2A6UH-UGW800PUCuGW800 Pro

uGW800 USER MANUAL 1. Introduction uGW800 is an IoT hotspot, designed by Amber-Link, supporting LoRaWAN, LongFi and Helium block-chain protocol, compatible with all standard LoRaWAN devices. Its runtime power consumption < 5W, but the signal coverage is more than 10 miles. One hotpsot can connect with thousands IoT devices and support real-time data transactions. 2. Network ItemDescription CPUQuad core Cortex-A35 64-bits [email protected] RAM2GB DDR3 FLASH64GB eMMC Wi-FiIEEE 802.11b/g/n 2.4G Ethernet10/100M SecurityATECC608 LoRa BasebandSX1303 + SX1250x2 (8+1 channels) LoRa BandsUS915, 923 GNSSGPS/Beidou Antenna PortRP-SMA x3 (SubGHz LoRa, GNSS, Ext.) Power SupplyType-C, DC-12V LEDColorful LED x1 for system status (power on, configure, network, etc.) Casingnylon & fiberglass, IP65 Size (mm)146 * 123 * 40 Enclosure(Optional)FRP antenna (700mm), wall installation kit 2. Network uGW800 integrates the Helium Miner firmware and LoRaWAN packet forward module. The hotspot sends the received packet to cloud or block-chain by either Ethernet or Wi-Fi network. 3. Specifications 4. Structure size 5. Interface 6. LED Indicator ColorIndicator status RedHotspot power-on and doing initialization YellowHotspot is running at data synchonizing GreenHotspot is ready for radio receive and uplink BlueHotspot is in configurate mode ---Turned off 7. Package Content 8. User guide Download the mobile App iPhone users search "uGWAN Hotspot" APP in Apple store and follow the guide for APP installation. Android users download and install the APPs by either uGWAN.io website or from Google Play store. Hotspot assembly Open the package, take out the device, power adapter and antenna Insert the RP-SMA connector of the antenna feeder Connect ethenet cable if needed Connect to 12V-DC power adapter (in packet) or power the device by USB Type-C adapter (not in the packet). Configure network and connect App with hotspot Open the uGWAN Hotspot App in your phone, register to enter, and select "Add Hotspot". Select uGW800-serier hotspot, you can read the network configuration instructions first, or select "Skip" to operate step by step according to the prompts on the page. Power on hotspot and insert a pin into the configuration hole (at the bottom of the device), press and hold the button for 5 seconds, the hotspot's LED turn to blue (may flickering). If you use Wi-Fi connection, select the Wi-Fi network in APP and enter password, then APP will send the configuration to the device. If you use Ethernet connection, select "Use Ethernet", make sure the network cable has connected with the device. Please note that the Ethernet connection currently only supports automatic IP acquisition. Enable 'remote control' feature if user wants to check hotpspot's status and control it remotely. At this step, the network configuration is completed, LED changes from blue to either yellow or green. 9. Installation guide uGW800 hotspot support both indoor and outdoor installation: Indoor: Place the hotspot on desk Connect antenna or antenna extension cable to the hotspot, place the antenna close to window as near as possible. Ethernet cable is needed. Connect 12V-DC power supply or USB Type-C cable Wall-mounted (outdoor): Check with uGWAN sales to get the wall-mount kit (not in the packet) Follow the guide to fix both hotpsot and FRP antenna solidly. Power the hotspot by either 12V-DC or Ethernet PoE (with PoE converter) Caution: Hotspot designed as IP65, DO NOT drop the device in water. The product installation MUST be safety and carefully, the wall should be solid enough to avoid collisions and drops. Place it close to the window or balcony as near as possible, outdoor is better, the hostpot can receive GPS signals, and the Sub-GHz antenna has a wide coverage. 10. FCC Caution This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. -- Amber-Link Network Technology Co., Ltd. --

