2A7A6-PFC22Companion Robot for Pets

Pet Companion Robot User Manual Please read this instruction manual carefully and keep it properly before using the product. Due to the continuous optimization and upgrading of the APP's functions, the content of this WiFi product manual is for reference only. Please refer to the real-time display page of the APP for the actual functions, usage methods and parameter configurations. Smartlyn Signal: 91% HD SCREENSHOTINTERCOMSCREEN RECORDING HOME PAGECONFIGURE PET ROBOT 1.Matters to Read Before Use 2.Equipment Maintenance 3.List of Prohibited Acts 1.1 This product is not waterproof. It is recommended to use indoors between +5°C and +40°C. 1.2 Place the device on a flat surface (such as ceramic tiles/wooden floors), avoid slopes or edge areas to prevent damage from falling. 1.3 The operator must be at least 14 years old. Children under 14 years old, the elderly or people with limited mobility should use it under the supervision of an adult 1.4 Only connect to a private home Wi-Fi to avoid data leakage caused by public networks. 1.5 Download the official APP in advance and complete the device binding. 1.6 Power Management: Use the original 5V/1A power adapter. Keep the device and charger ventilated during charging and do not cover them. 1.7 Remote Control: When operating through the APP, ensure a stable network to avoid accidental touches that may cause the device to get out of control. Periodically wipe the wheels to maintain the device. 1.8 Component Inspection: Check the surface and moving parts of the device weekly to prevent pets from biting off parts and causing a risk of ingestion. Warning: Do not touch the wheels while the device is operating to prevent injury. 1.Physical operation restrictions It is prohibited to disassemble, modify or weld the device by yourself. Any unauthorized repair will invalidate the warranty. 2. Environmental usage restrictions 3.2.1 It is prohibited to use the device in high - temperature or high - grease environments such as kitchens and balconies. Grease or steam may damage the electronic components. 3.2.2 It is prohibited to charge the device near flammable materials such as carpets and thick curtains. USER NOTICE 4.Liability Definition and Disclaimer 3. Data security restrictions It is prohibited to connect the device to unencrypted public Wi-Fi to prevent hackers from gaining access to the home network permissions. 1. Scope of user liability 4.1.1 If device damage or accidents occur due to the following behaviors, users shall bear full responsibility: Engaging in prohibited behaviors as stated in this notice (such as self - disassembly). 4.1.2 Using the device in non - recommended environments (such as high - temperature or humid conditions). 4.1.3 Exploitation of security vulnerabilities resulting from failure to update the system in a timely manner. 4.1.4 Malfunctions caused by pets biting the power cord or device components. 2. Company's liability exemption The company shall not bear any liability for compensation in the following situations: 4.2.1 Normal wear and tear of the equipment (such as battery degradation and casing wear). 4.2.2 Injuries to pets or property damage caused by users' incorrect operation. 3. Explanation of Warranty Policy Warranty scope: Within 12 months from the date of purchase, malfunctions caused by material or workmanship defects can be repaired free of charge. Situations not covered by the warranty: 4.3.1 Damage caused by human factors (such as dropping, water immersion). 4.3.2 Unauthorized repair or modification. 4.3.3 Malfunctions caused by the use of non - original accessories. Pet Companion Robot（WiFi-�.�G） Small pets such as cats and dogs Supports only �.�G WiFi (�G WiFi is not supported) TYPE-C charging + �.�V-����mAh Lithium Polymer (battery) 720P 360g 140*130*98mm PRODUCT SPECIFICATION PARAMETERS PRODUCT NAME APPLICABLE PETS RATED VOLTAGE PRODUCT POWER POWER SUPPLY TYPE PRODUCT MATERIAL PRODUCT WEIGHT PRODUCT SIZE NETWORK SUPPORT RESOLUTION Warning: Keep the main unit dry. Do not wash it with water! Switch Host ComputerUSB Type-C Data CableSpecification Network Configuration Button Cat - teasing feather Camera Night Vision Light Flashing Power Light TYPE-C charging port Wheel PRODUCT INTRODUCTION Smartlyn Scan the QR code to download "Smartlyn APP". Turn on the switch and connect to the network. Interact via voice in the APP and tell the cat to come and play. ON means turn on, and OFF means turn off. 1 3 Open the app and get ready to operate. 2 OPEN OPERATION Signal: 91% HD SCREENSHOTINTERCOMSCREEN RECORDING HOME PAGECONFIGURE PET ROBOT FUNCTIONS AND OPERATION GUIDE Long - press the WIFI button until the light blinks, which indicates that the connection has been established. Open the APP and use the wheel to control the robot. Charge it via the Type - C port, a nd the indicator light will turn on. Type - C port Charging Indicator Light 4 5 WIFI�.�G CONNECT THE APP AND SET UP THE FEEDING PLAN. INDICATOR LIGHT INSTRUCTIONS Please make sure to use this machine in an environment with a good wireless network to ensure its normal operation. NOTICE IconKey Definition Reset The Networ How To Use Press and hold the reset button for about 10 seconds until the red and blue lights flash alternately and the device enters the network waiting configuration state. Work Normally Indicator Light ColorIndicator light status The red light is flashing Low battery (when powered by battery only) The device is waiting to be connected. The device is connected to the network. The device has not been connected for an extended period. The blue light is flashing. The blue light stays on steadily. The red and blue lights are flashing. Scan the QR code to download Smartlyn. PREPARATIONS BEFORE CONNECTING TO WI-FI It is necessary to connect to a �.�G WiFi router at a distance of �-� meters without any partition walls. Make sure the indicator light flashes alternately in red and blue. If only the blue light is flashing, press and hold the WiFi re…

