2A4AW-AUTOBLOWULTRAMotorized Penis Stroking Machine With Detachable Stroker

Vor der Nutzung können Sie die Saugsteuerung anpassen, indem Sie die Endkappe am Gehäuse drehen. SAUGKONTROLLE ZUGRIFF AUF INTERNETFUNKTIONEN Sie können Ihren Autoblow AI Ultra mit dem Internet verbinden, um auf eine Reihe von Online-Features zuzugreifen. Bitte gehen Sie auf Autoblowme.com, um Anweisungen zur Internetverbindung und Videoanleitungen zu erhalten. Sie können hierfür auch den folgenden QR-Code scannen: ACHTUNG WENN SIE DEN DECKEL ZU FEST ANZIEHEN, FUNKTIONIERT DAS GERÄT MÖGLICHERWEISE NICHT RICHTIG. EN 10 min Pause Faster Slower Start/Next mode Power On/Off MODE SPEEDS ELECTRICAL WARNING SOAP click click 1 2 3 4 5 6 7 WARNINGS Connect the power supply cable to the top of the Autoblow AI Ultra and plug it into any electrical outlet (120v-240v). The device must remain plugged into the wall outlet during use. This product does not contain batteries. STEP 1 : PLUG IT IN STEP 2 : TURN IT ON Press and briey hold the power button until the LEDs turn on. STEP 3  INSERT THE STROKER First, insert a sleeve into the stroker case. Then, holding the machine upside down, drop the stroker case into the Autoblow with the small end facing downwards. Align the insertion guideline on the side of the stroker case with the UNLOCK symbol. Once inserted, grip the stroker case’s small end and twist it until the insertion guideline aligns with the lock symbol. You will hear a clicking sound when the stroker case is locked in. STEP 4  MOVE THE STROKER INTO POSITION Using your hand, push the stroker up from the small end until the sleeve orice reaches the opening. STEP 5  LUBE UP Generously apply a water-based lubricant both to your penis and to the interior of the sleeve and insert your penis. Every 5-10 minutes during use, apply more lubricant. DO NOT USE SILICONE LUBRICANT AS IT MAY DAMAGE THE SLEEVE MATERIAL. STEP 6  OPERATION Press to activate mode 1 and press again to cycle through the 10 dierent modes. Press the button to pause any mode. Press the button a second time to unpause. When paused, the LEDs will slowly ash BLUE. Each of the 10 modes can be enjoyed at 10 speeds. Press the and buttons to control the speed of each mode. Modes appear as single blue lights. Speeds appear as green lights. Flashing RED & YELLOW LEDs indicate the motor has temporarily overheated and the machine will stop. If this happens, turn o the machine and wait 10 minutes before trying to operate it again. EN When you are nished using the machine, press and hold the power button for 1 second until the LEDs turn o. Then, remove the power cable. Manually push the gripper up from the orice side so that you may grip the small end on the other side. Twist the small end to the unlock position, and remove the stroker from the machine. STEP 7 : CARING FOR YOUR MACHINE & SLEEVE Remove the sleeve from the case. Squirt soap into the sleeve and wash thoroughly. You may also wash the plastic stroker casing with soap and warm water. After washing, spray a sex toy cleaner into the sleeve, let it sit for 1 minute, and then rinse it again. You may dab your sleeve dry with a towel, inside and out. Autoblow rubber sleeves may be turned inside out for cleaning but SILICONE SLEEVES CANNOT BE TURNED INSIDE OUT. SLEEVE & CASE CLEANING Prior to use, you may adjust the suction control by turning the end-cap on the stroker case. SUCTION CONTROL ACCESSING INTERNET-CONNECTED FEATURES You can connect your Autoblow AI Ultra to the internet to access a suite of online features. Please visit Autoblowme.com for internet connection instructions and tutorial videos. You may scan the QR code below for easy access: WARNING IF YOU TIGHTEN THE CAP TOO MUCH, THE MACHINE WILL NOT OPERATE PROPERLY AND MAY STALL. NEVER submerge the Autoblow AI Ultra electrical appliance in water. Use a damp cloth to clean its exterior surfaces only. Store the machine in a cool dry place out of direct sunlight. To extend the life of Autoblow sleeves and to maintain their silky textures, dust sleeves with corn starch after cleaning and store sleeves in sealed plastic bags. STEP 8 : MAINTENANCE & STORAGE WARNINGS THIS IS AN ELECTRICAL APPLIANCE. DO NOT USE IN OR NEAR WATER. INJURY OR DEATH MAY RESULT. THIS DEVICE MUST BE USED IN CONJUNCTION WITH AN AUTOBLOW BRAND SLEEVE. DO NOT USE THE AUTOBLOW WITHOUT A SLEEVE INSTALLED OR INJURY MAY RESULT. DO NOT USE THE PRODUCT WITH A NONAUTOBLOW BRAND SLEEVE OR INJURY MAY RESULT. IF AT ANY TIME YOU EXPERIENCE PAIN OR DISCOMFORT, IMMEDIATELY CEASE USE. WARRANTY Autoblow warrants that the electrical parts and motor of the Autoblow AI Ultra are covered for a period of one (1) year. The warranty is from the date of original purchase, against defects due to faulty workmanship or materials. The warranty covers the main body of the Autoblow product only, provided it has not been tampered with, or taken apart. The warranty does not cover the reusable sleeve. The warranty does not cover cosmetic deterioration caused by normal wear and tear. The warranty also does not cover damage caused by accident, misuse, or neglect. Any attempt to open or take apart the Autoblow will void the warranty. Very Intelligent Ecommerce 2023 All Rights Reserved. Autoblow is a registered trademark of Very Intelligent Ecommerce, Inc. Autoblow AI Ultra is a novelty only and has no therapeutic or medical application. Contact us at [email protected]. LEGAL EN INSTRUCTION MANUAL EN • DE • DK • ES • FR • IT • NL • RU • SE DE DEDK DK DE DKESESES Stecken Sie das Stromkabel an der Oberseite des Autoblow AI Ultra an und stecken Sie den Stecker in eine Steckdose (120 V–240 V). Das Gerät muss während der Nutzung an der Steckdose angeschlossen bleiben, da es keine Batterien hat. SCHRITT 1  ANSCHLIEßEN SCHRITT 2  EINSCHALTEN Halten Sie den An-/Aus-Taste kurz gedrückt, bis die LEDs aueuchten. SCHRITT 3  SETZEN SIE DEN STREICHLER EIN Führen Sie eine Hülse in das Gehäuse ein. Halten Sie nun die Maschine auf den Kopf und lassen Sie das Gehäuse mit dem kleinen Ende nach unte…

