2A6IY-5918Wireless Data Terminal

1 User Guide 2 Power button Press in a second： Light up the screen and lock the screen. Press in seconds： In the Power off state, boot with long press 2-3 seconds； In the use state, press and hold for 2-3 seconds to select shutdown or restart. In the dead state, press and hold down the side key - key + key power button one by one, and the device will restart for 10 seconds. Volume Volume up and down (this button can be set as a quick scan button, need application support). Printer Used to print receipts in the power on state. return key 3 Click to return to the previous screen. Home screen key Tap to quickly return to the home screen. Menu key Click to quickly view the program running in the background; select the application and swipe to close the app. TYPEC interface Can be used to charge the device and debug the developer. 4 Camera Can be used for QR code scanning and photographing. Flash Light Illuminate the surroundings while assisting in taking pictures. Scanner Support 1D code scan(optional), 2D (QR) code scan(optional), software support is required. SIM card slot Note: When inserting or removing the SIM card, be sure to make the machine in the off state. If it is plugged in or unplugged, it may cause the machine to malfunction. · Pan open the SIM card cover; · Insert/remove the SIM card in the direction shown; · Close the back cover in the translation direction and tighten the back cover screws. 5 Print instructions This machine supports 58mm thermal printing paper with the specification of 57±0.5mm*Ø40mm · Please open the paper tray by opening the lid (the top of the machine, as shown in Figure ①②). Do not open the paper bin forcibly to prevent the gear head gear from being worn. · According to the direction shown, put the paper into the paper bin correctly, and pull out some paper to the outside of the paper cutter (as shown in Figure ③); · Press firmly on the middle of the flip cover, cover the paper compartment cover, and the paper is installed (Figure ④). note: 1. If the print content is blank, check if the direction of the paper roll is reversed; 2. For the selection of thermal paper, please refer to the certified manufacturer of the company; 3. The flip cover is not fastened, which may result in failure to print properly; Charging and battery description This unit only supports TypeC cable charging. · Plug the 5V adapter into the mains outlet; · Connect the USB cable to the machine's USB interface to charge the machine; · Charging while the power is on, the battery icon at the top of the screen will change to the charging icon; · Charging is in the off state, it will enter the charging mode, and the charging icon will be displayed in the middle of the screen; 6 · If the charging icon does not appear, check if the USB interface is plugged in. Battery Description / Precautions · This machine is equipped with a 8.4V large capacity lithium battery. Do not disassemble by yourself. · To protect the battery life, it is recommended to charge it regularly. Do not wait until the used up. Minimalist setting Turn on smart business equipment in few steps ①3G/4G Set, in the off state, insert the corresponding 3G/4G card, and then turn it on. (Please read the technical specification sheet for card support details) ②Press and hold the power button for 2-3 seconds, the screen will light up, enter the first boot interface, and follow the prompts. This machine can choose 2 internet modes. ①WIFI setting ·Click the [Settings] button, then turn on the WLAN, enter the WALN search interface and wait for it to search and list the available WALN hotspots; Click on the WLAN you want to connect to. If you choose an encrypted network, you need to enter the access code to connect. ②Mobile data settings ·Pull down the system drop-down menu, click the [Mobile Data] icon, enter the mobile data settings page, and click the Open button. You can connect to the internet at this time. How to download/use the app Related applications can be in the networked mode, application installation needs to contact the company's after-sales support. Common troubleshooting The printer is not working Confirm that the paper compartment cover is properly closed; · Confirm that the appropriate paper is used and installed correctly; · Please check if there is a 58mm*40mm thermal paper roll in the paper bin; · When printing blank content, check if the paper roll is reversed. Can't open the machine (eg: the electric quantity is too low) Make sure the power button is pressed correctly for 2-3 seconds; · Charge the machine correctly into the TYPEC cable for 30 minutes; · Check if the screen shows the charging status normally. What to do when it comes to the crash Press and hold down the side key - key + key power button one by one, and the device will restart for 10 seconds. 7 Precautions safety warning Insert the AC plug into the AC outlet corresponding to the identification input on the accessory power adapter; · It is strictly forbidden to use in places where there is any potentially explosive gas; · Non-professionals should not open the power adapter at will to avoid danger; · This is a Class A product. This product may cause radio interference in a living environment. In this case, the user may be required to take practical measures for interference; ·• Do not disassemble, bump, squeeze or throw fire; If there is serious swelling, do not continue to use; Do not place the battery in a high temperature environment. Do not use the battery if it is soaked in water. There is a risk of explosion if the battery of the wrong model is replaced. Dispose of the used battery according to the instructions. Practical application environment · This product can print receipts and scan payment in the shopping mall scene · This product can be used in indoor and outdoor scenarios through GPRS network · This product can be used in indoor scenarios through WIFI network Important safety instructions The terminal is a handheld personal device like p…

Text truncated - open the document above for the full version.

