2A5UA-W76C25W Magnetic Wireless Charger

T To maintain compliance with FCC's RF exposure guidelines, the distance must be at least 20 cm between the radiator and your body, and fully supported by the operating and installation configurations of the transmitter and its antenna(s). The device has been evaluated to meet general RF exposure requirement. Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. such modifications could void the user's authority to operate the equipment. —Consult the dealer or an experienced radio/TV technician for help. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Increase the separation between the equipment and receiver. —Reorient or relocate the receiving antenna. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: his device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Statement

1/1 US Agent for Service of Process LETTER OF ATTESTATION TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 US Agent for Service of Process : Company Name: QPS America, Inc. FRN: 0033412354 Contact Name: Steven Lee Address: 5700 Crooks Road – Suite 450, Troy, MI 48098 USA Telephone No: 216-377-3191 Email: [email protected] Applicant: Company name: Shenzhen Autige Technology Co., Ltd. Product Description: 25W Magnetic Wireless Charging Stand FRN: 0032137861 Grantee code: 2A5UA FCC ID: 2A5UA-W76C Contact Name: She Ran Address:3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District,Shenzhen,China Telephone No:+86 18126140483 Email: [email protected] [Shenzhen Autige Technology Co., Ltd.] certifies that, as of the date of this filing of the application with the TCB, [QPS America, Inc.] is our designated US agent for service of process for the above referenced FCC ID. [Shenzhen Autige Technology Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any commission related proceeding involving equipment. [QPS America, Inc.] accepts, as of the date of the filing of the application, the obligation of the designated US agent for service of process for the above reference FCC ID. The US Agent for Service of Process is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. The Applicant is aware of and agrees to comply with the requirements outlined in the FCC Equipment Authorization Program, Report and Order FCC 22-84, and clause § 2.911. Date: 2026/07/13 Applicant’s Name: She RanUS Agent’s Name: Steven Lee Title:Title: Managing Director SignatureSignature

Attestation Statement. Old Code: C5266091 24 New Code: 00015544 Ed.3 Change reason: FRN is added to the Applicant information section. 1/1 TO: Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 The Commission adopted rules that prohibit equipment authorization for “covered” telecommunications equipment and video surveillance equipment produced by entities identified on the Commission’s Covered List 1 , which is periodically updated. See the Covered List for more details. This Attestation Statement is to confirm that we follow the Section 2.911(d)(5)(i)-(ii) Applicant Company name: Shenzhen Autige Technology Co., Ltd. Grantee code: 2A5UA FCC ID: 2A5UA-W76C FRN: 0032137861 Contact Name: She Ran Address: 3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Telephone No: 18126140483 Fax No: / Email: [email protected] i.[Shenzhen Autige Technology Co., Ltd.] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. The applicant must sign this certification. ii.[Shenzhen Autige Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] (as a specifically named entity or any of its subsidiaries or affiliates) identified on the Covered List as an entity producing “covered” equipment. The applicant must sign this certification. [Shenzhen Autige Technology Co., Ltd.] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered List as an entity producing “covered” equipment . Date: 2026/07/09 Applicant’s Name: She Ran Title: General Manager Signature: 1 The Commission’s Covered List is published by the Public Safety and Homeland Security Bureau and posted on the Commission’s website. This Covered List, which is periodically updated, identifies particular equipment, produced by particular entities, that constitutes “covered” equipment. https://www.fcc.gov/supplychain/coveredlist

Shenzhen Autige Technology Co., Ltd Product Similarity Declaration Product name: 25W Magnetic Wireless Charger Model name: W76A, W76B, W76C FCC ID: 2A5UA-W76C We (Shenzhen Autige Technology Co., Ltd) hereby state that all the models are electrical identical including the same software parameter and hardware design (i.e., circuit design, PCB Layout, RF module/circuit, antenna type(s) and antenna location, components on PCB, etc.,), same mechanical structure and design (including product enclosure, materials, etc.,), the only difference is the model name. Signature: Name: She Ran Title: General Manager Place, date: 2026/07/14

