2A58W-MP10Clip-on Earphone

Dongguan Heng Da Rui Electronic Technology Co., Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Attestation Statements Not Covered Entity Applicant & Not Covered Equipment To: Federal Communications Commission Date: Apr. 15, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Ref: Information Required by Section 2.911(d)(5)(i) & (ii) FCC ID: 2A58W-MP10 Dongguan Heng Da Rui Electronic Technology Co., Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List, established pursuant to § 1.50002 of reference chapter, as an entity producing “covered” communication equipment. The equipment for which authorization is sought is not “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List that prohibited from receiving an equipment authorization pursuant to section § 2.903 of the FCC rules. Sincerely yours, Applicant Signature Printed Name: Ping Luo Title: Manager Address: Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Tel.: 13670287893 Email: [email protected]

Dongguan Heng Da Rui Electronic Technology Co., Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China 1 | P a g e Attestation Statements To: Federal Communications Commission Date: Apr. 15, 26 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Attestation of Compliance with FCC Covered List Software Requirements FCC ID: 2A58W-MP10 Product Name: Clip-on Earphone This letter serves as an attestation that the equipment identified above ☐ is / ☒ is not (select one) "covered" software as defined under the Federal Communications Commission (FCC) Covered List requirements, as outlined in FCC 22-84 and KDB 986446. Specifically, the undersigned certifies that the equipment for which authorization is sought: 1. Does not contain cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors, assignees, parents, subsidiaries, affiliates, or any entity that has rebranded or relabeled software produced by the aforementioned entities. 2. Does not have the capability to store, run, or deliver any software identified on the FCC Covered List, including but not limited to cybersecurity and anti-virus software. To support this attestation, the appendix evaluation documentation has been prepared and is included in the certification filing. This attestation is based on a thorough evaluation of the device's design, functionality, and software environment. The undersigned affirms that the information provided is accurate and complete to the best of their knowledge. Sincerely yours, Applicant Signature Printed Name: Ping Luo Title: 13670287893 Address: Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Tel.: 13670287893 Email: [email protected] Dongguan Heng Da Rui Electronic Technology Co., Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China 2 | P a g e Evaluation regarding to the Covered List Software: Compliance Methodology Evaluation Process Results Device is Inherent compliance ☒ The Chipset(s) used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ The Memory used is limited to run the Cybersecurity or anti-virus software. Compliance ☒ There is storage capacity limitation for store or install the Cybersecurity or anti-virus software. Compliance ☒ Operating system used is limited to run, install or deliver the Cybersecurity or anti-virus software. Compliance Device is not Inherent compliance ☐ Evaluation Based on Software Bill of Materials (SBoM) ☐ Evaluation Based on Scan for Software on the device ☐ Evaluation Based on Filesystem scan ☐ Evaluation Based on Running software check

Dongguan Heng Da Rui Electronic Technology Co., Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: Apr. 15, 26 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A58W-MP10 [Dongguan Heng Da Rui Electronic Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, [AOGES CO., LIMITED] (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. [AOGES CO., LIMITED] ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: AOGES CO., LIMITED FRN: 0033947847 Address: 1624 Market St, Ste 226, #30327 Denver CO, 80202 US Signature: Contact Person: XIAOYAN LAl Tel: 303 623 1940 Email: [email protected] Applicant Company Name: Dongguan Heng Da Rui Electronic Technology Co., Ltd. FRN: 0037785706 Address: Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Signature: Contact Person: Ping Luo Tel: 13670287893 Email: [email protected]

Differences Description We Dongguan Heng Da Rui Electronic Technology Co.,Ltd. state: Product： Clip-on Earphone Model Name： MISHUAI MS-MP10, MISHUAI MS-MP10 Pro, MISHUAI MS-MP12, MISHUAI MS-MP12 Pro, MISHUAI MS-MP17, MISHUAI MS-MP17 Pro Trade Name: MISHUAI The electrical circuit design, layout, components used and internal wiring for above models are identical, Only different in model name and appearance Colors. Signatory Sincerely yours, Applicant Signature Printed Name: Ping Luo Title: Manager Address: Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Tel.: 13670287893 Email: [email protected]

