2A5OS-G4HHomeBase

Solar-Powered Wireless Security Camera Kit User Manual JA-D300 ✉ [email protected]  +1 217-601-5050 Catalog We strive for the accuracy and completeness of the user manual, but due to product updates, there may be discrepancies with the actual application interface. Please refer to the live interface for the most current information. What's in the Box -----------------------------------------2 Product Overview ----------------------------------------3 Add the Camera Kits to the App ----------------------6 App Interface Introduction ----------------------------12 Mounting the Camera -----------------------------------16 FAQS ---------------------------------------------------------19 Notification of Compliance ----------------------------26 1 Setup Video Scan the QR code above to view the set up video Contact us If you have any questions about our products or services, please feel free to contact us: Email: [email protected] Phone: +1 217-601-5050 Very Important Tips *The Homebase requires continuous power supply using the included power adapter. *To ensure the systems best performance and normal function, please pay attention to the following: 1.Do not install the camera near a heat source. 2.Ensure that there are no reflective objects within 5 feet (1.5 meters) in front of the PIR sensor; otherwise, this may interfere with the PIR sensor. 3.To avoid false alarms, we recommend not installing the camera near shrubs, bushes, tall grass, or overhanging leaves within the PIR detection range. 4.Do not install the camera too far from the Homebase. The product needs to maintain a strong signal with the Homebase to function properly. 5.Once the camera is connected to the Homebase, all videos will be recorded on the memory card inside its Homebase. 2 What's in the Box Homebase x1 Network cable x1 Solar Panel Bracketx2 This product is available in two standard configurations. Actual accessories may vary depending on the kit model purchased: · 2-Camera Kit: HomeBase ×1 + Camera ×2 · 4-Camera Kit: HomeBase ×1 + Camera ×4 Positioning stickers x2 Power for Homebase x1 Type-C cable x2 Camera x2 Screw pack x4 Solar panel x2 User manual x1 3 Product Overview Camera： Antenna LED light & infrared light reset button Human Infrared Sensor(PIR) Working Indicator Light Slowly Blinking Red: Waiting for Homebase pairing Quickly Blinking Red: Wi-Fi is connecting Red Light Turns Blue: Wi-Fi connected Indicator light Microphone Lens 4 Homebase Sync Button❸ Network Indicator Light❶ IPC Indicator Light❷ Ethernet Port❻ TF Card Slot❹ Bottom of Homebase Power Port❺ 5 ❶ Network Indicator Light: Always on: The network connection is normal and smooth. Slow Flashing: Network connection error. Fast Flashing: The network connection is not connected. ❷ IPC Indicator Light: Always on: The camera is connected to the HomeBase normally. Slow Flashing: Abnormal connection between camera and HomeBase. Fast Flashing: The HomeBase is pairing the camera. Light not on: Camera is not added. ❸ Sync Button: Press and hold for 5s to enter the matching state. The HomeBase will search for cameras and establish connections with them. (Note: The HomeBase and camera of this system have been paired before shipped.) ❹ TF Card Slot:Supports up to 128 GBTF card. ❺ Power Port: Plug in the power cable to power the HomeBase. (Note: The Homebase requires continuous power supply using the included power adapter.) ❻ Ethernet Port: Plug in the network cable to connect to the network. 6 Add the Camera Kits to the App 1.Download "EseeCloud" App Search "EseeCloud" in App Store or Google Play, or scan the QR code below to download and install it on your smartphone. Scan to download the APP Note: To ensure the App's normal function, please allow the Notification/ Location permission on your smartphone. EseeCloud 7 2.Register Account New users need to register by email. The concrete steps are as follows: Step 1: Open the "EseeCloud" App to register an account. Go to the login interface then click "Register". Step 2: Enter your correct email address, click and check the circle below, then click "Register" Step 3: Finish safety certification and check your email to get the verification code. 8 Step 4: Enter the verification code and set your app log in password and then click "Confirm". For the security of your account, your password must be at least 6 characters long and must contain at least one uppercase letter, one lowercase letter and one number. Step 5: Congratulations! your app registration is complete. You can now start adding your device. 9 3.Connect the HomeBase to the Internet Step 1: Power On the HomeBase. Use the original power adapter (included in the box) to connect the HomeBase to a power source. For proper operation, ensure the power cable is securely plugged in and the HomeBase remains continuously powered Step 2: Connect the HomeBase to Your Router. Using the included Ethernet cable, connect the HomeBase to an available LAN port on your home router for stable data transmission. Note: Position the HomeBase at least 1 meter from the router to avoid signal interference. 4. Power on the Camera Switch on the power button to turn on the camera. When you hear the voice prompt, it means the camera is powered on. Then proceed to the next step to add HomeBase to the app power on/off 10 5.Connect HomeBase to the App Note: After power on the camera, when the Net indicator light and IPC indicator light of the HomeBase is steadily on, it indicates that the HomeBase is ready for connection. (If the Net indicator light is flashing, this signifies that the Ethernet cable is not properly connected. Please reinsert it until you hear a click sound.) Step 1: Open and log in to the "EseeCloud" app, then tap the "+" icon to add a device. Step 2: Select "Scan to Add" and scan the QR code on the HomeBase device. 11 Step 3: Wait for the device to automatically complete the network connection. Set the device name and purpose. Then, tap "Next" to confirm. Step 4: You have su…