Shanghai Senraise Intelligent Technology Co., Ltd. Jun.02, 2022 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2A6IY-5918 Model Number: R330P, R330C, R330CS, R350, R350S, R350P, R350PM To Whom It May Concern: We, The Shanghai Senraise Intelligent Technology Co., Ltd. hereby declare that the models are identical except the model name. Except for the different above, no other modification is performed. Sincerely, Signature: Shanghai Senraise Intelligent Technology Co., Ltd. Contact person: Li Dong

Shanghai Senraise Intelligent Technology Co., Ltd. Agent Authorization Company: Shanghai Senraise Intelligent Technology Co., Ltd. Address: Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai,China Product Name: Wireless Data Terminal Model Number(s): R330P, R330C, R330CS, R350, R350S, R350P, R350PM Product Description: Wireless Data Terminal We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2022-06-02 Name: Li Dong Company: Shanghai Senraise Intelligent Technology Co., Ltd.

Shanghai Senraise Intelligent Technology Co., Ltd. Offic e of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2022-05-31 Subject; Request for Confidentiality FCC ID: 2A6IY-5918 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely Shanghai Senra ise Intelligent Technology Co., Ltd. Contact person: Li Dong

Report No.: AGC13369220301AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC13369220301AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC13369220301AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC13369220301AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report****************************************

FCC ID Label Location 50mm&20mm FCC ID: 2A6IY-5918

Report No.: AGC13369220301AP02 Page 1 of 7 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) GSM&WCDMA &LTE Antenna Report No.: AGC13369220301AP02 Page 2 of 7 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) BT&WIFI Antenna Diversity Antenna Report No.: AGC13369220301AP02 Page 3 of 7 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC13369220301AP02 Page 4 of 7 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC13369220301AP02 Page 5 of 7 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC13369220301AP02 Page 6 of 7 BT&WIFI ANTENNA DIVERSITY ANTENNA Report No.: AGC13369220301AP02 Page 7 of 7 BATTERY OF EUT ****************************************End of Report****************************************

