2A598-TH15Wireless TV Headphones

Wireless TV Headphones User Manual TH15 - 2 - PRODUCT OVERVIEW Headphones Volume + Volume - Mute Equalizer Power Button & LED Indicator Charging Port PACKAGE CONTENTS - 1 - Headphones x 2 Transmitter USB-C Cable RCA Adapter Cable 3.5mm Audio Cable ❽ User Manual & Instruction Card ❼ OPTICAL Audio Cable Wall Charger (5V) ❻ CHARGE THE HEADPHONES POWER ON / OFF - 4 - 1. Plug the Type-C end of the USB cable into the charging port. 2. Plug the USB-A end of the USB cable into a USB wall charger (DC 5V/1A) or computer that is powered on. Notes: ● Fully charge the headphones before using them for the first time. ● The LED indicator stays red during charging. ● The LED indicator stays green when the headphones are fully charged. ● When the headphones power is low, it will voice prompt "Low battery" every 10 minutes until the headphones is automatically turned off Press and hold the Power button for 2 seconds. or DC 5V/1A - 3 - Transmitter DC 5VDATA IN Port AUX IN Port OPTICAL IN AntennaAntenna Power Indicator Power Button - 5 - Wireless TV headphones Operation mode There are 4 methods to connect the transmitter to TV. Please choose only one of the ways to connect the transmitter and TV. Not support to connect the transmitter and TV more than two ways at the same time. Method 1:�Connect the Transmitter to a TV with RCA Audio Convert Cable. Method 2:�Connect the Transmitter to a TV with OPTICAL Audio Cable. Method 3:�Connect the Transmitter to a TV with 3.5mm Audio Cable. Method 4:�Connect the Transmitter to a TV with USB-C Digital Cable. TV Back Power Source AUDIO OUT - 6 - ❶Plug the Type-C end of the USB digital cable into the DC 5V/DATA IN port on the transmitter, plug the USB-A end into the USB wall charger (included) and connect the charger to a power source. After connecting, the transmitter will turn on automatically with the red indicator is on all the time and no need to turn on the transmitter manually. The transmitter also can be turned on/off manually after powered. ❷Connect one end of the 3.5mm audio cable to the AUX IN port of the transmitter and the other end to RCA adapter cable. And then plug the RCA adapter cable into the RCA outputs port on your TV. ❸ The headphones will pair with the transmitter directly after turning on. After pairing with the transmitter successfully, the headphones' LED indicator stays white all the time while the transmitter's LED signal indicator on the transmitter stays white all the time. Note: If the transmitter turned on later than heaphones, the headphones will enter pairing mode, the headphones' LED indicator flashes white Connect the Transmitter to a TV with RCA Audio Convert Cable Method 1 - 7 - TV Back Power Source OPTICAL DIGITAL AUDIO OUT Connect the Transmitter to a TV with OPTICAL Audio Cable ❶Plug the Type-C end of the USB digital cable into the DC 5V/DATA IN port on the transmitter, plug the USB-A end into the USB wall charger (included) and connect the charger to a power source. After connecting, the transmitter will turn on automatically with the red indicator is on all the time and no need to turn on the transmitter manually. The transmitter also can be turned on/off manually after powered. ❷Please firstly to take out the protective cap in one end of OPTICAL audio cable and insert the head of OPTICAL cable into the OPTICAL IN port of the transmitter. Then take out the protective cap in other end of OPTICAL audio cable and put the other head of OPTICAL audio cable into the OPTICAL OUTPUT port on TV. ❸ The headphones will pair with the transmitter directly after turning on. After pairing with the transmitter successfully, the headphones' LED indicator stays white all the time while the transmitter's LED signal indicator on the transmitter stays white all the time. Note: If the transmitter turned on later than heaphones, the headphones will enter pairing mode, the headphones' LED indicator flashes white Method 2 - 8 - ❶Plug the Type-C end of the USB digital cable into the DC 5V/DATA IN port on the transmitter, plug the USB-A end into the USB wall charger (included) and connect the charger to a power source. After connecting, the transmitter will turn on automatically with the red indicator is on all the time and no need to turn on the transmitter manually. The transmitter also can be turned on/off manually after powered. ❷Connect one end of the 3.5mm audio cable to the AUX IN port of the transmitter and the other end to your TV's audio output port. Connect the Transmitter to a TV with 3.5mm Audio Cable TV Back AUDIO OUT Power Source Method 3 ❸ The headphones will pair with the transmitter directly after turning on. After pairing with the transmitter successfully, the headphones' LED indicator stays white all the time while the transmitter's LED signal indicator on the transmitter stays white all the time. Note: If the transmitter turned on later than heaphones, the headphones will enter pairing mode, the headphones' LED indicator flashes white ❶ For some new TV, the USB port has a digital audio signal output which can be connected to the transmitter by plug the type-C end of the Charging cable into the DC 5V/DATA IN port, and then plug the end of USB-A cable into the TV USB output port with digital audio signal. No need to connect the power adapter, 3.5mm audio cable, RCA audio adapter cable and OPTICAL Audio Cable. TV Back USB Connect the Transmitter to a TV with USB-C Digital Cable Note: Not all TVs can work with this connection method. If there is no sound out from the headphones after the connection is completed successfully, please try another connection method. - 9 - ❷The TV USB Port will output DC 5V after turning on the TV. The transmitter will turn on automatically after powering with the Power LED indicator stays red, no need to turn on the transmitter manually. The transmitter also can be turned on/off manually after powered the TV. While turning off the TV, The TV's USB port will not have the DC 5V output and the transmitter will b…