Text truncated - open the document above for the full version.

VERY INTELLIGENT ECOMMERCE INC. 2023-09-09 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for (FCC ID: 2A4AW- AUTOBLOWULTRA ) [VERY INTELLIGENT ECOMMERCE INC.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Brian Sloan Manager VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States VERY INTELLIGENT ECOMMERCE INC. 2023-09-09 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for(FCC ID: 2A4AW- AUTOBLOWULTRA ) [VERY INTELLIGENT ECOMMERCE INC. ] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Brian Sloan Manager VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States

Attestation Statements (2023-9-9) TO: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046, USA RE: Attestation Statements Part 2.911(d)(7) request for (FCC ID: 2A4AW- AUTOBLOWULTRA) (VERY INTELLIGENT ECOMMERCE INC.), the undersigned, hereby authorize (VERY INTELLIGENT ECOMMERCE INC.) to act as our designated U.S. agent for service of process,( VERY INTELLIGENT ECOMMERCE INC.) accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. (VERY INTELLIGENT ECOMMERCE INC.) accepts the responsibility to act as designated U.S. agent for service of process. Applicant Information˖ Company name: VERY INTELLIGENT ECOMMERCE INC. Contact Name: Brian Sloan Address: 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States Telephone No: 1-888-826-5726 Email: [email protected] Signature [Brian Sloan] U.S. Agent Information: Company Name: VERY INTELLIGENT ECOMMERCE INC. Address: 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States FRN: 0031855828 Contact Name: Brian Sloan Telephone No: 1-888-826-5726 Email: [email protected] Signature [Brian Sloan]

Discrepancy declaration（差异声明） Our company states that the main model of our products is Autoblow AI ULTRA, and the rest are series models. The series model is consistent with the main model in appearance, circuit design, circuit layout, use of components and internal structure, the difference is mainly due to the inconsistent model name. As follows, Main model Series model Autoblow AI ULTRA Autoblow AI ULTRA Clear, CG668 2023-0 8-31 Sincerely, Signature: Contact name:Brian Sloan Contact company:VERYINTELLIGENT ECOMMERCE INC. Address:109 E, 17th St, Suite 4,Cheyenne, WY 82001, United States.