Dongguan Heng Da Rui Electronic Technology Co., Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Apr. 15, 26 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Confidentiality Request for: FCC ID: 2A58W-MP10 Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request permanent confidential treatment of the exhibits accompanying this certification application as outlined below :  Block Diagram  Schematics  Operational Description The above exhibits contain trade secrets and/or proprietary information that are not publicly available and materials that the Applicant has spent considerable efforts in developing. Public disclosure of these may be harmful to the Applicant and give an unfair advantage to competitors on the market. Pursuant to DA 04-1705, the applicant also requests temporary confidential treatment of the exhibits outlined below for a period of ( / ) days from the date of equipment authorization and prior to marketing in the United States to prevent the premature release of any sensitive information. Applicant is aware of their responsibility to notify DERYCOM in the event information regarding the product or the product is made available to the public before the requested period has expired. Sincerely, Printed Name: Ping Luo Title: Manager Address: Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Tel.: Manager Email: [email protected]

Dongguan Heng Da Rui Electronic Technology Co., Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Apr. 15, 26 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 Subject: Agent Authorization for FCC ID: 2A58W-MP10 I, the undersigned, hereby authorize (SHENZHEN STS TEST SERVICES CO.,LTD.) to act on our behalf in all matters relating to this application for equipment certification. Any act carried out by (SHENZHEN STS TEST SERVICES CO.,LTD.) shall have the same effect as our own and I acknowledge that all responsibility for complying with the terms and conditions of certification, as specified by DERYCOM CERTIFICATION SERVICES, INC., still resides with (Dongguan Heng Da Rui Electronic Technology Co., Ltd.). We certify that we are not subject to a denial of federal benefits that includes FCC benefits pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862, and that no party to the application, as defined in 47 CFR §1.2002(b), is subject to a denial of federal benefits that includes FCC benefits pursuant to that section. Sincerely, Printed Name: Ping Luo Title: Manager Address: Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Tel.: 13670287893 Email: [email protected]

Page 1 of 6 ReportNo.:STS2601184 APPENDIX-PHOTOGRAPHSOFEUTCONSTRUCTIONALDETAILS Photo1 Photo2 Page 2 of 6 ReportNo.:STS2601184 Photo3 Photo4 Page 3 of 6 ReportNo.:STS2601184 Photo5 Photo6 Page 4 of 6 ReportNo.:STS2601184 Photo7 Photo8 Page 5 of 6 ReportNo.:STS2601184 Photo9 Photo10 Page 6 of 6 ReportNo.:STS2601184 Photo11 Photo12

FCC ID Label Location The product does not have enough space to place the label, and FCC ID label is reflected in the user manual and package, as below: User Manual: Package:

Page 1 of 5 ReportNo.:STS2601184 APPENDIX-PHOTOGRAPHSOFEUTCONSTRUCTIONALDETAILS Photo1 Photo2 BTAntenna Page 2 of 5 ReportNo.:STS2601184 Photo3 Photo4 BTAntenna Page 3 of 5 ReportNo.:STS2601184 Photo5 Photo6 Page 4 of 5 ReportNo.:STS2601184 Photo7 Photo8 Page 5 of 5 ReportNo.:STS2601184 Photo9