Text truncated - open the document above for the full version.

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process: Company Name: AOCE Corporation Inc. FRN: 0033401381 Contact Name: Johnson Wang Address: 6547 N Academy Bivd #2266 Springs, CO 80918, United States Telephone No: 13465825234 Email: [email protected] Applicant: Company name: HONGKONG ZHINYU TECHNOLOGY CO., LIMITED FRN: 0032222242 Product Description: Wireless TV Headphones Grantee code: 2A598 FCC ID: 2A598-TH15 Contact Name: Jun Wang Address: FLAT/RM A 12/F ZJ 300, 300 LOCKHART ROAD, WAN CHAI, HONG KONG Telephone No: 17722458903 Email: [email protected] [HONGKONG ZHINYU TECHNOLOGY CO., LIMITED] certifies that, as of the date of this filing of the application with the TCB, [AOCE Corporation Inc.] is our designated US agent for service of process for the above referenced FCC ID. [HONGKONG ZHINYU TECHNOLOGY CO., LIMITED] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [AOCE Corporation Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 04.02.2024 Applicant’s Name: Jun Wang US Agent’s Name: Johnson Wang Title: Manager Title: PM Signature Signature

C5266091_X24_Ed.2 1/1 “Attestation Statements” TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: HONGKONG ZHINYU TECHNOLOGY CO., LIMITED FRN: 0032222242 Grantee code: 2A598 FCC ID: 2A598-TH15 Contact Name: Jun Wang Address: FLAT/RM A 12/F ZJ 300, 300 LOCKHART ROAD, WAN CHAI, HONG KONG Telephone No: 17722458903 Fax No: Email: [email protected] i. [HONGKONG ZHINYU TECHNOLOGY CO., LIMITED] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii. [ HONGKONG ZHINYU TECHNOLOGY CO., LIMITED] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. HONGKONG ZHINYU TECHNOLOGY CO., LIMITED certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Date: 04.02.2024 Applicant’s Name: Jun Wang Title: Manager Signature 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

HONGKONG ZHINYU TECHNOLOGY CO., LIMITED Product Similarity Declaration Product name: Wireless TV Headphones Model name: TH15, TH15-A, TH15-B FCC ID: 2A598-TH15 We (HONGKONG ZHINYU TECHNOLOGY CO., LIMITED) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: Jun Wang Title: Manager Date: 04.02.2024

C5266091_X8_Ed.1 1/1 Letter of Authorization Company: HONGKONG ZHINYU TECHNOLOGY CO., LIMITED Address: FLAT/RM A 12/F ZJ 300, 300 LOCKHART ROAD, WAN CHAI, HONG KONG Product Name: Wireless TV Headphones Model Number: TH15, TH15-A, TH15-B FCC Identifier: 2A598-TH15 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jun Wang Date: 4/2/2024 Title: Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 HONGKONG ZHINYU TECHNOLOGY CO., LIMITED Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 4/2/2024 Subject: Request for Confidentiality FCC ID: 2A598-TH15 To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. Exhibits Long-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/Location No No Attestation Statement No No External Photos No ☐ Block Diagram ☒ ☐ Schematics ☒ ☐ Test Report No No Test Setup Photos No ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐ ☐ RF Exposure Info No No Operational Description ☒ ☐ Cover Letter(s) No No SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name: Jun Wang Title: Manager

Page 1 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (External Photos) Model: TH15 Page 2 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 3 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Page 4 of 4 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

