2A7UK-REINK600R1 Reader

(ShenzhenWiwoodTechnologyCo.,Ltd) (07/25/2023) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(i)requestfor(2A7UK-REINK600) [ShenzhenWiwoodTechnologyCo.,Ltd](“theapplicant”)certifiesthattheequipment forwhichauthorizationissoughtisnot“covered”equipmentprohibitedfromreceiving anequipmentauthorizationpursuanttosection2.903oftheFCCrules. Sincerely, (JieZhang ) ShenzhenWiwoodTechnologyCo.,Ltd (07/25/2023) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:AttestationStatementsPart2.911(d)(5)(ii)requestfor(2A7UK-REINK600) [ShenzhenWiwoodTechnologyCo.,Ltd](“theapplicant”)certifiesthat,asofthedate ofthefilingoftheapplication,theapplicantisnotidentifiedontheCoveredListasan entityproducing“covered”equipment. Sincerely, (JieZhang)

AttestationStatements (07/25/2023) TO:FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046,USA RE:AttestationStatementsPart2.911(d)(7)requestfor(2A7UK-REINK600) (ShenzhenWiwoodTechnologyCo.,Ltd),theundersigned,herebyauthorize(WeFa SelectionTradeTechnologyCo.,LTD )toactasourdesignatedU.S.agentforserviceofprocess,(ShenzhenWiwood TechnologyCo.,Ltd)acceptstomaintainanagentfornolessthanoneyearafterthe granteehasterminatedallmarketingandimportationortheconclusionofany Commission-relatedproceedinginvolvingtheequipment. (WeFaSelectionTradeTechnologyCo.,LTD )acceptstheresponsibilitytoactasdesignatedU.S.agentforserviceofprocess. ApplicantInformation： Companyname:ShenzhenWiwoodTechnologyCo.,Ltd ContactName:ZhangJie Address:Room502,BuildingF,HuafengInternationalRobotIndustrialPark,Hangcheng Avenue,Xixiang,Bao'an,Shenzhen,China TelephoneNo:13723428326 Email:[email protected] Signature [ZhangJie] U.S.AgentInformation: CompanyName:WeFaSelectionTradeTechnologyCo.,LTD Address:30N.GOULDST.STENSHERIDANWY,SHERIDAN,WY82801,UnitedStates FRN:0033767856 ContactName:JosonYe TelephoneNo:3023719847 Email:[email protected] Signature [JosonYe]

ShenzhenWiwoodTechnologyCo.,Ltd ModelConfirmationLetter We,ShenzhenWiwoodTechnologyCo.,Ltd (Companyname)certifytheproduct:R1Reader Andmodels:Reink600 、 Reink601 、 Reink602 、 Reink600C 、 Reink601C 、 Reink602C 、 Reink700 、 Reink701 、 Reink702 、 Reink700C 、 Reink701C 、 Reink702C Theirshellcolor,customernumberisdifferent;Itsinternalstructure,circuit principle,PCBwiringoftheproductandallthekeycomponentsrelatedtosafety andelectromagneticcompatibilityperformanceareidentical Signature: Printedname:JieZhang CompanyName:ShenzhenWiwoodTechnologyCo.,Ltd Date:2023/7/25

ShenzhenWiwoodTechnologyCo.,Ltd ( 07/25/2023 ) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:CONFIDENTIALITYREQUESTFOR( R1Reader / Reink600AND 2A7UK-REINK600 ) ToWhomItMayConcern: Thisletterservesasanofficialrequestforconfidentialityundersections0.457and0.459 ofCFR47.Wehaverequestedthatthe(Blockdiagram,circuitdiagram,operational description,BOM,PCBlayout)requiredtobesubmittedwiththisapplicationbe permanentlywithheldfrompublicreview. SPECIFYREASONFORREQUEST(i.e.theabovedocumentsarecompany proprietaryinformationthatcouldnevergetintothepossessionofyour competition). Pleasecontactmeifthereisanyinformationyoumayneed. Sincerely,