TCB CALL página 1 File FCC ID: 2A5UA-W76C Please upload an exhibit that explains how does the TCB verify the new agent information: 1- Is the address of the agent a valid physical US mailing address (not a US post office box, not a virtual mailbox, not P.O. Boxes, not a vacant lot, not a public building, etc.) ○ We have checked if the address exists in a real and potential building (Google maps) + official US register, after this verification and the evidence below we can guarantee the following: not a US post office box not a virtual mailbox not P.O. Boxes not a vacant lot not a public building(note) ► We checked the FCC FRN Search based on the information provided by the grantee. On the official register from : https://businesssearch.ohiosos.gov?=businessDetails/1961919 TCB CALL página 2 In google: Official wenbsite: https://qpsamerica.com/ TCB CALL página 3 ► CONCLUSION by TCB: The ASOP defined and provided by grantee is VALID and confirmed. Therefore the exhibit "C5266091_X23_Ed2_US_Agent_Letter " included in the file is ok. 2- Is the agent physically located at that valid US address such that the agent can be legally served at that address? Yes , check above 3- Has the listed agent clearly agreed in writing to serve as the agent for the grantee at that address? Yes, it is included in the exhibit " C5266091_X23_Ed2_US_Agent_Letter " >

Shenzhen Autige Technology Co., Ltd. Code 00018768 Ed. 1 Item 1. The device is able to install software/program installation? ☐ Yes, go to Item 2. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky cybersecurity or anti-virus software. Item 2. Technical Requirements for Kaspersky Cybersecurity Software: #General Requirements (For all Devices)Yes / No or N/AComments 1Internet connection for activation and updates (For all Operating Systems) N/A Device25W Magnetic Wireless Charger Company nameShenzhen Autige Technology Co., Ltd. Grantee code2A5UA FCC ID2A5UA-W76C FRN0032137861 Contact nameShe Ran Address3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Telephone number18126140483 [email protected] Chipset/module informationIP6802B Operating System (if applicable)N/A Storage Capacity (hard drive or other permanent memory storage, if applicable) N/A 2 #General Requirements (For Windows Devices)Yes / No or N/AComments 1Storage: 1500 MB free space on the hard driveN/A 2Operating System: Microsoft Windows 8, 8.1, 10 & 11 Home / Pro / Enterprise Microsoft Windows 7 Starter / Home Basic & Premium / Professional / Ultimate SP1 or higher N/A 3Processor: 1 GHz or higher (x86 or x64)N/A 4Memory (RAM)1 GB (32-bit) or 2 GB (64-bit)N/A 5Screen Resolution: Minimum resolution of 1024 x 768N/A #General Requirements (For macOS devices)Yes / No or N/AComments 1Operating System macOS® 13 – 14N/A 2Memory (RAM)4 GBN/A 3Storage: 3455 MB free space on the hard driveN/A #General Requirements (For Android Devices)Yes / No or N/AComments 1Storage: 150 MB free spaceN/A 2Operating System: Android™ 10 – 14N/A 3Screen Resolution: Minimum resolution of 320 x 480N/A #General Requirements (for iOS devices)Yes / No or N/AComments 1Storage: 150 MB free spaceN/A 2Operating System: iOS® 17N/A #General Requirements (For Linux system)Yes / No or N/AComments 3 1Hard drive: 1 GB of free spaceN/A 2CPU: Intel Pentium 1 GHz or higherN/A 3RAM: 1 GBN/A 4Minimum software requirements: AlmaLinux OS 8 or later; AlterOS 7.5 or later; Astra Linux Common Edition 2.12 or later; CentOS 6.7 or later; Debian GNU/Linux 10.0 or later; EulerOS 2.0 or later; Oracle Linux 7.3 or later ; Red Hat Enterprise Linux 6.7 or later ; Rocky Linux 8.5 or later ; SUSE Linux Enterprise Server 12.5 or later; Ubuntu 12.04 or later ; Uncom OS Home / Business / Education / Enterprise 2.2 or later; ALT Linux Workstaton / Workstation K / Server / Education 8 or later; ROSA Linux Workstation / Server 12 or later ; RED OS 7.3 and later ; N/A After reviewed the technical requirements, is the device capable of supporting the installation of Kaspersky software? ☐ Yes, go to Item 3. ☒ No. In this case, the rest of the items do not apply. The device cannot support installation of Kaspersky software Item 3. Connectivity Capabilities: 4 #Physical InterfacePurposeJustification 1 1 #Wireless InterfacePurposeJustification 1 1 After the review of this items, the device: ☒ Cannot support installation of any cybersecurity or anti-virus software on the covered list. ☐ Potentially can operate with any cybersecurity or anti-virus software on the covered list – additional third- party proof is provided to demonstrate compliance with requirements as of 2.911(d)5(i),(ii) – “Proof of Compliance with Covered List Software Requirements” of this document applies Signature: Name: She Ran Date: 2026/07/09 1 The justification field is used to justify why the software cannot be received through that interface. Check the annex for more indications. 5 Proof of Compliance with Covered List Software Requirements 1. Did a test Firm or third party (other than the certification body and applicant) provide a list of software installed on the device and after scan results with no evidence of Kaspersky software? ☐ YES ☐ NO ☒ N/A If YES, provide: File Name: Third-Party Name (including Test Firm: Has other objective evidence been provided that no Kaspersky software is installed? ☐ YES ☒ NO ☐ N/A If YES, provide: File Name: Third-Party Name (including Test Firm: Signature: Name: Date: Once the document is filled in, please proceed to print a PDF of this Word 6 Annex . Example of how to fill the Table Connectivity Capabilities #Physical InterfacesPurposeJustification 1USB Type-C portBattery charging only-Limited to power supply -Data transfer capability disabled 2HDMIVideo output only-Communication limited to specific IP addresses -Port blocked for software downloads 3RJ-45 portEthernet connectivity for operational data transmission -Communication limited to specific IP addresses -Port blocked for software downloads #Wireless InterfacesPurposeJustication 1Wi-FiExplain the purpose...-Built-in firewall that blocks software downloads 2BluetoothExplain the purpose...-No file transfer capability -Pairing limited to authorized devices 3NFCExplain the purpose...-Passive mode only -No write capability

