2A7A6-PFC13ASmart Pet Feeder

User Manual Smart Pet Feeder (2.4G Wifi) Smartlyn Please read the instruction manual carefully before use and keep it properly (Due to the continuous upgrading of the APP, the actual functions shall be subject to what is displayed in the APP). Safety Instructions Dispose of all packaging materials properly. Some items may be packed in plastic bags; these bags could cause suffocation. Keep them away from children and pets. Do not immerse the base part in water at any time as it may damage electronic components like the control panel. This product uses 4 AA batteries as a backup power supply. Please use double power supply to ensure the normal use of the product. Only use accessories recommended or sold by the manufacturer. The use of accessories not recommended or sold by the manufacturer may cause an unsafe condition. Suggest following the instruction in this user manual to assemble or disassemble the feeder. Examine the feeder after installation. Do not plug in if there is water on the power cable or plug. Check the batteries regularly. Before leaving for an extended period of time, always replace batteries with new ones. Do not put your fingers into the food outlet or let your fingers touch the rotor. Keep the feeder close to your router, make sure the network signal is good, and it is ideal to make it within 5 meters without obstacles and walls(Depending on the coverage of the router you are using). Please do not use wet, canned or moist food; only put dry food into the food tank prevent from abnormal conditions even may including pet safety problems. - 01 - 2-Year Warranty Lifetime Support Warranty For guidance on product use and warranty extension, please contact our brand after-sales staff via email: [[email protected]] or call us at (1) 877-290-0617 (From Monday to Friday: 8 a.m.-5 p.m.)(PST) lf any questions related to orders, please contact the seller through the shopping platform. Product Name Portion Size Pet Food Product Capacity Product Weight Product Sizs Material Rated Power Power Suit For Smart Pet Feeder (2.4G Wifi) Cat, Dog, Rabbit, Squirrel, Small Pets 5W Eco-Friendly ABS 196*314*289mm/7.72*12.36*11.38in 1.13Kg/2.5lb 3L/≈13Cup Dry Food About 15g/0.03lb One Portion (Varies due to density of pet food) DC 5V Power Adapter(not included)， 4 AA Batteries (not included) Specifications - 02 - In the Box USB Cable*1 Stainless Steel Feeding Bowl*1 Desiccant*1 Desiccant Compartment Lid*1 Lid*1 Food Tank*1 Feeder Base*1 Bowl Tray*1 User Manual*1 User Manual Smart Pet Feeder (2.4G Wifi) Smartlyn Cannot be cleaned - 03 - 1 2 3 4 6 5 10 7 Lid Desiccant Desiccant Compartment Lid Food Tand Food Outlet Stainless Steel Feeding Bowl Bowl Tray Feeder Base Food Tank Lock Switch Control Panel 1 2 3 4 5 6 7 8 9 10 Product Overview 8 9 Cannot be cleaned Warning: Please keep the feeder base dry and do not wash it! - 04 - Scan the QR code to watch the video 1. Product assembly and cleaning 2. Install the APP & Log In Scan the code to watch the product installation and cleaning tutorial Download and install the "Smartlyn" App by scanning the QR code, or searching it on Google Play (Android)/ App Store (ios).After opening the app, if you don't have an account, please register one. If you have already have, please log in directly. - 05 - ● When installing the food tank, please assemble and follow the instruction as shown in. ● Food inlet should be the same direction as the dispensing outlet . 4 PRESS PRESS - 05 - Installation ●Insert the 5V power adapter(Not included) into the socket, plug in power cable of the feeder. ● Open the battery compartment at the bottom of the unit. Install 4 AA batteries (Not Included) in case of home outage (Dual power supplies are recommended for simultaneous use). ● When the indicator stays solid blue, it means that the device is using plug-in power and has been on. 3 Step 1 Connecting Power Indicator 2 1 DC Charging PortCable Management ▲Note: In Case of Power Outage:The device will automatically switch to battery power. While the app becomes disconnected and remote control is unavailable, the device will continue to execute preset feeding schedules configured during online mode. Note that feeding records cannot be viewed via mobile app during this period.Recommen- dation:Before extended absences (e.g., vacations or long trips), replace batteries to ensure sufficient charge. Always maintain dual power supply (AC adapter + batteries) to guarantee uninterrupted device operation. - 06 - ● Fill food tank with dry pet food. 12 12 ▲Note: 1. Please fill food tank with dry pet food, and do not use canned, wet or moist pet food. 2. Recommend kibble size ranging from 5-12mm/0.12-0.47in in diameter. Step 2 Filling Food Tank ● Make sure that the desiccant is in the desiccant compartment and cover it. ● Align the bulging of the food tray and holes in the base, and push upward to connect the two. Then place the stainless steel feeding bowl. ● Match the marking points on the lid and on the edge of food tank, and turn the lid clockwise to lock it. Step 3 Assembling the Food Tray - 07 - Buttons Short Press for Manual Feeding Long Press for WiFi Reset Indicator Press - - - - - - - One Portion 15S - - - - - - - Keep Holding The Indicator Flashing Blue Waiting for connection. Connection successful. Connection timed out. Indicates low battery (when using battery power only). Blue light blinking Blue light solid Green light solid Red light blinking Indicator Light Descriptions Note: If the connection times out, press and hold the + button for about 10 seconds to reset the device to the blue blinking light state for reconnection. - 08 - 1.Open the APP homepage - Add device 3. Select 2.4G WiFi and enter a good password. Next step 4. Wait for connection 5.Connection successfully 6. Click to finish Connect to APP (only support 2.4GHz network, not 5GHz) 2. Add - 09 - Feeding plan settings 1. Choose a feeding plan 2. Add a feeding plan 3. Select time (note the difference between AM and PM) 4.…

