Mbps_2402 2_Bandedge_NVNT_ANT1_1Mbps_2402 Page7of14 1_Reference_Level_NVNT_ANT1_1Mbps_2480 2_Bandedge_NVNT_ANT1_1Mbps_2480 Page8of14 4.PeakOutputPower ConditionAntennaRate Frequency (MHz) Max.Conducted Power(dBm) Max.Conducted Power(mW) Limit(mW)Result NVNTANT11Mbps2402-0.040.991000Pass NVNTANT11Mbps2440.000.801.201000Pass NVNTANT11Mbps24800.431.101000Pass Peak_Output_Power_NVNT_ANT1_1Mbps_2402 Peak_Output_Power_NVNT_ANT1_1Mbps_2440 Page9of14 Peak_Output_Power_NVNT_ANT1_1Mbps_2480 Page10of14 5.PowerSpectralDensity ConditionAntennaRateFrequency(MHz)PowerSpectralDensity(dBm)Limit(dBm/3kHz)Result NVNTANT11Mbps2402-15.548Pass NVNTANT11Mbps2440.00-13.148Pass NVNTANT11Mbps2480-15.528Pass Power_Spectral_Density_NVNT_ANT1_1Mbps_2402 Power_Spectral_Density_NVNT_ANT1_1Mbps_2440 Page11of14 Power_Spectral_Density_NVNT_ANT1_1Mbps_2480 Page12of14 6.SpuriousEmission ConditionAntennaRateTX_Frequency(MHz)SpuriousMAX.Value(dBm)LimitResult NVNTANT11Mbps2402-47.79-20.12Pass NVNTANT11Mbps2440.00-41.16-19.34Pass NVNTANT11Mbps2480-48.10-19.74Pass 1_Reference_Level_NVNT_ANT1_1Mbps_2402 2_Spurious_Emission_NVNT_ANT1_1Mbps_2402 Page13of14 1_Reference_Level_NVNT_ANT1_1Mbps_2440 2_Spurious_Emission_NVNT_ANT1_1Mbps_2440 Page14of14 1_Reference_Level_NVNT_ANT1_1Mbps_2480 2_Spurious_Emission_NVNT_ANT1_1Mbps_2480

ReportNo.:78340WC30000702FCCID:2A36Q-SKIMPage1of30 Code:AB-RF-05-b FCCTestReport ClientName:BoompodsEUSp.zo.o ClientAddress: ul.Barbary16Granica05-806Komorów Poland ProductName:Truewirelessheadphone ReportDate:Mar.27,2023 ShenzhenAnbotekComplianceLaboratoryLimited ReportNo.:78340WC30000702FCCID:2A36Q-SKIMPage2of30 Code:AB-RF-05-b Contents 1.GeneralInformation ............................................................................................................................................6 1.1.ClientInformation ....................................................................................................................................6 1.2.DescriptionofDevice(EUT) ..................................................................................................................6 1.3.AuxiliaryEquipmentUsedDuringTest .................................................................................................7 1.4.DescriptionofTestConfiguration ..........................................................................................................7 1.5.DescriptionOfTestSetup ......................................................................................................................8 1.6.TestEquipmentList .................................................................................................................................9 1.7.MeasurementUncertainty ....................................................................................................................10 1.8.DescriptionofTestFacility ...................................................................................................................10 2.SummaryofTestResults .................................................................................................................................11 3.ConductedEmissionTest ................................................................................................................................12 3.1.TestStandardandLimit ........................................................................................................................12 3.2.TestSetup ...............................................................................................................................................12 3.3.TestProcedure .......................................................................................................................................12 3.4.TestData .................................................................................................................................................12 4.RadiationSpuriousEmissionandBandEdge .............................................................................................15 4.1.TestStandardandLimit ........................................................................................................................15 4.2.TestSetup ...............................................................................................................................................15 4.3.TestProcedure .......................................................................................................................................16 4.4.TestData .................................................................................................................................................17 5.MaximumPeakOutputPowerTest ...............................................................................................................25 5.1.TestStandardandLimit ........................................................................................................................25 5.2.TestSetup ...............................................................................................................................................25 5.3.TestProcedure .......................................................................................................................................25 5.4.TestData .................................................................................................................................................25 6.6DBOccupyBandwidthTest ..........................................................................................................................26 6.1.TestStandardandLimit ........................................................................................................................26 6.2.TestSetup ...............................................................................................................................................26 6.3.TestProcedure .......................................................................................................................................26 6.4.TestData .................................................................................................................................................26 7.PowerSpectralDensityTest ...........................................................................................................................27 7.1.TestStandardandLimit ........................................................................................................................27 7.2.TestSetup ...............................................................................................................................................27 7.3.TestProcedure .......................................................................................................................................27 7.4.TestData .................................................................................................................................................27 8.100kHzBandwidthofFrequencyBandEdgeRequirement ......................................................................28 ReportNo.:78340WC30000702FCCID:2A36Q-SKIMPage3of30 Code:AB-RF-05-b 8.1.TestStandardandLimit .............................................................................................…

Text truncated - open the document above for the full version.

Code:AB-RF-05-b TestSetupPhotograph PhotoofConductedEmissionMeasurement PhotoofRadiationEmissionTest Code:AB-RF-05-b