2A6PA-CR018Baby swing

Instruction Model No:CR018 Standard:ASTM F2088-22,ASTM F963-17,CPSC 16 CFR Part 1223 CPSC 16 CFR Part 1130 Company name:Zhongshan City Cironbaby Co.,Ltd. Add:No.6,Yongxing North Road,Yongxing Industrial Zone,Henglan Town,Zhongshan City,Guangdong,China Tel:+86 760 87768016 Fax:+86 760 87766225 IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE Please read the instruction of the swing carefully before using. If the swing is not operated according to the instructions, it may cause injury to the baby. Product summary 1、Home page 1 2、Introduction 2 3、Function Parts List 3 Install 4 7 ～ Panel 8 Remote 8 4、 Cleaning and maintenance 10 1 General 2 MP3 9 Bluetooth 9 5、Attention 11～12 General： Introduction Name Model No. Input voltage Out voltage Max. load capacity Standard Production date baby swing chair CR018A 100-240V～50/60Hz 0.3A DC5.8V/1A 9Kg See the package or product label WARNING 1）Power supply terminal must not short-circuit. 2）Never use the adapter provided not by the manufacturer， input voltage of adapter:100-240V ～50/60Hz/0.3A MAX,Output voltage: DC5.8V/1A. 3）When using the adapter, the adapter should be kept away from children. 4）Transformers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they shall not be used. 5)The infant swing shall only be used with the recommended transformer. 2 EN12790:2009/EN16232:2013+A1:2018 EN71-1/EN71-2/EN71-3 3 Introduction Parts List： Number A B C Name Seat Mainframe base Qty 1set 1set 1set Accessories:Instruction*1pc,Adapter*1pc, Remote controller*1pc。 B C A Canopy 4 Introudction Install details： 1）Insert the seat into mainframe base. 2）Fasten the Canopy to the seat. Push the sheet metal in and lift the seat up. Disassembly the seat： Seat installation details： 1）Keep the same direction of seat D hole and mainframe base D iron shaft,then insert the seat into mainframe base,then rotate the seat left and right slightly,then press down the seat after alignment,then finish the seat installation. 2） WARNING: After completing the installation of the seat, please pull up the seat to ensure that it is well locked before using it. Seat D hole and mainframe base D iron shaft keep the same direction Shoulder belt installation： Put baby in the seat,then fasten the seat belt,then cover the buckle bag well。 5 Introduction 6 Introduction Power supply： 1) DC plug can insert into the DC power of 100~240V,50/60Hz, 0.3A. 2) DC interface can be connected by power bank. 3) Output voltage:5.8V,electric current:1A.Never use the adapter of other specifications. 4) Never use the adapter provided not by the manufacturer. 5) Transformers used with the infant swing are to be regularly examined for damage to the cord, plug, enclosure and other parts, and in the event of such damage, they shall not be used. AC plug DC socekt DC interface 7 Introduction Battery assembly and disassembly: 1Use a Phillips screwdriver to open the battery cover 2Load 4 x AA alkaline dry batteries in the correct polarity 3) Fasten the battery cover with screws 4) non-rechargeable batteries are not to be recharged; 5) different types of batteries or new and used batteries are not to be mixed; 6) exhausted batteries are to be removed from the infant swing. CAUTION To prevent battery leaks, which can burn skin and eyes: • Always replace the entire set of batteries at one time. • Never mix old and new batteries, or batteries of different brands or types. • Remove batteries when storing product for a long time. • Dispose of used batteries immediately. Function introduction Panel func�on： Power switch Speeds adjustment Music play/pause Next tune/ volume adjustment Remote func�on： Remote receiver 8 Timing bu�on MUSIC Timer USB Musi c VOL+VOL- VOL+ Timer VOL- USB Music Power swich Vibra�on induc�on 9 Function introduction MP3 func�on： USB interface 1）Insert USB device into USB interface,then can play the music inside the USB device。 2）Pull out USB device then will play the music from the product when turn on the music bu�on。 Bluetooth func�on： 1）Turn on the bluetooth in the mobile phone to search the name of swing chair,the product will play the music inside the mobile phone a�er connect this bluetooth device. Bluetooth Turn on bluetooth Mobile phone name Search bluetooth device Paired device swing chair 10 Cleaning and maintenance The accessories of this product: toy bar, pillow, seat cloth can be cleaned with a damp cloth moistened with a flexible cleaning agent and left to air dry in a cool place 1.Never leave the child unattended. 2.Do not use this product once your child can sit up unaided or weighs more than 9 kg. 3.This product is not intended for prolonged periods of sleeping. 4.Never use this product on an elevated surface (e.g. a table). 5.Always use the restraint system. 6.Never use the toy bar to carry the reclined cradle. 7.To avoid injury ensure that children are kept away when unfolding and folding this product 8.Do not let children play with this product. 9.Do not move or lift this product with the baby inside it. 10.Maximum weight for this product: 9KG. 11.Attention to suffocation hazard: do not use on soft objects to prevent suffocation caused by overturned (e.g. bed, sofa, etc.) 12.No toys other than the two toys provided with this product may be placed on the toy bar！ 13.This product can be used for a long time. 14.This product can only be assembled or cleaned by adults. 15.This product does not replace a cot or a bed. Should your child need to sleep, then it should be placed in a suitable cot or bed. 16Do not use the product if any components are broken or missing. 17.Do not use accessories or replacement parts other than those approved by the manufacturer. 18.Never near the fire！ WARNING Warning: Changes or modifications to this unit not expressly approved by the party responsible for compli ance could void the user s authority to operate the equipment. NOTE: This device complies with part …

