2A7T4-HP-570C-APPCLAMP MULTIMETER

１ 4000 COUNTS AUTO RANGE INTELLIGENT DIGITAL AC/DC CLAMP MULTIMETER OPERATION MANUAL This LCD Auto Range Intelligent Digital AC/DC clamp multimeter is a portable, 4000 counts multimeter. It is ideally suited for field, laboratory, shop and home applications. The meter can be connected with mobile phone by Bluetooth, and display on phone by APP, you can remote monitoring the measurement condition, the distance control is 10～15m. 1. SAFETY INFORMATION The following safety information must be observed to insure maximum personal safety during the operation at this meter. 1) When measuring voltage ensure that instrument is not switched to the current range, resistance range, diode and continuity range, capacitance range or temperature range. 2) Use extreme care when measuring voltage above 50V. especially from sources where high energy is existed. 3) Avoid making connections to "live" circuits whenever possible. 4) Before making resistance measurements, diode or continuity test, capacitance test or temperature test, ensure that the circuit under test is de-energized. 5) Always ensure that the correct function and range is selected. 6) Extreme care should be taken when using the instrument to conjunction with a current transformer connected to the terminals if an open circuit occurs. 7) Ensure that the test leads and probes are in good condition with no damage to the insulation. 8) Take care not to exceed the over-load limits as given in the specifications. 9) Before opening the cover of the battery cabinet to replace batteries. disconnect the test leads from any external circuit, set the selector switch to "OFF" position. 10) Keep the fingers after the protection ring when measuring through the instrument lead. 11) Change the battery when the symbol “ ” appears to avoid incorrect data. 2. Panel Layout 1) Rotary Switch: Use this switch to select functions and ranges. 2) D.HOLD/ Back Light key: In any range, push the key, the present display value will be locked and the " H " symbol will appear, push it again to exit. Press “D.HOLD” button more than 2 seconds, the back light will light, press it more than 2 seconds again, the back light will light off. 3) SELECT key: This key work on the " " range. Push the key to choose resistance, capacitance, diode or continuity test. Press “SELECT” in “V ” range, choose AC voltage or DC voltage test. 4) RANGE Key: Press the “RANGE” key, the meter enters manual range mode, press it more than 2 seconds again, return to auto mode. 5) Hz/Duty Key: On “ACV/ACA” or “Hz” range, press the “Hz/Duty” key, you can choose the Frequency or Duty Cycle measurement. 6) REL Key: Press the “REL” key, the meter enters relative measuring mode, “REL” is displayed on the LCD and the present reading becomes the reference value and displayed on the display. Relative measurement REL△=measurement value-Reference value. Press it again to exit. 7) LCD display: 4000 counts digit, full function symbol display. 