Text truncated - open the document above for the full version.

ShenzhenChuangzhileIntelligentTechnologyCompany Limited CoveredEquipmentCertificationAttestationLetter 1/4/2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2A7A6-PFC13A ShenzhenChuangzhileIntelligentTechnologyCompanyLimited(“theapplicant”) certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedbyanyof theentitiesidentifiedonthecurrentCoveredList,theapplicantshouldincludean explanationonwhytheequipmentisnot“covered”equipment. ShenzhenChuangzhileIntelligentTechnologyCompanyLimited(“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedonthe CoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asan entityproducing“covered”equipment. ShenzhenChuangzhileIntelligentTechnologyCompanyLimited(“theapplicant”)certifies thattheequipmentforwhichauthorizationissoughtdoesnotincludecybersecurityor anti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessors andassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886 andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:kanglilu Title:Manager CompanyName:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Date:1/4/2026

CERTIFICATIONDESIGNATINGAU.S.AGENTFOR SERVICEOF PROCESS Date: Dec. 31 , 202 5 FederalCommunicationsCommission Authorizationand EvaluationDivision 7435 OaklandMills Road Columbia,Maryland21046 FCC ID: 2A7A6-PFC13A To WhomIt May Concern: As requiredby section2.911(d)(7),we [ShenzhenChuangzhileIntelligentTechnology CompanyLimited,FRN: 0032512683] certifiesthat we acknowledgethe designation of a contactlocatedin the UnitedStatesfor purposesof actingas the applicant’s agent for serviceof process.We [ShenzhenChuangzhileIntelligentTechnologyCompany Limited] acceptsto maintainan agentfor no less than one year after the granteehas terminatedall marketingand importationor the conclusionof any Commission-related proceedinginvolvingthe equipment. As required by section 2.911(d)(7), we [LOBOS IOWA INC, 4623 Bittercreek Dr Colorado Springs CO 80922 US, FRN: 0036413961 ] certifies that we acknowledge our obligation acting as the applicant’s agent for service of process for the above referenced FCC ID. We [LOBOS IOWA INC ] confirm that we are not associated with or part of any TCB or FCC recognised test lab. Thankyou for your attentionto this matter. Sincerelyyours, Signatureby applicantSignatureby designatedagent(if different from applicant) PrintedName:kangliluPrintedName:HarleyLi Company:ShenzhenChuangzhileIntelligent TechnologyCompanyLimited Company:LOBOSIOWAINC Address:RM207,Unit #1, Building#F, PenglongHi-techpark, #11, Dafu Road,Dafu Community,GuanlanTown,LonghuaDistrict, Shenzhen,China Address:4623BittercreekDr Colorado SpringsCO 80922US Job Title: ManagerJob Title: Manager Email:[email protected]:[email protected] Telephone:18603058496Telephone:+18188180538

ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Date:2026-01-04 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION FCCID:2A7A6-PFC13A ToWhomItMayConcern: We,theundersigned,herebyauthorizeComplianceTesting,LLCtoactonourbehalfinallmatters relatingtoapplicationforequipmentauthorization,includingthesigningofalldocumentsrelatingto thesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothedenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.853(a). Signature PrintedName:kanglilu Company:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited JobTitle:Manager Email:[email protected] Telephone:18603058496

ShenzhenChuangzhileIntelligentTechnologyCompany Limited RequestforLong-TermConfidentialityLetter-FCC Date:2026-01-04 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,Maryland21046 Re:RequestforLong-Termconfidentiality FCCID:2A7A6-PFC13A Towhomitmayconcern, Weherebyrespectfullyrequestthatundertheprovisionof47CFR0.459and0.457(d)the documentslistedbelowandattachedwiththisapplicationforcertificationbeprovidedwithLong- Termconfidentialstatus.  Schematics OperationalDescription FrequencyBlockDiagrams Anyexhibit/informationforwhichwehaverequestedconfidentiality,butwhichmaynotbe accordedsuchtreatmentbytheFCC,shouldbereturnedtous. Thedocumentslistedabovecontaintradesecretsthataretreatedasconfidentialbyus. Substantialcompetitiveharmtouscouldresultshouldtheybemadeavailabletothepublic. Sincerelyyours, Signature PrintedName:kanglilu Company:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited JobTitle:Manager Email:[email protected] Telephone:18603058496

ShenzhenChuangzhileIntelligentTechnologyCompany Limited ProductSimilarityDeclaration Productname:SmartPetFeeder Modelname:PFC13,PFC13A,PFC13B,PFC13C,PFC13D FCCID:2A7A6-PFC13A We(ShenzhenChuangzhileIntelligentTechnologyCompany Limited)herebystatethatallthemodelsareelectricalidentical includingthesamesoftwareparameterandhardwaredesign(i.e., circuitdesign,PCBLayout,RFmodule/circuit,antennatype(s) andantennalocation,componentsonPCB,etc.,),same mechanicalstructureanddesign(includingproductenclosure, materials,etc.,).Onlythemodelnamesaredifferent. Signature: Name:kanglilu Title:Manager Date:2026-01-04

ReportNo.:BKC25125232ME-4 ExternalPhotos Model:PFC13 ReportNo.:BKC25125232ME-4 ReportNo.:BKC25125232ME-4 ReportNo.:BKC25125232ME-4 ※※※※※ENDOFREPORT※※※※※

FCCID:2A7A6-PFC13A Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation. 1.5CM 0.5CM

ReportNo.:BKC25125232ME-5 InternalPhotos Model:PFC13 ReportNo.:BKC25125232ME-5 ReportNo.:BKC25125232ME-5 ※※※※※ENDOFREPORT※※※※※

FCCID:2A7A6-PFC13A RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1091，Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-gextremity SARevaluationforgeneralpopulationexposureconditions,bymeasurementornumericalsimulation,isnot requiredwhenthecorrespondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. TestResultofRFExposureEvaluation Mode Frequency (MHz) Antenna Gain (dBi) Antenna Gain (numeric) Max conducted power Output powerto antenna (mW) Power Densityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2.4G WIFI 242201.00015.6937.070.007381PASS Remark: 2.4GWIFIantennagain=0dBi

