2A68EJX-UAM022UAM022

Uascent Technology Co., Ltd www.uascent-iot.com 1 Office: 7th Floor,Building A2,Chuangzhi Yuncheng,Liuxian Avenue,Xili Community, Nanshan District, Shenzhen, China TEL: +86-755-8257-1152 E-MAIL: [email protected] Website: www.uascent-iot.com UAM022 Wi-Fi Single-band 1T1R 802.11b/g/n Module Datasheet Uascent Technology Co., Ltd Universal Ascent Holdings Limited Uascent Technology Co., Ltd www.uascent-iot.com UAM022 2 Revision History. Version Date Revision Content Draft Approved 1.0 2023/03/10 New version - Uascent Uascent Technology Co., Ltd www.uascent-iot.com UAM022 3 CONTENTS 1 Overview. ................................................................................................................................. 4 1.1 Introduction. ........................................................................................................................ 4 1.2 Features. ............................................................................................................................. 4 1.3 Model General Specification. .............................................................................................. 5 1.4 Recommended Operating Rating. ....................................................................................... 5 1.5 Reference power consumption for conventional continuous operation. ............................... 5 1.6 System Power Consumption. .............................................................................................. 5 1.7 ESD Specifications .............................................................................................................. 6 2 WiFi &BLE Specification. ......................................................................................................... 6 3 Pin Descriptions. ...................................................................................................................... 8 3.1 Pin Outline. ......................................................................................................................... 8 3.2 Pin Definition. ...................................................................................................................... 8 4 Dimensions. ............................................................................................................................. 9 4.1 Module Picture. ................................................................................................................... 9 4.2 Module Physical Dimensions. ............................................................................................. 9 4.3 PCB Layout Reference. .................................................................................................... 10 5 Production Guide. .................................................................................................................. 11 5.1 Antenna type. .................................................................................................................... 11 5.2 Module layout considerations. ........................................................................................... 11 6 Environmental Requirements. ................................................................................................ 12 6.1 Recommended Reflow Profile. .......................................................................................... 12 6.2 Patch Wi-Fi modules installed before the notice. ............................................................... 13 6.3 Humidity sensitive control. ................................................................................................. 13 7 Package style......................................................................................................................... 15 7.1 Reel. ................................................................................................................................. 15 7.1.1 Packaging Detail. ........................................................................................................... 15 8 Purchase Packaging Information. .......................................................................................... 16 9 Disclaimer and copyright notice. ............................................................................................ 17 10 Attention. .............................................................................................................................. 17 11 FCC statements: .................................................................................................................. 17 UAM022 Uascent Technology Co., Ltd 4 www.uascent-iot.com 1 Overview. 1.1 Introduction. UAM022 is a wireless Wi-Fi + Bluetooth BLE module, and support WiFi and Bluetooth BLE working at the same time. Support for independent operation or communicates with peripherals through the SPI/I2C/GPIO/PWM/UART/ADC/IRDA interface. The module works in the 2.4GHz band and supports 802.11b/g/n wireless standard. The module adopts 3.3V single power supply and SMT installation mode, which can be flexibly applied to all kinds of consumer products to meet customer needs to the greatest extent. This WLAN Module design is based on BEKEN BL2028N. It is a highly integrated single- chip Wireless network interface controller complying with the IEEE 802.11b/g/n specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip. It is designed to provide excellent performance with low power Consumption and enhance the advantages of robust system and cost-effective. This compact module is a total solution for Wi-Fi technology. The module is specifically developed for Smart phones and Portable devices. 1.2 Features.  Operate at ISM frequency bands (2.4GHz).  Standard IEEE 802.11b/g/n.  Support WiFi+Bluetooth 5.1.  Support Wi-Fi and BLE coexist.  Support BLE assists in fast Wi-Fi connection.  Built-in low-power 32-bit MCU speed up to 120 MHz, can be used as an application pro…

Text truncated - open the document above for the full version.

