2A6IY-H10Wireless Data Terminal

1 User Guide 2 Power button Short press: wake up the screen，lock the screen. Long press: long press for 2-3 seconds in power off mode to switch on the device. Long press for 2-3 seconds in normal operation mode to select power off or reboot. Long press for 12 seconds when system is frozen for automatic reboot. Volume button Adjust the volume size (the volume "+" key can be set to the quick scan code key, requiring application support). Printer For printing documents in the boot state. Return key Click back to the previous screen. 3 Home Screen Keys Click to quickly get back to the home screen. Menu key Click to quickly view the program running in the background; select the application and swipe to close the application. Type-C Interface For device recharging and developer debugging Camera It can be used for one 1D/2D code scanning and taking photos. Flash lamp Light your surroundings when taking pictures. Professional 2D scanner (optional) 4 Support 1D&2D barcode scanning ，software support.。 Nano SIM Micro PSAM Micro SD Note: To prevent system errors, please make sure the device is turned off when you insert or remove the SIM card.· Remove the battery cover and remove the battery; · Insert / remove the SIM / PSAM / SD card in the direction shown in the drawing; · Install batteries and close the battery cover; 5 Print instructions This machine supports 58mm thermal printing paper with 57±0.5mm * Ø 40mm · Please open the printing paper bin (①② at the top of the machine, as shown in the drawing). Do not forcibly open the paper chamber to prevent the wear of the printing head gear; · Put the printed paper into the paper bin correctly in the direction shown in the drawing, and pull out part of the paper to the paper knife (as shown in ③); · Press the middle of the clamshell, cover the paper compartment, and install the printing paper (④). pay attention to: 1. If the print content is blank, please check whether the direction of the paper roll is reversed; 2. For the selection of thermal paper, please refer to the company certification manufacturers; 3. The flap is not buckled, easy to lead to the normal printing; Charging and battery instructions This machine only supports USB, line charging · Insert the 5V adapter into the city power socket; · Plug in the Type-C USB cable to charge the machine; · Charging in the boot state, and the battery icon at the top of the screen will become the charging icon; · In the shutdown state, the charging mode will enter the charging mode, and the charging icon is displayed in the middle of the screen; · If no charging icon appears, please check if the interface is inserted. Battery Description / Precautions · In order to protect the service life of the battery, it is recommended to charge at any time, do not wait until the battery is exhausted. · If the battery is found to have a bulge / deformation / odor, please stop charging and contact the after-sales window 6 Minimalist settings Turn on smart business devices in just a few steps ① 3G / 4G setting, under the shutdown state, insert the corresponding 3G / 4G card, and then turn on.(Read technical sheet for card support) ② Long press the power button for 2-3 seconds, the screen lights up, enter the first opening interface, press the guide prompt to operate. This machine can choose 2 Internet access modes. ①WIFI set up · Click the [Settings] button, then open WLAN, enter the WALN search interface and wait for the search and list the available WLAN hotspots; · Click the WLAN to connect. If you select an encrypted network, you need to enter the access password to connect. ② Mobile data settings · Pull down the system drop-down menu, click the [Mobile Data] icon, enter the Mobile Data Settings page, and click the Open button. You can now connect to the Internet. Respond to common problems The printer does not work · Confirm that the paper warehouse cover is closed correctly; · Confirm the use of appropriate printing paper and install it correctly; · When printing the blank content, please check if the paper roll is reversed. Can not open the machine (such as: equipment power is too low) · Make sure to press the power button correctly for 2-3 seconds; · Correct insert the machine into USB and charge the cable for 30 minutes; · Check whether the screen displays the charging status normally; · Long press the power button for 10s to force the power-on. Terminal crash · Open the battery cover, remove the battery, reinstall the battery, install the battery cover, and press the power button for 2~3 seconds; or long press the power button for 10s. 7 Name and content of toxic and harmful substances contained in this product are shown in the following table : It indicates that the content of toxic and harmful substances in all homogeneous materials of this part is below the limit specified in SJ/T11363-2006. : It indicates that the content of toxic and harmful substances is higher than the limit specified in SJ/T11363-2006 in at least one homogeneous material of this part; however, the the reason why the toxic substance of that part exceeds the limit is that there is no applicable material to replace it currently. For products that have reached or passed the service years for environmental protection, they should be recycled according to Measures for Control and Management of Electronic Information Products and should not be thrown away at will. FCC ID:2A6IY-H10 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. 8 Attentions Safety warning · Please insert the power adapter into the AC socket corresponding to its identification; · It is strictly prohibited in any potential explosive gas; · Non-professional personnel should not turn on the power adapter at will to avoid danger; · This is A Class A produc…