Page 1 of 148 SAR Test Report Report No.: AGC13369220301FH01 FCC ID : 2A6IY-5918 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Data Terminal BRAND NAME : N/A MODEL NAME : R330P, R330C, R330CS, R350, R350S, R350P, R350PM APPLICANT : Shanghai Senraise Intelligent Technology Co., Ltd. DATE OF ISSUE : May 31, 2022 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 IEC 62209-1: 2016 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC13369220301FH01 Page 2 of 148 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / May 31, 2022 Valid Initial Release Report No.: AGC13369220301FH01 Page 3 of 148 Test Report Applicant Name Shanghai Senraise Intelligent Technology Co., Ltd. Applicant Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai Manufacturer Name Shanghai Senraise Intelligent Technology Co., Ltd. Manufacturer Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai Factory Name Shanghai Senraise Intelligent Technology Co., Ltd. Factory Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai Product Designation Wireless Data Terminal Brand Name N/A Model Name R330P, R330C, R330CS, R350, R350S, R350P, R350PM Different Description All the models are the same, only different in model names. EUT Voltage DC7.7V by battery Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 IEC 62209-1: 2016 Test Date May 16, 2022 to May 23, 2022 Report Template AGCRT-US-4G/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Thea Huang (Project Engineer) May 23, 2022 Reviewed By Calvin Liu (Reviewer) May 31, 2022 Approved By Max Zhang (Authorized Officer) May 31, 2022 Report No.: AGC13369220301FH01 Page 4 of 148 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 4 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT DESCRIPTION......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 8 3.1. THE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................. 8 3.2. COMOSAR E-FIELD PROBE .......................................................................................................................... 9 3.3. ROBOT .......................................................................................................................................................... 9 3.4. VIDEO POSITIONING SYSTEM ........................................................................................................................ 10 3.5. DEVICE HOLDER .......................................................................................................................................... 10 3.6. SAM TWIN PHANTOM ................................................................................................................................... 11 4. SAR MEASUREMENT PROCEDURE .............................................................................................................. 12 4.1. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................................. 12 4.2. SAR MEASUREMENT PROCEDURE ................................................................................................................ 13 4.3. RF EXPOSURE CONDITIONS ......................................................................................................................... 15 5. TISSUE SIMULATING LIQUID ......................................................................................................................... 17 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID..................................................................................... 17 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................... 