Text truncated - open the document above for the full version.

Page 1 of 27 Report No.: AiTSZ-250830026FW3 Note: This device has been tested and found to comply with the standard(s) listed, this test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. This report shall not be reproduced except in full, without the written approval of Dongguan Yaxu (AiT) Technology Limited. If there is a need to alter or revise this document, the right belongs to Dongguan Yaxu (AiT) Technology Limited, and it should give a prior written notice of the revision document. This test report must not be used by the client to claim product endorsement. Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China TEST REPORT Product Name : HomeBase Brand Name : N/A Model : G4H Series Model : G4S, G4M, G4R, J03, J04, J05, J06, J07, J08, J09, J10, JA-D300 FCC ID : 2A5OS-G4H Applicant : Shenzhen Tino Security Corp., LTD Address : 201, No.7, HeDian Industry Park FuMin Community, FuChengStreet, LongHua District, Shenzhen, China Manufacturer : Shenzhen Tino Security Corp., LTD Address : 201, No.7, HeDian Industry Park FuMin Community, FuChengStreet, LongHua District, Shenzhen, China Standard(s) : FCC CFR Title 47 Part 15 Subpart C Section 15.247 Date of Receipt : Aug. 30, 2025 Date of Test : Sep. 26, 2025~ Oct. 16, 2025 Issued Date : Oct. 17, 2025 Issued By: Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang,Dongguan, Guangdong, China Tel.: +86-769-8202 0499 Fax.: +86-769-8202 0495 Reviewed by: Approved by: Emiya Lin Simba Huang Page 2 of 27 Report No.: AiTSZ-250830026FW3 Report Revise Record Report Version Issued Date Notes M1 Oct. 17, 2025 Initial Release Page 3 of 27 Report No.: AiTSZ-250830026FW3 Contents 1 TEST SUMMARY ....................................................................................................................................................... 4 1.1 TEST STANDARDS ......................................................................................................................................................... 4 1.2 TEST SUMMARY ........................................................................................................................................................... 4 1.3 TEST FACILITY .............................................................................................................................................................. 5 1.4 MEASUREMENT UNCERTAINTY ........................................................................................................................................ 5 2 GENGENERAL INFORMATION ................................................................................................................................... 6 2.1 ENVIRONMENTAL CONDITIONS ........................................................................................................................................ 6 2.2 GENERAL DESCRIPTION OF EUT ...................................................................................................................................... 6 2.3 DESCRIPTION OF TEST MODES AND TEST FREQUENCY .......................................................................................................... 7 2.4 SPECIAL ACCESSORIES ................................................................................................................................................... 8 2.5 EQUIPMENT LIST FOR THE TEST ....................................................................................................................................... 8 3 TEST CONDITIONS AND RESULTS .............................................................................................................................. 8 3.1 CONDUCTED EMISSIONS TEST ....................................................................................................................................... 10 3.2 RADIATED EMISSIONS AND BAND EDGE .......................................................................................................................... 14 3.3 MAXIMUM PEAK CONDUCTED OUTPUT POWER ............................................................................................................... 21 3.4 POWER SPECTRAL DENSITY .......................................................................................................................................... 22 3.5 6DB BANDWIDTH ....................................................................................................................................................... 23 3.6 OUT-OF-BAND EMISSIONS ........................................................................................................................................... 24 3.7 ANTENNA REQUIREMENT ............................................................................................................................................. 25 4 TEST SETUP PHOTOGRAPHS OF EUT ....................................................................................................................... 26 5 PHOTOS OF EUT ..................................................................................................................................................... 27 Page 4 of 27 Report No.: AiTSZ-250830026FW3 1 TEST SUMMARY 1.1 Test Standards The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz ANSI C63.10: 2020: American National Standard for Testing Unlicensed Wireless Devices KDB558074 D01 15.247 Meas Guidance v05r02: Guidance for Compliance Measurements on Digital Transmission System, Frequency Hopping Spreda Spectrum System, and Hybrid System Devices Operating Under Section 15.247 of the FCC Rules 1.2 Test Summary…