Text truncated - open the document above for the full version.

FCC Software Configuration Control Declaration Rev1.1.docx Shanghai Senraise Intelligent Technology Co., Ltd. Room 951, Zone D, floor 1, building 1 No. 58, Dijie Road, Baoshan District, Shanghai, China FCC Software Configuration Control Declaration Date: Sep. 11, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: Wireless Data Terminal / H10, H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. “All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified.” We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Li Dong Date: Sep. 11, 2023 Signature of applicant

Shanghai Senraise Intelligent Technology Co., Ltd. Room 951, Zone D, floor 1, building 1 No. 58, Dijie Road, Baoshan District, Shanghai, China Sep.14, 2023 Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject: Explanation of differences between product types FCC ID : 2A6IY-H10 Model Number: H10, H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 To Whom It May Concern: We, The Shanghai Senraise Intelligent Technology Co., Ltd. hereby declare that the models are identical except the model name. Except for the different above, no other modification is performed. Sincerely, Signature: Contact person: Li Dong

Shanghai Senraise Intelligent Technology Co., Ltd. Room 951, Zone D, floor 1, building 1 No. 58, Dijie Road, Baoshan District, Shanghai, China Agent Authorization Company: Shanghai Senraise Intelligent Technology Co., Ltd. Address: Room 951, Zone D, floor 1, building 1 No. 58, Dijie Road, Baoshan District, Shanghai, China Product Name: Wireless Data Terminal Model Number(s): H10, H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 Product Description: Wireless Data Terminal We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-09-07 Name: Li Dong Company: Shanghai Senraise Intelligent Technology Co., Ltd.

Report No.: AGC13369230801AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC13369230801AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC13369230801AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC13369230801AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 20mm&20mm FCC ID: 2A6IY-H10

Report No.: AGC13369230801AP02 Page 1 of 11 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC13369230801AP02 Page 2 of 11 BATTERY OF EUT OPEN VIEW OF EUT (FIGURE 3) Report No.: AGC13369230801AP02 Page 3 of 11 OPEN VIEW OF EUT (FIGURE 4) DIVERSITY ANTENNA Report No.: AGC13369230801AP02 Page 4 of 11 OPEN VIEW OF EUT (FIGURE 5) OPEN VIEW OF EUT (FIGURE 6) Report No.: AGC13369230801AP02 Page 5 of 11 OPEN VIEW OF EUT (FIGURE 7) WIFI ANTENNA GSM&WCDMA &LTE Antenna Diversity Antenna BT&WIFI Antenna Report No.: AGC13369230801AP02 Page 6 of 11 INTERNAL VIEW OF EUT (FIGURE 1) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC13369230801AP02 Page 7 of 11 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC13369230801AP02 Page 8 of 11 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) Report No.: AGC13369230801AP02 Page 9 of 11 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC13369230801AP02 Page 10 of 11 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) Report No.: AGC13369230801AP02 Page 11 of 11 INTERNAL VIEW OF EUT (FIGURE 10) ****************************************End of Report*************************************

