2A36T-RCP06Q09-91

Recapper Module Supplemental Manual For use with the GLP systems Track Laboratory Automation System and the Recapper Module 80004210-101 DRAFT Table of contents Read me first................................................................................................................5 General safety information...................................................................................................7 Proprietary statement..........................................................................................................8 Section 1: Use or function............................................................................................9 Recapper Module overview................................................................................................10 Design and function.................................................................................................10 Descriptions of module statuses..............................................................................17 Section 2: Installation procedures and special requirements......................................19 Recapper Module installation requirements......................................................................20 Main menu screen..............................................................................................................22 Login screen.............................................................................................................22 Information screen...................................................................................................24 Configuration screen................................................................................................24 Section 3: Principles of operation...............................................................................27 Section 4: Performance characteristics and specifications..........................................29 Technical data.....................................................................................................................30 Sample processing specifications.............................................................................31 Section 5: Operating instructions................................................................................33 Recapper Module operation...............................................................................................34 Open and close the front and rear module covers..................................................34 Cycle power to the module......................................................................................36 Power on the module...............................................................................................38 Power off the module..............................................................................................39 Place the module online...........................................................................................39 Place the module offline..........................................................................................40 Pause the module....................................................................................................40 Deactivate pause mode............................................................................................41 Replace revolvers.....................................................................................................41 Disable the supply of small tube or large tube ReCaps............................................44 Enable the supply of small tube or large tube ReCaps.............................................44 Section 6: Operational precautions and limitations....................................................47 Section 7: Hazards......................................................................................................49 Safety icons.........................................................................................................................50 Section 8: Service, maintenance, and diagnostics.......................................................53 Cleaning and maintenance checks......................................................................................54 Cleaning..............................................................................................................................55 Weekly cleaning procedures....................................................................................55 As-needed cleaning procedures...............................................................................56 Maintenance.......................................................................................................................60 As-needed maintenance procedures.......................................................................60 Recapper Module - Supplemental Manual 80004210-101 DRAFT - 2023-XX-XX 3 Section 9: Troubleshooting.........................................................................................63 Message codes....................................................................................................................64 Message code screen...............................................................................................65 Recapper Module observed problems................................................................................86 CAR with sample does not move to the module......................................................86 CAR with sample is not held in place at the AccessPoint.........................................87 CAR stops at the AccessPoint and then will not move.............................................87 Samples are not sealed............................................................................................87 ReCaps are lost.........................................................................................................87 Error message is displayed..........................…

Text truncated - open the document above for the full version.

a Abbott Swen Gri.initz-Post Konstantinos Varlas Bradley Jay Slater Christian Grapow Geschaftsfuhrer Abbott Automation Solutions GmbH • Sachsenkamp s · 20097 Hamburg Federal Communication Commission Abbott Automation Solutions GmbH Sachsenkamp 5 20097 Hamburg T. +49 40 809051000 Subject: Cover Letter for FCC application for Certification of FCC ID: 2A36T-RCP TO WHOM IT MAY CONCERN: This application is to seek an original certification on the Recapper Module SL Double (List Number: 06Q09-91) of the Abbott Automation Solutions GLP systems Track, as compliant with the following FCC standards below: • FCC Part 15.225 Operation within the band of 13.110-14.010 MHz • FCC Part 15.207 Conducted Limits • FCC Part 15.209 Radiated Emissions Limits; General requirements The Recapper Module (RM) uses a conical, plastic cap to seal tubes before they are stored by using the track on the Archive II o r before they are manually stored after output by using the IOM. This device contains 2 Access Points (1 RFID reader each) and 1 Cross Switch (2 RFID readers each). EUT Model Name EUT List Number FCCID Recapper Module SL Double 06Q09-91 2A36T-RCP Table 1: EUT Identification Numbers The RFID readers are fully integrated 13.56 MHz Analog-front-end Data-Framing Reader RFID systems for fixed use, operating in accordance with ISO 15693. Radio Chip Information Radio Frequency RFID Access Point 1 Texas Instrument 13.56MHz TRF7960 RFID Access Point 2 Texas Instrument 13.56MHz TRF7960 Texas Instrument 13.56MHz RF I D Cross Switch R eader 1 TRF7960 Table 2. All RFID radios within device Signature Birgit Nowak Manager Regulatory Affairs Abbott Automation Solutions GmbH [20230623_FCC Request for Confidentiality Letter USA] Date Sitz der Gesellschaft: Amtsgericht Hamburg HRB 157360 • VAT DE326591684 UniCredit Bank AG • IBAN DE78 2003 0000 0613 540111 • BIC HYVEDEMM 300 R FI D Cross Switch R eader 2 Texas Instrument TRF7960 13.56MHz