8) T+VΩ Input Jack、COM Input Jack、T- Input Jack 2. SPECIFICATIONS 2.1 GENERAL SPECIFICATIONS Display: 4000 counts digit LCD with a max. reading of 4000 monitor with character 18mm high. LCD size: 51.3×24.5mm. Range control: Auto range control. Polarity: Automatic negative polarity indication. Zero adjustment: Automatic. Over range indication: Only the "OL" display. Low Battery Indication: “ ” displayed Safety Standards: The meter is up to the standards of IEC1010 Double Insulation, Pollution Degree 2, Overvoltage Category II. Clamp opening size: 40mm. Operating Environment: Temperature 0～40,°C humidity＜80%RH. Storage Environment: Temperature -20～60,°C humidity＜90%RH. Power supply: 9V Zinc-carbon battery. Dimension: 225(H)×77(W)×45(D)mm. Weight: Approx. 330g (including batteries). 2.2 ELECTRICAL SPECIFICATIONS Accuracies are ±(% of reading +number in last digit) at 23±5,≤70%RH.°C 2.2.1 DC Voltage Range Accuracy Resolution 400mV 0.1mV 4V 1mV 40V 10mV 400V ±(0.5% of rdg + 2 digits) 100mV 1000V ±(0.8% of rdg + 2 digits) 1V Overload protection: 1000V DC/750Vrms AC Impedance: 10MΩ, More than 100MΩ on 400mV scale 2.2.2 AC Voltage Range Accuracy Resolution Frequency 4V 1mV 40V 10mV 400V ±(0.8% of rdg + 3 digits) 100mV 750V ±(1.2% of rdg + 3 digits) 1V 40～400Hz Average sensing, calibrated to rms of sine wave Overload protection: 1000V DC/750Vrms AC Impedance: 10MΩ. 2.2.3 DC Current Range Accuracy Resolution 200A ±(3.0% of rdg + 12 digits) 0.1A 0～800A ±(3.5% of rdg + 12 digits) 1000A 800～1000A ±(6.5% of rdg + 12 digits) 1A Overload protection: 1000Arms within 60 seconds It is recommended to measure the current above 10A. 2.2.4 AC Current Range Accuracy Resolution Frequency 400A ±(3.0% of rdg + 12 digits) 0.1A 0～800A ±(3.5% of rdg + 12 digits) 1000A 800～1000A ±(6.5% of rdg + 12 digits) 1A 50～60Hz Average sensing, calibrated to rms of sine wave Overload protection: 1000Arms within 60 seconds It is recommended to measure the current above 10A. 2.2.5 Resistance Range Accuracy Resolution 400Ω ±(1.0% of rdg + 3 digits) 0.1Ω 4kΩ 1Ω 40kΩ 10Ω 400kΩ 100Ω 4MΩ ±(1.0% of rdg + 2 digits) 1kΩ 40MΩ ±(1.5% of rdg + 3 digits) 10kΩ Overload protection: 250V DC/250Vrms AC 2.2.6 Capacitance Range Accuracy Resolution 51.2nF ±(3.0% of rdg + 10 digits) 10PF 512nF 100PF 5.12μF 1nF 51.2μF ±(2.5% of rdg + 5 digits) 10nF 100μF ±(5.0% of rdg + 10 digits) 100nF Overload protection: 250V DC/250Vrms AC 2.2.7 Frequency Range Accuracy Resolution Sensitivity 5.12Hz 0.001Hz 51.2Hz 0.01Hz 512Hz 0.1Hz 5.12kHz 1Hz 51.2kHz 10Hz 512kHz 100Hz 5.12MHz ± (0.1% of rdg + 5 digits) 1kHz Sine wave 0.6V～ 10V rms (5.12MHz: 1.5V～ 10V rms) If input voltage over range, need adjust Overload protection: 250V DC/250Vrms AC Duty cycle: 0.1%～99.9% 2.2.8 Temperature (NiCr-NiSi sensor) Range Accuracy Resolution -20~150°C ± ( 3°C+ 1digit ) °C 150~1000°C ± ( 3% of rdg + 2digits ) 1°C Overload protection: 250V DC/250Vrms AC ２ 2.2.9 Diode and Audible continuity test Range Description Test Condition Display read approximately forward voltage of diode For…