Page 1 of 157 SAR Test Report Report No.: AGC13369230801FH01 FCC ID : 2A6IY-H10 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Data Terminal BRAND NAME : Senraise MODEL NAME : H10, H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 APPLICANT : Shanghai Senraise Intelligent Technology Co., Ltd. DATE OF ISSUE : Sep. 07, 2023 STANDARD(S) : IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 REPORT VERSION : V1.0 Attestation of Global Compliance(Shenzhen) Co., Ltd. Report No.: AGC13369230801FH01 Page 2 of 157 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 07, 2023 Valid Initial Release Report No.: AGC13369230801FH01 Page 3 of 157 Test Report Applicant Name Shanghai Senraise Intelligent Technology Co., Ltd. Applicant Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai, China Manufacturer Name Shanghai Senraise Intelligent Technology Co., Ltd. Manufacturer Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai, China Factory Name Shanghai Senraise Intelligent Technology Co., Ltd. Factory Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai, China Product Designation Wireless Data Terminal Brand Name Senraise Model Name H10 Series models H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 Different Description All the same except for the model name. EUT Voltage DC7.7V by battery Applicable Standard IEEE Std. 1528:2013 FCC 47 CFR Part 2§2.1093 IEEE Std C95.1 ™-2005 Date of receipt of test item Aug. 02, 2023 Test Date Aug. 08, 2023 to Aug. 28, 2023 Report Template AGCRT-US-4G/SAR (2021-04-20) Note: The results of testing in this report apply to the product/system which was tested only. Prepared By Bibo Zhang (Project Engineer) Aug. 28, 2023 Reviewed By Calvin Liu (Reviewer) Sep. 07, 2023 Approved By Max Zhang (Authorized Officer) Sep. 07, 2023 Report No.: AGC13369230801FH01 Page 4 of 157 TABLE OF CONTENTS 1. SUMMARY OF MAXIMUM SAR VALUE ......................................................................................................... 5 2. GENERAL INFORMATION ............................................................................................................................... 6 2.1. EUT DESCRIPTION......................................................................................................................................... 6 3. SAR MEASUREMENT SYSTEM ........................................................................................................................ 8 3.1. THE SATIMO SYSTEM USED FOR PERFORMING COMPLIANCE TESTS CONSISTS OF FOLLOWING ITEMS .................. 8 3.2. COMOSAR E-FIELD PROBE .......................................................................................................................... 9 3.3. ROBOT .......................................................................................................................................................... 9 3.4. VIDEO POSITIONING SYSTEM ........................................................................................................................ 10 3.5. DEVICE HOLDER .......................................................................................................................................... 10 3.6. SAM TWIN PHANTOM ................................................................................................................................... 11 4. SAR MEASUREMENT PROCEDURE .............................................................................................................. 12 4.1. SPECIFIC ABSORPTION RATE (SAR) .............................................................................................................. 12 4.2. SAR MEASUREMENT PROCEDURE ................................................................................................................ 13 4.3. RF EXPOSURE CONDITIONS ......................................................................................................................... 15 5. TISSUE SIMULATING LIQUID ......................................................................................................................... 17 5.1. THE COMPOSITION OF THE TISSUE SIMULATING LIQUID..................................................................................... 17 5.2. TISSUE DIELECTRIC PARAMETERS FOR HEAD AND BODY PHANTOMS ............................................................... 18 5.3. TISSUE CALIBRATION RESULT ....................................................................................................................... 19 6. SAR SYSTEM CHECK PROCEDURE ........................................................................................................... 21 6.1. SAR SYSTEM CHECK PROCEDURES ............................................................................................................. 21 6.2. SAR SYSTEM CHECK ................................................................................................................................... 22 7. EUT TEST POSITION ...................................................................................................................................... 24 7.1. BODY WORN POSITION ................................................................................................................................ 24 8. SAR EXPOSURE LIMITS ............................................................................................................................... 25 9. TEST FACILITY .............................................................................................................................................. 26 10. TEST EQUIPMENT LIST ............................................................................................................................…

Text truncated - open the document above for the full version.