Label Location

Page 1 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the EUT (Internal Photos) Model: TH15 Page 2 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] ANT Decorate ANT Page 3 of 3 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected]

Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] RF EXPOSURE Test Report Report No.: MTi230822006-07E2 Date of issue: 2024-03-27 Applicant: HONGKONG ZHINYU TECHNOLOGY CO., LIMITED Product: Wireless TV Headphones Model(s): TH15, TH15-A, TH15-B FCC ID: 2A598-TH15 Shenzhen Microtest Co., Ltd. http://www.mtitest.com - Page 2 of 5 - Report No.: MTi230822006-07E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. The report shall not be partially reproduced without the written consent of the laboratory; 2. The test results of this report are only responsible for the samples submitted; 3. This report is invalid without the seal and signature of the laboratory; 4. This report is invalid if transferred, altered or tampered with in any form without authorization; 5. Any objection to this report shall be submitted to the laboratory within 15 days from the date of receipt of the report. - Page 3 of 5 - Report No.: MTi230822006-07E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Result Certification Applicant: HONGKONG ZHINYU TECHNOLOGY CO., LIMITED Address: FLAT/RM A 12/F ZJ 300, 300 LOCKHART ROAD, WAN CHAI, HONG KONG Manufacturer: HONGKONG ZHINYU TECHNOLOGY CO., LIMITED Address: FLAT/RM A 12/F ZJ 300, 300 LOCKHART ROAD, WAN CHAI, HONG KONG Product description Product name: Wireless TV Headphones Trademark: ROSIDA, LETSACTIV, HSPRO Model name: TH15 Serial Model: TH15-A, TH15-B Standards: N/A Test procedure: KDB 447498 D01 v06 Date of Test Date of test: 2023-09-15 to 2024-03-27 Test result: Pass Test Engineer : (Letter Lan) Reviewed By: : (Leon Chen) Approved By: : (Tom Xue) - Page 4 of 5 - Report No.: MTi230822006-07E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] RF EXPOSURE EVALUATION According to FCC 1.1310: The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) Radiation as specified in §1.1307(b) Limits for Maximum Permissible Exposure (MPE) MPE Calculation Method Friis transmission formula: Pd= (Pout*G)\ (4*pi*R 2 ) Where Pd= Power density in mW/cm 2 Pout=output power to antenna in mW G= Numeric gain of the antenna relative to isotropic antenna Pi=3.1415926 R= distance between observation point and center of the radiator in cm(20cm) Pd the limit of MPE, 1mW/cm 2 . If we know the maximum gain of the antenna and total power input to the antenna, through the calculation, we will know the distance where the MPE limit is reached. - Page 5 of 5 - Report No.: MTi230822006-07E2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China. Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Measurement Result 2.4G SRD: Operation Frequency: 2402-2480MHz, Power density limited: 1mW/ cm 2 Antenna Type: Pole antenna; antenna gain: 2dBi R=20cm mW=10^(dBm/10) antenna gain Numeric=10^(dBi/10)= 10^(2/10)=1.58 BR+EDR: Channe l Freq. (MHz) modulation conducted power Tune- up power (dBm) Max Antenna Evaluation result Power density Limits (dBm) tune-up power Gain (mW/cm 2 ) (mW/c m 2 ) (dBm) (mW) (dBi) Numeric 2402 GFSK 1.7 1±1 2 1.585 2 1.58 0.0005 1 2441 0.79 1±1 2 1.585 2 1.58 0.0005 1 2480 0.18 1±1 2 1.585 2 1.58 0.0005 1 Conclusion: For the max result: 0.0005≤ 1.0, No SAR is required. ----END OF REPORT----