Text truncated - open the document above for the full version.

ShenzhenChuangzhileIntelligentTechnologyCompany Limited CoveredEquipmentCertificationAttestationLetter 1/4/2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2A7A6-PFC22 ShenzhenChuangzhileIntelligentTechnologyCompanyLimited(“theapplicant”) certifiesthattheequipmentforwhichauthorizationissoughtisnot“covered”equipment prohibitedfromreceivinganequipmentauthorizationpursuanttosection2.903ofthe FCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedbyanyof theentitiesidentifiedonthecurrentCoveredList,theapplicantshouldincludean explanationonwhytheequipmentisnot“covered”equipment. ShenzhenChuangzhileIntelligentTechnologyCompanyLimited(“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedonthe CoveredList(asaspecificallynamedentityoranyofitssubsidiariesoraffiliates)asan entityproducing“covered”equipment. ShenzhenChuangzhileIntelligentTechnologyCompanyLimited(“theapplicant”)certifies thattheequipmentforwhichauthorizationissoughtdoesnotincludecybersecurityor anti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.oranyofitssuccessors andassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886 andKDB986446D01CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:kanglilu Title:Manager CompanyName:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Date:1/4/2026

CERTIFICATIONDESIGNATINGAU.S.AGENTFOR SERVICEOF PROCESS Date: Dec. 31 , 202 5 FederalCommunicationsCommission Authorizationand EvaluationDivision 7435 OaklandMills Road Columbia,Maryland21046 FCC ID: 2A7A6-PFC22 To WhomIt May Concern: As requiredby section2.911(d)(7),we [ShenzhenChuangzhileIntelligentTechnology CompanyLimited,FRN: 0032512683] certifiesthat we acknowledgethe designation of a contactlocatedin the UnitedStatesfor purposesof actingas the applicant’s agent for serviceof process.We [ShenzhenChuangzhileIntelligentTechnologyCompany Limited] acceptsto maintainan agentfor no less than one year after the granteehas terminatedall marketingand importationor the conclusionof any Commission-related proceedinginvolvingthe equipment. As required by section 2.911(d)(7), we [LOBOS IOWA INC, 4623 Bittercreek Dr Colorado Springs CO 80922 US, FRN: 0036413961 ] certifies that we acknowledge our obligation acting as the applicant’s agent for service of process for the above referenced FCC ID. We [LOBOS IOWA INC ] confirm that we are not associated with or part of any TCB or FCC recognised test lab. Thankyou for your attentionto this matter. Sincerelyyours, Signatureby applicantSignatureby designatedagent(if different from applicant) PrintedName:kangliluPrintedName:HarleyLi Company:ShenzhenChuangzhileIntelligent TechnologyCompanyLimited Company:LOBOSIOWAINC Address:RM207,Unit #1, Building#F, PenglongHi-techpark, #11, Dafu Road,Dafu Community,GuanlanTown,LonghuaDistrict, Shenzhen,China Address:4623BittercreekDr Colorado SpringsCO 80922US Job Title: ManagerJob Title: Manager Email:[email protected]:[email protected] Telephone:18603058496Telephone:+18188180538