Text truncated - open the document above for the full version.

CONFIDENTIALITY REQUEST for Certification Service in USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21046 Date:<2022-7-27> Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we requests confidentiality for the following products: FCC ID Model name 2A7T4-HP-570C-APP HP-570C-APP For the product stated above, we request that the following information be held confidential; Exhibits Long-Term Confidentiality Short-Term Confidentiality Short-Term Confidentiality Days External Photos Internal Photos Block Diagram Schematics Test Setup Photos User’s Manual Parts List Tune Up Operational Descriptions The long-term confidentiality exhibits contain our trade secrets and proprietary information that could be of benefit to our competitors. The short-term confidentiality on the basis of ensuring that business sensitive information remains confidential until the actual marketing of our new device. If you have any questions, please feel free to contact me at the address shown below. Sincerely, Name/Title： Wei Bai/Manager Company: ZhuHai JiDa HuaPu Instrument Co.,Ltd Address: 3/F,Build 4,Qinghua Science Park Building, ,No.101 Universitiy Road,Tangjiawan Village Zhuhai Guangdong Phone: 86-756-3374032 Fax: 86-756-3374032 E-Mail: [email protected]

ZhuHai JiDa HuaPu Instrument Co.,Ltd 3/F,Build 4,Qinghua Science Park Building, ,No.101 Universitiy Road,Tangjiawan Village Zhuhai Guangdong Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 2022-7-27 To whom it may concern: We, the undersigned, hereby authorize Eurofins Product Service GmbH to act on our behalf in all matters relating to applications for equipment authorization FCC ID: 2A7T4-HP-570C-APP including the signing of all documents related to these matters. Any and all acts carried out by Eurofins Product Service GmbH on our behalf shall have the same effect as acts of our own. By signing this application form, we agree to Eurofins’ current valid General Terms and Conditions (AGB),Testing and Certification Regulations (PZO) which can be viewed on following website www.eurofins.de/ee or retrieved on request. We also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Sincerely, Name/Title： Wei Bai/Manager Company: ZhuHai JiDa HuaPu Instrument Co.,Ltd Address: 3/F,Build 4,Qinghua Science Park Building, ,No.101 Universitiy Road,Tangjiawan Village Zhuhai Guangdong Phone: 86-756-3374032 Fax: 86-756-3374032 E-Mail: [email protected]

Page 1 of 4 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8

Page 1 of 1 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L1.5cm x 1.0cm) Label Location CLAMP MULTIMETER Model: HP-570C-APP FCC ID: 2A7T4-HP-570C-APP

Page 1 of 3 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 3 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 3 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Antenna

Page 1 of 3 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information FCC ID : 2A7T4-HP-570C-APP Product name : CLAMP MULTIMETER Test Model : HP-570C-APP Power Supply : DC 9V by 6F22 Battery Hardware Version : / Software Version : / Bluetooth : 2402MHz ~ 2480MHz Channel Number : 40 channels for Bluetooth V4.2 (DTS) Channel Spacing : 2MHz for Bluetooth V4.2(DTS) Modulation Type : GFSK for Bluetooth V4.2 (DTS) Bluetooth Version : V4.2 Antenna Type : PCB Antenna Antenna Gain : 0dBi Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Portable Device 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.“ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below Page 2 of 3 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. When one of the following test exclusion conditions is satisfied for all combinations of simultaneous transmission configurations, further equipment approval is not required to incorporate transmitter modules in host devices that operate in the mixed mobile and portable host platform exposure conditions. The grantee is responsible for documenting this according to Class I permissive change requirements. Antennas that qualify for standalone SAR test exclusion must apply the estimated standalone SAR to determine simultaneous transmission test exclusion. a) The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. b)The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices 4. Conducted Power Results <BT LE> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) GFSK 0 2402 1.03 19 2440 1.14 39 2480 1.24 Page 3 of 3 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 5. Manufacturing Tolerance <BT LE> GFSK (Peak) Channel Channel 0 Channel 19 Channel 39 Target (dBm) 1.0 1.0 1.0 Tolerance ±(dB) 1.0 1.0 1.0 6. Evaluation Results 6.1 Standalone Evaluation Band/Mode f (GHz) Antenna Distance (mm) RF output power SAR Test Exclusion Threshold SAR Te…

Text truncated - open the document above for the full version.

