2A79Y-Z8laser engraving machine

Please read this instruction manual carefully before use Please use the laser engraving machine correctly and safely Z8 User Manual 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Important Statement! All losses caused by improper use or failure to follow the steps in the manual shall be borne by the individual. The final right of interpretation of the manual belongs to our company, which also reserves the right to modify all information, data, technical details, etc. in this manual. Safety Precautions ★Before operating the equipment, users must carefully read the manual and strictly follow the operating procedures. ★Laser processing may be risky, and users should carefully consider whether the object being processed is suitable for laser operation. ★The processing object and emissions should comply with local laws and regulations. ★The laser radiation may cause the following situations: ① Ignition of surrounding flammable materials; ② During laser processing, other radiation and toxic and harmful gases may be generated due to different processing objects; ③ Direct exposure to laser radiation can cause human harm. Firefighting equipment must be equipped in the use site. It is prohibited to stack flammable and explosive items around the workbench and equipment. At the same time, it must be well ventilated. ★The environment where the equipment is located should be dry, free of pollution, vibration, strong electricity, strong magnetism and other interference and influence. The working environment temperature is 5~30°C, and the working environment humidity is 30-65% rh (no condensation) ★Equipment operating voltage: AC100-240V. ★The engraving machine and other related equipment must be safely grounded before they can be turned on and operated. ★When the equipment is turned on, it is necessary to be on duty throughout the process. All power supplies must be cut off before leaving to prevent abnormal conditions. If any abnormal conditions occur, please turn off the power immediately! ★It is strictly forbidden to place any irrelevant total reflection or diffuse reflection objects in the equipment to prevent the laser from reflecting on the human body or flammable items. ★The equipment should be kept away from electrical equipment that is sensitive to electromagnetic interference, which may cause electromagnetic interference to it. ★There is high voltage or other potential dangers inside the laser equipment, and non-professionals are strictly prohibited from disassembling it. Thank you for purchasing the laser engraving machine. In order to better use and maintain this equipment, please read this manual carefully and follow the steps in the manual. Notice! 1. After the laser is turned on, it is strictly forbidden to aim at people, animals and flammable objects to avoid skin burns and fire. 2. The brightness of the laser is harmful to the eyes. Please do not look directly at the laser. 3. Keep your hands away from the machine when it is working to avoid injury 4. Turn off the power of the machine when it is not in use to avoid misoperation by a third party Maintenance and Care The laser module is a consumable. It is recommended to turn off the machine power for 10 minutes after 4 hours of engraving and 1 hour of cutting. SAFETY INSTRUCTIONS 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 Warning To assure continued compliance, any changes or modifications not expressly approved by the party.Responsible for compliance could void the user’s authority to operate this equipment. FCC Statement This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. -Increase the separation between the equipment and receiver. -Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. -Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement: The equipment complies with FCC Radiation exposure limits set forth for uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. FCC WARNING 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 01 Product Parameters........................................................................... 04 02 Products And Accessories.................................................................. 05 03 Functions & Accessories Introduction................................................... 07 04 Regular Product Maintenance................................................ ............... 18 05 Supported Software Overview............................................................ 19 09 PC Connection.......................................…

Text truncated - open the document above for the full version.

Rev1/26/2023 (DongguanXinjiaLaserTechnologyCo.,Ltd.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2/4/2026 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID:2A79Y-Z8 [DongguanXinjiaLaserTechnologyCo.,Ltd.]certifiesthattheequipmentforwhichauthorizationis soughtisnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuantto section2.903oftheFCCrules. [DongguanXinjiaLaserTechnologyCo.,Ltd.]certifiesthattheequipmentforwhichauthorizationis soughtdoesnotincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc. oranyofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyof itssuccessorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB 986446D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, PengWang/Manager Rev1/26/2023 (DongguanXinjiaLaserTechnologyCo.,Ltd.) FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2/4/2026 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2A79Y-Z8 [DongguanXinjiaLaserTechnologyCo.,Ltd.]certifiesthat,asofthedateofthefilingoftheapplication, theapplicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiaries oraffiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)PengWang/Manager