C5266091_X8_Ed.1 1/1 Letter of Authorization <Amber-Link Network Technology Co., Ltd.> Company: Amber-Link Network Technology Co., Ltd. Address: Building 1,No.356, Guoshoujin Road, Shanghai, China Product Name: uGW800 Pro Model Number: uGW800PUC FCC Identifier: 2A6UH-UGW800PUC We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Yijia Wang Date: 2022.5.26 Title: Up Engineering Signature of applicant:

E TA Techno This report sh EUT Ap EUT Appearanc ology (Shang hall not be repr ppearanc ce ghai) Co., L roduced except ce td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 06A0476 age 1 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 06A0476 age 2 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap a: EUT pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 06A0476 age 3 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without t the written ap b: Adapter pproval of TA Te Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 06A0476 age 4 of 5 E TA Techno This report sh EUT Appearanc ology (Shang hall not be repr ce ghai) Co., L roduced except td. tin full, without Picture 1: t the written ap c: Antenna : Constituen pproval of TA Te ts of EUT Re echnology (Shan eport No.: R220 Pa nghai) Co., Ltd. 06A0476 age 5 of 5

Internal photo FCC ID: 2A6UH-UGW800PUC TA Technology (Shanghai) Co., Ltd. Page 1 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo Internal photo FCC ID: 2A6UH-UGW800PUC TA Technology (Shanghai) Co., Ltd. Page 2 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2A6UH-UGW800PUC TA Technology (Shanghai) Co., Ltd. Page 3 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2A6UH-UGW800PUC TA Technology (Shanghai) Co., Ltd. Page 4 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2A6UH-UGW800PUC TA Technology (Shanghai) Co., Ltd. Page 5 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2A6UH-UGW800PUC TA Technology (Shanghai) Co., Ltd. Page 6 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Internal photo FCC ID: 2A6UH-UGW800PUC TA Technology (Shanghai) Co., Ltd. Page 7 of 7 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd.