18 5.3. TISSUE CALIBRATION RESULT ....................................................................................................................... 19 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 22 6.1. SAR SYSTEM CHECK PROCEDURES ............................................................................................................. 22 6.2. SAR SYSTEM CHECK ................................................................................................................................... 23 7. EUT TEST POSITION ...................................................................................................................................... 25 7.1. BODY WORN POSITION ................................................................................................................................ 25 8. SAR EXPOSURE LIMITS ............................................................................................................................... 26 9. TEST FACILITY .............................................................................................................................................. 27 10. TEST EQUIPMENT LIST .............................................................................................................................. 28 11. MEASUREMENT UNCERTAINTY .......................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC13369220301FH01 Page 60 of 148 13.1.3. Test Result SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 53.4 Product: Wireless Data Terminal Test Mode: GSM850 with GMSK modulation Position Mode Ch. Fr. (MHz) Power Drift (<±5%) SAR (1g) (W/kg) Max. Tune-up Power (dBm) Meas. output Power (dBm) Scaled SAR (W/kg) Limit (W/kg) SIM 1 Card Body back GPRS-3 slot 128 824.2 -0.08 0.754 25.00 24.89 0.773 1.6 Body back GPRS-3 slot 190 836.6 -0.02 0.820 25.00 24.95 0.829 1.6 Body back GPRS-3 slot 251 848.8 0.01 0.890 25.00 24.79 0.934 1.6 Body front GPRS-3 slot 190 836.6 -0.14 0.562 25.00 24.95 0.569 1.6 Edge 2(Right) GPRS-3 slot 190 836.6 0.05 0.109 25.00 24.95 0.110 1.6 Edge 3(Bottom) GPRS-3 slot 190 836.6 -0.07 0.473 25.00 24.95 0.478 1.6 Edge 4(Left) GPRS-3 slot 190 836.6 -0.09 0.286 25.00 24.95 0.289 1.6 Note: · When the 1-g Reported SAR is ≤ 0.8 W/kg, testing for low and high channel is optional. Refer to KDB 447498. ·The test separation for body back, body front and 4 Edges is 0mm of all above table. Report No.: AGC13369220301FH01 Page 61 of 148 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 56.7 Product: Wireless Data Terminal Test Mode: PCS1900 with GMSK modulation Position Mode Ch. Fr. (MHz) Power Drift (<±5%) SAR (1g) (W/kg) Max. Tune-up Power (dBm) Meas. output Power (dBm) Scaled SAR (W/kg) Limit (W/kg) SIM 1 Card Body back GPRS-3 slot 512 1850.2 -0.03 1.107 22.30 22.08 1.165 1.6 Body back GPRS-3 slot 661 1880 0.09 1.040 22.30 22.22 1.059 1.6 Body back GPRS-3 slot 810 1909.8 -0.11 1.135 22.30 21.25 1.445 1.6 Body front GPRS-3 slot 512 1850.2 -0.05 0.930 22.30 22.08 0.978 1.6 Body front GPRS-3 slot 661 1880 0.02 0.900 22.30 22.22 0.917 1.6 Body front GPRS-3 slot 810 1909.8 -0.13 0.951 22.30 21.25 1.211 1.6 Edge 2(Right) GPRS-3 slot 661 1880.0 0.06 0.313 22.30 22.22 0.319 1.6 Edge 3(Bottom) GPRS-3 slot 512 1850.2 0.14 0.792 22.30 22.08 0.833 1.6 Edge 3(Bottom) GPRS-3 slot 661 1880 -0.08 0.822 22.30 22.22 0.837 1.6 Edge 3(Bottom) GPRS-3 slot 810 1909.8 -0.17 0.888 22.30 21.25 1.131 1.6 Edge 4(Left) GPRS-3 slot 661 1880.0 0.05 0.193 22.30 22.22 0.197 1.6 Note: · When the 1-g Reported SAR is ≤ 0.8 W/kg, testing for low and high channel is optional. Refer to KDB 447498. ·The test separation for body back, body front and 4 Edges is 0mm of all above