ShenzhenChuangzhileIntelligentTechnologyCompany Limited ProductSimilarityDeclaration Product name: Companion Robot for Pets Model name: PFC22, PFC22A, PFC22B, PFC22C, PFC22D FCC ID: 2A7A6-PFC22 We (ShenzhenChuangzhileIntelligentTechnologyCompany Limited) herebystate that all the modelsare electricalidentical includingthe same softwareparameterand hardwaredesign(i.e., circuit design,PCB Layout,RF module/circuit,antennatype(s) and antennalocation,componentson PCB, etc.,), same mechanicalstructureand design(includingproductenclosure, materials,etc.,) . Only the modelnamesare different. Signature: Name:kanglilu Title: Manager Dat e:2026-01-04

ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Date:2026-01-04 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION FCCID:2A7A6-PFC22 ToWhomItMayConcern: We,theundersigned,herebyauthorizeComplianceTesting,LLCtoactonourbehalfinallmatters relatingtoapplicationforequipmentauthorization,includingthesigningofalldocumentsrelatingto thesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothedenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.853(a). Signature PrintedName:kanglilu Company:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited JobTitle:Manager Email:[email protected] Telephone:18603058496

ShenzhenChuangzhileIntelligentTechnologyCompany Limited RequestforLong-TermConfidentialityLetter-FCC Date:2026-01-04 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,Maryland21046 Re:RequestforLong-Termconfidentiality FCCID:2A7A6-PFC22 Towhomitmayconcern, Weherebyrespectfullyrequestthatundertheprovisionof47CFR0.459and0.457(d)the documentslistedbelowandattachedwiththisapplicationforcertificationbeprovidedwithLong- Termconfidentialstatus.  Schematics OperationalDescription FrequencyBlockDiagrams Anyexhibit/informationforwhichwehaverequestedconfidentiality,butwhichmaynotbe accordedsuchtreatmentbytheFCC,shouldbereturnedtous. Thedocumentslistedabovecontaintradesecretsthataretreatedasconfidentialbyus. Substantialcompetitiveharmtouscouldresultshouldtheybemadeavailabletothepublic. Sincerelyyours, Signature PrintedName:kanglilu Company:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited JobTitle:Manager Email:[email protected] Telephone:18603058496

ReportNo.:BKC25125228ME-4 ExternalPhotos Model:PFC22 ReportNo.:BKC25125228ME-4 ReportNo.:BKC25125228ME-4

FCCID:2A7A6-PFC22 Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation. 1.5CM 0.5CM

ReportNo.:BKC25125228ME-5 InternalPhotos Model:PFC22 ReportNo.:BKC25125228ME-5 ReportNo.:BKC25125228ME-5 ReportNo.:BKC25125228ME-5 ReportNo.:BKC25125228ME-5 ReportNo.:BKC25125228ME-5 ReportNo.:BKC25125228ME-5 ※※※※※ENDOFREPORT※※※※※

FCCID:2A7A6-PFC22 RFExposureEvaluation AccordingtoKDB447498D01GeneralRFExposureGuidancev06andpart2.1091，Unlessspecifically requiredbythepublishedRFexposureKDBprocedures,standalone1-gheadorbodyand10-gextremity SARevaluationforgeneralpopulationexposureconditions,bymeasurementornumericalsimulation,isnot requiredwhenthecorrespondingSARTestExclusionThresholdcondition(s),listedbelow,is(are)satisfied. Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. TestResultofRFExposureEvaluation Mode Antenna Gain (dBi) Antenna Gain (numeric) Max conducted power Outputpowerto antenna(mW) PowerDensity atR=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2.4G WIFI 31.99513.7923.930.009501PASS Remark: 2.4GWIFIantennagain=3dBi

