2A7EH-E1E1 Smart Cude Voice-controlled Dashcam

E1 Smart Cude Voice-controlled Dashcam FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. ISED Statement English:This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). French: Cet appareil contient des émetteurs/récepteurs exempts de licence qui sont conformes aux RSS exemptés de licence d'Innovation, Sciences et Développement économique Canada. L'exploitation est soumise aux deux conditions suivantes : (1) Cet appareil ne doit pas provoquer d'interférences. (2) Cet appareil doit accepter toute interférence, y compris les interférences susceptibles de provoquer un fonctionnement indésirable de l'appareil. l'appareil numérique du ciem conforme canadien peut - 3 (b) / nmb - 3 (b). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. cet appareil est conforme à l'exemption des limites d'évaluation courante dans la section 2.5 du cnr - 102 et conformité avec rss 102 de l'exposition aux rf, les utilisateurs peuvent obtenir des données canadiennes sur l'exposition aux champs rf et la conformité. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. Cet équipement est conforme aux limites d'exposition aux rayonnements du Canada établies pour un environnement non contrôlé. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Cet équipement doit être installé et utilisé à une distance minimale de 20 cm entre le radiateur et votre corps.

FCC ID: 2A7EH-E1 IC: 28650-E1 External photos FCC ID: 2A7EH-E1 IC: 28650-E1 FCC ID: 2A7EH-E1 IC: 28650-E1 FCC ID: 2A7EH-E1 IC: 28650-E1

The size of the MIC logo is 5mm*5mm. Label location VANTRUE Description：E1 Smart Cude Voice-controlled Dashcam Model: E1 Input：5V2A FCC ID: 2A7EH-E1 IC : 28650-E1 XXXX株式会社

FCC ID: 2A7EH-E1 IC: 28650-E1 Internal photos BT&WIFI Antenna FCC ID: 2A7EH-E1 IC: 28650-E1 FCC ID: 2A7EH-E1 IC: 28650-E1 FCC ID: 2A7EH-E1 IC: 28650-E1 FCC ID: 2A7EH-E1 IC: 28650-E1 FCC ID: 2A7EH-E1 IC: 28650-E1 FCC ID: 2A7EH-E1 IC: 28650-E1 ********************** End of Report **********************

RFExposureevaluation FCCID:2A7EH-E1 1.Reference Accordingto§1.1307(b)(1),systemsoperatingundertheprovisionsofthissection shallbeoperatedinamannerthatensuresthatthepublicisnotexposedtoradio frequencyenergylevelinexcessoftheCommission’sguidelines. Accordingto§1.1310and§2.1091RFexposureiscalculated. KDB447498D01:MobileandPortableDevicesRFExposureProceduresand EquipmentAuthorizationPolicies 2.Limit LimitsforMaximumPermissibleExposure(MPE)/ControlledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) Averaging Time (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500– 100,000 614 1842/f 61.4 / / 1.63 4.89/f 0.163 / / (100)* (900/f 2 )* 1.0 f/300 5 6 6 6 6 6 LimitsforMaximumPermissibleExposure(MPE)/UncontrolledExposure Frequency Range(MHz) ElectricField Strength(V/m) MagneticField Strength(A/m) PowerDensity (mW/cm²) Averaging Time (minute) LimitsforOccupational/ControlledExposure 0.3–3.0 3.0–30 30–300 300–1500 1500– 100,000 614 824/f 27.5 / / 1.63 2.19/f 0.073 / / (100)* (180/f 2 )* 0.2 f/1500 1.0 30 30 30 30 30 F=frequencyinMHz *=Plane-waveequivalentpowerdensity 3.MPECalculationMethod PredicationofMPElimitatagivendistance Equationfrompage18ofOETBulletin65,Edition97-01 S=PG/4πR² Where:S=powerdensity P=powerinputtoantenna G=powergainoftheantennainthedirectionofinterestrelativetoanisotropic radiator R=distancetothecenterofradiationoftheantenna 4.AntennaInformation E1canonlyuseantennascertificatedasfollowsprovidedbymanufacturer; AntennaNo. ModelNo. ofantenna: Typeofantenna: Gainoftheantenna (Max.) Frequencyrange: BT&2.4GWIFI/FPCANT0.75dBifor2400-2500MHz 5.ManufacturingTolerance GFSK(Peak) ChannelChannel00Channel19Channel39 Target(dBm)1.01.01.0 Tolerance±(dB)1.01.01.0 WIFI(Peak) Frequency (MHz) 11b 241224372462 Target(dBm)14.014.014.0 Tolerance±(dB)1.01.01.0 Frequency (MHz) 11g 241224372462 Target(dBm)15.015.015.0 Tolerance±(dB)1.01.01.0 Frequency (MHz) 11n(HT20) 241224372462 Target(dBm)14.014.014.0 Tolerance±(dB)1.01.01.0 6.StandaloneMPEResult AsdeclaredbytheApplicant,theEUTisawirelessdeviceusedinafixapplication,at least20cmfromanybodypartoftheuserornearbypersons;fromthemaximumEUT RFoutputpower,theminimumseparationdistance,r=20cm,aswellasthegainof theusedantennais0.75dBi,theRFpowerdensitycanbeobtained. ModulationType OutputpowerAntenna Gain (dBi) Antenna Gain (linear) MPE (mW/cm 2 ) MPE Limits (mW/cm 2 ) dBmmW BT 2.01.58490.751.18850.00041.0000 2.4GWIFI16.039.81070.751.18850.00941.0000 Remark: 1.Outputpower(Peak)includingturn-uptolerance; 2.MPEevaluatedistanceis20cmfromusermanualprovidebymanufacturer. 7.Conclusion ThemeasurementresultscomplywiththeFCCLimitper47CFR2.1091forthe uncontrolledRFExposureofmobiledevice. ----------------THEENDOFREPORT---------------

ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd. 101#,BuildingK&BuildingT,TheSecondIndustrialZone,JiazitangCommunity, FenghuangStreet,GuangmingDistrict,Shenzhen,China FCCPART15SUBPARTCTESTREPORT FCCPART15.247 ReportReferenceNo........................: FCCID.................................................: GRCTR220602001-01 2A7EH-E1 Compiledby (position+printedname+signature) .. : TestingEngineerJimmyWang Supervisedby (position+printedname+signature)..: ProjectEngineerKelleyZhang Approvedby (position+printedname+signature)..: ManagerSamWang Dateofissue.........................................:Jun.22,2022 TestingLaboratoryName................: ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd. Address ................................................. : 101#,BuildingK&BuildingT,TheSecondIndustrialZone,Jiazitang Community,FenghuangStreet,GuangmingDistrict,Shenzhen,China Applicant’sname...............................: ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Address.................................................: Area401B,4thFloor,BuildingA7,No.416,XuegangNorthRoad, QinghuCommunity,LonghuaStreet,LonghuaDistrict,Shenzhen, Guangdong,China Testspecification..............................: Standard................................................: FCCPart15.247 ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongasthe ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerand sourceofthematerial.ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.takesno responsibilityforandwillnotassumeliabilityfordamagesresultingfromthereader'sinterpretationofthe reproducedmaterialduetoitsplacementandcontext. Testitemdescription ........................ : E1SmartCudeVoice-controlledDashcam TradeMark ............................................ : / Manufacturer.........................................: ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Model/Typereference ......................... : E1 ListedModels ...................................... : E1Lite,E1PRO Modulation ........................................... :GFSK Frequency..............................................From2402MHzto2480MHz Ratings ................................................... :DC5.0Vfromcarcharger Result.....................................................:PASS ReportNo.:GRCTR220602001-01Page 2 of 38 TESTREPORT EquipmentunderTest:E1SmartCudeVoice-controlledDashcam Model/Type:E1 ListedModels:E1Lite,E1PRO Applicant : ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Address: Area401B,4thFloor,BuildingA7,No.416,XuegangNorthRoad, QinghuCommunity,LonghuaStreet,LonghuaDistrict,Shenzhen, Guangdong,China Manufacturer : ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Address: Area401B,4thFloor,BuildingA7,No.416,XuegangNorthRoad, QinghuCommunity,LonghuaStreet,LonghuaDistrict,Shenzhen, Guangdong,China TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:GRCTR220602001-01Page 3 of 38 Contents 1TESTSTANDARDS..............................................................................................................................4 2SUMMARY.................................................................................................................................................5 2.1GeneralRemarks..........................................................................................................................................5 2.2ProductDescription.....................................................................................................................................5 2.3EquipmentUnderTest.................................................................................................................................5 2.4ShortdescriptionoftheEquipmentunderTest(EUT).............................................................................5 2.5EUToperationmode.....................................................................................................................................6 2.6BlockDiagramofTestSetup.......................................................................................................................6 2.7RelatedSubmittal(s)/Grant(s)...................................................................................................................6 2.8Modifications.................................................................................................................................................6 3TESTENVIRONMENT........................................................................................................................7 3.1Addressofthetestlaboratory....................................................................................................................7 3.2TestFacility...................................................................................................................................................7 3.3Environmentalconditions............................................................................................................................7 3.4Summaryofmeasurementresults..............................................................................................................8 3.5Statementofthemeasurementuncertainty..............................................................................................8 3.6EquipmentsUsedduringtheTest..............................................................................................................9 4TESTCONDITIONSANDRESULTS.......................................................................................10 4.1ACPowerConductedEmission................................................................................................................10 4.2RadiatedEmissionsandBandEdge.......................................................................…

Text truncated - open the document above for the full version.

ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd. 101#,BuildingK&BuildingT,TheSecondIndustrialZone,JiazitangCommunity, FenghuangStreet,GuangmingDistrict,Shenzhen,China FCCPART15SUBPARTCTESTREPORT FCCPART15.247 ReportReferenceNo........................: FCCID.................................................: GRCTR220602001-02 2A7EH-E1 Compiledby (position+printedname+signature)..: TestingEngineerJimmyWang Supervisedby (position+printedname+signature)..: ProjectEngineerKelleyZhang Approvedby (position+printedname+signature)..: ManagerSamWang Dateofissue.........................................:Jun.22,2022 TestingLaboratoryName................:ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd. Address ................................................. : 101#,BuildingK&BuildingT,TheSecondIndustrialZone,Jiazitang Community,FenghuangStreet,GuangmingDistrict,Shenzhen,China Applicant’sname...............................:ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Address.................................................: Area401B,4thFloor,BuildingA7,No.416,XuegangNorthRoad, QinghuCommunity,LonghuaStreet,LonghuaDistrict,Shenzhen, Guangdong,China Testspecification .............................. : Standard ................................................ :FCCPart15.247 ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.Allrightsreserved. Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongastheShenzhen GUORENCertificationTechnologyServiceCo.,Ltd.isacknowledgedascopyrightownerandsourceofthe material.ShenzhenGUORENCertificationTechnologyServiceCo.,Ltd.takesnoresponsibilityforandwill notassumeliabilityfordamagesresultingfromthereader'sinterpretationofthereproducedmaterialduetoits placementandcontext. Testitemdescription........................:E1SmartCudeVoice-controlledDashcam TradeMark ............................................ :/ Manufacturer ......................................... :ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Model/Typereference.........................: E1 ListedModels......................................: E1Lite,E1PRO ModulationType..................................:CCK/DSSS/OFDM OperationFrequency..........................:From2412-2462MHz Rating ..................................................... :DC5.0Vfromcarcharger Result ..................................................... :PASS ReportNo.:GRCTR220602001-02Page 2 of 32 TESTREPORT EquipmentunderTest:E1SmartCudeVoice-controlledDashcam Model/Type:E1 ListedModels:E1Lite,E1PRO Applicant : ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Address: Area401B,4thFloor,BuildingA7,No.416,XuegangNorthRoad, QinghuCommunity,LonghuaStreet,LonghuaDistrict,Shenzhen, Guangdong,China Manufacturer : ShenzhenSanjiangLechuangTechnologyCo.,Ltd. Address: Area401B,4thFloor,BuildingA7,No.416,XuegangNorthRoad, QinghuCommunity,LonghuaStreet,LonghuaDistrict,Shenzhen, Guangdong,China TestResult:PASS Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetest laboratory. ReportNo.:GRCTR220602001-02Page 3 of 32 Contents 1TESTSTANDARDS..............................................................................................................................4 2SUMMARY.................................................................................................................................................5 2.1GeneralRemarks..........................................................................................................................................5 2.2ProductDescription.....................................................................................................................................5 2.3ShortdescriptionoftheEquipmentunderTest(EUT).............................................................................5 2.4EUToperationmode.....................................................................................................................................6 2.5BlockDiagramofTestSetup.......................................................................................................................6 2.6RelatedSubmittal(s)/Grant(s)...................................................................................................................6 2.7Modifications.................................................................................................................................................6 3TESTENVIRONMENT........................................................................................................................7 3.1Addressofthetestlaboratory....................................................................................................................7 3.2TestFacility...................................................................................................................................................7 3.3Environmentalconditions............................................................................................................................7 3.4TestDescription............................................................................................................................................8 3.5Statementofthemeasurementuncertainty..............................................................................................8 3.6EquipmentsUsedduringtheTest..............................................................................................................9 4TESTCONDITIONSANDRESULTS.......................................................................................10 4.1ACPowerConductedEmission................................................................................................................10 4.2RadiatedEmission......................................................................................................................................11 4.3MaximumConductedOutputPower...................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2A7EH-E1 IC: 28650-E1 Test setup photos