NO. （Number（Page （Contents） ofPage）Code） 1 SpecCover 11 2 SpecItem 11 3 Drawing 12 4 TestReports 13 5 SParameter 14 6 GainTest 15 7 8 9 10 --- 11--- 12 --- Tel:15818375487 No. 6, Qilin East Road, Daning, Humen Town, Dongguan City Dongguan Jiechuang Electronics Co., Ltd. Manufacture: DESCRIPTIONSIGNDATEAPPROVER D C B YD 2016-05-05 SCALE: 1/1 UNITS: mm REVISION: A APPROVED BY Tolerance TITLE:3G GSM ANTENNA PART NO.: GF3208-ipex 1-13CM DWG NAME:NB0020-113B-080IX.DWG CHECKED BYDESIDNED BY Tel :86-0769-33691210 Fax:86-0769-82381572 ±3° X° X.X ±0.20 X.XX ±0.10 Note: 1.Take" 点 "is the important dimension. 2.Tolerance:Unmarked tolerance refer to the standard tolerance please. 3.Pull Strength of the connector must be >/=1.0kg. 4.Note Connector orientation. FPC 32*8mm SHOWA-O.D. 1.13mm Black Mini Connector Part Number Name NB0020-A01 FPC R-CB-113B Coaxial Cable Connector CI-113 1 No. 2 3 1 1 Q'ty 1 Material leon 2016-05-05 jeff 2016-05-05 13 TestReports ElectricalProperties Frequency800~960MHz1710~2170MHz Impedance500hm V.S.W.R<=3.0 RadiationOmni-directional Gain(Peak)3dBi PolarizationLinear AdmittedPower1W Connectoripex PhysicalProperties AntennaMaterialFPC CableTypeO.D.1.13mm//120mm OperatingTemp. -10~+60 ̊C StorageTemp. -10~+70 ̊C Tel:15818375487 2400~2500MHz SParameterTest AgilentE5071C Tel:15818375487 GainTest Antenna Radiation Pattern VS Gain 0 45 90 135 180 225 270 315 -5 -5 -15 -15 -25 -25 -35 -35 -45 Tel:15818375487

DongguanXinjiaLaserTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:February4,2026 Subject;RequestforConfidentiality FCCID:2A79Y-Z8 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:PengWang Title:Manager

DongguanXinjiaLaserTechnologyCo.,Ltd. ‘Date：2026-2-4 ProductModelNumber:Z8,Z8Pro,Z8Max,Kintix,KintixPro,KintixMax, K11,K11Pro,K11Max,K20,K20Pro,K20Max,Z1,Z1Pro,Z1Max FCCID:2A79Y-Z8 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:PengWang/Manager Email:[email protected] Telephone:18587726261 Onbehalfof:DongguanXinjiaLaserTechnologyCo.,Ltd.

DongguanXinjiaLaserTechnologyCo.,Ltd. Date:2026-2-4 DearSir/Madam, We,DongguanXinjiaLaserTechnologyCo.,Ltd.Herebydeclaresthe,followingstatement Productname:laserengravingmachine FCCID:2A79Y-Z8 Modelno.:Z8,Z8Pro,Z8Max,Kintix,KintixPro,KintixMax,K11,K11Pro,K11Max, K20,K20Pro,K20Max,Z1,Z1Pro,Z1Max Allthemodelsareelectricalidenticalincludingthesamesoftwareparameterandhardware design,samemechanicalstructureanddesign,theonlydifferenceisthemodelnamed different. Sincerely, Name/Title:PengWang/Manager Company:DongguanXinjiaLaserTechnologyCo.,Ltd. Address:Room602,No.419,JinxingRoad,LiaobuTown,DongguanCity,Guangdong Province Email:[email protected] Telephone:18587726261

AnnexA ExternalPhotos TestModelNo.:Z8 Page 1 of4 AnnexA ExternalPhotos TestModelNo.:Z8 Page 2 of4 AnnexA ExternalPhotos TestModelNo.:Z8 Page 3 of4 AnnexA ExternalPhotos TestModelNo.:Z8 Page 4 of4