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. MPE Report Report No.:STS2601184H02 Issued for Dongguan Heng Da Rui Electronic Technology Co.,Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Product Name: Clip-on Earphone Brand Name: MISHUAI Model Name: MISHUAI MS-MP10 Series Model(s): MISHUAI MS-MP10 Pro, MISHUAI MS-MP12, MISHUAI MS-MP12 Pro, MISHUAI MS-MP17, MISHUAI MS-MP17 Pro FCC ID: 2A58W-MP10 Test Standards: FCC 47CFR §2.1093 Page 2 of 9 Report No.: STS2601184H02 TEST REPORT Applicant’s Name ................. : Dongguan Heng Da Rui Electronic Technology Co.,Ltd. Address .................................. : Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Manufacturer's Name .......... : Dongguan Heng Da Rui Electronic Technology Co.,Ltd. Address .................................. : Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Product Description Product Name ........................ : Clip-on Earphone Brand Name ........................... : MISHUAI Model Name........................... : MISHUAI MS-MP10 Series Model(s) ...................... : MISHUAI MS-MP10 Pro, MISHUAI MS-MP12, MISHUAI MS-MP12 Pro, MISHUAI MS-MP17, MISHUAI MS-MP17 Pro Test Standards ..................... : FCC 47CFR §2.1093 447498 D04 Interim General RF Exposure Guidance v01 The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the ShenZhen STS Test Services Co., Ltd. Date of Test ............................................ : Date of receipt of test item ...................... : 16 Jan. 2026 Date (s) of performance of tests.............. : 16 Jan. 2026 ~ 24 Mar 2026 Date of Issue ........................................... : 24 Mar 2026 Test Result ............................................... : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 9 Report No.: STS2601184H02 TABLE OF CONTENTS 1. GENERAL INFORMATION 5 1.1 GENERAL DESCRIPTION OF THE EUT 5 1.2 TEST FACTORY 5 2. FCC 47CFR §2.1093 REQUIREMENT 6 2.1 TEST STANDARDS 6 2.2 LIMIT 6 2.3 TEST RESULT 9 Page 4 of 9 Report No.: STS2601184H02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 24 Mar 2026 STS2601184H02 ALL Initial Issue Page 5 of 9 Report No.: STS2601184H02 1. GENERAL INFORMATION 1.1 GENERAL DESCRIPTION OF THE EUT Product Name Clip-on Earphone Brand Name MISHUAI Model Name MISHUAI MS-MP10 Series Model(s) MISHUAI MS-MP10 Pro, MISHUAI MS-MP12, MISHUAI MS-MP12 Pro, MISHUAI MS-MP17, MISHUAI MS-MP17 Pro Model Difference Only different in model name and appearance Colors. Product Description The EUT is Clip-on Earphone Operation Frequency: 2402~2480 MHz Modulation Type: BT BR(1Mbps): GFSK BT EDR(2Mbps): π/4-DQPSK BT EDR(3Mbps): 8DPSK Antenna gain: L: -0.21dBi R: -2.09dBi Antenna Designation: FPC Power Rating Input: DC5V 0.8A Adapter N/A Battery EAR Model:501015 Brand: N/A Rated Voltage: 3.7V Charge Limit Voltage: 4.2V Capacity: 50mAh Charging box: Model:901640 Brand: N/A Rated Voltage: 3.7V Charge Limit Voltage: 4.2V Capacity: 520 mAh Hardware Version V1 Software Version V08 1.2 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 Page 6 of 9 Report No.: STS2601184H02 2. FCC 47CFR §2.1093 REQUIREMENT 2.1 TEST STANDARDS Follow the maximum permissible exposure (MPE) limits specified in 447498 D04 Interim General Radio Frequency Exposure Guidelines v01. The gain of the antenna used in the product was extracted from the supplied antenna data sheet and the maximum total power input to the antenna was also measured. Calculate the distance from the product to the MPE limit by the formula. 2.2 LIMIT For single RF sources (i.e., any single fixed RF source, mobile device, or portable device, as defined in paragraph (b)(2) of this section): A single RF source is exempt if: (A) The available maximum time-averaged power is no more than 1 mW, regardless of separation distance. This exemption may not be used in conjunction with other exemption criteria other than those in paragraph (b)(3)(ii)(A) of Part 1.1307. Medical implant devices may only use this exemption and that in paragraph (b)(3)(ii)(A); (B) Or the available maximum time-averaged power or effective radiated power (ERP), whichever is greater, is less than or equal to the threshold Pth (mW) described in the following formula. This method shall only be used at separation distances (cm) from 0.5 centimeters to 40 centimeters and at frequencies from 0.3 GHz to 6 GHz (inclusive). Pth is given by: Page 7 of 9 Report No.: STS2601184H02 (C) Or using below table and the minimum separation distance (R in meters) from the body of a nearby person for the frequency (f in MHz) at which the source operates, the ERP (watts) is no more than the calculated value prescribed for that frequency. For the exemption in Table 1 to apply, R must be at least λ/2π, where λ is the free-space operating wavelength in meters. If the ERP of a single RF source is not easily obtained, then the available maximum time-averaged power may be used in lieu of ERP if the physical dimensions of the radiating structure(s) do not exceed the electrical length of λ/4 or if the antenna gain is less than that of a half-wave dipole (1.64 linear value). RF Source frequency (MHz) Threshold ERP(watts) 0.3-1.34 1,920 R 2 . 1.34-30 3,450 R 2 /f 2 . 30-300 3.83 R 2 . 300-1,50…

Text truncated - open the document above for the full version.