Report ShenzhenChuangzhileIntelligentTechnologyCompanyLimited FCCID:2A7A6-PFC13A Model:PFC13 1.DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTb2412Ant110000 NVNTb2437Ant110000 NVNTb2462Ant110000 NVNTg2412Ant110000 NVNTg2437Ant110000 NVNTg2462Ant110000 NVNTn202412Ant110000 NVNTn202437Ant110000 NVNTn202462Ant110000 NVNTn402422Ant110000 NVNTn402437Ant110000 NVNTn402452Ant110000 Report DutyCycleNVNTb2412MHzAnt1 DutyCycleNVNTb2437MHzAnt1 Report DutyCycleNVNTb2462MHzAnt1 DutyCycleNVNTg2412MHzAnt1 Report DutyCycleNVNTg2437MHzAnt1 DutyCycleNVNTg2462MHzAnt1 Report DutyCycleNVNTn202412MHzAnt1 DutyCycleNVNTn202437MHzAnt1 Report DutyCycleNVNTn202462MHzAnt1 DutyCycleNVNTn402422MHzAnt1 Report DutyCycleNVNTn402437MHzAnt1 DutyCycleNVNTn402452MHzAnt1 Report 2.MaximumAverageConductedOutputPower ConditionModeFrequency (MHz) AntennaConductedPower (dBm) DutyFactor (dB) TotalPower (dBm) Limit (dBm) Verdict NVNTb2412Ant114.1014.130Pass NVNTb2437Ant113.27013.2730Pass NVNTb2462Ant112.81012.8130Pass NVNTg2412Ant114.61014.6130Pass NVNTg2437Ant114.7014.730Pass NVNTg2462Ant114.27014.2730Pass NVNTn202412Ant114.98014.9830Pass NVNTn202437Ant114.7014.730Pass NVNTn202462Ant114.19014.1930Pass NVNTn402422Ant115.69015.6930Pass NVNTn402437Ant115.52015.5230Pass NVNTn402452Ant115.41015.4130Pass Report AveragePowerNVNTb2412MHzAnt1 AveragePowerNVNTb2437MHzAnt1 Report AveragePowerNVNTb2462MHzAnt1 AveragePowerNVNTg2412MHzAnt1 Report AveragePowerNVNTg2437MHzAnt1 AveragePowerNVNTg2462MHzAnt1 Report AveragePowerNVNTn202412MHzAnt1 AveragePowerNVNTn202437MHzAnt1 Report AveragePowerNVNTn202462MHzAnt1 AveragePowerNVNTn402422MHzAnt1 Report AveragePowerNVNTn402437MHzAnt1 AveragePowerNVNTn402452MHzAnt1 Report 3.-6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTb2412Ant110.1590.5Pass NVNTb2437Ant110.160.5Pass NVNTb2462Ant110.1610.5Pass NVNTg2412Ant116.4160.5Pass NVNTg2437Ant116.4740.5Pass NVNTg2462Ant116.3680.5Pass NVNTn202412Ant117.6070.5Pass NVNTn202437Ant117.650.5Pass NVNTn202462Ant117.6190.5Pass NVNTn402422Ant136.4680.5Pass NVNTn402437Ant136.4170.5Pass NVNTn402452Ant136.1620.5Pass Report -6dBBandwidthNVNTb2412MHzAnt1 -6dBBandwidthNVNTb2437MHzAnt1 Report -6dBBandwidthNVNTb2462MHzAnt1 -6dBBandwidthNVNTg2412MHzAnt1 Report -6dBBandwidthNVNTg2437MHzAnt1 -6dBBandwidthNVNTg2462MHzAnt1 Report -6dBBandwidthNVNTn202412MHzAnt1 -6dBBandwidthNVNTn202437MHzAnt1 Report -6dBBandwidthNVNTn202462MHzAnt1 -6dBBandwidthNVNTn402422MHzAnt1 Report -6dBBandwidthNVNTn402437MHzAnt1 -6dBBandwidthNVNTn402452MHzAnt1 Report 4.OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTb2412Ant115.026 NVNTb2437Ant115.02 NVNTb2462Ant115.034 NVNTg2412Ant116.545 NVNTg2437Ant116.557 NVNTg2462Ant116.541 NVNTn202412Ant117.714 NVNTn202437Ant117.707 NVNTn202462Ant117.699 NVNTn402422Ant136.219 