VERY INTELLIGENT ECOMMERCE INC. 2023-09-09 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Guangdong Global Testing Technology Co., Ltd. to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Brian Sloan Manager VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States

VERY INTELLIGENT ECOMMERCE INC. 2023-09-09 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: CONFIDENTIALITY REQUEST FOR (EUT Name: Motorized Penis Stroking Machine With Detachable Stroker /Model: Autoblow AI ULTRA, Autoblow AI ULTRA Clear, CG668 /FCC ID: 2A4AW-AUTOBLOWULTRA) To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (Block Diagram ,Operational Description,Schematics ) required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Brian Sloan Manager VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States

External-1 Adapter(BI36L-120300-I) External-2 Adapter(GQ36-120300-AX) External-3 External-4 External-5 External-6 External-7 External-8 External-9 Adapter(BI36L-120300-I) External-10 Adapter(GQ36-120300-AX) External-11 External-12 External-13 External-14 External-15 External-16 External-17 Adapter(BI36L-120300-I) External-18 Adapter(GQ36-120300-AX)

Internal-1 Internal-2 Internal-3 Internal-4 Internal-5 Internal-6 Internal-7 Motor(CK-RK-555PH-3747-85DV) Internal-8 Motor(R555-3748) Internal-9 Antenna RF IC

RF EXPOSURE EVALUATION EUT Specification EUT Motorized Penis Stroking Machine With Detachable Stroker Model Number Autoblow AI ULTRA Series Model Autoblow AI ULTRA Clear,CG668 FCC ID 2A4AW-AUTOBLOWULTRA Antenna gain (Max) 3.71dBi Operation Frequency 2412-2462MHz Input Rating AC 120V/60Hz Classification Per Stipulated Test Standard §1 5.247(i), §2.1093 Modulation IEEE 802.11b: DSSS(CCK, DQPSK, DBPSK) IEEE 802.11g/n: OFDM(64-QAM, 16-QAM, QPSK, BPSK) Max. output power IEEE 802.11b: 1.47 dBm IEEE 802.11g: 0.91 dBm IEEE 802.11n-HT20: 0.98 dBm IEEE 802.11n-HT40: 1.33 dBm Test Requirement: According to ß15.247(i) and ß1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. Routine SAR evaluation refers to that specifically required by ß2.1093, using measurements or computer simulation. When routine SAR evaluation is not required, portable transmitters with output power greater than the applicable low threshold require SAR evaluation to quality for TCB approval. One antenna is available for the EUT. The minimum separation distance is 5mm. According to KDB 447498, no stand-alone required for BT antenna, and no simultaneous SAR measurement is required. Signature: Shawn Wen Date: 2023-09-02 Transmit Frequency (MHz) Mode Measured Power (dBm) Tune up Power (dBm) Max tune up power(dBm) Calculation Result 1-g SAR 2412 802.11b 1.47 2±1 3 0.62 3