Report No.: AGC13369230801FH01 Page 151 of 157 Z (mm) 0.00 4.00 9.00 14.00 19.00 24.00 29.00 SAR (W/Kg) 1.1140 0.7342 0.4269 0.2492 0.1467 0.0839 0.0495 3D screen shot Hot spot position Report No.: AGC13369230801FH01 Page 152 of 157 APPENDIX C. TEST SETUP PHOTOGRAPHS Body Back 10mm Body Front 10mm 10mm Report No.: AGC13369230801FH01 Page 153 of 157 Edge 1(Top) 10mm-Hotspot Mode Edge 2(Right) 10mm-Hotspot Mode Report No.: AGC13369230801FH01 Page 154 of 157 Edge 3(Bottom) 10mm-Hotspot Mode Edge 4(Left) 10mm-Hotspot Mode Report No.: AGC13369230801FH01 Page 155 of 157 DEPTH OF THE LIQUID IN THE PHANTOM—ZOOM IN Note：The position used in the measurement were according to IEEE 1528-2013 835MHz body 1800MHz body 1900MHz body 2300MHz body 2450MHz body Report No.: AGC13369230801FH01 Page 156 of 157 2600MHz body 5000MHz body Report No.: AGC13369230801FH01 Page 157 of 157 APPENDIX D. CALIBRATION DATA Refer to Attached files. ----END OF REPORT---- Conditions of Issuance of Test Reports 1. All samples and goods are accepted by the Attestation of Global Compliance (Shenzhen) Co., Ltd (the “Company”) solely for testing and reporting in accordance with the following terms and conditions. The company provides its services on the basis that such terms and conditions constitute express agreement between the company and any person, firm or company requesting its services (the “Clients”). 2. Any report issued by Company as a result of this application for testing services (the “Report”) shall be issued in confidence to the Clients and the Report will be strictly treated as such by the Company. It may not be reproduced either in its entirety or in part and it may not be used for advertising or other unauthorized purposes without the written consent of the Company. The Clients to whom the Report is issued may, however, show or send it, or a certified copy thereof prepared by the Company to its customer, supplier or other persons directly concerned. The Company will not, without the consent of the Clients, enter into any discussion or correspondence with any third party concerning the contents of the Report, unless required by the relevant governmental authorities, laws or court orders. 3.The Company shall not be called or be liable to be called to give evidence or testimony on the Report in a court of law without its prior written consent, unless required by the relevant governmental authorities, laws or court orders. 4. In the event of the improper use of the report as determined by the Company, the Company reserves the right to withdraw it, and to adopt any other additional remedies which may be appropriate. 5. Samples submitted for testing are accepted on the understanding that the Report issued cannot form the basis of, or be the instrument for, any legal action against the Company. 6. The Company will not be liable for or accept responsibility for any loss or damage however arising from the use of information contained in any of its Reports or in any communication whatsoever about its said tests or investigations. 7.Clients wishing to use the Report in court proceedings or arbitration shall inform the Company to that effect prior to submitting the sample for testing. 8. The Company is not responsible for recalling the electronic version of the original report when any revision is made to them. The Client assumes the responsibility to providing the revised version to any interested party who uses them. 9. Subject to the variable length of retention time for test data and report stored hereinto as otherwise specifically required by individual accreditation authorities, the Company will only keep the supporting test data and information of the test report for a period of six years. The data and information will be disposed of after the aforementioned retention period has elapsed. Under no circumstances shall we provide any data and information which has been disposed of after retention period. Under no circumstances shall we be liable for damage of any kind, including (but not limited to) compensatory damages, lost profits, lost data, or any form of special, incidental, indirect, consequential or punitive damages of any kind, whether based on breach of contract of warranty, tort (including negligence), product liability or otherwise, even if we are informed in advance of the possibility of such damages.