table. Report No.: AGC13369220301FH01 Page 62 of 148 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 56.7 Product: Wireless Data Terminal Test Mode: WCDMA Band II with QPSK modulation Position Mode Ch. Fr. (MHz) Power Drift (<±5%) SAR (1g) (W/kg) Max. Tune-up Power (dBm) Meas. output Power (dBm) Scaled SAR (W/kg) Limit (W/kg) Body back RMC 12.2kbps 9262 1852.4 0.11 0.667 21.70 21.32 0.728 1.6 Body back RMC 12.2kbps 9400 1880 -0.05 1.034 21.70 21.29 1.136 1.6 Body back RMC 12.2kbps 9538 1907.6 0.19 0.819 21.70 21.67 0.825 1.6 Body front RMC 12.2kbps 9262 1852.4 -0.03 0.594 21.70 21.32 0.648 1.6 Body front RMC 12.2kbps 9400 1880 0.18 0.846 21.70 21.29 0.930 1.6 Body front RMC 12.2kbps 9538 1907.6 -0.05 0.655 21.70 21.67 0.660 1.6 Edge 2(Right) RMC 12.2kbps 9400 1880 0.17 0.207 21.70 21.29 0.227 1.6 Edge 3(Bottom) RMC 12.2kbps 9400 1880 -0.06 0.627 21.70 21.29 0.689 1.6 Edge 4(Left) RMC 12.2kbps 9400 1880 0.04 0.151 21.70 21.29 0.166 1.6 Note: · When the 1-g Reported SAR is ≤ 0.8 W/kg, testing for low and high channel is optional. Refer to KDB 447498. ·The test separation for body back, body front and 4 Edges is 0mm of all above table. Report No.: AGC13369220301FH01 Page 63 of 148 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 53.4 Product: Wireless Data Terminal Test Mode: WCDMA Band V with QPSK modulation Position Mode Ch. Fr. (MHz) Power Drift (<±5%) SAR (1g) (W/kg) Max. Tune-up Power (dBm) Meas. output Power (dBm) Scaled SAR (W/kg) Limit (W/kg) Body back RMC 12.2kbps 4132 826.4 -0.09 0.970 22.30 22.26 0.979 1.6 Body back RMC 12.2kbps 4183 836.4 0.01 1.021 22.30 22.30 1.021 1.6 Body back RMC 12.2kbps 4233 846.6 -0.12 1.098 22.30 22.28 1.103 1.6 Body front RMC 12.2kbps 4183 836.4 0.04 0.575 22.30 22.30 0.575 1.6 Edge 2(Right) RMC 12.2kbps 4183 836.4 -0.17 0.087 22.30 22.30 0.087 1.6 Edge 3(Bottom) RMC 12.2kbps 4183 836.4 -0.08 0.497 22.30 22.30 0.497 1.6 Edge 4(Left) RMC 12.2kbps 4183 836.4 0.03 0.219 22.30 22.30 0.219 1.6 Note: · When the 1-g Reported SAR is ≤ 0.8 W/kg, testing for low and high channel is optional. Refer to KDB 447498. ·The test separation for body back, body front and 4 Edges is 0mm of all above table. Report No.: AGC13369220301FH01 Page 64 of 148 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 55.6 Product: Wireless Data Terminal Test Mode: LTE Band 2 BM MHz MOD Position Test Mode Ch. Freq. (MHz) Power Drift (<±5%) SAR (1g) (W/kg) Max. Tune up Power (dBm) Meas. output Power (dBm) Scaled SAR (W/kg) Limit (W/kg) UL RB Allocation UL RB START 20 QPSK Body back 1 0 18700 1860 -0.09 0.754 19.60 18.73 0.921 1.6 Body back 1 0 18900 1880 0.12 0.995 19.60 19.25 1.079 1.6 Body back 1 0 19100 1900 -0.06 0.991 19.60 18.71 1.216 1.6 Body front 1 0 18900 1880 0.05 0.681 19.60 19.25 0.738 1.6 Edge 2(Right) 1 0 18900 1880 -0.04 0.199 19.60 19.25 0.216 1.6 Edge 3(Bottom) 1 0 18900 1880 -0.10 0.572 19.60 19.25 0.620 1.6 Edge 4(Left) 1 0 18900 1880 0.03 0.172 19.60 19.25 0.186 1.6 Note: · When the 1-g Reported SAR is ≤ 0.8 W/kg, testing for low and high channel is optional. Refer to KDB 447498. ·The test separation for body back, body front and 4 Edges is 0mm of all above table. Report No.: AGC13369220301FH01 Page 65 of 148 SAR MEASUREMENT Depth of Liquid (cm):>15 Relative Humidity (%): 55.6 Product: Wireless Data Terminal Test Mode: LTE Band 4 BM MHz MOD Position Test Mode Ch. Freq. (MHz) Power Drift (<±5%) SAR (1g) (W/kg) Max. Tuneu p Power (dBm) Meas. output Power (dBm) Scaled SAR (W/kg) Limit (W/kg) UL RB Allocation UL RB START 20 QPSK Body back 1 0 20050 1720 -0.06 1.088 20.50 19.68 1.314 1.6 Body back 1 0 20175 1732.5 0.01 1.098 20.50 20.06 1.215 1.6 Body …