Text truncated - open the document above for the full version.

Page 1 of 2 FCC ID: 2A5OS-G4H Page 2 of 2 FCC ID: 2A5OS-G4H

Page 39 of 47 Report No.: AiTSZ-250830026FW3 802.11b_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant0 (SISO)_NTNV Page 40 of 47 Report No.: AiTSZ-250830026FW3 802.11g_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11g_MCH_2437MHz_Ant0 (SISO)_NTNV Page 41 of 47 Report No.: AiTSZ-250830026FW3 802.11g_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant0 (SISO)_NTNV Page 42 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11n(HT20)_LCH_2412MHz_Ant0 (SISO)_NTNV Page 43 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11n(HT20)_HCH_2462MHz_Ant0 (SISO)_NTNV Page 44 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant0 (SISO)_NTNV Page 45 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT40)_LCH_2422MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_MCH_2437MHz_Ant0 (SISO)_NTNV Page 46 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT40)_HCH_2452MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant0 (SISO)_NTNV Page 47 of 47 Report No.: AiTSZ-250830026FW3 6. Form731 6.1 Test Result 6.1.1 Form731 Lower Freq (MHz) High Freq (MHz) MAX Power (W) MAX Power (dBm) 2412 2462 0.0243 13.85 2422 2452 0.0160 12.05