Report ShenzhenChuangzhileIntelligentTechnologyCompanyLimited FCCID:2A7A6-PFC22 Model:PFC22 1.DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTb2412Ant199.0600.12 NVNTb2437Ant198.9400.12 NVNTb2462Ant199.0600.12 NVNTg2412Ant198.5800.72 NVNTg2437Ant198.5800.72 NVNTg2462Ant198.5800.72 NVNTn202412Ant199.4900.25 NVNTn202437Ant198.4800.77 NVNTn202462Ant199.2400.38 NVNTn402422Ant110000 NVNTn402437Ant110000 NVNTn402452Ant110000 Report DutyCycleNVNTb2412MHzAnt1 DutyCycleNVNTb2437MHzAnt1 Report DutyCycleNVNTb2462MHzAnt1 DutyCycleNVNTg2412MHzAnt1 Report DutyCycleNVNTg2437MHzAnt1 DutyCycleNVNTg2462MHzAnt1 Report DutyCycleNVNTn202412MHzAnt1 DutyCycleNVNTn202437MHzAnt1 Report DutyCycleNVNTn202462MHzAnt1 DutyCycleNVNTn402422MHzAnt1 Report DutyCycleNVNTn402437MHzAnt1 DutyCycleNVNTn402452MHzAnt1 Report 2.MaximumAverageConductedOutputPower ConditionModeFrequency (MHz) AntennaConductedPower (dBm) DutyFactor (dB) TotalPower (dBm) Limit (dBm) Verdict NVNTb2412Ant113.67013.6730Pass NVNTb2437Ant113.61013.6130Pass NVNTb2462Ant113.07013.0730Pass NVNTg2412Ant113.7013.730Pass NVNTg2437Ant113.63013.6330Pass NVNTg2462Ant113.21013.2130Pass NVNTn202412Ant113.46013.4630Pass NVNTn202437Ant113.46013.4630Pass NVNTn202462Ant113.01013.0130Pass NVNTn402422Ant113.68013.6830Pass NVNTn402437Ant113.79013.7930Pass NVNTn402452Ant113.48013.4830Pass Report AveragePowerNVNTb2412MHzAnt1 AveragePowerNVNTb2437MHzAnt1 Report AveragePowerNVNTb2462MHzAnt1 AveragePowerNVNTg2412MHzAnt1 Report AveragePowerNVNTg2437MHzAnt1 AveragePowerNVNTg2462MHzAnt1 Report AveragePowerNVNTn202412MHzAnt1 AveragePowerNVNTn202437MHzAnt1 Report AveragePowerNVNTn202462MHzAnt1 AveragePowerNVNTn402422MHzAnt1 Report AveragePowerNVNTn402437MHzAnt1 AveragePowerNVNTn402452MHzAnt1 Report 3.-6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTb2412Ant19.0860.5Pass NVNTb2437Ant19.0830.5Pass NVNTb2462Ant19.0890.5Pass NVNTg2412Ant113.3770.5Pass NVNTg2437Ant114.2630.5Pass NVNTg2462Ant114.2630.5Pass NVNTn202412Ant118.3540.5Pass NVNTn202437Ant113.7250.5Pass NVNTn202462Ant114.7580.5Pass NVNTn402422Ant123.8150.5Pass NVNTn402437Ant125.020.5Pass NVNTn402452Ant124.6280.5Pass Report -6dBBandwidthNVNTb2412MHzAnt1 -6dBBandwidthNVNTb2437MHzAnt1 Report -6dBBandwidthNVNTb2462MHzAnt1 -6dBBandwidthNVNTg2412MHzAnt1 Report -6dBBandwidthNVNTg2437MHzAnt1 -6dBBandwidthNVNTg2462MHzAnt1 Report -6dBBandwidthNVNTn202412MHzAnt1 -6dBBandwidthNVNTn202437MHzAnt1 Report -6dBBandwidthNVNTn202462MHzAnt1 -6dBBandwidthNVNTn402422MHzAnt1 Report -6dBBandwidthNVNTn402437MHzAnt1 -6dBBandwidthNVNTn402452MHzAnt1 Report 4.OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTb2412Ant113.805 NVNTb2437Ant113.77 NVNTb2462Ant113.815 NVNTg2412Ant116.122 NVNTg2437Ant116.179 NVNTg2462Ant116.126 NVNTn202412Ant117.681 NVNTn202437Ant117.575 NVNTn202462Ant118.036 NVNTn402422Ant134.503 