Text truncated - open the document above for the full version.

Report No.: AGC13369220301FH01 Page 126 of 148 Repeated SAR Test Laboratory: AGC Lab Date: May 18, 2022 GPRS 850 High- Body- Back (3up) DUT: Wireless Data Terminal; Type: R330P Communication System: GPRS-3 Slot; Communication System Band: GSM 850; Duty Cycle: 1:2.7; Conv.F=5.21; Frequency: 848.8 MHz; Medium parameters used: f = 835 MHz; σ= 0.93 mho/m; εr = 41.43; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C): 21.1, Liquid temperature (°C): 20.9 SATIMO Configuration: • Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: ELLI39 Phantom • Measurement SW: OpenSAR V4_02_35 Configuration/GPRS 850 High-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS 850 High-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan dx=8mm dy=8mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom ELLI Device Position Body Back Band GSM 850 Channels High Signal TDMA (Crest factor: 2.7) SURFACE SAR VOLUME SAR Maximum location: X=9.00, Y=-67.00 SAR Peak: 1.88 W/kg SAR 10g (W/Kg) 0.558505 SAR 1g (W/Kg) 1.050347 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 Report No.: AGC13369220301FH01 Page 127 of 148 SAR (W/Kg) 1.8890 1.0954 0.5633 0.3321 0.2327 0.1455 0.0920 3D screen shot Hot spot position Report No.: AGC13369220301FH01 Page 128 of 148 Test Laboratory: AGC Lab Date: May 16, 2022 GPRS 1900 High-Body-Back (3up) DUT: Wireless Data Terminal; Type: R330P Communication System: GPRS-3Slot; Communication System Band: PCS 1900; Duty Cycle: 1:2.7; Conv.F=4.57; Frequency: 1909.8 MHz; Medium parameters used: f = 1800 MHz; σ= 1.36 mho/m; εr =41.63; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C): 21.4, Liquid temperature (°C): 20.9 SATIMO Configuration: • Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: ELLI39 Phantom • Measurement SW: OpenSAR V4_02_35 Configuration/GPRS1900 High-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/GPRS1900 High-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan dx=8mm dy=8mm, h= 5.00 mm Zoom Scan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom ELLI Device Position Body Back Band PCS 1900 Channels High Signal TDMA (Crest factor: 2.7) SURFACE SAR VOLUME SAR Maximum location: X=-10.00, Y=-47.00 SAR Peak: 2.11 W/kg SAR 10g (W/Kg) 0.540170 SAR 1g (W/Kg) 1.120341 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR 2.1299 1.2025 0.5662 0.3110 0.1782 0.0953 0.0491 Report No.: AGC13369220301FH01 Page 129 of 148 (W/Kg) 3D screen shot Hot spot position Report No.: AGC13369220301FH01 Page 130 of 148 Test Laboratory: AGC Lab Date: May 16, 2022 WCDMA Band II Mid-Body-Towards Grounds (RMC 12.2kbps) DUT: Wireless Data Terminal; Type: R330P Communication System: UMTS; Communication System Band: Band II UTRA/FDD ;Duty Cycle:1:1; Conv.F=4.57; Frequency: 1880 MHz; Medium parameters used: f = 1800 MHz; σ=1.36 mho/m; εr =41.63; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C): 21.4, Liquid temperature (°C): 20.9 SATIMO Configuration: • Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: ELLI39 Phantom • Measurement SW: OpenSAR V4_02_35 Configuration/ WCDMA band II Mid-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA band II Mid-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5m; Area Scan dx=8mm dy=8mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom ELLI Device Position Body Back Band WCDMA band II Channels Middle Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=-10.00, Y=-50.00 SAR Peak: 1.77 W/kg SAR 10g (W/Kg) 0.481754 SAR 1g (W/Kg) 0.981500 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR 1.7686 1.0459 0.5212 0.2828 0.1555 0.0863 0.0488 Report No.: AGC13369220301FH01 Page 131 of 148 (W/Kg) 3D screen shot Hot spot position Report No.: AGC13369220301FH01 Page 132 of 148 Test Laboratory: AGC Lab Date: May 18, 2022 WCDMA Band V High-Body-Towards Grounds (RMC) DUT: Wireless Data Terminal; Type: R330P Communication System: UMTS; Communication System Band: BAND V UTRA/FDD; Duty Cycle:1: 1; Conv.F=5.21; Frequency: 846.6 MHz; Medium parameters used: f = 835MHz; σ= 0.93 mho/m; εr = 41.43; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C): 21.1, Liquid temperature (°C): 20.9 SATIMO Configuration: • Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom: ELLI39 Phantom • Measurement SW: OpenSAR V4_02_35 Configuration/ WCDMA Band V High-Body-Back/Area Scan: Measurement grid: dx=8mm, dy=8mm Configuration/ WCDMA Band V High-Body-Back/Zoom Scan: Measurement grid: dx=8mm,dy=8mm, dz=5mm; Area Scan dx=8mm dy=8mm, h= 5.00 mm ZoomScan 5x5x7,dx=8mm dy=8mm dz=5mm,Complete Phantom ELLI Device Position Body Back Band WCDMA Band V Channels High Signal CDMA (Crest factor: 1.0) SURFACE SAR VOLUME SAR Maximum location: X=10.00, Y=-62.00 SAR Peak: 1.92 W/kg SAR 10g (W/Kg) 0.572026 SAR 1g (W/Kg) 1.102192 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 Report No.: AGC13369220301FH01 Page 133 of 148 SAR (W/Kg) 1.9049 1.1625 0.6196 0.3634 0.2253 0.1452 0.0949 3D screen shot Hot spot position Report No.: AGC13369220301FH01 Page 134 of 148 Test Laboratory: AGC Lab Date: May 17, 2022 LTE Band 2 Mid-Body-Back (1 RB#0) DUT: Wireless Data Terminal; Type: R330P Communication System: LTE; Communication System Band: LTE Band 2; Duty Cycle:1:1; Conv.F=4.57; Frequency:1880MHz; Medium parameters used: f = 1800 MHz; σ= 1.43 mho/m; εr =40.21; ρ= 1000 kg/m³ ; Phantom section: Flat Section Ambient temperature (°C): 21.2, Liquid temperature (°C): 21.0 SATIMO Configuration: • Probe: SSE5; Calibrated: Aug. 17, 2021; Serial No.: SN 24/20 EP336 • Sensor-Surface: 4mm (Mechanical Surface Detection) • Phantom…

Text truncated - open the document above for the full version.

CALIBRATION DATA PROBE CALIBRATION DATA DIPOLE CALIBRATION DATA

Page 1 of 44 FCC Test Report Report No.: AGC13369220301FE04 FCC ID : 2A6IY-5918 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Data Terminal BRAND NAME : N/A MODEL NAME : R330P, R330C, R330CS, R350, R350S, R350P, R350PM APPLICANT : Shanghai Senraise Intelligent Technology Co., Ltd. DATE OF ISSUE : May. 19, 2022 STANDARD(S) : FCC Part 15.247 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13369220301FE04 Page 2 of 44 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / May. 19, 2022 Valid Initial Release Report No.: AGC13369220301FE04 Page 3 of 44 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS ....................................................................................…

Text truncated - open the document above for the full version.