Page 1 of 47 Report No.: AiTSZ-250830026FW3 Appendix RF test data for WIFI2.4G- Module2 Page 2 of 47 Report No.: AiTSZ-250830026FW3 1. Duty Cycle 1.1 Test Result 1.1.1 Ant0 Ant0 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11b SISO 2412 8.417 8.627 97.57 0.11 0.04 2437 8.417 8.627 97.57 0.11 0.04 2462 8.417 8.627 97.57 0.11 0.04 802.11g SISO 2412 1.396 1.606 86.92 0.61 0.03 2437 1.396 1.605 86.98 0.61 0.03 2462 1.397 1.605 87.04 0.60 0.03 802.11n (HT20) SISO 2412 1.309 1.518 86.23 0.64 0.03 2437 1.309 1.517 86.29 0.64 0.04 2462 1.309 1.517 86.29 0.64 0.03 802.11n (HT40) SISO 2422 0.649 0.858 75.64 1.21 0.03 2437 0.650 0.858 75.76 1.21 0.04 2452 0.650 0.859 75.67 1.21 0.03 Page 3 of 47 Report No.: AiTSZ-250830026FW3 1.2 Test Graph 1.2.1 Ant0 802.11b_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant0 (SISO)_NTNV Page 4 of 47 Report No.: AiTSZ-250830026FW3 802.11b_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant0 (SISO)_NTNV Page 5 of 47 Report No.: AiTSZ-250830026FW3 802.11g_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant0 (SISO)_NTNV Page 6 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant0 (SISO)_NTNV Page 7 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant0 (SISO)_NTNV Page 8 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT40)_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant0 (SISO)_NTNV Page 9 of 47 Report No.: AiTSZ-250830026FW3 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 0 12.331 / Pass 2437 0 12.364 / Pass 2462 0 12.414 / Pass 802.11g SISO 2412 0 17.377 / Pass 2437 0 17.382 / Pass 2462 0 17.469 / Pass 802.11n (HT20) SISO 2412 0 18.264 / Pass 2437 0 18.374 / Pass 2462 0 18.432 / Pass 802.11n (HT40) SISO 2422 0 36.582 / Pass 2437 0 36.476 / Pass 2452 0 36.513 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 0 8.175 >=0.5 Pass 2437 0 8.185 >=0.5 Pass 2462 0 8.187 >=0.5 Pass 802.11g SISO 2412 0 16.107 >=0.5 Pass 2437 0 15.919 >=0.5 Pass 2462 0 15.987 >=0.5 Pass 802.11n (HT20) SISO 2412 0 16.920 >=0.5 Pass 2437 0 16.734 >=0.5 Pass 2462 0 17.125 >=0.5 Pass 802.11n (HT40) SISO 2422 0 35.439 >=0.5 Pass 2437 0 35.306 >=0.5 Pass 2452 0 35.332 >=0.5 Pass Page 10 of 47 Report No.: AiTSZ-250830026FW3 2.2 Test Graph 2.2.1 OBW 802.11b_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant0 (SISO)_NTNV Page 11 of 47 Report No.: AiTSZ-250830026FW3 802.11b_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant0 (SISO)_NTNV Page 12 of 47 Report No.: AiTSZ-250830026FW3 802.11g_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant0 (SISO)_NTNV Page 13 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant0 (SISO)_NTNV Page 14 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant0 (SISO)_NTNV Page 15 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT40)_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant0 (SISO)_NTNV Page 16 of 47 Report No.: AiTSZ-250830026FW3 2.2.2 6dB BW 802.11b_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant0 (SISO)_NTNV Page 17 of 47 Report No.: AiTSZ-250830026FW3 802.11b_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant0 (SISO)_NTNV Page 18 of 47 Report No.: AiTSZ-250830026FW3 802.11g_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant0 (SISO)_NTNV Page 19 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant0 (SISO)_NTNV Page 20 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant0 (SISO)_NTNV Page 21 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT40)_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant0 (SISO)_NTNV Page 22 of 47 Report No.: AiTSZ-250830026FW3 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT0 Limit 802.11b SISO 2412 13.21 <=30 Pass 2437 13.67 <=30 Pass 2462 13.85 <=30 Pass 802.11g SISO 2412 12.68 <=30 Pass 2437 13.02 <=30 Pass 2462 13.13 <=30 Pass 802.11n (HT20) SISO 2412 10.23 <=30 Pass 2437 10.31 <=30 Pass 2462 12.44 <=30 Pass 802.11n (HT40) SISO 2422 12.05 <=30 Pass 2437 10.32 <=30 Pass 2452 10.51 <=30 Pass Note1: Antenna Gain: Ant0: 4.76dBi; Page 23 of 47 Report No.: AiTSZ-250830026FW3 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm) Verdict ANT0 Limit 802.11b SISO 2412 3.06 <=8 Pass 2437 -2.31 <=8 Pass 2462 3.31 <=8 Pass 802.11g SISO 2412 -5.00 <=8 Pass 2437 -4.23 <=8 Pass 2462 -4.33 <=8 Pass 802.11n (HT20) SISO 2412 -7.18 <=8 Pass 2437 -6.78 <=8 Pass 2462 -4.82 <=8 Pass 802.11n (HT40) SISO 2422 -9.05 <=8 Pass 2437 -10.52 <=8 Pass 2452 -10.45 <=8 Pass Note1: Antenna Gain: Ant0: 4.76dBi; Page 24 of 47 Report No.: AiTSZ-250830026FW3 4.2 Test Graph 4.2.1 PSD 802.11b_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant0 (SISO)_NTNV Page 25 of 47 Report No.: AiTSZ-250830026FW3 802.11b_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant0 (SISO)_NTNV Page 26 of 47 Report No.: AiTSZ-250830026FW3 802.11g_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant0 (SISO)_NTNV Page 27 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_LCH_2412MHz_Ant0 (SISO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant0 (SISO)_NTNV Page 28 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT20)_HCH_2462MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant0 (SISO)_NTNV Page 29 of 47 Report No.: AiTSZ-250830026FW3 802.11n(HT40)_MCH_2437MHz_Ant0 (SISO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant0 (SISO)_NTNV Page 30 of 47 Report No.: AiTSZ-250830026FW3 5. Unwanted Emissions In Non-restricted Frequency Bands 5.1 Test Result 5.1.1 Ref Mode TX Type Frequency (MHz) A…

Text truncated - open the document above for the full version.