NVNTn402437Ant134.52 NVNTn402452Ant134.491 Report OBWNVNTb2412MHzAnt1 OBWNVNTb2437MHzAnt1 Report OBWNVNTb2462MHzAnt1 OBWNVNTg2412MHzAnt1 Report OBWNVNTg2437MHzAnt1 OBWNVNTg2462MHzAnt1 Report OBWNVNTn202412MHzAnt1 OBWNVNTn202437MHzAnt1 Report OBWNVNTn202462MHzAnt1 OBWNVNTn402422MHzAnt1 Report OBWNVNTn402437MHzAnt1 OBWNVNTn402452MHzAnt1 Report 5.MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/3kHz) DutyFactor (dB) TotalPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTb2412Ant1-16.030-16.038Pass NVNTb2437Ant1-160-168Pass NVNTb2462Ant1-16.770-16.778Pass NVNTg2412Ant1-19.360-19.368Pass NVNTg2437Ant1-19.820-19.828Pass NVNTg2462Ant1-19.790-19.798Pass NVNTn202412Ant1-19.550-19.558Pass NVNTn202437Ant1-19.80-19.88Pass NVNTn202462Ant1-20.260-20.268Pass NVNTn402422Ant1-20.070-20.078Pass NVNTn402437Ant1-19.520-19.528Pass NVNTn402452Ant1-19.870-19.878Pass Report PSDNVNTb2412MHzAnt1 PSDNVNTb2437MHzAnt1 Report PSDNVNTb2462MHzAnt1 PSDNVNTg2412MHzAnt1 Report PSDNVNTg2437MHzAnt1 PSDNVNTg2462MHzAnt1 Report PSDNVNTn202412MHzAnt1 PSDNVNTn202437MHzAnt1 Report PSDNVNTn202462MHzAnt1 PSDNVNTn402422MHzAnt1 Report PSDNVNTn402437MHzAnt1 PSDNVNTn402452MHzAnt1 Report 6.BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-46.11-30Pass NVNTb2462Ant1-56.28-30Pass NVNTg2412Ant1-40.76-30Pass NVNTg2462Ant1-51.27-30Pass NVNTn202412Ant1-45.69-30Pass NVNTn202462Ant1-55.46-30Pass NVNTn402422Ant1-33.8-30Pass NVNTn402452Ant1-42.49-30Pass Report BandEdgeNVNTb2412MHzAnt1Ref BandEdgeNVNTb2412MHzAnt1Emission Report BandEdgeNVNTb2462MHzAnt1Ref BandEdgeNVNTb2462MHzAnt1Emission Report BandEdgeNVNTg2412MHzAnt1Ref BandEdgeNVNTg2412MHzAnt1Emission Report BandEdgeNVNTg2462MHzAnt1Ref BandEdgeNVNTg2462MHzAnt1Emission Report BandEdgeNVNTn202412MHzAnt1Ref BandEdgeNVNTn202412MHzAnt1Emission Report BandEdgeNVNTn202462MHzAnt1Ref BandEdgeNVNTn202462MHzAnt1Emission Report BandEdgeNVNTn402422MHzAnt1Ref BandEdgeNVNTn402422MHzAnt1Emission Report BandEdgeNVNTn402452MHzAnt1Ref BandEdgeNVNTn402452MHzAnt1Emission Report 7.ConductedRFSpuriousEmission ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTb2412Ant1-46.84-30Pass NVNTb2437Ant1-47.02-30Pass NVNTb2462Ant1-46.91-30Pass NVNTg2412Ant1-44.44-30Pass NVNTg2437Ant1-44.6-30Pass NVNTg2462Ant1-40.03-30Pass NVNTn202412Ant1-40.78-30Pass NVNTn202437Ant1-40.93-30Pass NVNTn202462Ant1-43.93-30Pass NVNTn402422Ant1-42.55-30Pass NVNTn402437Ant1-41.66-30Pass NVNTn402452Ant1-41.64-30Pass Report Tx.SpuriousNVNTb2412MHzAnt1Ref Tx.SpuriousNVNTb2412MHzAnt1Emission Report Tx.SpuriousNVNTb2437MHzAnt1Ref Tx.SpuriousNVNTb2437MHzAnt1Emission Report Tx.SpuriousNVNTb2462MHzAnt1Ref Tx.SpuriousNVNTb2462MHzAnt1Emission Report Tx.SpuriousNVNTg2412MHzAnt1Ref Tx.SpuriousNVNTg2412MHzAnt1Emission Report Tx.SpuriousNVNTg2437MHzAnt1Ref Tx.SpuriousNVNTg2437MHzAnt1Emission

ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC25125228ME-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage1of28 TESTREPORT Applicant:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Address: RM207,Unit#1,Building#F,PenglongHi-techpark,#11,DafuRoad, DafuCommunity,GuanlanTown,LonghuaDistrict,Shenzhen,China Manufacturer:ShenzhenChuangzhileIntelligentTechnologyCompanyLimited Address: RM207,Unit#1,Building#F,PenglongHi-techpark,#11,DafuRoad, DafuCommunity,GuanlanTown,LonghuaDistrict,Shenzhen,China ProductName:CompanionRobotforPets ModelNumber:PFC22,PFC22A,PFC22B,PFC22C,PFC22D Trademark:PAPIFEED FCCID:2A7A6-PFC22 TestDate:Dec.05,2025-Dec.19,2025 DateofReport:Dec.19,2025 TestResult: ThisdevicedescribedabovehasbeentestedbyBKC,andthetest resultsshowthattheequipmentundertest(EUT)isincompliance withtheStandardrequirements.Anditisapplicableonlytothetested sampleidentifiedinthereport. TestProcedureUsed: Standards:FCCCFRTitle47Part15SubpartCSection15.247 ANSIC63.10:2020 Preparedby(TestEngineer): CareyZheng Reviewer(Supervisor): CaseyWang Approved(Manager): JerryLiao ShenzhenBKCTestingCo.,Ltd.ReportNo.:BKC25125228ME-1 TestReportTel:4000-875-3820755-84829082Web:Http://www.bkc-lab.comPage2of28 TABLEOFCONTENT 1.GeneralInformation......................................................................................4 1.1.DescriptionofDevice(EUT).......................................................................................................................4 1.2.ChannelList..................................................................................................................................................4 1.3.Summaryoftestresult................................................................................................................................4 1.4.SpecialAccessoriesandAuxiliaryEquipment........................................................................................5 1.5.Testmode......................................................................................................................................................5 1.6.BlockDiagram...............................................................................................................................................5 1.7.TestConditions.............................................................................................................................................6 1.8.MeasurementUncertainty(95%confidencelevels,k=2)......................................................................6 1.9.TestFacility....................................................................................................................................................6 1.10.TestEquipment...........................................................................................................................................7 2.Conductedemissionatthemainsterminalstest......................................9 2.1.Limit................................................................................................................................................................9 2.2.TestSetup......................................................................................................................................................9 2.3.TestProcedure..............................................................................................................................................9 2.4.TestResult...................................................................................................................................................10 3.RadiatedSpuriousEmissions...................................................................12 3.1.TestProcedure............................................................................................................................................12 3.2.Limit..............................................................................................................................................................13 3.3.TestSetup....................................................................................................................................................14 3.4.TestResult...................................................................................................................................................16 4.ConductedSpuriousEmissions................................................................21 4.1.Limit..............................................................................................................................................................21 4.2.TestSetup....................................................................................................................................................21 4.3.TestProcedure............................................................................................................................................21 4.4.TestResult...................................................................................................................................................21 5.BandEdgeMeasurement...........................................................................22 5.1.Limit..............................................................................................................................................................22 5.2.Testsetup....................................................................................................................................................22 5.3.TestProcedure............................................................................................................................................22 5.4.TestResult...................................................................................................................................................22 6.-6dBBandwidthand99%BandwidthMeasurement..............................23 6.1.Limit.....................................…