Text truncated - open the document above for the full version.

ZhongshanCityCironbabyCo.,Ltd. CoveredEquipmentCertificationAttestationLetter DATE FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2A6PA-CR018 ZhongshanCityCironbabyCo.,Ltd.(“theapplicant”)certifiesthattheequipmentfor whichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedby anyoftheentitiesidentifiedonthecurrentCoveredList,theapplicantshould includeanexplanationonwhytheequipmentisnot“covered”equipment. ZhongshanCityCironbabyCo.,Ltd.(“theapplicant”)certifiesthat,asofthedateofthe filingoftheapplication,theapplicantisnotidentifiedontheCoveredListasanentity producing“covered”equipment. Signed: Name:AaronChen Title:manager Company:ZhongshanCityCironbabyCo.,Ltd. Date:2024/9/4

Rev1/26/202 Zhongshan City Cironbaby Co.,Ltd. 3 MrBenXu REPAmericaLLC Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2024/09/04 Zhongshan City Cironbaby Co.,Ltd.(“the applicant”) certifies that, as of the date of the filing of the application, REP America LLC is our designated U.S. agent for service of process for the above referenced FCC ID.Zhongshan City Cironbaby Co.,Ltd.accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. REP America LLC accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name: REP America LLC U. S. Agent FRN: 0034192500 Address: REP America LLC,1942 Broadway St. STE 314C Boulder, CO 80302 United States Contact Person: Mr Ben Xu Tel.: (719) 201-3314 Email: [email protected] Sincerely, [U.S.Agentsignature Aaron Chen Zhongshan City Cironbaby Co.,Ltd. [Insert Applicant signature] ] Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID or Grantee Code:FCC ID:2A6PA-CR018 Applicant FRN:0032331803

DATE:2024/9/4 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 AuthoritytoActasAgent Onourbehalf,IappointShenzhenDACETestingTechnologyCo.,Ltd.Address:102 BuildingH1&1/F.,BuildingH,HongfaScience&TechnologyPark,Tangtou,Shiyan, Bao’anDistrict,Shenzhen,Guangdong,Chinatoactasouragentinthepreparationofthis applicationforequipmentcertification.Icertifythatsubmitteddocumentsproperlydescribe thedeviceorsystemforwhichequipmentcertificationissought.Ialsocertifythateach unitmanufactured,importedormarketed,asdefinedintheFederalCommunications Commission’sregulationswillhaveaffixedtoitalabelidenticaltothatsubmittedfor approvalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonour behalf,Iacknowledgethatallresponsibilityforcomplyingwiththetermsandconditionsfor certification,stillresideswithZhongshanCityCironbabyCo.,Ltd. Address:No.6,YongxingNorthRoad,YongxingIndustrialZone,HenglanTownZhongshan City,Guangdong(ApplicantNameandaddress) <Signature> Name:AaronChen Title:manager Company:ZhongshanCityCironbabyCo.,Ltd.

