2A767-SWT0002RF Remote

1.= One speed Two speed Three speed 2. Button: This button turns the fan On or off. 3. The Press and release the button to turn the light ON/OFF 4.Press this button to dim the lamp 5.Press this button to start the timing function 6.Press this button to turn the fan and light on/off 7.Press this button to change the light color 8.Keep pressing this button to pair with the receiver IMPORTANT NOTE: To comply with the FCC RF exposure compliance requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void user’s authority to operate the device. Notice: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. This device complies with Industry Canada RSS for license-free radio equipment. Operation is allowed under the following two conditions: (1) the equipment shall not produce interference, and (2) the equipment user must accept any radio interference, even if the interference may endanger the operation of the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada Technical specifications were met. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Importante: para satisfacer con los requisitos sobre cumplimiento de exposición de radiofrecuencia de FCC, prohibe hacer el cambio en antenas o dispositivo. Cualquier cambio en la antena o el dispositivo puede hacer al dispositivo a violar los requisitos de exposición a radiofrecuencia y privandole al usuario el derecho a operar el dispositivo. Nota: los cambios o modificaciones que no hayan sido aprobado explícitamente por las partes responsables causarán privació n de derecho a operar el equipa los usuarios. Advertencia de FCC: este dispositivo está cumplido con artículo 15 de las reglas de FCC. La operación debe cumplir las siguientes dos condiciones: (1) el dispositivo no se genera interferencias dañinas, y (2) el dispositivo debe compartir con cualquier interferencia recibida, incluidas las interferencias que pueden causar operaciones inesperadas. Este dispositivo se satisface como el equipo de radio sin licencia de la RSS del Ministerio de Industria de Canadá. Se permite la operación en las siguientes dos condiciones: (1) el dispositivo no se genera interferencia, y (2) el usuario del dispositivo debe compartir con cualquier interferencia de radio, incluso si la interferencia puede perjudicar el funcionamiento del dispositivo. El término "IC" antes del número de certificación de radio: "se significa el cumplimiento con las especificaciones técnicas industriales canadienses. La operación debe cumplir las siguientes dos condiciones: (1) el dispositivo no se genera interferencias dañinas, y (2) el dispositivo debe compartir con cualquier interferencia recibida, incluidas las interferencias que pueden causar operaciones inesperadas. REMARQUE IMPORTANTE: Pour se conformer aux exigences de conformité de la FCC RF en matière d’ exposition , aucune modification de l’antenne ou de l’appareil n’est autorisée. Tout changement apporté à l’ antenne ou à l’appareil pourrait entraîner le dépassement des exigences d’exposition aux RF et annuler l’ autorisation de l’utilisateur de faire fonctionner l’appareil. Avis : Les changements ou modifications non expressément approuvés par la partie responsable de la conformit é pourraient annuler l’autorisation de l’utilisateur d’utiliser l’équipement. Attention FCC : Cet appareil est conforme à la partie 15 des règles de la FCC. Le fonctionnement est soumis aux deux conditions suivantes : (1) Cet appareil ne doit pas causer d’interférences nuisibles, et 2) cet appareil doit accepter toute interférence reçue, y compris les interférences pouvant causer un fonctionnement indé sirable. Cet appareil est conforme aux Industry Canada RSS pour l’équipement radio sans licence. Le fonctionnement est autorisé dans les deux conditions suivantes : (1) l’équipement ne doit pas produire de brouillage et (2) l’ utilisateur de l’équipement doit accepter tout brouillage radio, même si…

Text truncated - open the document above for the full version.

Summer Wind International Ltd 2023.04.27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(i) request for 2A767-SWT0002 [Summer Wind International Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, (Applicant signature) (Applicant printed name): Deon chen Summer Wind International Ltd 2023.04.27 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: Attestation Statements Part 2.911(d)(5)(ii) request for 2A767-SWT0002 [Summer Wind International Ltd (“the applicant”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name): Deon chen

Summer Wind International Ltd U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: Baihetian Innovative Solutions FRN: 0033401605 Contact Name: Kenneth Young Street Address: 6837 Chase Rd City/Province/Zip: Dearborn, MI 48126 Telephone No: 313-395-3113 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: Signed by (Printed Name/Title): The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Summer Wind International Ltd Grantee Code: 2A767 FCC ID:2A767-SWT0002 Contact Name: Deon chen Street Address: No.39, Jinou Road, Jianghai District, City/Province/Zip: Jiangmen City, Guangdong Province, China. Telephone No: +86 0750-7360988 Email: [email protected] Applicant Signature: Date: 2023/05/04 Signed by (Printed Name/Title): Deon chen/ Manager

Summer Wind International Ltd 2023.04.27 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: RF Remote Trademark: N/A MODEL: SW-T0002 FCC ID:2A767-SWT0002 To Whom It May Concern: This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the - Block Diagram - Schematics - Operational Description required to be submitted with this application be permanently withheld from public review. The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Please contact me if there is any information you may need. Sincerely, Client’s signature: Client’s name / title : Deon chen /Manager Contact information / address: No.39, Jinou Road, Jianghai District, Jiangmen City, Guangdong Province, China.

Summer Wind International Ltd 2023.04.27 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize Shenzhen BCTC Testing Co., Ltd to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Client’s signature: Client’s name / title : Deon chen /Manager Contact information / address: No.39, Jinou Road, Jianghai District, Jiangmen City, Guangdong Province, China.

