2A6KK-CA10WiFi Automatic Cat Feeder

FCC warning statements: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The device has been evaluated to meet general RF exposure requirement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. IC warning statements: -English Warning Statement: RSS-GEN ISSUE 5, 8.4 User manual notice This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). -French Warning Statement: RSS - Gen version 5, 8.4 avis du manuel de l'utilisateur Cet appareil contient un émetteur / récepteur sans licence conforme au RSS sans licence d'innovation, science et développement économique Canada.L'opération doit satisfaire aux deux conditions suivantes: Cet équipement peut ne pas causer d'interférence. L' équipement doit accepter toute interférence, y compris toute interférence qui pourrait entraîner un fonctionnement indésirable de l'équipement. This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment and meets RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that are deemed to comply without testing of specifc absorption ratio (SAR).Cet équipement est conforme aux limites d’exposition aux rayonnements énoncées pour un environnement non contrôlé et respecte les règles d’exposition aux fréquences radioélectriques (RF) CNR-102 de l’IC. Cet équipement émet une énergie RF très faible qui est considérée conforme sans évaluation du débit d’absorption spécifque (DAS). This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Lors de l'installation et du fonctionnement de cet équipement, la distance minimale entre le radiateur et le corps doit être de 20cm.

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: WiFi Automatic Cat Feeder FCC ID: 2A6KK-CA10 Model(s): CA10 2.911(d)(5)(i) Equipment Type We, SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Sherry zeng Date: 6/24/2024 Title: General Manager Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. 2.911 (d)(5)(ii) Applicant Attestation v1.3 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: WiFi Automatic Cat Feeder FCC ID: 2A6KK-CA10 Model(s): CA10 2.911(d)(5)(ii) Applicant filing We, [SHENZHEN WOPET SMART TECHNOLOGY CO., LTD.] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Sherry zeng Date: 6/24/2024 Title: General Manager Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

[SHENZHEN WOPET SMART TECHNOLOGY CO., LTD.] [ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY] [XIXIANG STREET, BAOAN DISTRICT, SHENZHEN] [CHINA] Date: [June 22,2024] Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2A6KK-CA10 FRN: 0032271520 US Agent – Attestation Statement / Part 2.911(d)(7) [SHENZHEN WOPET SMART TECHNOLOGY CO., LTD.] certifies, that as of [June 22,2024], we have designated FCC US Agent, LLC to accept service of process on our behalf for FCC ID: 2A6KK-CA10. [SHENZHEN WOPET SMART TECHNOLOGY CO., LTD.], accepts to maintain an agent of service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. FCC US Agent, LLC, accepts as of the date of the filing of this application, the obligation of being the designated agent for the purpose of accepting service of process on behalf of [SHENZHEN WOPET SMART TECHNOLOGY CO., LTD.] for FCC ID: 2A6KK-CA10. Designated Agent Information: Company Name: FCC US Agent, LLC FRN: 0033402884 Address: 3722 Illinois Avenue, Saint Charles, IL, 60174, USA Contact Person: Tim Payne Phone: 708-571-3148 Email: [email protected] Sincerely, Company: [SHENZHEN WOPET SMART TECHNOLOGY CO., LTD.] Designated Agent: FCC US Agent, LLC Company Representative: [Sherry zeng] Designated Agent Representative: Tim Payne Signature: Signature: Tim Digitally signed by Tim Payne DN: cn=Tim Payne, o=FCC US Agent, LLC, ou=FCC US Agent, LLC, [email protected], c=US Date: 2024.06.23 20:32:11 -05'00' Payne

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Authorization Company name: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: WiFi Automatic Cat Feeder FCC ID: 2A6KK-CA10 Model(s): CA10 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: June 24, 2024 Name Sherry zeng Position General Manager Company Name SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Tel +86-15115879531 Fax / Email [email protected]

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Letter of Authorization Company: SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address: ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Product Name: WiFi Automatic Cat Feeder Model Number(s): CA10 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: June 24, 2024 Name Sherry zeng Position General Manager Company Name SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Tel +86-15115879531 Fax / Email [email protected]

SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Date: 2024-06-24 Subject; Request for Long Term Confidentiality FCC ID: 2A6KK-CA10 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram BOM Operational Description Tune-up Procedure It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Signature: June 24, 2024 Name Sherry zeng Position General Manager Company Name SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Tel +86-15115879531 Fax / Email [email protected]

FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10

Label Location FCC ID: 2A6KK-CA10 Product name: WiFi Automatic Cat Feeder

FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 FCC ID: 2A6KK-CA10 IC: 30008-CA10 ANT FCC ID: 2A6KK-CA10 IC: 30008-CA10