Shenzhen Autige Technology Co., Ltd. 1/1 Letter of Authorization Company:Shenzhen Autige Technology Co., Ltd. Address:3 rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Product Name:2 5W Magnetic Wireless Charger Model Number: W76C, W76B, W76A FCC Identifier:2 A5UA-W76C We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: She RanDate: 2026-07-09 Title:General Manager Signature of applicant:

C5266091_X10_Ed.2 1/1 Shenzhen Autige Technology Co., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2026-07-09 Subject: Request for Confidentiality FCC ID: 2A5UA-W76C To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential document from public disclosure. ExhibitsLong-Term Confidentiality Short-Term Confidentiality NOTE 2 ID Label/LocationNoNo Attestation StatementNoNo External PhotosNo ☐ Block Diagram ☒☐ Schematics ☒☐ Test ReportNoNo Test Setup PhotosNo ☐ User’s Manual ☐ NOTE 1 ☐ Internal Photos ☐ NOTE 1 ☐ Parts List / Tune Up ☐☐ RF Exposure InfoNoNo Operational Description ☒☐ Cover Letter(s)NoNo SDR Software / Security Info ☐ No NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of KDB 726920, use last in force) NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant. Above mentioned document contains detailed system and equipment description are considered as proprietary information in operation of the equipment. The public disclosure of above documents might be harmful to our company and would give competitor an unfair advantage in the market. In case of short-term Confidentiality, the applicant requests the exhibits selected above are withheld from public view for a period of ______ days from the date of the Grant of Equipment Authorization and prior to marketing. It is our understanding that all measurement test reports, FCC ID label format and correspondent during certification review process cannot be granted as confidential documents and those information will be available for public review once the grant of equipment authorization is issued. C5266091_X10_Ed.2 1/1 Sincerely, Signature: Name:She Ran Title: General Manager

Page 1 of 2 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Details of: External view Details of: External view Page 2 of 2 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Details of: External view Details of: External view

FCC ID: 2A5UA-W76C

Page 1 of 2 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Details of: Internal view Details of: Wireless charging winding view Antenna Page 2 of 2 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Details of: PCB view Details of: PCB view