OTA TEST REPORT Applicant Espressif Systems Product ESP-ANT A Model ESP-ANT A Report No. YXA1711-1424OTA01R3 Issue Date November 27, 2020 TA Technology (Shanghai) Co., Ltd. tested the above equipment in accordance with the requirements in ANSI/IEEE Std 149-2008. The test results show that the equipment tested is capable of demonstrating compliance with the requirements as documented in this report. Prepared b y: Peng Tao Approved by: Kai Xu TA Technology (Shanghai) Co., Ltd. No.145, Jintang Rd, Tangzhen Industry Park, Pudong Shanghai, China TEL: +86‐021‐50791141/2/3 FAX: +86‐021‐50791141/2/3‐8000 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 2 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. TABLE OF CONTENTS 1. General Information ....................................................................................................................... 3 1.1. Notes of the Test Report ................................................................................................... 3 1.2. Testing laboratory .............................................................................................................. 3 1.3. Laboratory Environment .................................................................................................... 3 2. General Description of Equipment under Test ............................................................................... 4 2.1. Applicant Information ......................................................................................................... 4 2.2. Manufacturer Information .................................................................................................. 4 2.3. Information of EUT ............................................................................................................ 4 2.4. Test Date ........................................................................................................................... 4 2.5. Applied Standards ............................................................................................................. 5 3. Test Conditions .............................................................................................................................. 6 3.1. Test Configuration ............................................................................................................. 6 3.2. Test Measurement ............................................................................................................. 6 4. Test Results ................................................................................................................................... 7 4.1. Gain and Efficiency ............................................................................................................ 7 4.2. Voltage Standing Wave Ratio (VSWR) .............................................................................. 8 4.3. Antenna S11 ...................................................................................................................... 8 5. Test Equipment List ....................................................................................................................... 9 APPENDIX A: 2-D Pattern Plots ............................................................................................................. 10 APPENDIX B: The EUT Appearance and Test Configuration .................................................................. 11 B.1 EUT Appearance ................................................................................................................... 11 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 3 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 1. General Information 1.1. Notes of the Test Report This report shall not be reproduced in full or partial, without the written approval of TA technology (shanghai) co., Ltd.The results documented in this report apply only to the tested sample, under the conditions and modes of operation as described herein .Measurement Uncertainties were not taken into account and are published for informational purposes only. This report is written to support regulatory compliance of the applicable standards stated above. This report must not be used by the client to claim product certification, approval, or endorsement by any government agencies. 1.2. Testing laboratory Company: TA Technology (Shanghai) Co., Ltd. Address: No.145, Jintang Rd, Tangzhen Industry Park, Pudong City: Shanghai Post code: 201201 Country: P. R. China Contact: Xu Kai Telephone: +86-021-50791141/2/3 Fax: +86-021-50791141/2/3-8000 Website: http://www.ta-shanghai.com E-mail: [email protected] 1.3. Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect 0.7-6GHz > 100dB Ground resistance <0.5 OTA Test Report Report No: YXA1711-1424OTA01R3 TA Technology (Shanghai) Co., Ltd. TA-MB-04-008O P age 4 of 11 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. 2. General Description of Equipment under Test 2.1. Applicant Information Company: Espressif Systems Address: #204, Block 2, 690 Bibo Road, Zhang Jiang High-Tech Park, Shanghai, P. R. China 2.2. Manufacturer Information Company: Espressif Systems Address: #204, Block 2, 690 Bibo Road, Zhang Jiang High-Tech Park, Shanghai, P. R. China 2.3. Information of EUT General information EUT Description Product Name: ESP-ANT A Model ESP-ANT A HW Version: / SW Version: / Antenna Type: Fixed Antenna (PCB Antenna) Antenna Manufacturer: Espressif Systems Test Frequency: 2400MHz ~ 2500MHz Test lab. of the antenna gain and radiation pattern measurement: TA Technology (Shanghai) Co., Ltd. This revised report (R…

Text truncated - open the document above for the full version.