Page 40 of 56 Report No.: AiTSZ-250830026FW2 5.2 Test Graph 5.2.1 Ref 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 41 of 56 Report No.: AiTSZ-250830026FW2 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 42 of 56 Report No.: AiTSZ-250830026FW2 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 43 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV Page 44 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV Page 45 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT40)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV Page 46 of 56 Report No.: AiTSZ-250830026FW2 5.2.2 CSE 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV Page 47 of 56 Report No.: AiTSZ-250830026FW2 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV Page 48 of 56 Report No.: AiTSZ-250830026FW2 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 49 of 56 Report No.: AiTSZ-250830026FW2 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV Page 50 of 56 Report No.: AiTSZ-250830026FW2 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 51 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV Page 52 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV Page 53 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV Page 54 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_MCH_2437MHz_Ant1 (MIMO)_NTNV Page 55 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV Page 56 of 56 Report No.: AiTSZ-250830026FW2 6. Form731 6.1 Test Result 6.1.1 Form731 Lower Freq (MHz) High Freq (MHz) MAX Power (W) MAX Power (dBm) 2412 2462 0.0456 16.59 2422 2452 0.0363 15.60

Page 1 of 56 Report No.: AiTSZ-250830026FW2 Appendix RF test data for WIFI2.4G- Module1 Page 2 of 56 Report No.: AiTSZ-250830026FW2 1. Duty Cycle 1.1 Test Result 1.1.1 Ant1 Ant1 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 802.11b SISO 2412 8.416 8.626 97.57 0.11 0.04 2437 8.416 8.626 97.57 0.11 0.04 2462 8.416 8.626 97.57 0.11 0.04 802.11g SISO 2412 1.396 1.606 86.92 0.61 0.03 2437 1.396 1.605 86.98 0.61 0.03 2462 1.397 1.605 87.04 0.60 0.07 802.11n (HT20) MIMO 2412 1.309 1.518 86.23 0.64 0.07 2437 1.309 1.516 86.35 0.64 0.03 2462 1.309 1.517 86.29 0.64 0.03 802.11n (HT40) MIMO 2422 0.649 0.858 75.64 1.21 0.06 2437 0.650 0.857 75.85 1.20 0.04 2452 0.649 0.857 75.73 1.21 0.04 Page 3 of 56 Report No.: AiTSZ-250830026FW2 1.2 Test Graph 1.2.1 Ant1 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 4 of 56 Report No.: AiTSZ-250830026FW2 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 5 of 56 Report No.: AiTSZ-250830026FW2 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 6 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV Page 7 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV Page 8 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT40)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV Page 9 of 56 Report No.: AiTSZ-250830026FW2 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 12.340 / Pass 2437 1 12.379 / Pass 2462 1 12.418 / Pass 802.11g SISO 2412 1 17.405 / Pass 2437 1 17.372 / Pass 2462 1 17.441 / Pass 802.11n (HT20) MIMO 2412 1 18.211 / Pass 2437 1 18.397 / Pass 2462 1 18.483 / Pass 802.11n (HT40) MIMO 2422 1 36.543 / Pass 2437 1 36.628 / Pass 2452 1 36.578 / Pass Remark: All modes have been tested, and only the worst data is displayed 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 802.11b SISO 2412 1 8.179 >=0.5 Pass 2437 1 8.185 >=0.5 Pass 2462 1 8.188 >=0.5 Pass 802.11g SISO 2412 1 15.740 >=0.5 Pass 2437 