ShenzhenWiwoodTechnologyCo.,Ltd ( 07/25/2023 ) EurofinsElectricalandElectronicTestingNA,Inc. 914WestPatapscoAvenue Baltimore,MD21230 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorize(DongguanYaxu(AiT)TechnologyLimited)toactonour behalfinallmattersrelatingtoapplicationforequipmentauthorization,includingthesigningof alldocumentsrelatingtothesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothe denialofbenefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseAct of1988,21U.S.C.853(a). Thisagreementexpiresoneyearfromthecurrentdate. Sincerely,

Page 1 of 4 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. External Photos Photo 1 Photo 2 Page 2 of 4 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Page 3 of 4 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 4 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 ------End------

Labellocation

Page 1 of 7 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Internal Photos Photo 1 Photo 2 Page 2 of 7 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 3 Photo 4 Antenna Page 3 of 7 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 5 Photo 6 Page 4 of 7 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 7 Photo 8 Page 5 of 7 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 9 Photo 10 Page 6 of 7 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 11 Photo 12 Page 7 of 7 FCC ID: 2A7UK-REINK600 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. Photo 13 ------End------

RF Exposure evaluation FCC ID: 2A7UK-REINK600 1.1. Applicable Standard According to §1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission’s guidelines. According to §1.1310 and §2.1093 RF exposure requirement KDB447498 v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies 1.2. Requirement According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.23 “ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. Page 2 of 2 1.3. Manufacturing tolerance BLE Frequency (MHz) GFSK 2402 2440 2480 Target (dBm) 2.0 2.0 2.0 Tolerance ± (dB) 1.0 1.0 1.0 2.4GWIFI Frequency (MHz) 11B 2412 2437 2462 Target (dBm) 2.0 2.0 2.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11G 2412 2437 2462 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 Frequency (MHz) 11N20 2412 2437 2462 Target (dBm) 1.0 1.0 1.0 Tolerance ± (dB) 1.0 1.0 1.0 2. Evaluation Result Evaluation Results Band/Mode f (GHz) Antenna Distance (mm) Max.RF output power (including tune-up tolerance) SAR Test Exclusion Threshold SAR Test Exclusion dBm mW BLE 2.5 5 3 1.995 0.6310<3.0 Yes 2.4GHz WIFI 2.5 5 3 1.995 0.6310<3.0 Yes 3. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06 .....................End of Report.........................