Text truncated - open the document above for the full version.

四路 w.wwxltx.cn 规 SPECIFICATIO 客 户 名 称 CUSTOMER 客 户 料 号 CUS PARTNO: 品 名 规 格 PARTNAME: 公 司 料 号 TPTPART NO: 版 本： 客户签章： 采购部 工程部 戴红波 备注：承认签章后请回复一份（或复印件）给我司，其余由贵公司留作存档。如果在签章的承认书（ 件）回复给我司之前，下了有关此规格产品的订单且又无特别说明，那么我司就确定贵司已完全承认了。 Pleasereturnonespecificationoronecopyofitwithyourchopandsignatureofapprovalandretain theothersforyourrecord. Intheeventofanorderbeingplacedforthispartnumberbeforethe chopandsignedwithspecification assumed that full approval have beengiven. / 南山区桃源街道龙 双阳 规 格 书 SPECIFICATIO N FOR APPROVAL CUSTOMER ： CUS PARTNO: PARTNAME: 内置天线 TPTPART NO: WWXL6008915 1.0 日期： 年 工程部 批 日期：2025年 10 销售部 批 童晓燕 公司 公司 备注：承认签章后请回复一份（或复印件）给我司，其余由贵公司留作存档。如果在签章的承认书（ 件）回复给我司之前，下了有关此规格产品的订单且又无特别说明，那么我司就确定贵司已完全承认了。 Pleasereturnonespecificationoronecopyofitwithyourchopandsignatureofapprovalandretain Intheeventofanorderbeingplacedforthispartnumberbeforethe chopandsignedwithspecification (orcopy) isre turnedandwithoutspecialexplanation assumed that full approval have beengiven. 第 1 页 月 日 准 10 月24日 准 童晓燕 深圳市万物相连通讯 有 备注：承认签章后请回复一份（或复印件）给我司，其余由贵公司留作存档。如果在签章的承认书（ 或复印 件）回复给我司之前，下了有关此规格产品的订单且又无特别说明，那么我司就确定贵司已完全承认了。 Pleasereturnonespecificationoronecopyofitwithyourchopandsignatureofapprovalandretain Intheeventofanorderbeingplacedforthispartnumberbeforethe turnedandwithoutspecialexplanation , itwill be 四路 w.wwxltx.cn 一、产品成品图 二、产品测试参数 产品名称Name 内置天线 （WWXL6008 电气参数 ELECTRICAL SPECTFICATIONS 频率范围 FrenquencyRange 2400 输入阻抗 Impedance 驻波比 VSWR 增益 Gain 3.0 极化方式 Polarization 线极化 辐射方向 Radiation / 南山区桃源街道龙 双阳 天线规格书 WWXL6008915） 型号ModelType ELECTRICAL SPECTFICATIONS 机械参数 MECHANICAL SPECTFICATIONS 2400 -2500MHz 尺寸Dimensions 15* 2 50Ω 连接器型号Connector IPEX ≤3.0 线长linelength 1.13 黑色 3.0 dBi 工作温度WorkingTemperature - 线极化 存放温度Limit Temperature - 45 全向 第 2 页 MECHANICAL SPECTFICATIONS 2 6.3*0.2mm IPEX 黑色 150±2mm 45°C - +85°C 45 °C - +85°C TheEnvironmentofAntennaRadiationPattem Tuningsupport AUT M Walkingcharnel HomAntenna MetalShieldingRoom Door 第 3 页 四路 w.wwxltx.cn 三、天线无源参数： 1.