CALIBRATION DATA PROBE CALIBRATION DATA DIPOLE CALIBRATION DATA

Shenzhen Kuruijie Communication Technologies Co.,Ltd Customer:商睿 Project:H10 Antenna Test Report SHENZHEN KURUIJIE RF Engineer:安增侠 Testing Date:2023.8.3 Shenzhen Kuruijie Communication Technologies Co.,Ltd 1: Anechoic Chamber 7x4x3 m (3D) 2: Rohde & Schwarz CMW500 3: AGILENT 8960 5515C 4: Network Analyzer-AGILENT ENA5071B The Equipment of Active Test Shenzhen Kuruijie Communication Technologies Co.,Ltd 1. GPS /WIFI/ BT Printed antenna FPC picture Shenzhen Kuruijie Communication Technologies Co.,Ltd 2. Return loss Shenzhen Kuruijie Communication Technologies Co.,Ltd 3. 2D and 3D drawings Shenzhen Kuruijie Communication Technologies Co.,Ltd Shenzhen Kuruijie Communication Technologies Co.,Ltd 4. Efficiency and gain FrequencypercentageGain 157538.08%0.8 240034.55%0.92 245033.57%0.73 250034.43%1.01 510033.56%0.82 530035.44%0.85 580030.28%0.62

Page 1 of 15 FCC Test Report Report No.: AGC13369230801FR05 FCC ID : 2A6IY-H10 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Data Terminal BRAND NAME : Senraise MODEL NAME : H10, H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 APPLICANT : Shanghai Senraise Intelligent Technology Co., Ltd. DATE OF ISSUE : Sep. 05, 2023 STANDARD(S) TEST PROCEDURE(S) : FCC Part 15.407 KDB 905462 D02 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13369230801FR05 Page 2 of 15 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 05, 2023 Valid Initial Release Report No.: AGC13369230801FR05 Page 3 of 15 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY ...................................................................................... 4 2. GENERAL INFORMATION .................................................................................................. 5 3. DESCRIPTION OF TEST MODES........................................................................................ 6 4. SUMMARY OF TEST RESULTS .......................................................................................... 6 5. TEST FACILITY .................................................................................................................... 6 6. DYNAMIC FREQUENCY SELECTION (DFS) ...................................................................... 7 6.1. APPLICABILITY OF DFS REQUIREMENTS .............................................................................. 7 6.2. TEST SET-UP ............................................................................................................................ 8 6.3. LIMITS ....................................................................................................................................... 8 6.4. RADAR TEST WAVEFORMS ................................................................................................... 10 6.5. TEST PROCEDURE ................................................................................................................ 10 6.6. TEST RESULT ......................................................................................................................... 10 APPENDIX I: PHOTOGRAPHS OF TEST SETUP ................................................................. 15 APPENDIX II: PHOTOGRAPHS OF EUT ............................................................................... 15 Report No.: AGC13369230801FR05 Page 4 of 15 1. VERIFICATION OF CONFORMITY Applicant Shanghai Senraise Intelligent Technology Co., Ltd. Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai, China Manufacturer Shanghai Senraise Intelligent Technology Co., Ltd. Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai, China Factory Shanghai Senraise Intelligent Technology Co., Ltd. Address Room 951, Zone D, floor 1, building 1, No. 58, Dijie Road, Baoshan District, Shanghai, China Product Designation Wireless Data Terminal Brand Name Senraise Test Model H10 Series Model H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 Declaration of Difference All the same except for the model name Date of receipt of test item Aug. 02, 2023 Date of Test Aug. 02, 2023~Sep. 05, 2023 Deviation No any deviation from the test method Condition of Test Sample Normal Test Result Pass Report Template AGCRT-US-BGN/RF We hereby certify that: The above equipment was tested by Attestation of Global Compliance (Shenzhen) Co., Ltd. The test data, data evaluation, test procedures, and equipment configurations shown in this report were made in accordance with the procedures given in KDB 905462 D02. Prepared By Bibo Zhang (Project Engineer) Sep. 05, 2023 Reviewed By Calvin Liu (Reviewer) Sep. 05, 2023 Approved By Max Zhang Authorized Officer Sep. 05, 2023 Report No.: AGC13369230801FR05 Page 5 of 15 2. GENERAL INFORMATION The EUT is designed as “Wireless Data Terminal”. It is designed by way of utilizing the OFDM technology to achieve the system operation. Equipment Type Outdoor access points Fixed P2P access points Indoor access points Client devices Operation Frequency U-NII 1:5150MHz~5250MHz U-NII 2C:5470MHz~5725MHz U-NII 2A: 5250MHz~5350MHz U-NII 3: 5725MHz~5850MHz DFS Design Type Master Slave with radar detection Slave without radar detection TPC Function Yes No Test Frequency Range For 802.11a/n-HT20/ac-VHT20: 5180~5240MHz, 5260~5320MHz, 5745~5825MHz For 802.11n-HT40/ac-VHT40: 5190~5230MHz, 5270~5310MHz, 5755~5795MHz For 802.11ac-VHT80: 5210MHz, 5290MHz, 5775MHz Output Power IEEE 802.11a(HT20):11.19dBm; IEEE 802.11n(HT20):10.49dBm; IEEE802.11n(HT40):10.75dBm; IEEE 802.11ac(VHT20):10.66dBm; IEEE802.11ac(VHT40):10.86dBm; IEEE802.11ac(VHT80):11.11dBm; Modulation 802.11a/n:(64-QAM, 16-QAM, QPSK, BPSK) OFDM 802.11ac :(256-QAM, 64-QAM, 16-QAM, QPSK, BPSK) OFDM Data Rate 802.11a:6/9/12/18/24/36/48/54Mbps; 802.11n:up to 300Mbps; 802.11ac:up to 866.6Mbps; Number of channels 7 channels of U-NII-1 Band 7 channels of U-NII-2A Band 8 channels of U-NII-3 Band Hardware Version V2.0 Software Version H10-OS01 13.0.90 Antenna Designation PIFA antenna (Comply with requirements of the FCC part 15.203) Antenna Gain 0.85dBi Power Supply DC 7.7V by battery Note: 1. This device does not support radar monitoring. 2. The signal loading method between the client device and the Master device is TCP technology. 3. Distribution of start-up time of Master device and client device: Equipment Boot time(s) Passive device(client) 10s Active device(master) 40s Report No.: AGC13369230801FR05 Page 6 of 15 3. DESCRIPTION OF TEST MODES The tests in this section are run sequentially and the UUT must pass all tests successfully. If the UUT fails any one of the tests it will count as a failure of compliance. To show compliance, all tests must be performed with waveforms random…