1 15.786 >=0.5 Pass 2462 1 15.896 >=0.5 Pass 802.11n (HT20) MIMO 2412 1 17.157 >=0.5 Pass 2437 1 16.723 >=0.5 Pass 2462 1 17.015 >=0.5 Pass 802.11n (HT40) MIMO 2422 1 35.484 >=0.5 Pass 2437 1 35.043 >=0.5 Pass 2452 1 35.522 >=0.5 Pass Remark: All modes have been tested, and only the worst data is displayed Page 10 of 56 Report No.: AiTSZ-250830026FW2 2.2 Test Graph 2.2.1 OBW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 11 of 56 Report No.: AiTSZ-250830026FW2 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 12 of 56 Report No.: AiTSZ-250830026FW2 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 13 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV Page 14 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV Page 15 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT40)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV Page 16 of 56 Report No.: AiTSZ-250830026FW2 2.2.2 6dB BW 802.11b_LCH_2412MHz_Ant1 (SISO)_NTNV 802.11b_MCH_2437MHz_Ant1 (SISO)_NTNV Page 17 of 56 Report No.: AiTSZ-250830026FW2 802.11b_HCH_2462MHz_Ant1 (SISO)_NTNV 802.11g_LCH_2412MHz_Ant1 (SISO)_NTNV Page 18 of 56 Report No.: AiTSZ-250830026FW2 802.11g_MCH_2437MHz_Ant1 (SISO)_NTNV 802.11g_HCH_2462MHz_Ant1 (SISO)_NTNV Page 19 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_LCH_2412MHz_Ant1 (MIMO)_NTNV 802.11n(HT20)_MCH_2437MHz_Ant1 (MIMO)_NTNV Page 20 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT20)_HCH_2462MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_LCH_2422MHz_Ant1 (MIMO)_NTNV Page 21 of 56 Report No.: AiTSZ-250830026FW2 802.11n(HT40)_MCH_2437MHz_Ant1 (MIMO)_NTNV 802.11n(HT40)_HCH_2452MHz_Ant1 (MIMO)_NTNV Page 22 of 56 Report No.: AiTSZ-250830026FW2 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT1 ANT2 MIMO Limit 802.11b SISO 2412 15.18 12.62 / <=28.76 Pass 2437 15.96 13.14 / <=28.76 Pass 2462 16.59 13.17 / <=28.76 Pass 802.11g SISO 2412 15.45 16.34 / <=28.76 Pass 2437 15.91 16.00 / <=28.76 Pass 2462 14.25 14.59 / <=28.76 Pass 802.11n (HT20) MIMO 2412 11.53 12.58 15.10 <=28.76 Pass 2437 11.83 12.94 15.43 <=28.76 Pass 2462 12.15 13.13 15.68 <=28.76 Pass 802.11n (HT40) MIMO 2422 11.89 12.55 15.24 <=28.76 Pass 2437 12.21 12.74 15.49 <=28.76 Pass 2452 12.48 12.70 15.60 <=28.76 Pass Note1: Antenna Gain: Ant1: 4.48dBi; Ant2: 3.97dBi; Directional gain：7.24dBi Note2: Directional gain = 10 log[(10^G1/10+10^G2/10+...10^GN/10)^2/NANT], where G is the antenna gain in dBi, NANT it's the number of antennas. Note3: Average Power Limit (dBm) = 30 dBm - (7.24 dBi - 6 dBi) = 28.76dBm. Page 23 of 56 Report No.: AiTSZ-250830026FW2 4. Maximum Power Spectral Density 4.1 Test Result 4.1.1 PSD Mode TX Type Frequency (MHz) Maximum PSD (dBm) Verdict ANT1 ANT2 MIMO Limit 802.11b SISO 2412 4.90 2.39 / <=6.76 Pass 2437 5.28 2.88 / <=6.76 Pass 2462 6.39 2.90 / <=6.76 Pass 802.11g SISO 2412 -1.96 -2.17 / <=6.76 Pass 2437 -1.34 -2.35 / <=6.76 Pass 2462 -3.86 -3.59 / <=6.76 Pass 802.11n (HT20) MIMO 2412 -5.95 -5.36 -2.64 <=6.76 Pass 2437 -5.44 -5.32 -2.37 <=6.76 Pass 2462 -5.05 -5.25 -2.14 <=6.76 Pass 802.11n (HT40) MIMO 2422 -9.26 -8.75 -6.10 <=6.76 Pass 2437 -8.64 -8.56 -5.65 <=6.76 Pass 2452 -8.56 -8.59 -5.66 <=6.76 Pass Note1: Antenna Gain: Ant1: 4.48dBi; Ant2: 3.97dBi; Directional gain：7.24dBi Note2: Directional gain = 10 log[(10^G1/10+10^G2/10+...10^GN/10)^2/NANT], where G is the antenna gain in dBi, NANT it's the number of antennas. Note3: Note3: PSD…

Text truncated - open the document above for the full version.