TRF No.: 04-E001-1A TRF Originator: GTG TRF Date: 2022-06-29 Web: www.gtggroup.com E-mail: [email protected] Tel.: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C TEST REPORT For Motorized Penis Stroking Machine With Detachable Stroker MODEL NUMBER: Autoblow AI ULTRA,Autoblow AI ULTRA Clear,CG668 REPORT NUMBER: E04A23080403F01401 ISSUE DATE: September 2, 2023 FCC ID:2A4AW-AUTOBLOWULTRA Trademark: Prepared for VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A23080403F01401 Page 2 of 45 TRF No.: 04-E001-1A Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 September 2, 2023 Initial Issue Jok Yang REPORT NO.: E04A23080403F01401 Page 3 of 45 TRF No.: 04-E001-1A Global Testing , Great Quality. Summary of Test Results Test Item Clause Limit/Requirement Result Antenna Requirement N/A FCC Part 15.203/15.247 (c) Pass AC Power Line Conducted Emission ANSI C63.10-2013, Clause 6.2 FCC Part 15.207 Pass Conducted Output Power ANSI C63.10-2013, Clause 11.9.1.3 FCC Part 15.247 (b)(3) Pass 6dB Bandwidth ANSI C63.10-2013, Clause 11.8.1 FCC Part 15.247 (a)(2) Pass Power Spectral Density ANSI C63.10-2013, Clause 11.10.2 FCC Part 15.247 (e) Pass Conducted Band edge and spurious emission ANSI C63.10-2013, Clause 11.11 FCC Part 15.247(d) Pass Radiated Band edge and Spurious Emission ANSI C63.10-2013, Clause 11.11 & Clause 11.12 FCC Part 15.205/15.209 Pass Duty Cycle ANSI C63.10-2013, Clause 11.6 None; for reporting purposes only. Pass *This test report is only published to and used by the applicant, and it is not for evidence purpose in China. *The measurement result for the sample received is <Pass> according to <CFR 47 FCC PART 15 SUBPART C> when <Accuracy Method> decision rule is applied. REPORT NO.: E04A23080403F01401 Page 4 of 45 TRF No.: 04-E001-1A Global Testing , Great Quality. CONTENTS 1. ATTESTATION OF TEST RESULTS ........................................................................................ 5 2. TEST METHODOLOGY ............................................................................................................ 6 3. FACILITIES AND ACCREDITATION ........................................................................................ 6 4. CALIBRATION AND UNCERTAINTY....................................................................................... 7 4.1. MEASURING INSTRUMENT CALIBRATION ..................................................................... 7 4.2. MEASUREMENT UNCERTAINTY ...................................................................................... 7 5. EQUIPMENT UNDER TEST ..................................................................................................... 8 5.1. DESCRIPTION OF EUT ..................................................................................................... 8 5.2. CHANNEL LIST .................................................................................................................. 8 5.3. Maximum Conducted Peak Output Power .......................................................................... 9 5.4. TEST CHANNEL CONFIGURATION .................................................................................. 9 5.5. THE WORSE CASE POWER SETTING PARAMETER ...................................................... 9 5.6. DESCRIPTION OF AVAILABLE ANTENNAS ................................................................... 10 5.7. SUPPORT UNITS FOR SYSTEM TEST ........................................................................... 10 5.8. SETUP DIAGRAM ............................................................................................................ 11 6. MEASURING EQUIPMENT AND SOFTWARE USED ............................................................ 12 7. ANTENNA PORT TEST RESULTS ........................................................................................ 14 7.1. Conducted Output Power .................................................................................................. 14 7.2. 6dB Bandwidth ................................................................................................................. 15 7.3. Power Spectral Density..................................................................................................... 17 7.4. Conducted Band edge and spurious emission .................................................................. 19 7.5. Duty Cycle ........................................................................................................................ 21 8. RADIATED TEST RESULTS .................................................................................................. 22 9. ANTENNA REQUIREMENT ................................................................................................... 39 10. AC POWER LINE CONDUCTED EMISSION ........................................................................ 40 APPENDIX: PHOTOGRAPHS OF TEST CONFIGURATION ..................................................... 43 APPENDIX: PHOTOGRAPHS OF THE EUT .............................................................................. 44 REPORT NO.: E04A23080403F01401 Page 5 of 45 TRF No.: 04-E001-1A Global Testing , Great Quality. 1. ATTESTATION OF TEST RESULTS Applicant Information Company Name: VERY INTELLIGENT ECOMMERCE INC. Address: 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States Manufacturer Information Company Name: VERY INTELLIGENT ECOMMERCE INC. Address: 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States Factory Information Company Name: VERY INTELLIGENT ECOMMERCE INC. Address: 109 E, 17th St, Suite 4, Cheyenne,…

Text truncated - open the document above for the full version.