FCC ID: 2A6KK-CA10 IC: 30008-CA10 Prediction of MPE at a given distance 1. Limits The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) 2. Test Procedure Equation from page 18 of OET Bulletin 65, Edition 97-01 Where: S = power density P = power input to the antenna G = numeric gain of the antenna in the direction of interest relative to an isotropic radiator R = distance to the center of radiation of the antenna FCC ID: 2A6KK-CA10 IC: 30008-CA10 3. Result Mode Frequency (MHz) Maximum output power Prediction distance (cm) Rated Peak RF power output MPE (mW/cm 2 ) Limit (mW/cm 2 ) SAR Test Exclusion dBm mW 2.4G WiFi 2412-2462 12.783 20 13 18.98 0.0068 1 Yes 2.4G WiFi Antenna Gain: 2.54dBi, 1.79(numeric) Then SAR evaluation is not required.

ALPHA's reports is using a digital certificate that is trusted on Adobe's official server. If there is no digital certificate or the digital certificate shows damaged in your report. Please do not accept the report. E-mail: [email protected] Tel: 400-8300-895 Website: http://www.a-lab.cn FCC&IC TEST REPORT FCC ID: 2A6KK-CA10 IC: 30008-CA10 On Behalf of SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. WiFi Automatic Cat Feeder Model No.: CA10 Prepared for : SHENZHEN WOPET SMART TECHNOLOGY CO., LTD. Address : ROOM 923, BLOCK A, ECONOMIC BUILDING, HUAFENG, HEADQUARTERS NO. 288, XIXIANG AVENUE, LAODONG COMMUNITY, XIXIANG STREET, BAOAN DISTRICT, SHENZHEN CHINA Prepared By : Shenzhen Alpha Product Testing Co., Ltd. Address : Building i, No.2, Lixin Road, Fuyong Street, Bao'an District, 518103, Shenzhen, Guangdong, China Report Number : A2403122-C01-R08 Date of Receipt : April 2, 2024 Date of Test : April 2, 2024 - June 21, 2024 Date of Report : June 21, 2024 Version Number : V0 Result Pass Page 2 of 70 Report No.: A2403122-C01-R08 TABLE OF CONTENTS Description Page 1. Summary of Standards And Results -------------------------------------------------------------- 6 1.1. Description of Standards and Results ------------------------------------------------------- 6 2. General Information ------------------------------------------------------------------------------------ 7 2.1. Description of Device (EUT) ------------------------------------------------------------------- 7 2.2. Accessories of Device (EUT) ------------------------------------------------------------------ 8 2.3. Tested Supporting System Details------------------------------------------------------------ 8 2.4. Block Diagram of connection between EUT and simulators --------------------------- 8 2.5. Test Mode Description --------------------------------------------------------------------------- 9 2.6. Test Conditions ------------------------------------------------------------------------------------ 9 2.7. Test Facility --------------------------------------------------------------------------------------- 10 2.8. Measurement Uncertainty -------------------------------------------------------------------- 10 2.9. Test Equipment List----------------------------------------------------------------------------- 11 3. Spurious Emission ------------------------------------------------------------------------------------ 12 3.1. Test Limits ----------------------------------------------------------------------------------------- 12 3.2. Test Procedure ----------------------------------------------------------------------------------- 15 3.3. Test Setup ----------------------------------------------------------------------------------------- 15 3.4. Test Results--------------------------------------------------------------------------------------- 16 4. Power line Conducted Emission ----------------------------------------------------------------- 31 4.1. Test Limits ----------------------------------------------------------------------------------------- 31 4.2. Test Procedure ----------------------------------------------------------------------------------- 31 4.3. Test Setup ----------------------------------------------------------------------------------------- 31 4.4. Test Results--------------------------------------------------------------------------------------- 32 5. Conducted Maximum Output Power ------------------------------------------------------------ 34 5.1. Test limits ------------------------------------------------------------------------------------------ 34 5.2. Test Procedure ----------------------------------------------------------------------------------- 34 5.3. Test Setup ----------------------------------------------------------------------------------------- 34 5.4. Test Results--------------------------------------------------------------------------------------- 34 6. Peak Power Spectral Density --------------------------------------------------------------------- 40 6.1. Test limits ------------------------------------------------------------------------------------------ 40 6.2. Test Procedure ----------------------------------------------------------------------------------- 40 6.3. Test Setup ----------------------------------------------------------------------------------------- 40 6.4. Test Results--------------------------------------------------------------------------------------- 41 7. Bandwidth ------------------------------------------------------------------------------------------------ 46 7.1. Test limits ------------------------------------------------------------------------------------------ 46 7.2. Test Procedure ----------------------------------------------------------------------------------- 46 7.3. Test Setup ----------------------------------------------------------------------------------------- 46 7.4. Test Results--------------------------------------------------------------------------------------- 46 8. Band Edge Check ------------------------------------------------------------------------------------- 57 8.1. Test limits ------------------------------------------------------------------------------------------ 57 8.2. Test Procedure ----------------------------------------------------------------------------------- 57 8.3. Test Setup ----------------------------------------------------------------------------------------- 57 8.4. Test Results--------------------------------------------------------------------------------------- 57 9. Frequency stability ----------------------------------------------------------------------------------- 66 Page 3 of 70 Report No.: A2403122-C01-R08 9.1. Test limit ------------------------------------------------------------------------------------------- 66 9.2. Test Procedure ----------------------------------------------------------------------------------- 66 9.3. Test Setup ---------------------------------------------------------------------…

Text truncated - open the document above for the full version.