SEE ELECTRONIC REVISION HISTORY REPORT SCALE SIZE DWG NO. REV. DO NOT SCALE DRAWING B SHEET 1 OF 1 1/1 ABBOTT DIAGNOSTIC DIVISIONABBOTT LABORATORIES1921 HURD DRIVE IRVING, TEXAS 75038, USA DWN BY: DATE: APPLIED FINISH: None THREADS CLASS 2A OR 2B REMOVE BURRS AND SHARP EDGES .02 MAX. UNLESS OTHERWISE SPECIFIED: DIMENSIONS IN INCHES TOLERANCES ANGULAR ± 2° 63 .XX ± .02 .XXX ± .010 CONFIDENTIAL INFORMATION CONTAINS TRADE SECRET AND/OR CONFIDENTIAL INFORMATION WHICH IS THE PROPERTY OF ABBOTT LABORATORIES. AS PROVIDED BY 21CFR 20.61, DO NOT DISCLOSE TO THE PUBLIC. TITLE: MATERIAL: 2 D. Dominguez 03/13/23 NOTES: UNLESS OTHERWISE SPECIFIED PURCHASED LABEL 1. PRINT PER LABEL CONTENT SHOWN. 2 PRINTING SPECIFICATION: INK COLOR - BLACK BACKGROUND - WHITE MATERIAL - 2mil POLYESTER with 1 mil CLEAR OVERCOAT ADHESIVE - 1.8 mil #350 ACRYLIC LABEL SIZE - 2.0 x 1.0 ± .02 CORNER RADIUS - .05 ± .02 ROLL SIZE - 500, MAX INNER DIE CUT: 1.25 x 0.5 ± .02 4. DIE CUT TO LINER. PERFORATE LINER BETWEEN LABELS. PART NUMBER TO BE PRINTED ON THE WASTE MATRIX. 5. LABEL MUST CONFORM TO UL 969 AND CSA 22.2 NO. 0.15-95 AND SHALL BE UL APPROVED MATERIAL, WITH SUPPLIER NAME AND LABEL NAME OR DESIGNATION ON INSIDE OF ROLL CORE . 6. LABEL MUST BE PROCURED FROM UL AUTHORIZED SUPPLIER. 7. REFERENCE S14913. 8. THIS PART IS A U.L. CRITICAL PART. ANY CHANGES TO THIS PART MUST BE REVIEWED BY EMC/SAFETY GROUP. LABEL TO BE U.L. RECOGNIZED COMPONENT CATEGORY PGDQ2/PGDQ8. EMC/SAFETY GROUP MUST REVIEW ALL SUPPLIERS. 9. THIS PART/ASSEMBLY SHALL BE COMPLIANT PER THE LATEST REVISION OF ABBOTT SPECIFICATION S205053. 2 3 3 SHEET 1 OF 1 1/1 A LABEL, RCP FCC – IC ID 80005178-101 (80005178-101) FCC ID: 2A36T-RCP IC: 28384-RCP 80005178 - 101 Rev A , Released - Effective on : 04 - Apr - 2023 - Confidential - Page 1 of 1 102 51 R2 UNIT Product of Germany THIS PART IS A U.L. CRITICAL PART. ANY CHANGES TO THIS PART MUST BE REVIEWED BY EMC/SAFETY GROUP. LABEL TO BE U.L. RECOGNIZED COMPONENT CATEGORY PGJI2 OR PGDQ2. RIBBON TO BE U.L. RECOGNIZED CATEGORY PGGU2. EMC/SAFETY GROUP MUST REVIEW ALL SUPPLIERS. Fonts: 1) Calibri 11 bold 2) Calibri 8 bold 3) Calibri 8 normal 4) Calibri 7 normal 5) Calibri 7 bold 6) Arial 7 bold 7) Calibri 10 normal 4 1 2 3 4 3 3 5 3 3 3 7 7 7 7 Item -No. TitleArticle-No. 1Etikett 5" Polyester ws glanz30006224-101 2Transferfolie Harz sw30006291-101 A B C D E F A B C D E 1234 4321 FF 0.00 g 20034352 Refer to protection notice ISO 16016Replaced by:Replacement for: Title General tolerances Material Scale Standard Cre. Drw. Surface finish DateSignature 1:1 Cre. Part Sheet Weight: 1 / 1 05.12.2022 DIN ISO 2768 - mK NameDateChangeRev. DIN ISO 1302 See Bill of Material Article No. Device Label kiw Revision Appv`d Sale No. kiw10.02.2023 12792 Sachsenkamp 5, 20097 Hamburg 14.02.2023evg 20039879-101 Recapper Module SL Double 06Q09-91 M25Exxxxxx 00380740208721 (20039879-101) GLP systems Track Data matrix code Recapper Module SL Double Abbott Automation Solutions GmbH Sachsenkamp 5 20097 HAMBURG GERMANY +49 40 809051-111 M25Exxxxxx 06Q09-91 (12792 A) YYYY-MM-DD (01)(240) 1 (21) 179W AC 220 V - 230 V ́50/60 Hz 86W /net power Ptyp P max 216 Volt Amps Max A 20039879-101 Rev A, Released - Effective on: 20-Sep-2023 - Confidential - Page 1 of 1