FCCID:2A6PA-CR018 ZhongshanCityCironbabyCo.,Ltd. ModelConfirmationLetter We,ZhongshanCityCironbabyCo.,Ltd.certifytheproduct:Babyswing,Model No.:CR018,CR018A，CR018B，CR018C，CR018D，CR018F,Theproducthasmanymodels, onlythemodelnameisdifferent,andtheotherpartssuchasthecircuitprinciple, pcbandelectricalstructurearethesame.Testsamplemodel:CR018 <Signature> Name:AaronChen Title:manager Company:ZhongshanCityCironbabyCo.,Ltd. Date:2024/9/4

(Listherethedocumentsforwhichyouareseekingconfidentiality–forexample...) Schematics Blockdiagram  Operationdescription Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. <Signature> Name:AaronChen Title:manager Company:ZhongshanCityCironbabyCo.,Ltd. DATE:2024/9/4 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills RoadColumbia, MD 21046 FCC ID:2A6PA-CR018 Product Name:Baby swing Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission’s rules, we hereby request that the following documents be held confidential:

FCCID:2A6PA-CR018 External FCCID:2A6PA-CR018 FCCID:2A6PA-CR018 FCCID:2A6PA-CR018 FCCID:2A6PA-CR018 FCCID:2A6PA-CR018 FCCID:2A6PA-CR018

Label:55*45mm FCCID:2A6PA-CR018

FCCID:2A6PA-CR018 Internal FCCID:2A6PA-CR018 FCCID:2A6PA-CR018 ANT

Page1of1 RFExposureEvaluationReport 1RFEXPOSURE ProductName:Babyswing ModelNo:CR018 FCCID:2A6PA-CR018 NOTE:accordingtoKDB447498D01GeneralRFExposureGuidancev06 ， Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-g extremitySARevaluationforgeneralpopulationexposureconditions,bymeasurementornumerical simulation,isnotrequiredwhenthecorrespondingSARTestExclusionThresholdcondition(s), listedbelow,is(are)satisfied. For100MHzto6GHzandtestseparationdistances≤50mm,the1-gand10-gSARtest exclusionthresholdsaredeterminedbythefollowing: TheEUTisaportabledevice [(max.powerofchannel,includingtune-uptolerance,mW)/(min.testseparationdistance, mm)]·[√f(GHz)]≤3.0for1-gSAR,and≤7.5for10-gextremitySAR,where f(GHz)istheRFchanneltransmitfrequencyinGHz PoweranddistanceareroundedtothenearestmWandmmbeforecalculation Theresultisroundedtoonedecimalplaceforcomparison Theproductisusedatadistanceof5mmfromthehumanbody. Here, 1.1EUTRFEXPOSUREEVALUATION OperationalMode:EDR Channel (MHz) MaximumPeak Conducted OutputPower (dBm) Tuneup tolerance (dB) Maximum tune-up Power (dBm) Maximum tune-up Power (mW) Calculated value Exclusion threshold 24020.78 0±1 11.2590.3903 Conclusion:thecalculatedvalue≤3.0,SARisexempted.

Inverted F Antenna Specification Summary ITEM ANT SPEC Model Name 2.4G ANT Horizontal Vertical 2400MHz 2400MHz2500MHz2400MHz2400MHz 2500MHz Center Frequency -1.26 -0.76 -0.58 -5.25 -2.46 -1.86 MAX. Gain -0.58dBi Polarization Horizontal and Vertical Azimuth Beam Pattern Omni-directional Impedance 50 Ohm Antenna Length 38.20mm Manufacture ZHUHAI JIELI TECHNOLOGY CO.,LTD Antenna Photo & Length (mm) Horizontal: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -40 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -1.26174 -30.0801 -7.18716 2450 -0.765802 -36.5604 -7.48023 2500 -0.585582 -22.0315 -6.59127 Vertical: 2400 MHz 2450 MHz 2500 MHz Power (dBm) Max: 0 Min: -30 Scale: 5/div Gain(dB) Frequency (MHz) Max Min Avg 2400 -5.2537 -22.1424 -12.4294 2450 -2.4652 -24.5837 -10.4702 2500 -1.86120 -29.5214 -9.20432 ANT Test Labs：Attestation of Global Compliance Co., Ltd.