TA Techn o Code CFR demonstrat P TA T N ology (Shangh R47 Part15B / ting complian Prepared by: W Techn No.145, Jintan EM Applic FCC ID Produ Brand Model Repor t Issue hai) Co., Ltd. / ANSI C63.4 nce with the re Wei Liu ology g Rd, Tangzhe TEL: +8 FAX: +86- 0 MC TE cant A T D 2 ct u u u t No. R Date J tested the ab 4-2014. The te equirements y (Shan en Industry Pa 6-021-507911 021-50791141 EST R Amber-Li Technolo 2A6UH-U uGW800 uG uGW800P R2206A0 June 10, bove equipme est results sh as documen t Approved by nghai) ark, Pudong Sh 141/2/3 1/2/3-8000 REPO nk Netwo ogy Co., L UGW800P Pro PUC 0476-E1V 2022 ent in accorda ow that the e ted in this rep y: Guangchan ) Co., L hanghai, Chin ORT ork Ltd. PUC V1 ance with the equipment tes port. ng Fan Ltd. a e requirement sted is capabl ts in FCC le of E TA Techno This report sh 1 Test L 1.1 N 1.2 T 1.3 T 2 Gene 2.1 A 2.2 G 2.3 A 2.4 T 3 Test C 3.1 R 3.2 C 4 Main ANNEX A ANNEX B EMC Test Repo ology (Shang hall not be repr Laboratory .. Notes of the Test facility . Testing Loca eral Descript Applicant an General info Applied Stan Test Mode ... Case Result Radiated Em Conducted E Test Instrum A: The EUT A B: Test Setup ort ghai) Co., Lt roduced except .................. Test Repo r .................. ation ........... tion of Equip nd Manufactu rmation ...... ndards ........ .................. ts ............... mission ....... Emission .... ments ......... Appearance p Photos ..... td. tin full, without Table ................... rt ................. ................... ................... pment under urer Informa ................... ................... ................... ................... ................... ................... ................... ................... ................... TA-MB-0 t the written ap e of Con ................... ................... ................... ................... r Test .......... ation............ ................... ................... ................... ................... ................... ................... ................... ................... ................... 06-001E pproval of TA Te tents .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. Report No echnology (Shan .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .................. .: R2206A0476 Pag nghai) Co., Ltd. ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... ................... -E1V1 ge 2 of 19 ................ 5 ................ 5 ................ 5 ................ 5 ................ 6 ................ 6 ................ 6 ................ 7 ................ 8 ................ 9 ................ 9 .............. 14 .............. 17 .............. 18 .............. 19 E TA Techno This report sh Versi Rev. Rev. Note: previ o previo EMC Test Repo ology (Shang hall not be repr on Revisi .0 Initial i .1 Update This revised ously issued ously issued ort ghai) Co., Lt roduced except ion descrip issue of repo e description d report (Re d report (Rep d report and td. tin full, without ption ort. n. eport No. R2 port No. R22 dispose of i TA-MB-0 t the written ap 2206A0476-E 206A0476-E t accordingl 06-001E pproval of TA Te E1V1) supe E1). Please d y. Report No echnology (Shan Is Ju Jun rsedes and discard or de .: R2206A0476 Pag nghai) Co., Ltd. ssue Date une 6, 2022 ne 10, 2022 replaces the estroy the -E1V1 ge 3 of 19 2 e E TA Techno This report sh Num 1 2 Date of Date of Note: A (Shang Uncert a EMC Test Repo ology (Shang hall not be repr mber Tes Ra 2 Co f Testing: Ap f Sample Re All indication hai) Co., Lt d ainties were ort ghai) Co., Lt roduced except Sum st Case diated Emis nducted Em pril 27, 2022 eceived: Apr s of Pass/Fa d. based on not taken i n td. tin full, without mmary of ssion mission ~ May 5, 20 ril 27, 2022 ail in this rep interpretatio nto account TA-MB-0 t the written ap f measur Clause in FCC Part1 FCC Part1 022 port are opin ons and/or o and are pub 06-001E pproval of TA Te rement re FCC Rules 5.109, ANS 5.107, ANS nions expres observations blished for in Report No echnology (Shan esults I C63.4-201 I C63.4-201 ssed by TA T s of test resu nformational .: R2206A0476 Pag nghai) Co., Ltd. Concl 4 PA 4 PA Technology ults. Measur l purposes o -E1V1 ge 4 of 19 usion ASS ASS rement only. E TA Techno This report sh 1 Test 1.1 Not This repor (shangha conditions into accou regulatory 1.2 Tes FCC (Des TA Techn list of test A2LA (Ce TA Techn Accredita t 1.3 Tes Compa Addres City: Post c o Country Contac Telepho Fax: Websit e E-mail: EMC Test Repo ology (Shang hall not be repr t Labora tes of the rt shall not b ai) co., Ltd. s and modes unt and are p y compliance st facility signation nu ology (Shan facilities rec ertificate Nu ology (Shan tion to perfo sting Loca any: TA s: No Sh ode: 20 y: P. t: F a one: +8 +8 e: ht fa ort ghai) Co., Lt roduced except atory Test Repo be reproduce The results s of operatio published fo e of the app umber: CN1 nghai) Co., L cognized to umber: 3857 nghai) Co., L rm measure ation A Technolog o.145, Jinta hanghai 01201 R. China an Guangch 86-021-5079 86-021-5079 ttp://www.ta- nguangchan td. tin full, without ort ed in full or p documented on as describ or informatio licable stand 1179, Test F Ltd. has bee perform m e 7.01) Ltd. has bee ement. y (Shangha ng Rd, Tan g hang 91141/2/3 91141/2/3-8 -shanghai.co ng@ta-shan TA-MB-0 t the written ap p…

Text truncated - open the document above for the full version.

EMC Test Setup Report No.: R2206A0476 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 1 of 2 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Part 15B Test Setup 30MHz-1GHz 1GHz-18GHz Picture 1: Radiated Emission Test Setup EMC Test Setup Report No.: R2206A0476 TA Technology (Shanghai) Co., Ltd. TA-MB-06-001E Page 2 of 2 This report shall not be reproduced except in full, without the written approval of TA Technology (Shanghai) Co., Ltd. Picture 2: Conducted Emissions Test Setup