The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Radio Test Report Report No.:STS2601184W02 Issued for Dongguan Heng Da Rui Electronic Technology Co.,Ltd. Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Product Name: Clip-on Earphone Brand Name: MISHUAI Model Name: MISHUAI MS-MP10 Series Model(s): MISHUAI MS-MP10 Pro, MISHUAI MS-MP12, MISHUAI MS-MP12 Pro, MISHUAI MS-MP17, MISHUAI MS-MP17 Pro FCC ID: 2A58W-MP10 Test Standards: FCC Part15.247 Page 2 of 101 Report No.: STS2601184W02 TEST REPORT Applicant’s Name ................. : Dongguan Heng Da Rui Electronic Technology Co.,Ltd. Address .................................. : Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Manufacturer's Name ........... : Dongguan Heng Da Rui Electronic Technology Co.,Ltd. Address .................................. : Room 701, Unit 1, Building 2, No. 58, Humen Zhongxing Road, Humen Town, Dongguan City, Guangdong Province, China Product Description Product Name ........................ : Clip-on Earphone Brand Name ........................... : MISHUAI Model Name ........................... : MISHUAI MS-MP10 Series Model(s) .................... : MISHUAI MS-MP10 Pro, MISHUAI MS-MP12, MISHUAI MS-MP12 Pro, MISHUAI MS-MP17, MISHUAI MS-MP17 Pro Standards ............................. : FCC Part15.247 Test Procedure ....................... : ANSI C63.10-2020 This device described above has been tested by STS, the test results show that the equipment under test (EUT) is in compliance with the FCC requirements. And it is applicable only to the tested sample identified in the report. The test results presented in this report relate only to the object tested. This report shall not be reproduced, except in full, without the written approval of the Shenzhen STS Test Services Co., Ltd. Date of Test ............................... : Date of receipt of test item ......... : 16 Jan. 2026 Date (s) of performance of tests : 16 Jan. 2026 ~ 24 Mar 2026 Date of Issue ............................. : 24 Mar 2026 Test Result ................................. : Pass Testing Engineer : (Aaron Bu) Technical Manager : (Skylar Li) Authorized Signatory : (Bovey Yang) Page 3 of 101 Report No.: STS2601184W02 Table of Contents Page 1. SUMMARY OF TEST RESULTS 6 1.1 TEST FACTORY 7 1.2 MEASUREMENT UNCERTAINTY 7 2. GENERAL INFORMATION 8 2.2 DESCRIPTION OF THE TEST MODES 10 2.3 FREQUENCY HOPPING SYSTEM REQUIREMENTS 10 2.4 TABLE OF PARAMETERS OF TEST SOFTWARE SETTING 12 2.5 BLOCK DIAGRAM SHOWING THE CONFIGURATION OF SYSTEM TESTED 12 2.6 DESCRIPTION OF NECESSARY ACCESSORIES AND SUPPORT UNITS 13 2.7 EQUIPMENTS LIST 14 3. EMC EMISSION TEST 15 3.1 CONDUCTED EMISSION MEASUREMENT 15 3.2 RADIATED EMISSION MEASUREMENT 19 4. CONDUCTED SPURIOUS & BAND EDGE EMISSION 37 4.1 LIMIT 37 4.2 TEST PROCEDURE 37 4.3 TEST SETUP 37 4.4 EUT OPERATION CONDITIONS 38 4.5 TEST RESULTS 38 5. NUMBER OF HOPPING CHANNEL 39 5.1 LIMIT 39 5.2 TEST PROCEDURE 39 5.3 TEST