Shenzhen Uascent Technology Co.,Ltd FCC Modular Approval Request Rev 2.1 Modular Transmitter Approval Request Federal Communications Commission Equipment Authorization Division 7435 Oakland Mills Road Columbia, MD 21046 USA Company name: Shenzhen Uascent Technology Co.,Ltd FCC ID: 2A68EJX-UAM022 Dear Sir/Madam, In accordance with 47CFR 15.212 Modular Transmitters and KDB 996369 D01 ‘Module Equip Auth Guide v02’. FCC ID 2A68EJX-UAM022 has been examined against the following requirements. Requirement per 15.212 and KDB 996369 D01 Explanation from Grantee (do not write yes/no, but explain why product complies/how it is achieved) The radio elements must have the radio frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly. Y. Module have the radio frequency circuitry shielded The module must have buffered modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal. Y. Module have buffered modulation/data The module must contain power supply regulation on the module. Y. Contain power supply regulation on the module. DC 3.3V The module must contain a permanently attached antenna, or contain a unique antenna connector, and be marketed and operated only with specific antenna(s), per §§ 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b). Y. The module contain a PCB antenna The module must demonstrate compliance in a stand-alone configuration. Y. The module test in a stand-alone configuration The module must be labeled with its permanently affixed FCC ID label, or use an electronic display (see KDB Publication 784748). Y. FCC ID: 2A68EJX-UAM022 The module must comply with all specific rules applicable to the transmitter, including all the conditions provided in the integration instructions by the grantee. Y. The module must comply with RF exposure requirements Y. See RF exposure evaluation. Name: Tang Xinran Date: 2023-03-27 Title: CEO Assistant Signature of applicant:

Shenzhen Uascent Technology Co.,Ltd Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 2023/03/17 SUBJECT: FCC Application for (FCC ID: 2A68EJX-UAM022) To Whom It May Concern: We, the undersigned, hereby authorize _ CCIC Southern Testing Co., Ltd.___ at _ Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China _ on our behalf, to apply to the Federal Communications Commission on our equipment. Any and all acts carried out by __Chris You__ on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Signature： Contact Person: Tang Xinran Title: CEO Assistant Company: Shenzhen Uascent Technology Co.,Ltd Address: 7th Floor, Building A2, Chuangzhiyuncheng, Liuxian Avenue, Xili Community, Xili, Shenzhen, China. Tel: +86 17520063016 E-Mail: [email protected]