External Photos

Label & label location 3 20mm*20mm FCCID:2A767-SWT0002 Label location

Internal Photos Antenna

RF EXPOSURE EVALUATION METHOD FCC ID: 2A767-SWT0002 Applicable standard： In accordance with FCC 47 CFR part 2 (2.1093) this device has been defined as a portable device which is defined as a transmitting device designed to be used so that the radiating structure(s) of the device is/are within 20 centimeters of the body of the user. Portable devices must be evaluated using the specified in FCC 47 CFR part 2 (2.1093) and ANSI/IEEEC95.1-1992. and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528-2003. Per FCC KDB 447498 D01 v06, the 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances s 50 mm are determined by: SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,where f(GHz) is the RF channel transmit frequency in GHz Power and distance are rounded to the nearest mW and mm before calculation The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. Modulation Test Channel Output Power (dBuV/m) Output Power (dBm) ASK Low 71.96 -27.94 Below 1GHz: dBm=dBuV/m-95.2-4.7 max possible output power (PK,ERP)：-28±1dBm 0dBi logarithmic terms convert to numeric result is nearly 1 -27dBm=0.0020mW 303.875MHz [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance,mm)] · [√f(GHz)]=0.0020/5*√0.303875=0. 00011≤3.0 Conclusion: 1. [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] < 3.0. 2. SAR Test Exclusion Thresholds is 3.0 for separation distance 5mm. Therefore, SAR test is not required.

Material specification manufacturer: Address: 1. 2. 3. Type:PCB on-board antenna Features 1.*Stable and reliable in performances 2.*RoHS compliance 4. Antenna Dimensions (unit: mm) 5. Antenna Picture

No.：BCTC/RF-EMC-00 5 Page: 1 of 30 Edition：A.5 TEST REPORT Shenzhen BCTC Testing Co., Ltd. Report No.: BCTC2304833643E Applicant: Summer Wind International Ltd Product Name: RF Remote Model/Type Ref.: SW-T0002 Tested Date: 2023-04-14 to 2023-04-20 Issued Date: 2023-04-20 Report No.: BCTC2304833643E No.：BCTC/RF-EMC-00 5 Page: 2 of 30 Edition：A.5 FCC ID:2A767-SWT0002 The test report is effective only with both signature and specialized stamp. This result(s) shown in this report refer only to the sample(s) tested. Without written approval of Shenzhen BCTC Testing Co., Ltd, this report can’t be reproduced except in full. The tested sample(s) and the sample information are provided by the client. Product Name: RF Remote Trademark: N/A Model/Type Ref.: SW-T0002 Prepared For: Summer Wind International Ltd Address: No.39, Jinou Road, Jianghai District, Jiangmen City, Guangdong Province, China. Manufacturer: Summer Wind International Ltd Address: No.39, Jinou Road, Jianghai District, Jiangmen City, Guangdong Province, China. Prepared By: Shenzhen BCTC Testing Co., Ltd. Address: 1-2/F., Building B, Pengzhou Industrial Park, No.158, Fuyuan 1st Road, Zhancheng, Fuhai Subdistrict, Bao'an District, Shenzhen, Guangdong, China Sample Received Date: 2023-04-14 Sample tested Date: 2023-04-14 to 2023-04-20 Issue Date: 2023-04-20 Report No.: BCTC2304833643E Test Standards: FCC Part15.231 ANSI C63.10-2013 Test Results: PASS Tested by: Approved by: Jeff.Fu/Project Handler Zero Zhou/Reviewer Report No.: BCTC2304833643E No.：BCTC/RF-EMC-00 5 Page: 3 of 30 Edition：A.5 Table Of Content Test Report Declaration Page 1. Version .................................................................................................................. 4 2. Test Summary ....................................................................................................... 5 3. Measurement Uncertainty ..................................................................................... 6 4. Product Information And Test Setup ..................................................................... 7 4.1 Product Information ............................................................................................... 7 4.2 Test Setup Configuration ...................................................................................... 7 4.3 Support Equipment ............................................................................................... 7 4.4 Channel List .......................................................................................................... 8 4.5 Test Mode ............................................................................................................. 8 5. Test Facility And Test Instrument Used ................................................................. 9 5.1 Test Facility ........................................................................................................... 9 5.2 Test Instrument Used ............................................................................................ 9 6. Conducted Emissions .......................................................................................... 11 6.1 Block Diagram Of Test Setup .............................................................................. 11 6.2 Limit .................................................................................................................... 11 6.3 Test Procedure ................................................................................................... 11 6.4 EUT Operating Conditions .................................................................................. 12 6.5 Test Result .......................................................................................................... 12 7. Radiated Emissions ............................................................................................. 13 7.1 Block Diagram Of Test Setup .............................................................................. 13 7.2 Limit .................................................................................................................... 14 7.3 Test Procedure ................................................................................................... 16 7.4 EUT Operating Conditions .................................................................................. 17 7.5 Test Result .......................................................................................................... 17 8. Bandwidth Test .................................................................................................... 21 8.1 Block Diagram Of Test Setup .............................................................................. 21 8.2 Limit .................................................................................................................... 21 8.3 Test Procedure ................................................................................................... 21 8.4 EUT Operating Conditions .................................................................................. 21 8.5 Test Result .......................................................................................................... 22 9. Calculation Of Average Factor ............................................................................ 23 10. Dwell Time ........................................................................................................... 25 10.1 Block Diagram Of Test Setup ............................................................................ 25 10.2 Limit .................................................................................................................. 25 10.3 Test Procedure ................................................................................................. 25 10.4 Test Result ........................................................................................................ 26 11. Antenna Requirement ..........…

Text truncated - open the document above for the full version.

Report No.: BCTC2304833643E No.：BCTC/RF-EMC-00 5 Page: 28 of 29 Edition：A.5 13. EUT Test Setup Photographs Radiated Measurement Photos