Test Report issued under the responsibility of: Itestek Testing Co., Ltd. (Dongguan) TEST REPORT Report number .............................:ITA26B06001047W 002 Test date .......................................:2026-06-10 to 2026-07-01 Issue date .....................................:2026-07-16 Total number of pages ................:12 Standard/according to ................:KDB 680106 D01 Wireless Power Transfer v04 Testing laboratory .......................:Itestek Testing Co., Ltd.(Dongguan) Address ........................................:Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Template version .........................:V2.0 Tested by ......................................:Tom Zhang Checked by...................................:Oliver Qiao Approved by .................................:Rock Huang Applicant’s name .........................:Shenzhen Autige Technology Co., Ltd Address ........................................:3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Manufacturer’s name...................:Shenzhen Autige Technology Co., Ltd Address ........................................:3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Factory’s name ............................:Shenzhen Autige Technology Co., Ltd Address ........................................:3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Trade mark ...................................:N/A Product description .....................:25W Magnetic Wireless Charger Model/Type reference ..................:W76A, W76B, W76C Ratings..........................................:Input: 5Vdc 3A, 9Vdc 3A, 12Vdc 3A, 15Vdc 3A PPS: 5V-21Vdc, 2A Wireless charging output: 5W, 7.5W, 10W, 15W, 25W FCC ID ...........................................:2A5UA-W76C Test result.....................................:Pass Report No.: ITA26B06001047W 002Page 2 of 12 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China VERSION Revision History of Report Report No.VersionDescriptionIssue Date ITA26B06001047W 002Rev.01Initial report2026-07-01 Report No.: ITA26B06001047W 002Page 3 of 12 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China 1.GENERAL TEST INFORMATION 1.1DESCRIPTION OF EUT Details of technical specification refer to the description in follows: Product:25W Magnetic Wireless Charger Model Number:W76C Additional Model:W76A, W76B Different:All models are identical, except model name. Frequency Range:110.1kHz-205kHz, 360kHz Modulation Technique:ASK Antenna Type:Coil Antenna Antenna Gain:0 dBi Temperature Range:-20°C ~ +35°C Hardware version:V1.0 Software version:V1.0 Report No.: ITA26B06001047W 002Page 4 of 12 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China 1.2TEST MODES Test Modes: Mode 1AC Mains + Mobile phone charging mode for output 5W (110.1k-205kHz) (Battery Status: ≤1%) Mode 2AC Mains + Mobile phone charging mode for output 5W (110.1k-205kHz) (Battery Status: 50%) Mode 3AC Mains + Mobile phone charging mode for output 5W (110.1k-205kHz) (Battery Status: ≥99%) Mode 4 AC Mains + Mobile phone charging mode for output 7.5W (110.1k-205kHz) (Battery Status: ≤1%) Mode 5 AC Mains + Mobile phone charging mode for output 7.5W (110.1k-205kHz) (Battery Status: 50%) Mode 6 AC Mains + Mobile phone charging mode for output 7.5W (110.1k-205kHz) (Battery Status: ≥99%) Mode 7AC Mains + Mobile phone charging mode for output 10W (110.1k-205kHz) (Battery Status: ≤1%) Mode 8AC Mains + Mobile phone charging mode for output 10W (110.1k-205kHz) (Battery Status: 50%) Mode 9 AC Mains + Mobile phone charging mode for output 10W (110.1k-205kHz) (Battery Status: ≥99%) Mode 10AC Mains + Mobile phone charging mode for output 15W (110.1k-205kHz) (Battery Status: ≤1%) Mode 11AC Mains + Mobile phone charging mode for output 15W (110.1k-205kHz) (Battery Status: 50%) Mode 12 AC Mains + Mobile phone charging mode for output 15W (110.1k-205kHz) (Battery Status: ≥99%) Mode 13AC Mains + Mobile phone charging mode for output 25W (360kHz) (Battery Status: ≤1%) Mode 14AC Mains + Mobile phone charging mode for output 25W (360kHz) (Battery Status: 50%) Mode 15AC Mains + Mobile phone charging mode for output 25W (360kHz) (Battery Status: ≥99%) Note: All modes have been tested, and only the most severe test data is presented. 1.3AUXILIARY EQUIPMENT ItemEquipmentMfr/BrandModel/Type No.Series No.Note 1LoadAppleIphone 17---- 2Power supplyAutigePD power 45W---- 2.RF EXPOSURE TEST 2.1MEASURING STANDARD KDB 680106 D01 Wireless Power Transfer v04 2.2LIMITS The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) Report No.: ITA26B06001047W 002Page 5 of 12 Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Limits for Maximum Permissible Exposure (MPE) 2.3TEST SETUP 2.4TEST PROCEDURE 1)The RF exposure test was performed in anechoic chamber. 2)The measurement probe was placed at test distance (20 cm from all sides and 20 cm from the top) which is between the edge of the charger and the geometric center of probe. 3)The highest emission level was recorded and compared with limit as soon as measurement of each points (A, B, C, D, E) were completed. 4)The EUT was measured according to…

Text truncated - open the document above for the full version.