Page 1 of 29 Report No.: AiTSZ-250830026FW1 Appendix RF test data for BLE Page 2 of 29 Report No.: AiTSZ-250830026FW1 1. Duty Cycle 1.1 Test Result 1.1.1 Ant0 Ant0 Mode TX Type Frequency (MHz) T_on (ms) Period (ms) Duty Cycle (%) Duty Cycle Correction Factor (dB) Max. DC Variation (%) 1M SISO 2402 1.679 1.876 89.50 0.48 0.03 2440 1.679 1.875 89.55 0.48 0.03 2480 1.679 1.875 89.55 0.48 0.03 2M SISO 2402 0.866 1.250 69.28 1.59 0.01 2440 0.866 1.251 69.22 1.60 0.03 2480 0.865 1.250 69.20 1.60 0.03 Page 3 of 29 Report No.: AiTSZ-250830026FW1 1.2 Test Graph 1.2.1 Ant0 1M_LCH_2402MHz_Ant0_NTNV 1M_MCH_2440MHz_Ant0_NTNV Page 4 of 29 Report No.: AiTSZ-250830026FW1 1M_HCH_2480MHz_Ant0_NTNV 2M_LCH_2402MHz_Ant0_NTNV Page 5 of 29 Report No.: AiTSZ-250830026FW1 2M_MCH_2440MHz_Ant0_NTNV 2M_HCH_2480MHz_Ant0_NTNV Page 6 of 29 Report No.: AiTSZ-250830026FW1 2. Bandwidth 2.1 Test Result 2.1.1 OBW Mode TX Type Frequency (MHz) ANT 99% Occupied Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 0 1.013 / Pass 2440 0 1.013 / Pass 2480 0 1.014 / Pass 2M SISO 2402 0 2.026 / Pass 2440 0 2.031 / Pass 2480 0 2.030 / Pass 2.1.2 6dB BW Mode TX Type Frequency (MHz) ANT 6dB Bandwidth (MHz) Verdict Result Limit 1M SISO 2402 0 0.669 >=0.5 Pass 2440 0 0.665 >=0.5 Pass 2480 0 0.665 >=0.5 Pass 2M SISO 2402 0 1.179 >=0.5 Pass 2440 0 1.177 >=0.5 Pass 2480 0 1.172 >=0.5 Pass Page 7 of 29 Report No.: AiTSZ-250830026FW1 2.2 Test Graph 2.2.1 OBW 1M_LCH_2402MHz_Ant0_NTNV 1M_MCH_2440MHz_Ant0_NTNV Page 8 of 29 Report No.: AiTSZ-250830026FW1 1M_HCH_2480MHz_Ant0_NTNV 2M_LCH_2402MHz_Ant0_NTNV Page 9 of 29 Report No.: AiTSZ-250830026FW1 2M_MCH_2440MHz_Ant0_NTNV 2M_HCH_2480MHz_Ant0_NTNV Page 10 of 29 Report No.: AiTSZ-250830026FW1 2.2.2 6dB BW 1M_LCH_2402MHz_Ant0_NTNV 1M_MCH_2440MHz_Ant0_NTNV Page 11 of 29 Report No.: AiTSZ-250830026FW1 1M_HCH_2480MHz_Ant0_NTNV 2M_LCH_2402MHz_Ant0_NTNV Page 12 of 29 Report No.: AiTSZ-250830026FW1 2M_MCH_2440MHz_Ant0_NTNV 2M_HCH_2480MHz_Ant0_NTNV Page 13 of 29 Report No.: AiTSZ-250830026FW1 3. Maximum Conducted Output Power 3.1 Test Result 3.1.1 Power Mode TX Type Frequency (MHz) Maximum Peak Conducted Output Power (dBm) Verdict ANT0 Limit 1M SISO 2402 0.21 <=30 Pass 2440 0.46 <=30 Pass 2480 0.26 <=30 Pass 2M SISO 2402 0.57 <=30 Pass 2440 0.51 <=30 Pass 2480 0.31 <=30 Pass Note1: Antenna Gain: Ant0: 0.00dBi; Page 14 of 29 Report No.: AiTSZ-250830026FW1 3.2 Test Graph 3.2.1 Power 1M_LCH_2402MHz_Ant0_NTNV 1M_MCH_2440MHz_Ant0_NTNV Page 15 of 29 Report No.: AiTSZ-250830026FW1 1M_HCH_2…

Text truncated - open the document above for the full version.