Text truncated - open the document above for the full version.

Page 1 of 144 FCC Test Report Report No.: AGC13369230801FR04 FCC ID : 2A6IY-H10 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : Wireless Data Terminal BRAND NAME : Senraise MODEL NAME : H10, H10C, H10S, H10P, Hi20, V3, V7, V8, V10, Q5, Q7, Q9, Q10, z95, z96, z98, H5, H8, R330 APPLICANT : Shanghai Senraise Intelligent Technology Co., Ltd. DATE OF ISSUE : Sep. 05, 2023 STANDARD(S) : FCC Part 15 Subpart E §15.407 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC13369230801FR04 Page 2 of 144 REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / Sep. 05, 2023 Valid Initial Release Report No.: AGC13369230801FR04 Page 3 of 144 TABLE OF CONTENTS 1. VERIFICATION OF CONFORMITY .................................................................................................................. 5 2. GENERAL INFORMATION .............................................................................................................................. 6 2.1. PRODUCT DESCRIPTION ........................................................................................................................ 6 2.2. TABLE OF CARRIER FREQUENCYS....................................................................................................... 7 2.3. RELATED SUBMITTAL(S) / GRANT (S) ................................................................................................... 9 2.4. TEST METHODOLOGY ............................................................................................................................. 9 2.5. SPECIAL ACCESSORIES ......................................................................................................................... 9 2.6. EQUIPMENT MODIFICATIONS ................................................................................................................ 9 2.7. ANTENNA REQUIREMENT ..................................................................................…

Text truncated - open the document above for the full version.