SETUP 39 5.4 EUT OPERATION CONDITIONS 39 5.5 TEST RESULTS 39 6. AVERAGE TIME OF OCCUPANCY 40 6.1 LIMIT 40 6.2 TEST PROCEDURE 40 6.3 TEST SETUP 40 6.4 EUT OPERATION CONDITIONS 40 6.5 TEST RESULTS 40 7. HOPPING CHANNEL SEPARATION MEASUREMEN 41 7.1 LIMIT 41 Page 4 of 101 Report No.: STS2601184W02 Table of Contents Page 7.2 TEST PROCEDURE 41 7.3 TEST SETUP 41 7.4 EUT OPERATION CONDITIONS 41 7.5 TEST RESULTS 41 8. BANDWIDTH TEST 42 8.1 LIMIT 42 8.2 TEST PROCEDURE 42 8.3 TEST SETUP 42 8.4 EUT OPERATION CONDITIONS 42 8.5 TEST RESULTS 42 9. OUTPUT POWER TEST 43 9.1 LIMIT 43 9.2 TEST PROCEDURE 43 9.3 TEST SETUP 44 9.4 EUT OPERATION CONDITIONS 44 9.5 TEST RESULTS 44 10. ANTENNA REQUIREMENT 45 10.1 STANDARD REQUIREMENT 45 10.2 EUT ANTENNA 45 APPENDIX 1-TEST DATA 46 DWELL TIME 46 MAXIMUM PEAK CONDUCTED OUTPUT POWER 56 -20DB BANDWIDTH 62 CARRIER FREQUENCIES SEPARATION 68 NUMBER OF HOPPING CHANNEL 74 BAND EDGE 77 BAND EDGE(HOPPING) 84 CONDUCTED RF SPURIOUS EMISSION 91 APPENDIX 2-PHOTOS OF TEST SETUP 101 Page 5 of 101 Report No.: STS2601184W02 Revision History Rev. Issue Date Report No. Effect Page Contents 00 24 Mar 2026 STS2601184W02 ALL Initial Issue Page 6 of 101 Report No.: STS2601184W02 1. SUMMARY OF TEST RESULTS Test procedures according to the technical standards: KDB 558074 D01 15.247 Meas Guidance v05r02. FCC Part 15.247,Subpart C Standard Section Test Item Judgment Remark 15.207 Conducted Emission PASS -- 15.247(a)(1) Hopping Channel Separation PASS -- 15.247(a)(1)&(b)(1) Output Power PASS -- 15.209 Radiated Spurious Emission PASS -- 15.247(d) Conducted Spurious & Band Edge Emission PASS -- 15.247(a)(1)(iii) Number of Hopping Frequency PASS -- 15.247(a)(1)(iii) Dwell Time PASS -- 15.247(a)(1) Bandwidth PASS -- 15.205 Restricted bands of operation PASS -- Part 15.247(d)/part 15.209(a) Band Edge Emission PASS -- 15.203 Antenna Requirement PASS -- Note: (1) ‘N/A’ denotes test is not applicable in this Test Report. (2) All tests are according to ANSI C63.10-2020. Page 7 of 101 Report No.: STS2601184W02 1.1 TEST FACTORY SHENZHEN STS TEST SERVICES CO., LTD Add. : 101, Building B, Zhuoke Science Park, No.190 Chongqing Road, ZhanChengShequ, Fuhai Sub-District, Bao’an District, Shenzhen, Guang Dong, China FCC test Firm Registration Number: 625569 IC test Firm Registration Number: 12108A A2LA Certificate No.: 4338.01 1.2 MEASUREMENT UNCERTAINTY The reported uncertainty of measurement y ±U, where expended uncertainty U is based on a standard uncertainty multiplied by a coverage factor of k=2, providing a level of confidence of approximately 95 %. No. Item Uncertainty 1 RF output power, conducted ±0.751dB 2 Unwanted Emissions, conducted ±2.888dB 3 All emissions, radiated 9K-30MHz ±2.48dB 4 All emissions, radiated 30M-1GHz ±2.52dB 5 All emissions, radi…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2A58W-MP10 Setup photo AC Conduction RF Conduction Page 2 of 2 FCC ID: 2A58W-MP10 RE (Below 1GHz) RE (Above 1GHz)