FED CUSTOMER: DESCRIPTION: PARTNO. ： CUSPARTNO.： DATE： 2.4G/5.8G2DBR1.13 Lmm=85 地址：深圳市龙岗区吉祥社区彩云路8号保成泰智汇产业园B栋202 Add: 202, Building B, Baocheng TaiZhihui Industrial Park, No.8 Caiyun Road, Jixiang Community, Longgang District, Shenzhen 产品承认书 张福里 微蓝无线 SSHENZHENFED 产品结构图 地址：深圳市龙岗区吉祥社区彩云路8号保成泰智汇产业园B栋202 Add: 202, Building B, Baocheng TaiZhihui Industrial Park, No.8 Caiyun Road, Jixiang Community, Longgang District, Shenzhen 85 + 5 地址：深圳市龙岗区吉祥社区彩云路8号保成泰智汇产业园B栋202 Add: 202, Building B, Baocheng TaiZhihui Industrial Park, No.8 Caiyun Road, Jixiang Community, Longgang District, Shenzhen FED 频率范围 2400-2500Mhz/5.6-5.8MhzFrequency Range 电压驻波比 ≤1 .5 VSWR ≤ 1.5 输入阻抗 50 ΩInput Impedance50 Ω 机 械 指 标 Mechanical Specifications 天线颜色 黑色 Antenna ColorBlack 线长度（露出） 85mmCable length85mm 工作温度 -40°C ~+ 85°C Working Temperature -40°C~ + 85°C 工 作湿度 20~ 80%Working Humidity20~ 80% 地址：深圳市龙岗区吉祥社区彩云路8号保成泰智汇产业园B栋202 Add: 202, Building B, Baocheng TaiZhihui Industrial Park, No.8 Caiyun Road, Jixiang Community, Longgang District, Shenzhen Electrical Specifications 2400-2500Mhz/5.6-5.8Mhz Apple chart and direction chart Passive - Freq2410.00 MHZ

The test report is only used for customer scientific research, teaching, internal quality control and other purposes, and is for internal reference only. Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Test Report Report No.: MTi230822006-07E1 Date of issue: 2024-03-27 Applicant: HONGKONG ZHINYU TECHNOLOGY CO., LIMITED Product: Wireless TV Headphones Model(s): TH15, TH15-A, TH15-B FCC ID: 2A598-TH15 Shenzhen Microtest Co., Ltd. http://www.mtitest.com Page 2 of 48 Report No.: MTi230822006-07E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Instructions 1. This test report shall not be partially reproduced without the written consent of the laboratory. 2. The test results in this test report are only responsible for the samples submitted 3. This test report is invalid without the seal and signature of the laboratory. 4. This test report is invalid if transferred, altered, or tampered with in any form without authorization. 5. Any objection to this test report shall be submitted to the laboratory within 15 days from the date of receipt of the report. Page 3 of 48 Report No.: MTi230822006-07E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel: (86-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Table of contents 1 General Description ......................................................................................................................... 5 1.1 Description of the EUT ............................................................................................................................... 5 1.2 Description of test modes .......................................................................................................................... 5 1.3 Environmental Conditions .......................................................................................................................... 7 1.4 Description of support units ....................................................................................................................... 7 1.5 Measurement uncertainty .......................................................................................................................... 7 2 Summary of Test Result .................................................................................................................. 8 3 Test Facilities and accreditations ................................................................................................... 9 3.1 Test laboratory ........................................................................................................................................... 9 4 List of test equipment .................................................................................................................... 10 5 Evaluation Results (Evaluation) .................................................................................................... 11 5.1 Antenna requirement ............................................................................................................................... 11 6 Radio Spectrum Matter Test Results (RF) .................................................................................... 12 6.1 Conducted Emission at AC power line .................................................................................................... 12 6.2 Occupied Bandwidth ................................................................................................................................ 15 6.3 Maximum Conducted Output Power ........................................................................................................ 16 6.4 Power Spectral Density ........................................................................................................................... 17 6.5 RF conducted spurious emissions and band edge measurement .......................................................... 18 6.6 Band edge emissions (Radiated) ............................................................................................................ 19 6.7 Radiated emissions (below 1GHz) ......................................................................................................... 24 6.8 Radiated emissions (above 1GHz) .......................................................................................................... 28 Photographs of the test setup ............................................................................................................. 35 Photographs of the EUT....................................................................................................................... 36 Appendix A: DTS Bandwidth ............................................................................................................... 37 Appendix B: Maximum conducted output power ............................................................................... 39 Appendix C: Maximum power spectral density .................................................................................. 41 Appendix D: Band edge measurements ............................................................................................. 43 Appendix E: Conducted Spurious Emission ...................................................................................... 44 Appendix F: Duty Cycle ....................................................................................................................... 47 Page 4 of 48 Report No.: MTi230822006-07E1 Address: 101, No. 7, Zone 2, Xinxing Industrial Park,…

Text truncated - open the document above for the full version.

Page 1 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Photographs of the test setup Model: TH15 Emissions in frequency bands (below 1GHz) Emissions in frequency bands (above 1GHz) Page 2 of 2 Address: 101, No. 7, Zone 2, Xinxing Industrial Park, Fuhai Avenue, Xinhe Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, China Tel : (8 6-755)88850135 Fax: (86-755) 88850136 Web: www.mtitest.com E-mail: [email protected] Conducted Emission at AC power line