承 认 书 SPECIFICATION FOR APPROVAL 客户名称（ CUSTOM 深 圳市铁卫智能科技有限公司 客户料号（ CUSTOMER P/N ） : 品名（ DESCRIPTION) : M PP DATE:2026-4 -26 鸿日昇威科技承认签核、盖 REV.NO.:A 规格（SPECIFICATION)：G43.5开槽+磁吸线圈+20小磁片+胶5MM 0 章 部门确认/ 日期 审核/ 日期 批准/ 日期 (盖公司公 章) 品质董晚红吕惠 韦函满 工程何伟华 韦立红韦立红 备注： 深圳市铁卫智能科技有限公司 承 认 签 核、盖章 部门确认/ 日期 审核/ 日期 批准/ 日期 (盖公司公 章) 开发工 程 采购 品质 备注： 深 圳 市 鸿 日 昇 威 科 技 有 限 公 司 HRSW ELECTRONICS CO.,LTD ADD：深圳市龙华新区观澜环观中路48号1栋2楼 TEL：15112254520 FAX：+86-0755-28015170 p age:1/2 M SJLA1080MM005 2nd Floor, Building 1, No. 48, Huanguan Middle Road, Guanlan, Longhua New District, Shenzhen SPECIFICATION FOR APPROVAL 1.MECHANICAL DIMENSION (UNIT:mm) 2.SCHEMATICS: 备注：1.加20MM小磁片 2. 加背胶 ADC HEB 43.5±0.55±20.8±0.052.0MAX2±120.5±0.3 3.WINDING ： STE P START-FINISHWIRE TYPETURNSTAPE REMAR K N1S-F 热风线⌀ 0.08*65mm 2UEW11TS (Ref) 4.ELECTRICAL SPECIFICATION: ITEM LDCR温度HI-POT TES T CON 线圈加磁片 S-F常规状态 100KHz,0.25V AT 25°C SPEC 8.0uH±10% 58mΩ Max 80°C 5.BILF OF MATERIAL： NO.ITEMMATERIAL SPECIFICATIONMANUFACTURER SGS NO. 1 热风线热风线 0.08*65 股 NANJINGJINNINGCO,LTD 2 无铅锡条无铅锡条 QIAODO 3 磁片 ⌀ 42.5*0.8 锰锌硬磁片开 L 槽 TAIYI CO.,LTD 4 胶水 黄胶 9999LIANCHENG CO.,LTD 5 高温胶纸 8mm 宽高温胶纸 CUDAK CO.,LTD HRSW ELECTRONICS CO.,LTD PART NO TITLE G42.5开槽+磁吸线圈+小磁片+胶 5MM DRAWN BYCHECKED BY APPROVED BY 何伟华韦立红韦立红 page:2/2