NVNTn402437Ant136.243 NVNTn402452Ant136.233 Report OBWNVNTb2412MHzAnt1 OBWNVNTb2437MHzAnt1 Report OBWNVNTb2462MHzAnt1 OBWNVNTg2412MHzAnt1 Report OBWNVNTg2437MHzAnt1 OBWNVNTg2462MHzAnt1 Report OBWNVNTn202412MHzAnt1 OBWNVNTn202437MHzAnt1 Report OBWNVNTn202462MHzAnt1 OBWNVNTn402422MHzAnt1 Report OBWNVNTn402437MHzAnt1 OBWNVNTn402452MHzAnt1 Report 5.MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/3kHz) DutyFactor (dB) TotalPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTb2412Ant1-20.60-20.68Pass NVNTb2437Ant1-20.740-20.748Pass NVNTb2462Ant1-21.460-21.468Pass NVNTg2412Ant1-19.60-19.68Pass NVNTg2437Ant1-19.710-19.718Pass NVNTg2462Ant1-20.120-20.128Pass NVNTn202412Ant1-19.940-19.948Pass NVNTn202437Ant1-20.350-20.358Pass NVNTn202462Ant1-20.750-20.758Pass NVNTn402422Ant1-22.230-22.238Pass NVNTn402437Ant1-22.170-22.178Pass NVNTn402452Ant1-22.40-22.48Pass Report PSDNVNTb2412MHzAnt1 PSDNVNTb2437MHzAnt1 Report PSDNVNTb2462MHzAnt1 PSDNVNTg2412MHzAnt1 Report PSDNVNTg2437MHzAnt1 PSDNVNTg2462MHzAnt1 Report PSDNVNTn202412MHzAnt1 PSDNVNTn202437MHzAnt1 Report PSDNVNTn202462MHzAnt1 PSDNVNTn402422MHzAnt1 Report PSDNVNTn402437MHzAnt1 PSDNVNTn402452MHzAnt1 Report 6.BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-44.08-30Pass NVNTb2462Ant1-56.23-30Pass NVNTg2412Ant1-36.78-30Pass NVNTg2462Ant1-51.57-30Pass NVNTn202412Ant1-35.81-30Pass NVNTn202462Ant1-49.55-30Pass NVNTn402422Ant1-33.9-30Pass NVNTn402452Ant1-42.61-30Pass Report BandEdgeNVNTb2412MHzAnt1Ref BandEdgeNVNTb2412MHzAnt1Emission Report BandEdgeNVNTb2462MHzAnt1Ref BandEdgeNVNTb2462MHzAnt1Emission Report BandEdgeNVNTg2412MHzAnt1Ref BandEdgeNVNTg2412MHzAnt1Emission Report BandEdgeNVNTg2462MHzAnt1Ref BandEdgeNVNTg2462MHzAnt1Emission Report BandEdgeNVNTn202412MHzAnt1Ref BandEdgeNVNTn202412MHzAnt1Emission Report BandEdgeNVNTn202462MHzAnt1Ref BandEdgeNVNTn202462MHzAnt1Emission Report BandEdgeNVNTn402422MHzAnt1Ref BandEdgeNVNTn402422MHzAnt1Emission Report BandEdgeNVNTn402452MHzAnt1Ref BandEdgeNVNTn402452MHzAnt1Emission Report 7.ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-44.55-30Pass NVNTb2437Ant1-44.55-30Pass NVNTb2462Ant1-44.09-30Pass NVNTg2412Ant1-41.29-30Pass NVNTg2437Ant1-40.8-30Pass NVNTg2462Ant1-40.29-30Pass NVNTn202412Ant1-40.3-30Pass NVNTn202437Ant1-40.58-30Pass NVNTn202462Ant1-39.97-30Pass NVNTn402422Ant1-38.14-30Pass NVNTn402437Ant1-38.75-30Pass NVNTn402452Ant1-38.64-30Pass Report Tx.SpuriousNVNTb2412MHzAnt1Ref Tx.SpuriousNVNTb2412MHzAnt1Emission Report Tx.SpuriousNVNTb2437MHzAnt1Ref Tx.SpuriousNVNTb2437MHzAnt1Emission Report Tx.SpuriousNVNTb2462MHzAnt1Ref Tx.SpuriousNVNTb2462MHzAnt1Emission Report Tx.SpuriousNVNTg2412MHzAnt1Ref Tx.SpuriousNVNTg2412MHzAnt1Emission Report Tx.SpuriousNVNTg2437MHzAnt1Ref Tx.SpuriousNVNTg2437MHzAnt1Emission