Page 1 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for BLE (Conducted Measurement) Product Name: CLAMP MULTIMETER Test Model: HP-570C-APP Environmental Conditions Temperature: 23.5 C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Nick Peng Supervised by: Ling Zhu Page 2 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 6dB Bandwidth Condition Mode Frequency (MHz) Antenna 6 dB Bandwidth (MHz) Limit 6 dB Bandwidth (MHz) Verdict NVNT BLE 1M 2402 Ant1 0.682 >=0.5 Pass NVNT BLE 1M 2440 Ant1 0.67 >=0.5 Pass NVNT BLE 1M 2480 Ant1 0.683 >=0.5 Pass Page 3 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs 6dB Bandwidth NVNT BLE 1M 2402MHz Ant1 6dB Bandwidth NVNT BLE 1M 2440MHz Ant1 Page 4 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 6dB Bandwidth NVNT BLE 1M 2480MHz Ant1 Page 5 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT BLE 1M 2402 Ant1 1.03 30 Pass NVNT BLE 1M 2440 Ant1 1.14 30 Pass NVNT BLE 1M 2480 Ant1 1.24 30 Pass Page 6 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Power NVNT BLE 1M 2402MHz Ant1 Power NVNT BLE 1M 2440MHz Ant1 Page 7 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT BLE 1M 2480MHz Ant1 Page 8 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.3 Maximum Power Spectral Density Level Condition Mode Frequency (MHz) Antenna Conducted PSD (dBm/3kHz) Duty Factor (dB) Total PSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNT BLE 1M 2402 Ant1 -9.33 0 -9.33 8 Pass NVNT BLE 1M 2440 Ant1 -8.5 0 -8.5 8 Pass NVNT BLE 1M 2480 Ant1 -8.02 0 -8.02 8 Pass Page 9 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs PSD NVNT BLE 1M 2402MHz Ant1 PSD NVNT BLE 1M 2440MHz Ant1 Page 10 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity PSD NVNT BLE 1M 2480MHz Ant1 Page 11 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.4 Band Edge Condition Mode Frequency (MHz) Antenna Max Value (dBc) Limit (dBc) Verdict NVNT BLE 1M 2402 Ant1 -56.68 -20 Pass NVNT BLE 1M 2480 Ant1 -57.14 -20 Pass Page 12 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Band Edge NVNT BLE 1M 2402MHz Ant1 Ref Band Edge NVNT BLE 1M 2402MHz Ant1 Emission Page 13 of 23 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laborato…

Text truncated - open the document above for the full version.

Page 1 of 31 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For ZhuHai JiDa HuaPu Instrument Co.,Ltd CLAMP MULTIMETER Test Model: HP-570C-APP Prepared for : ZhuHai JiDa HuaPu Instrument Co.,Ltd Address : 3/F, Build 4, Qinghua Science Park Building, No.101 Universitiy Road, Tangjiawan Village, Zhuhai, China Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : June 29, 2022 Number of tested samples : 2 Sample No. : A061722124-1, A061722124-2 Serial number : Prototype Date of Test : June 29, 2022 ~ July 08, 2022 Date of Report : July 08, 2022 Page 2 of 31 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ................. : LCSA061722124EA Date of Issue .................................. : July 08, 2022 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : ZhuHai JiDa HuaPu Instrument Co.,Ltd Address .......................................... : 3/F, Build 4, Qinghua Science Park Building, No.101 Universitiy Road, Tangjiawan Village, Zhuhai, China Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.247) Test Report Form No.................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. .......................... : CLAMP MULTIMETER Trade Mark ..................................... : N/A Test Model ...................................... : HP-570C-APP Ratings ........................................... : DC 9V by 6F22 Battery Result ............................................ : Positive Compiled by: Supervised by: Approved by: Li Huan/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 31 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC -- TEST REPORT Test Model............................... : HP-570C-APP EUT......................................... : CLAMP MULTIMETER Applicant............................... : ZhuHai JiDa HuaPu Instrument Co.,Ltd Address.................................. : 3/F, Build 4, Qinghua Science Park Building, No.101 Universitiy Road, Tangjiawan Village, Zhuhai, China Telephone............................... : / Fax.......................................... : / Manufacturer........................ : ZhuHai JiDa HuaPu Instrument Co.,Ltd Address................................... : 3/F, Build 4, Qinghua Science Park Building, No.101 Universitiy Road, Tangjiawan Village, Zhuhai, China Telephone............................... : / Fax.......................................... : / Factory................................... : / Address................................... : / Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA061722124EA July 08, 2022 Date of issue Page 4 of 31 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 July 08, 2022 Initial Issue --- Page 5 of 31 FCC ID: 2A7T4-HP-570C-APP Report No.: LCSA061722124EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity TABLE OF CONTENTS 1. GEN…

Text truncated - open the document above for the full version.

Page 1 of 1 FCC ID: 2A7T4-HP-570C-APP Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-ce…

Text truncated - open the document above for the full version.