Page 63 of 70 Report No.: A2403122-C01-R08 Band Edge NVNT g 2462MHz Ant1 Ref Band Edge NVNT g 2462MHz Ant1 Emission Page 64 of 70 Report No.: A2403122-C01-R08 Band Edge NVNT n20 2412MHz Ant1 Ref Band Edge NVNT n20 2412MHz Ant1 Emission Page 65 of 70 Report No.: A2403122-C01-R08 Band Edge NVNT n20 2462MHz Ant1 Ref Band Edge NVNT n20 2462MHz Ant1 Emission Page 66 of 70 Report No.: A2403122-C01-R08 9. FREQUENCY STABILITY 9.1. Test limit Please refer section RSS-Gen. Regulation RSS-Gen If the frequency stability of the licence-exempt radio apparatus is not specified in the applicable RSS, the fundamental emissions of the radio apparatus should be kept within at least the central 80% of its permitted operating frequency band in order to minimize the possibility of out-of-band operation. In addition, its occupied bandwidth shall be entirely outside the restricted bands and the prohibited TV bands of 54-72 MHz, 76-88 MHz, 174-216 MHz, and 470-602 MHz, unless otherwise indicated. 9.2. Test Procedure The following equipment are installed on the emission measurement to meet the commission requirements and operating regulations in a manner which tends to maximize its emission characteristics in normal application. 9.3. Test Setup Temperature controller 9.4. Test Results PASS. Detailed information please see the following page. Spectrum Analyzer EUT EUT Page 67 of 70 Report No.: A2403122-C01-R08 Assigned Frequency(MHz): 2412MHz Voltage Temperature Measured Frequency (MHz) Frequency stability (MHz) Limit (MHz) Low DC 4.5V +20°C 2411.995 -0.005 ±0.020 Normal DC 5V -10°C 2411.990 -0.010 ±0.020 -5°C 2411.996 -0.004 ±0.020 0°C 2411.993 -0.007 ±0.020 +10°C 2411.987 -0.013 ±0.020 +20°C 2411.994 -0.006 ±0.020 +30°C 2411.995 -0.005 ±0.020 +40°C 2411.983 -0.017 ±0.020 +50°C 2411.995 -0.005 ±0.020 +60°C 2411.995 -0.005 ±0.020 High DC 5.5V +20°C 2411.986 -0.014 ±0.020 Note: Record data for worst case mode Page 68 of 70 Report No.: A2403122-C01-R08 10. ANTENNA REQUIREMENT 10.1.Standard Requirement An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this Section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. 10.2.Antenna Connected Construction The antenna connector is unique antenna and no consideration of replacement. Please see EUT photo for details. 10.3.Results The EUT antenna is internal Antenna. It complies with the standard requirement. Page 69 of 70 Report No.: A2403122-C01-R08 11. TEST SETUP PHOTO 11.1.Photo of Radiated Emission test Page 70 of 70 Report No.: A2403122-C01-R08 11.2.Photo of Conducted Emission test ---------END OF REPORT-------

SHANGHAI DEMAN INFORMATION TECHNOLOGY CO.,LTD. CUSTOMER NAME: 涂鸦科技 PRODUCT NAME: Ren Feng P/N: 印刷天线 Page 1 Ren Feng P/N: 印刷天线 WRITED: 汪龙 DATE:20190520 VERSIONS:A Measurement data Page 2 Frequency (MHz) 240024502500 Return Loss-8.73-11.76-11.21 VSWR 2.161.711.77 Radiation pattern Z Y Page 3 X Directivity Diagram Z Y X XY XZ Page 4 YZ Freq.（MHz）Effi(%)Gain (dBi) 2400 52.29 1.62 2410 52.17 1.71 2420 53.14 1.93 2430 54.16 1.98 Efficiency&Gain Page 5 2440 57.62 2.00 2450 59.64 2.17 2460 61.55 2.45 2470 60.64 2.38 2480 62.86 2.54 2490 59.85 2.30 2500 60.41 2.49 4mm 10mm 3.6mm 8.5mm

FCC ID: 2A6KK-CA10 IC: 30008-CA10 1.1. Photo of Radiated Emission test 1.2. Photo of Conducted Emission test