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC25125232ME-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of28 TESTREPORT Applicant:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Address: RM207,Unit#1,Building#F,PenglongHi-techpark,#11,DafuRoad, DafuCommunity,GuanlanTown,LonghuaDistrict,Shenzhen,China Manufacturer:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Address: RM207,Unit#1,Building#F,PenglongHi-techpark,#11,DafuRoad, DafuCommunity,GuanlanTown,LonghuaDistrict,Shenzhen,China ProductName:SmartPetFeeder ModelNumber:PFC13,PFC13A,PFC13B,PFC13C,PFC13D Trademark:PAPIFEED FCCID:2A7A6-PFC13A TestDate:Dec.05,2025-Dec.17,2025 DateofReport:Dec.18,2025 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheStandardrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10:2020 Preparedby(TestEngineer): CareyZheng Reviewer(Supervisor): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC25125232ME-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of28 TABLEOFCONTENT 1.GeneralInformation......................................................................................4 1.1.DescriptionofDevice(EUT).......................................................................................................................4 1.2.ChannelList..................................................................................................................................................4 1.3.Summaryoftestresult................................................................................................................................4 1.4.SpecialAccessoriesandAuxiliaryEquipment........................................................................................5 1.5.Testmode......................................................................................................................................................5 1.6.BlockDiagram...............................................................................................................................................5 1.7.TestConditions.............................................................................................................................................6 1.8.MeasurementUncertainty(95%confidencelevels,k=2)......................................................................6 1.9.TestFacility....................................................................................................................................................6 1.10.TestEquipment...........................................................................................................................................7 2.Conductedemissionatthemainsterminalstest......................................9 2.1.Limit................................................................................................................................................................9 2.2.TestSetup......................................................................................................................................................9 2.3.TestProcedure..............................................................................................................................................9 2.4.TestResult...................................................................................................................................................10 3.RadiatedSpuriousEmissions...................................................................12 3.1.Limit..............................................................................................................................................................12 3.2.TestSetup....................................................................................................................................................13 3.3.TestProcedure............................................................................................................................................15 3.4.TestResult...................................................................................................................................................16 4.ConductedSpuriousEmissions................................................................21 4.1.Limit..............................................................................................................................................................21 4.2.TestSetup....................................................................................................................................................21 4.3.TestProcedure............................................................................................................................................21 4.4.TestResult...................................................................................................................................................21 5.BandEdgeMeasurement...........................................................................22 5.1.Limit..............................................................................................................................................................22 5.2.Testsetup....................................................................................................................................................22 5.3.TestProcedure............................................................................................................................................22 5.4.TestResult...................................................................................................................................................22 6.-6dBBandwidthand99%BandwidthMeasurement..............................23 6.1.Limit...........................................…

Text truncated - open the document above for the full version.

1.AntennaSpecification ItemSpecification NameUAC101-A0Antenna WorkingFrequencyRange2.4-2.5GHz MaxPKGain 2400MHz:-0dBi 2450MHz:-0dBi 2500MHz:-0dBi VSWR2.0Max PolarizationLinear TypePCB Impedance50Ω Size20.5*7.5mm ManufacturerShengXianZhiKongCo.,Ltd Address ZhongxingHotel(QianhaiHOP International),No.19,Xinghua1st Road(Extension),Haiwang Community,Xin'anStreet,Bao'an District,Shenzhen,2101 Phi=0 Phi=90 Theta=90

ReportNo.:BKC25125232ME-3 EUTTESTPHOTO Model:PFC13 ReportNo.:BKC25125232ME-3