V1.0ReportNo.:DACE240830006RF001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouConnunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 1 of 63 RFTESTREPORT For ZhongshanCityCironbabyCo.,Ltd. ProductName:Babyswing TestModel(s).:CR018 ReportReferenceNo.:DACE240830006RF001 FCCID:2A6PA-CR018 Applicant’sName:ZhongshanCityCironbabyCo.,Ltd. Address: No.6,YongxingNorthRoad,YongxingIndustrialZone,HenglanTown ZhongshanCity,Guangdong TestingLaboratory:ShenzhenDACETestingTechnologyCo.,Ltd. Address: 101-102BuildingH5&1/F.,BuildingH,HongfaScience&Technology Park,Tangtou,Shiyan,Bao'anDistrict,Shenzhen,Guangdong,China TestSpecificationStandard:47CFRPart15.247 DateofReceipt:August30,2024 DateofTest:August30,2024toSeptember3,2024 DataofIssue:September3,2024 Result:Pass Note:Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofShenzhenDACE TestingTechnologyCo.,Ltd.ThisdocumentmaybealteredorrevisedbyShenzhenDACETestingTechnology Co.,Ltd.personnelonly,andshallbenotedintherevisionsectionofthedocument.Thetestresultsinthe reportonlyapplytothetestedsample V1.0ReportNo.:DACE240830006RF001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouConnunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 2 of 63 RevisionHistoryOfReport VersionDescriptionREPORTNo.IssueDate V1.0OriginalDACE240830006RF001September3,2024 NOTE1: Themanufacturershouldensurethatallproductsinseriesproductionareinconformitywiththeproductsampledetailedin thisreport.Iftheproductinthisreportisusedinanyconfigurationotherthanthatdetailedinthereport,themanufacturer mustensurethenewsystemcomplieswithallrelevantstandards. Compiledby:Supervisedby:Approvedby: BenTang/TestEngineerTomChen/ProjectEngineerMachaelMo/Manager V1.0ReportNo.:DACE240830006RF001 102,BuildingH1,&1/F.,BuildingH,HongfaScience&TechnologyPark,TangtouConnunity,ShiyanSubdistrict,Bao'anDistrict,Shenzhen,Guangdong,China Web:http://www.dace-lab.comTel:+86-755-23010613E-mail:[email protected] 3 of 63 CONTENTS 1TESTSUMMARY...................................................................................................................................................5 1.1TESTSTANDARDS........................................................................................................................................5 1.2SUMMARYOFTESTRESULT.........................................................................................................................5 2GENERALINFORMATION....................................................................................................................................6 2.1CLIENTINFORMATION..................................................................................................................................6 2.2DESCRIPTIONOFDEVICE(EUT)..................................................................................................................6 2.3DESCRIPTIONOFTESTMODES....................................................................................................................7 2.4DESCRIPTIONOFSUPPORTUNITS................................................................................................................7 2.5EQUIPMENTSUSEDDURINGTHETEST........................................................................................................8 2.6STATEMENTOFTHEMEASUREMENTUNCERTAINTY....................................................................................10 2.7IDENTIFICATIONOFTESTINGLABORATORY.................................................................................................10 2.8ANNOUNCEMENT.......................................................................................................................................10 3EVALUATIONRESULTS(EVALUATION)...........................................................................................................11 3.1ANTENNAREQUIREMENT............................................................................................................................11 3.1.1Conclusion:.................................................................................................................................11 4RADIOSPECTRUMMATTERTESTRESULTS(RF).........................................................................................12 4.1CONDUCTEDEMISSIONATACPOWERLINE................................................................................................12 4.1.1E.U.T.Operation:........................................................................................................................12 4.1.2TestSetupDiagram:...................................................................................................................12 4.1.3TestData:...................................................................................................................................13 4.2OCCUPIEDBANDWIDTH.............................................................................................................................15 4.2.1E.U.T.Operation:........................................................................................................................15 4.2.2TestSetupDiagram:...................................................................................................................15 4.2.3TestData:...................................................................................................................................15 4.3MAXIMUMCONDUCTEDOUTPUTPOWER....................................................................................................16 4.3.1E.U.T.Operation:........................................................................................................................16 4.3.2TestSetupDiagram:..........................................................................…

Text truncated - open the document above for the full version.

FCCID:2A6PA-CR018 ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) FCCID:2A6PA-CR018 Emissionsinfrequencybands(above1GHz)