AnnexB ExternalPhotos TestModelNo.:Z8 Page 1 of8 AnnexB ExternalPhotos TestModelNo.:Z8 Page 2 of8 AnnexB ExternalPhotos TestModelNo.:Z8 Page 3 of8 AnnexB ExternalPhotos TestModelNo.:Z8 Page 4 of8 FPCantenna AnnexB ExternalPhotos TestModelNo.:Z8 Page 5 of8 FPCantenna AnnexB ExternalPhotos TestModelNo.:Z8 Page 6 of8 AnnexB ExternalPhotos TestModelNo.:Z8 Page 7 of8 AnnexB ExternalPhotos TestModelNo.:Z8 Page 8 of8

Page 1 of3 MAXLABTestingCo.,Ltd.ReportNo.:MAX26010164P01-R01RF RFTESTREPORT ReportReferenceNo........................:MAX26010164P01-R01RF FCCID................................................:2A79Y-Z8 Compiledby (position+printedname+signature) .. : Engineer/CindyZheng Supervisedby (position+printedname+signature) .. : Manager/HaleyWen Approvedby (position+printedname+signature)..: RFManager/VivianJiang Dateofissue ......................................... :February6,2026 TestingLaboratoryName ................ : MAXLABTestingCo.,Ltd. Address.................................................: 1/F,BuildingB,XinshidaiGRPark,ShiyanStreet,Bao'anDistrict, Shenzhen,Guangdong,518052,People’sRepublicofChina Applicant’sname...............................: DongguanXinjiaLaserTechnologyCo.,Ltd. Address ................................................. : Room602,No.419,JinxingRoad,LiaobuTown,DongguanCity, GuangdongProvince Testspecification..............................: Standard................................................:KDB447498D01GeneralRFExposureGuidancev06 MAXLABTestingCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe MAXLABTestingCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.MAXLABTesting Co.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthereader's interpretationofthereproducedmaterialduetoitsplacementandcontext. Equipmentdescription ..................... : laserengravingmachine TradeMark ............................................ : N/A Manufacturer ......................................... : DongguanXinjiaLaserTechnologyCo.,Ltd. Model/Typereference ......................... : Z8 ListedModels ..................................... : Z8Pro,Z8Max,Kintix,KintixPro,KintixMax,K11,K11Pro, K11Max,K20,K20Pro,K20Max,Z1,Z1Pro,Z1Max Modulation ........................................... : CCK/DSSS/OFDM Frequency .............................................. From2412-2462MHz Ratings ................................................... : DC12Vbyadaptor Result.....................................................:PASS Page 2 of3 MAXLABTestingCo.,Ltd.ReportNo.:MAX26010164P01-R01RF RFExposureEvaluation Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) AccordingtoKDB447498D01GeneralRFExposureGuidancev06,Unlessspecificallyrequiredbythe publishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-gextremitySARevaluationfor generalpopulationexposureconditions,bymeasurementornumericalsimulation,isnotrequiredwhenthe correspondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. Page 3 of3 MAXLABTestingCo.,Ltd.ReportNo.:MAX26010164P01-R01RF TestResultofRFExposureEvaluation WiFi2.4G Channel Freque ncy (MHz) Output powerto antenna (dBm) Outputpower toantenna (mW) Antenna Gain (dBi) PowerDensity atR=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 802.11b 241212.9019.5030.007741.0PASS 243712.9719.8230.007871.0PASS 246212.6718.4930.007341.0PASS 802.11g 241211.1012.8830.005121.0PASS 243711.9915.8130.006281.0PASS 246211.0912.8530.005101.0PASS 802.11n (HT20) 241210.7911.9930.004761.0PASS 243710.1510.3530.004111.0PASS 246210.2510.5930.004211.0PASS 802.11n (HT40) 24229.258.4130.003341.0PASS 24379.639.1830.003651.0PASS 24529.739.4030.003731.0PASS EUT'smoduleismorethan20cmawayfromthehumanbody. Conclusion:ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1091forthe uncontrolledRFExposureofmobiledevice.