This report must not be used to claim product certification, approval, or endorsement by A2LA or any agency of the U.S. Government. This Report shall not be reproduced, except in full without written approval of the laboratory. Abbott Laboratories Recapper Module SL Double FCC 15.225:2023 RSS-210 Issue 10:2019+A1:2020 RSS-Gen Issue 5:2018+A1:2019+A2:2021 13.56 MHz Radio Report: ABBO0283.2 Rev. 1, Issue Date: December 21, 2023 TABLE OF CONTENTS 2023.04.17 Section Page Number Certificate of Test ............................................................................................ 3 Revision History .............................................................................................. 4 Accreditations .................................................................................................. 5 Facilities .......................................................................................................... 6 Measurement Uncertainty ............................................................................... 7 Test Setup Block Diagrams ............................................................................. 8 Product Description ......................................................................................... 11 Power Settings and Antennas ......................................................................... 12 Configurations ................................................................................................. 13 Modifications ................................................................................................... 16 Powerline Conducted Emissions ..................................................................... 17 Field Strength of Fundamental ........................................................................ 34 Field Strength of Spurious Emissions (Less Than 30 MHz) ............................ 45 Field Strength of Spurious Emissions (Greater Than 30 MHz)........................ 50 Frequency Stability .......................................................................................... 53 Emissions Bandwidth (20 dB) ......................................................................... 67 Occupied Bandwidth ....................................................................................... 70 End of Report .................................................................................................. 73 Report No. ABBO0283.2 Rev. 12/73 CERTIFICATE OF TEST 2022.04.01 Product compliance is the responsibility of the client; therefore, the tests and equipment modes of operation represented in this report were agreed upon by the client, prior to testing. The results of this test pertain only to the sample(s) tested. The specific description is noted in each of the individual sections of the test report supporting this certificate of test. This report reflects only those tests from the referenced standards shown in the certificate of test. It does not include inspection or verification of labels, identification, marking or user information. As indicated in the Statement of Work sent with the quotation, Element’s standard process is