WIFI/BT/BLE ANT

Report No. : 20230217G1196X-W4 CCIC-SET/ TRF:IRF(2019-05-23) Page 1 of 8 RF MPE REPORT Report No.: 20230217G1196X-W4 Product Name: UAM022 Model No.: UAM022 FCC ID: 2A68EJX-UAM022 Applicant: Shenzhen Uascent Technology Co.,Ltd Address: 7th Floor, Building A2, Chuangzhiyuncheng, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen Dates of Testing: 2023.03.02-2023.03.20 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel：86 755 26627338 Fax：86 755 26627238 This test report consists of 8 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within 15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No. : 20230217G1196X-W4 CCIC-SET/ TRF:IRF(2019-05-23) Page 2 of 8 Test Report Product ................................. : UAM022 Brand Name .......................... : Uascent Trade Name ......................... : Uascent Applicant ............................... : Shenzhen Uascent Technology Co.,Ltd Applicant Address ............... : 7th Floor, Building A2, Chuangzhiyuncheng, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen Manufacturer ........................ : ShengXianZhiKongCo.,Ltd Manufacturer Address ......... : Room 804, one of No.9 Yucheng Road, Chang'an Town, Dongguan City, Guangdong Province Test Standards ..................... : 47 CFR Part 2.1091 Test Result ............................ : Pass Tested by ............................. : 2023.03.28 Kim Li, Test Engineer Reviewed by ......................... : 2023.03.28 Chris You, Senior Engineer Approved by ......................... : 2023.03.28 Yang Fan, Manager Report No. : 20230217G1196X-W4 CCIC-SET/ TRF:IRF(2019-05-23) Page 3 of 8 Table of Contents 1. GENERAL INFORMATION .................................................................................................... 5 1.1. EUT Description ....................................................................................................................... 5 1.2. EUT Description ....................................................................................................................... 6 1.3. Laboratory Facilities ................................................................................................................. 6 1.4. Laboratory Location .................................................................................................................. 6 2. TECHNICAL REQUIREMENTS SPECIFICATION IN CFR TITLE 47 PART 2.1091.... 7 2.1. Exposure Limits ........................................................................................................................ 7 2.2. Predication of MPE limit at a given distance ............................................................................ 7 2.3. Evaluation Results..................................................................................................................... 8 2.4. Conclusion ................................................................................................................................ 8 Report No. : 20230217G1196X-W4 CCIC-SET/ TRF:IRF(2019-05-23) Page 4 of 8 Change History Issue Date Reason for change 1.0 2023.03.28 First edition Report No. : 20230217G1196X-W4 CCIC-SET/ TRF:IRF(2019-05-23) Page 5 of 8 1. GENERAL INFORMATION 1.1. EUT Description Product Name UAM022 Hardware Version V1.0 Software Version V1.0.6 EUT supports Radios application 2.4G WIFI/BLE Frequency Range(Tx) BLE: 2.402GHz ~ 2.480GHz 2.4G WIFI: 2.412GHz ~ 2.462GHz Bandwidth BLE: 1Mbps 2.4G WIFI: 802.11b/g/n-HT20: 20MHz 802.11n-HT40: 40MHz Modulation Type BLE: GFSK 2.4G WIFI: DSSS (802.11b), OFDM (802.11g/n) Antenna gain BLE: -1.3dBi 2.4G WIFI: -1.3dBi Antenna Type PCB Antenna Report No. : 20230217G1196X-W4 CCIC-SET/ TRF:IRF(2019-05-23) Page 6 of 8 1.2. EUT Description EUT has been tested according to the following standards. No. Identity Document Title 1 47 CFR Part 1 Practice and Procedure 2 47 CFR Part 2 Frequency Allocations and Radio Treaty Matters; General Rules and Regulations 3 KDB 447498 D01 General RF Exposure Guidance v06 RF Exposure Procedures and Equipment Authorization Policies for Mobile and Portable Devices 4 OET Bulletin 65 Edition 97-01 Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields 1.3. Laboratory Facilities FCC-Registration No.: 406086 CCIC Southern Testing Co., Ltd EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files. Designation Number: CN1283, valid time is until April 19th, 2023. ISED Registration: 11185A-1 CCIC Southern Testing Co., Ltd. EMC Laboratory has been registered by Certification and Engineering Bureau of Industry Canada for the performance of radiated measurements with Registration No. 11185A-1 on Aug. 04, 2016, valid time is until Jun. 30th, 2023. A2LA Code: 5721.01 CCIC-SET is a third party testing organization accredited by A2LA according to ISO/IEC 17025. The accreditation certificate number is 5721.01. 1.4. Laboratory Location Company Name: CCIC Southern Testing Co., Ltd. Address: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China Report No. : 20230217G1196X-W4 CCIC-SET/ TRF:IRF(2019-05-23) Page 7 of 8 2. Technical Requirements Specification in CFR Title 47 Part 2.1091 2.1. Exposure Limit…

Text truncated - open the document above for the full version.