QWCX-23-109 Test Report issued under the responsibility of: Itestek Testing Co., Ltd. (Dongguan) FCC TEST REPORT Report number ............................:ITA26B06001047W 001 Test date ......................................:2026-06-10 to 2026-07-17 Issue date ....................................:2026-07-17 Total number of pages ...............:21 Standard/according to ...............:FCC CFR Title 47 Part15 Subpart C ANSI C63.10-2020 + Cor. 1-2023+C63.10a-2024 + Errata to C63.10a- 2024 Testing laboratory.......................:Itestek Testing Co., Ltd. (Dongguan) Address........................................:Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China Template version ........................:V2.0 Tested by .....................................:Tom Zhang Checked by..................................:Oliver Qiao Approved by ................................:Rock Huang Applicant’s name ........................:Shenzhen Autige Technology Co., Ltd Address........................................:3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Manufacturer’s name..................:Shenzhen Autige Technology Co., Ltd Address........................................:3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Factory’s name............................:Shenzhen Autige Technology Co., Ltd Address........................................:3rd Floor, Building A, Zhaofeng Industrial Zone, No. 3 Hangkong Road, Hangcheng Street, Baoan District, 518126, Shenzhen, China Trade mark...................................:N/A Product description ....................:25W Magnetic Wireless Charger Model/Type reference .................:W76A, W76B, W76C Ratings.........................................:Input: 5Vdc 3A, 9Vdc 3A, 12Vdc 3A, 15Vdc 3A PPS: 5V-21Vdc, 2A Wireless charging output: 5W, 7.5W, 10W, 15W, 25W FCC ID ..........................................:2A5UA-W76C Test result....................................:Pass Report No.ITA26B06001047W 001Page 2 of 21 Itestek Testing Co., Ltd. (Dongguan)QuanWei Testing Technology (Dongguan) Co., Ltd Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, Chinaei Lane 4, Xiaobian, Changan Town Dongguan City, Guangdong, China 1. VERSION Revision History of Report Report No.VersionDescriptionIssue Date ITA26B06001047W 001Rev.01Initial report2026-07-01 Report No.ITA26B06001047W 001Page 3 of 21 Itestek Testing Co., Ltd.QuanWei Testing Technology (Dongguan) Co., Ltd Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, Chinaei Lane 4, Xiaobian, Changan Town Dongguan City, Guangdong, China We Declare: 1. This report shall not be partially reproduced without the consent of the laboratory. 2. If the report without tester's signature, auditor's signature, approver's signature and inspection seal, the report is invalid. 3. The test results are valid only for the tested samples. 4. After test and evaluation, our opinion is that the equipment provided for test compliance with the requirement of the above FCC standards. Testing laboratory: Itestek Testing Co., Ltd. (Dongguan) Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, China FCC designation number CN1436 A2LA has accredited, certificate Number 7609.01 2. SUMMARY OF TEST RESULTS RequirementCFR47 SectionResult Antenna requirement§15.203PASS AC Power Line Conducted Emission §15.207PASS Spurious Emission§15.209PASS Occupied Bandwidth§15.215(c)PASS Report No.ITA26B06001047W 001Page 4 of 21 Itestek Testing Co., Ltd. (Dongguan)QuanWei Testing Technology (Dongguan) Co., Ltd Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei, Fuhai Subdistrict, Bao’an District, Shenzhen, Guangdong, Chinaei Lane 4, Xiaobian, Changan Town Dongguan City, Guangdong, China 3. GENERAL TEST INFORMATION 3.1DESCRIPTION OF EUT Details of technical specification refer to the description in follows: Product:25W Magnetic Wireless Charger Model Number:W76C Additional Model:W76A, W76B Different:All models are identical, except model name. Frequency Range:110.1kHz-205kHz, 360kHz Modulation Technique: ASK Antenna Type:Coil Antenna Antenna Gain:0 dBi Temperature Range:-20°C ~ +35°C Hardware version:V1.0 Software version:V1.0 Report No.ITA26B06001047W 001Page 5 of 21 Itestek Testing Co., Ltd.QuanWei Testing Technology (Dongguan) Co., Ltd Floor 6, Building 3, Innovation Port of Hanyuwan, Liyuan Road, Tangwei Community, Fuhai Street, Bao’an District, Shenzhen, Guangdong, Chinaei Lane 4, Xiaobian, Changan Town Dongguan City, Guangdong, China 3.2BLOCK DIAGRAM EUT CONFIGURATION FOR TEST NumberModes 1Wireless charging 2-- 3.3TEST ENVIRONMENT CONDITIONS During the measurement the environmental conditions were within the listed ranges: Temperature range:15-35 °C Humidity range:30-75 % Pressure range:86-106 kPa 3.4TEST ENVIRONMENT CONDITIONS Device TypeManufacturerModel NameSerial No.Data Cable Power Cable LoadItestekRV V3.1------ Power supplyAutigePD power 45W------ 3.5MEASUREMENT UNCERTAINTY Test ItemUncertainty Uncertainty for Conduction emission test3.30 dB 4.12 dB (Polarize: V) Uncertainty for Radiation Emission test for 30MHz to 1GHz 4.54 dB (Polarize: H) 4.11 dB (Polarize: V) Uncertainty for Radiation Emission test for 9KHz to 30Mhz 4.15 dB (Pol…

Text truncated - open the document above for the full version.