to always use the latest published version of the test methods even when earlier versions are cited in the test specification. Issuance of a purchase order was de facto acceptance of this approach. Otherwise, the client would have advised Element in writing of the specific version of the test methods they wanted applied to the subject testing. Last Date of Test: October 18, 2023 Abbott Laboratories EUT: Recapper Module SL Double Radio Equipment Testing Standards Specification Method FCC 15.207:2023 ANSI C63.10:2013 FCC 15.225:2023 RSS-210 Issue 10:2019+A1:2020 RSS-Gen Issue 5:2018+A1:2019+A2:2021 Results Test Description Result FCC Section(s) RSS Section(s) ANSI C63.10 Section(s) Comments Powerline Conducted Emissions Pass 15.207 RSS-Gen 8.8 6.2 Field Strength of Fundamental Pass 15.225(a)-(c) RSS-210 B.6(a)(i-iv) 6.4 Field Strength of Spurious Emissions (Less Than 30 MHz) Pass 15.225(d), 15.209 RSS-210 B.6(a)(iv) 6.4 Field Strength of Spurious Emissions (Greater Than 30 MHz) Pass 15.225(d), 15.209 RSS-210 B.6(a)(iv) 6.5 Frequency Stability Pass 15.225(e), 15.31(e), 15.215(c), 2.1055 RSS-210 B.6(b) 6.8 Emissions Bandwidth (20 dB) Pass 15.215(c) N/A 6.9.2 Occupied Bandwidth 99% Pass N/A RSS-Gen 6.7 6.9.3 Deviations From Test Standards None Approved By: Adam Bruno, Operations Manager Report No. ABBO0283.2 Rev. 13/73 REVISION HISTORY 2018.07.17 Revision Number Description Date (yyyy-mm-dd) Page Number 01 Corrected misaligned ANSI section notations. 2023-12-21 3 Added converted SRE data for RSS to existing module page. 2023-12-21 45-49 Report No. ABBO0283.2 Rev. 14/73 ACCREDITATIONS AND AUTHORIZATIONS 2021.09.01 United States FCC - Designated by the FCC as a Telecommunications Certification Body (TCB). Certification chambers, Open Area Test Sites, and conducted measurement facilities are listed with the FCC. A2LA - Each laboratory is accredited by A2LA to ISO / IEC 17025, and as a product certifier to ISO / IEC 17065 which allows Element to certify transmitters to FCC and IC specifications. Canada ISED - Recognized by Innovation, Science and Economic Development Canada as a Certification Body (CB) and as a CAB for the acceptance of test data. European Union European Commission – Recognized as an EU Notified Body validated for the EMCD and RED Directives. United Kingdom BEIS – Recognized by the UK as an Approved Body under the UK Radio Equipment and UK EMC Regulations. Australia/New Zealand ACMA - Recognized by ACMA as a CAB for the acceptance of test data. Korea MSIT / RRA - Recognized by KCC’s RRA as a CAB for the acceptance of test data. Japan VCCI - Associate Member of the VCCI. Conducted and radiated measurement facilities are registered. Taiwan BSMI – Recognized by BSMI as a CAB for the acceptance of test data. NCC - Recognized by NCC as a CAB for the acceptance of test data. …

Text truncated - open the document above for the full version.

POWERLINE CONDUCTED EMISSIONS WTD.2023.10.09.0 EmiR5 2022.07.06.0 PSA-ESCI 2023.04.25.0 DIRECT CONNECT WTD.2023.08.03.0 EmiR5 2022.07.06.0 PSA-ESCI 2023.04.25.0 Report No. ABBO02832/3 DIRECT CONNECT WTD.2023.08.03.0 EmiR5 2022.07.06.0 PSA-ESCI 2023.04.25.0 Report No. ABBO02833/3