Page 1 of37 MAXLABTestingCo.,Ltd. ReportNo.:MAX26010164P01-R01 FCCPART15SUBPARTCTESTREPORT FCCPART15.247 ReportReferenceNo. ....................... :MAX26010164P01-R01 FCCID. ................................................ :2A79Y-Z8 Compiledby (position+printedname+signature) .. : Engineer/CindyZheng Supervisedby (position+printedname+signature)..: Manager/HaleyWen Approvedby (position+printedname+signature) .. : RFManager/VivianJiang Dateofissue.........................................:February6,2026 TestingLaboratoryName................:MAXLABTestingCo.,Ltd. Address ................................................. : 1/F,BuildingB,XinshidaiGRPark,ShiyanStreet,Bao'anDistrict, Shenzhen,Guangdong,518052,People’sRepublicofChina Applicant’sname...............................:DongguanXinjiaLaserTechnologyCo.,Ltd. Address.................................................: Room602,No.419,JinxingRoad,LiaobuTown,DongguanCity, GuangdongProvince Testspecification..............................: Standard ................................................ : FCCPart15.247 KDB558074D0115.247MeasGuidancev05r02 ANSIC63.10:2020 MAXLABTestingCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongastheMAXLAB TestingCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.MAXLABTesting Co.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthereader's interpretationofthereproducedmaterialduetoitsplacementandcontext. Testitemdescription........................:laserengravingmachine TradeMark............................................: N/A Manufacturer.........................................: DongguanXinjiaLaserTechnologyCo.,Ltd. Model/Typereference.........................: Z8 ListedModels ...................................... : Z8Pro,Z8Max,Kintix,KintixPro,KintixMax,K11,K11Pro, K11Max,K20,K20Pro,K20Max,Z1,Z1Pro,Z1Max ModulationType..................................:CCK/DSSS/OFDM OperationFrequency..........................:From2412-2462MHz Rating.....................................................:DC12Vbyadaptor Result.....................................................:PASS MAXLABTestingCo.,Ltd. ReportNo.:MAX26010164P01-R01 Page 2 of37 TESTREPORT EquipmentunderTest:laserengravingmachine Model/Type:Z8 SeriesModelNo. Z8Pro,Z8Max,Kintix,KintixPro,KintixMax,K11,K11Pro, K11Max,K20,K20Pro,K20Max,Z1,Z1Pro,Z1Max ModelDeclaration:Allthemodelsareelectricalidenticalincludingthesamesoftware parameterandhardwaredesign,samemechanicalstructureand design,theonlydifferenceisthemodelnameddifferent. Applicant : DongguanXinjiaLaserTechnologyCo.,Ltd. Address: Room602,No.419,JinxingRoad,LiaobuTown,DongguanCity, GuangdongProvince Manufacturer : DongguanXinjiaLaserTechnologyCo.,Ltd. Address: Room602,No.419,JinxingRoad,LiaobuTown,DongguanCity, GuangdongProvince TestResult : PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. MAXLABTestingCo.,Ltd. ReportNo.:MAX26010164P01-R01 Page 3 of37 Contents 1TESTSTANDARDS..............................................................................................................................4 2SUMMARY.................................................................................................................................................5 2.1GeneralRemarks..........................................................................................................................................5 2.2ProductDescription.....................................................................................................................................5 2.3EquipmentUnderTest.................................................................................................................................5 2.4ShortdescriptionoftheEquipmentunderTest(EUT).............................................................................5 2.5EUToperationmode.....................................................................................................................................6 2.6BlockDiagramofTestSetup.......................................................................................................................6 2.7RelatedSubmittal(s)/Grant(s)...................................................................................................................6 2.8Modifications.................................................................................................................................................6 3TESTENVIRONMENT........................................................................................................................7 3.1Addressofthetestlaboratory....................................................................................................................7 3.2TestFacility...................................................................................................................................................7 3.3Environmentalconditions............................................................................................................................7 3.4TestDescription............................................................................................................................................8 3.5Statementofthemeasurementuncertainty..............................................................................................8 3.6EquipmentsUsedduringtheTest..............................................................................................................9 4TESTCONDITIONSANDRESULTS.......................................................................................11 4.1ACPowerConductedEmission................................................................................................................11 4.2RadiatedEmission..........................................................................................................…

Text truncated - open the document above for the full version.

TestModelNo.:Z8 TestModelNo.:Z8