天线驻波比图： / 南山区桃源街道龙 双阳 第 4 页 第 5 页 四路 w.wwxltx.cn 四、产品结构图 / 南山区桃源街道龙 双阳 第 6 页 四路 w.wwxltx.cn 1 五、环境可靠性试验报告 、环境试验 试验 项目 试验样 板名称 内置天线（ 实验/检测 设备 检验 标准 1. 金属表面镀层 2. 电气测试符合设计要求；电压驻波比测试合格。 试验 名称 试验项目 高温 试验 温度（°C ） 试验样品温度稳定时间 （h） 试验持续时间（ 恢复时间（ 低温 试验 温度（°C ） 试验样品温度稳定时间 （h） 试验持续时间（ 恢复时间（ 恒定湿 热试验 温度（°C ） 相对湿度（ % 试验持续时间（ 恢复时间（ / 南山区桃源街道龙 双阳 、环境可靠性试验报告 高低温恒湿试验报告 高温、低温、恒湿试验 内置天线（ WWXL6008915） 测试日期 恒温恒湿试验箱 网络分析仪 测试数量 面镀层无脱落、裂痕、起皱等不良；非金属部分不能有变色、破裂、变形 电气测试符合设计要求；电压驻波比测试合格。 试验项目 要求 试验方 法 实际测 试数据 ） 试验样品温度稳定时间 试验持续时间（ h） 恢复时间（ h） +85±3 1 2 1 按照 GB2423. 1-89 第9 章 规定的 方法进 行 +87 1.2 2.3 1 ） 试验样品温度稳定时间 试验持续时间（ h） 恢复时间（ h） -45±3 1 2 1 按照 GB2423. 1-89 第8 章 规定的 方法进 行 -46 1.2 2.4 1.1 ） % ） 试验持续时间（ h） 恢复时间（ h） +40±2 90-95 21 1 按照 GB2423. 3-93 第5 章 规定的 方法进 行 +42 92 22 1.1 第 7 页 2022.10.24 5 PCS 破裂、变形、脱胶等不良。 结果 样品 判定 1 合格 2 合格 3 合格 4 合格 5 合格 1 合格 2 合格 3 合格 4 合格 5 合格 1 合格 2 合格 3 合格 4 合格 5 合格 四路 w.wwxltx.cn 2、盐雾试验 试验项目 试验样板名称 内置天线（ 设备名称 试验方法 将测试样板放入调制好的盐溶液试验箱内、盐雾腐蚀箱进行连续喷雾试验 盐溶液浓度 52g/L 实际测试数据 55g/L 试验标准 按照 GB/T6461 的评级》评级。 编号 耐腐蚀等级 1 Rp/Ra=10/10vsB 2 Rp/Ra=10/10vsB 3 Rp/Ra=10/10vsB 4 Rp/Ra=10/10vsB 5 Rp/Ra=10/10vsB / 南山区桃源街道龙 双阳 盐雾试验报告 盐雾试验 内置天线（WWXL6008915） 测试日期 盐雾腐蚀试验箱 测试数量 将测试样板放入调制好的盐溶液试验箱内、盐雾腐蚀箱进行连续喷雾试验 盐溶液 PH 值：6.5-7.2 试验周期： 盐溶液 PH 值：6.8 试验周期： GB/T10125 《人造气氛腐蚀试验、盐雾试验》进行试验；结果按照 GB/T6461 -2002 《金属基体上金属和其他无机覆盖层经腐蚀试验后是试样和试件 的评级》评级。 试验结果 耐腐蚀等级 实际测试数据 评定结果 Rp/Ra=10/10vsB Rp/Ra=10/10vsB 合格 Rp/Ra=10/10vsB Rp/Ra=10/10vsB 合格 Rp/Ra=10/10vsB Rp/Ra=10/10vsB 合格 Rp/Ra=10/10vsB Rp/Ra=10/10vsB 合格 Rp/Ra=10/10vsB Rp/Ra=10/10vsB 合格 第 8 页 2022.10.24 5 PCS 将测试样板放入调制好的盐溶液试验箱内、盐雾腐蚀箱进行连续喷雾试验 试验周期： 24h 试验周期： 26h 《人造气氛腐蚀试验、盐雾试验》进行试验；结果按照 《金属基体上金属和其他无机覆盖层经腐蚀试验后是试样和试件 备注 四路 w.wwxltx.cn PE / 南山区桃源街道龙 双阳 六、包装说明：每 PE 袋装100个；在放入大纸箱。 第 9 页

ReportNo.:BKC25125228ME-3 EUTTESTPHOTO Model:PFC22 ReportNo.:BKC25125228ME-3