TRF No.: 04-E001-1A TRF Originator: GTG TRF Date: 2022-06-29 Web: www.gtggroup.com E-mail: [email protected].: 86-400 755 8988 CFR 47 FCC PART 15 SUBPART C TEST REPORT For Motorized Penis Stroking Machine With Detachable Stroker MODEL NUMBER: Autoblow AI ULTRA,Autoblow AI ULTRA Clear,CG668 REPORT NUMBER: E04A23080403F01402 ISSUE DATE: September 2, 2023 FCC ID:2A4AW-AUTOBLOWULTRA Trademark: Prepared for VERY INTELLIGENT ECOMMERCE INC. 109 E, 17th St, Suite 4, Cheyenne, WY 82001, United States Prepared by Guangdong Global Testing Technology Co., Ltd. Room 101-105, 203-210, Building 1, No.2, Keji 8 Road, Songshan Lake Park, Dongguan city, Guangdong, People’s Republic of China, 523808 This report shall not be reproduced, except in full, without the written approval of Guangdong Global Testing Technology Co., Ltd. REPORT NO.: E04A23080403F01402 Page 2 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Revision History Rev. Issue Date Revisions Revised By V0 September 2, 2023 Initial Issue Jok Yang REPORT NO.: E04A23080403F01402 Page 3 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Appendix A Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT b 2412 Ant1 100 0 0 NVNT b 2437 Ant1 100 0 0 NVNT b 2462 Ant1 100 0 0 NVNT g 2412 Ant1 100 0 0 NVNT g 2437 Ant1 100 0 0 NVNT g 2462 Ant1 100 0 0 NVNT n20 2412 Ant1 100 0 0 NVNT n20 2437 Ant1 100 0 0 NVNT n20 2462 Ant1 100 0 0 NVNT n40 2422 Ant1 100 0 0 NVNT n40 2437 Ant1 100 0 0 NVNT n40 2452 Ant1 100 0 0 REPORT NO.: E04A23080403F01402 Page 4 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Test Graphs Duty Cycle NVNT b 2412MHz Ant1 Duty Cycle NVNT b 2437MHz Ant1 REPORT NO.: E04A23080403F01402 Page 5 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Duty Cycle NVNT b 2462MHz Ant1 Duty Cycle NVNT g 2412MHz Ant1 REPORT NO.: E04A23080403F01402 Page 6 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Duty Cycle NVNT g 2437MHz Ant1 Duty Cycle NVNT g 2462MHz Ant1 REPORT NO.: E04A23080403F01402 Page 7 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Duty Cycle NVNT n20 2412MHz Ant1 Duty Cycle NVNT n20 2437MHz Ant1 REPORT NO.: E04A23080403F01402 Page 8 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Duty Cycle NVNT n20 2462MHz Ant1 Duty Cycle NVNT n40 2422MHz Ant1 REPORT NO.: E04A23080403F01402 Page 9 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Duty Cycle NVNT n40 2437MHz Ant1 Duty Cycle NVNT n40 2452MHz Ant1 REPORT NO.: E04A23080403F01402 Page 10 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Appendix B Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT b 2412 Ant1 1.47 30 Pass NVNT b 2437 Ant1 1.24 30 Pass NVNT b 2462 Ant1 1.44 30 Pass NVNT g 2412 Ant1 0.41 30 Pass NVNT g 2437 Ant1 0.91 30 Pass NVNT g 2462 Ant1 0.25 30 Pass NVNT n20 2412 Ant1 0.98 30 Pass NVNT n20 2437 Ant1 0.54 30 Pass NVNT n20 2462 Ant1 0.37 30 Pass NVNT n40 2422 Ant1 0.77 30 Pass NVNT n40 2437 Ant1 1.33 30 Pass NVNT n40 2452 Ant1 0.81 30 Pass REPORT NO.: E04A23080403F01402 Page 11 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Appendix C -6dB Bandwidth Condition Mode Frequency (MHz) Antenna -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict NVNT b 2412 Ant1 9.102 0.5 Pass NVNT b 2437 Ant1 9.549 0.5 Pass NVNT b 2462 Ant1 9.552 0.5 Pass NVNT g 2412 Ant1 16.416 0.5 Pass NVNT g 2437 Ant1 16.404 0.5 Pass NVNT g 2462 Ant1 16.398 0.5 Pass NVNT n20 2412 Ant1 17.253 0.5 Pass NVNT n20 2437 Ant1 17.034 0.5 Pass NVNT n20 2462 Ant1 17.292 0.5 Pass NVNT n40 2422 Ant1 33.15 0.5 Pass NVNT n40 2437 Ant1 33.15 0.5 Pass NVNT n40 2452 Ant1 33.294 0.5 Pass REPORT NO.: E04A23080403F01402 Page 12 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Test Graphs -6dB Bandwidth NVNT b 2412MHz Ant1 -6dB Bandwidth NVNT b 2437MHz Ant1 REPORT NO.: E04A23080403F01402 Page 13 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. -6dB Bandwidth NVNT b 2462MHz Ant1 -6dB Bandwidth NVNT g 2412MHz Ant1 REPORT NO.: E04A23080403F01402 Page 14 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. -6dB Bandwidth NVNT g 2437MHz Ant1 -6dB Bandwidth NVNT g 2462MHz Ant1 REPORT NO.: E04A23080403F01402 Page 15 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. -6dB Bandwidth NVNT n20 2412MHz Ant1 -6dB Bandwidth NVNT n20 2437MHz Ant1 REPORT NO.: E04A23080403F01402 Page 16 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. -6dB Bandwidth NVNT n20 2462MHz Ant1 -6dB Bandwidth NVNT n40 2422MHz Ant1 REPORT NO.: E04A23080403F01402 Page 17 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. -6dB Bandwidth NVNT n40 2437MHz Ant1 -6dB Bandwidth NVNT n40 2452MHz Ant1 REPORT NO.: E04A23080403F01402 Page 18 of 47 TRF No.: 04-E001-1A Global Testing , Great Quality. Appendix D Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Conducted PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT b 2412 Ant1 -22.58 8 Pass NVNT b 2437 Ant1 -21.92 8 Pass NVNT b 2462 Ant1 -21.58 8 Pass NVNT g 2412 Ant1 -21.56 …

Text truncated - open the document above for the full version.