Report No.: 20230217G01196X-W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page1 of16 EMC TEST REPORT Report No.: 20230217G01196X-E Product Name: UAM022 FCC ID: 2A68EJX-UAM022 Model No. : IVF-BT11 Applicant: Shenzhen Uascent Technology Co.,Ltd Address: 7th Floor, Building A2, Chuangzhiyuncheng, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen Received Date: 2023.03.01 Dates of Testing: 2023.03.01—2023.03.16 Issued by: CCIC Southern Testing Co., Ltd. Lab Location: Electronic Testing Building, No. 43 Shahe Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China. Tel: 86 755 26627338 Fax: 86 755 26627238 This test report consists of16 pages in total. It may be duplicated completely for legal use with the approval of the applicant. It should not be reproduced except in full, without the written approval of our laboratory. The client should not use it to claim product endorsement by CCIC-SET. The test results in the report only apply to the tested sample. The test report shall be invalid without all the signatures of testing engineers, reviewer and approver. Any objections must be raised to CCIC-SET within15 days since the date when the report is received. It will not be taken into consideration beyond this limit. Report No.: 20230217G01196X-W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page2 of16 Test Report Product Name ....................... : UAM022 Model No. ............................ : UAM022 Trade name Uascent BrandName Uascent Applicant ............................... : Shenzhen Uascent Technology Co.,Ltd Applicant Address................ : 7th Floor, Building A2, Chuangzhiyuncheng, Liuxian Avenue, Xili Community, Xili Street, Nanshan District, Shenzhen Manufacturer ........................ : ShengXianZhiKongCo.,Ltd Manufacturer Address ......... : Room 804, one of No.9 Yucheng Road, Chang'an Town, Dongguan City, Guangdong Province Test Standards ...................... : 47 CFR Part 15 SubpartB Test Result ............................ : PASS Tested by ............................. : Ruihong Xie Test Engineer 2023.03.16 Reviewed by ......................... : Chris You Senior Engineer2023.03.16 Approved by ......................... : 2023.03.16 Hou Tao, Manager Report No.: 20230217G01196X-W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page3 of16 TABLE OF CONTENTS 1. GENERAL INFORMATION .................................................................................................... 4 1.1 EUT Description ......................................................................................................................... 4 1.2 Test Standards and Results ........................................................................................................ 5 Facilities and Accreditations ................................................................................................................ 6 1.2.1 Facilities .................................................................................................................................... 6 1.2.2 Test Environment Conditions .................................................................................................... 6 1.2.3 Measurement Uncertainty ......................................................................................................... 6 2. TEST CONDITIONS SETTING .............................................................................................. 7 2.1 Test Peripherals .......................................................................................................................... 7 2.2 Test Mode .................................................................................................................................... 7 2.3 Test Setup and Equipments List ................................................................................................ 8 2.3.1 Radiated Emission ..................................................................................................................... 8 3. 47 CFR PART 15B REQUIREMENTS .................................................................................. 10 3.1 Conducted Emission ................................................................................................................. 10 3.1.1 Requirement ............................................................................................................................ 10 3.1.2 Test Result ............................................................................................................................... 10 3.2 Radiated Emission .................................................................................................................... 11 3.2.1 Requirement ............................................................................................................................ 11 3.2.2 Test Description ...................................................................................................................... 12 3.2.3 Test Result ............................................................................................................................... 12 Change History Issue Date Reason for change 1.0 2023.03.16 First edition Report No.: 20230217G01196X-W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page4 of16 1. GENERAL INFORMATION 1.1 EUT Description EUT Name .......................... .: UAM022 Trade Name.....................: Uascent Brand Name.....................: Uascent Hardware Version............. : V1.0 Software Version .................. : V1.0.6 Note1:The EUT isa UAM022; Note2 :Fora moredetaileddescription, pleaserefer to Specification or User’s Manual supplied by the applicant and/ormanufacturer. Report No.: 20230217G01196X-W1 CCIC-SET/TRF: GJ-EMC-E (2020-01-09) Page5 of16 1.2 Test Standards and Results The objective of the report is to perform testing according to 47 CFR Part 15 SubpartB: No. Identity Document Title 1 47 CFR Part 15 Subpart B Radio Frequency Devices Test detailed items/section required…

Text truncated - open the document above for the full version.

1.AntennaSpecification ItemSpecification WorkingFrequencyRange2.4-2.5GHz MaxPKGain 2400MHz:-2.0 dBi 2450MHz:-1.3 dBi 2500MHz:-2.2 dBi VSWR2.0Max PolarizationLinear TypePCB Impedance50Ω Phi=0 Phi=90 Theta=90