Page 2 of 36 Report No.: AIT23071001FW1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS .................................................................................................................................................................... 2 2 TEST SUMMARY .......................................................................................................................................................... 4 2.1 Statement of the Measurement Uncertainty ................................................................................ 4 2.2 Measurement Uncertainty ........................................................................................................... 4 3 TEST FACILITY ............................................................................................................................................................. 5 3.1 Deviation from standard .............................................................................................................. 5 3.2 Abnormalities from standard conditions ...................................................................................... 5 3.3 Test Location ............................................................................................................................... 5 4 GENERAL INFORMATION ......................................................................................................................................... 6 4.1 Test frequencies .......................................................................................................................... 7 4.2 EUT Peripheral List ..................................................................................................................... 7 4.3 Test Peripheral List ...................................................................................................................... 7 4.4 TEST METHODOLOGY .............................................................................................................. 8 4.5 Description of Test Modes ........................................................................................................... 9 5 EQUIPMENT USED DURING TEST ........................................................................................................................ 10 6 TEST RESULTS AND MEASUREMENT DATA .................................................................................................... 11 6.1 Antenna requirement ................................................................................................................. 11 6.2 On Time and Duty Cycle ........................................................................................................... 12 6.3 Maximum Conducted Output Peak Power Measurement ......................................................... 13 6.4 6 dB Spectrum Bandwidth Measurement .................................................................................. 15 6.5 Power Spectral Density ............................................................................................................. 16 6.6 Conducted Spurious Emissions and Band Edges Test ............................................................. 18 6.7 Restrict-band Band-edge Measurements ................................................................................. 20 6.8 Radiated Emissions Measurement ........................................................................................... 20 6.9 Conducted Emissions ................................................................................................................ 33 7 TEST SETUP PHOTOGRAPHS OF EUT ................................................................................................................ 36 8 EXTERNAL PHOTOGRAPHS OF EUT ................................................................................................................... 36 9 INTERNAL PHOTOGRAPHS OF EUT .................................................................................................................... 36 Page 3 of 36 Report No.: AIT23071001FW1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. REPORT REVISE RECORD Report Version Revise Time Issued Date Valid Version Notes V1.0 / July 18, 2023 Valid Initial release Page 4 of 36 Report No.: AIT23071001FW1 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 2 Test Summary Test Item Section in CFR 47 Result Antenna requirement §15.203 Pass On Time and Duty Cycle / / Maximum Conducted Peak Output Power §15.247 (b)(3) Pass Power Spectral Density §15.247 (e) Pass 6dB Bandwidth §15.247 (a)(2) Pass Radiated Spurious Emissions §15.205/15.209 PASS Emissions at Restricted Band §15.205/15.209 Pass Conducted Spurious Emissions and Band Edges Emissions §15.205, §15.247(d) Pass AC Mains Conducted Emissions §15.207(a) Pass Note 1. Test according to ANSI C63.10:2013. 2. The measurement uncertainty is not included in the test result. 3. Test results in other test report (RF Exposure Evaluation Report) 2.1 Statement of the Measurement Uncertainty The data and results referenced in this document are true and accurate. The reader is cautioned that there may be errors within the calibration limits of the equipment and facilities. The measurement uncertainty was calculated for all measurements listed in this test report acc. To CISPR 16 – 4 “Specification for radio disturbance and immunity measuring apparatus and methods – Part 4: Uncertainty in EMC Measurements” and is documented in the AiT quality system acc. To DIN EN ISO/IEC 17025. Furthermore, component and process variability of devices similar to that tested may result in additional deviation. The manufacturer has the sole responsibility of continued compliance of the…

Text truncated - open the document above for the full version.

Page 2 of 39 Report No.: AIT23071001FW2 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqianling 3rd Street, Jitigang, Huangjiang, Dongguan, Guangdong, China. 1 Contents Page COVER PAGE 1 CONTENTS ......................................................................................................................................................................... 2 2 TEST SUMMARY ............................................................................................................................................................... 5 2.1 Statement of the Measurement Uncertainty ....................................................................................... 5 2.2 Measurement Uncertainty ................................................................................................................... 5 3 TEST FACILITY .................................................................................................................................................................. 6 3.1 Deviation from standard ...................................................................................................................... 6 3.2 Abnormalities from standard conditions .............................................................................................. 6 3.3 Test Location ....................................................................................................................................... 6 4 GENERAL INFORMATION .............................................................................................................................................. 7 4.1 Test frequencies .................................................................................................................................. 8 4.2 EUT Peripheral List ............................................................................................................................. 8 4.3 Test Peripheral List ............................................................................................................................. 8 4.4 TEST METHODOLOGY ..................................................................................................................... 9 4.5 Description of Test Modes ................................................................................................................. 10 5 EQUIPMENT USED DURING TEST ............................................................................................................................. 11 6 TEST RESULTS AND MEASUREMENT DATA ......................................................................................................... 12 6.1 Antenna requirement ......................................................................................................................... 12 6.1.1 Standard requirement: ............................................................................................................ 12 6.1.2 EUT Antenna: ......................................................................................................................... 12 6.2 On Time and Duty Cycle ................................................................................................................... 13 6.2.1 Standard requirement: ............................................................................................................ 13 6.2.2 Measuring Instruments and Setting: ....................................................................................... 13 6.2.3 Test Procedures ................................................................................................ ...................... 13 6.2.4 Test Setup Layout ................................................................................................................... 13 6.2.5 EUT Operation during Test ..................................................................................................... 13 6.2.6 Test result ................................................................................................................................ 13 6.3 Maximum Conducted Output Peak Power Measurement ................................................................ 14 6.3.1 Standard requirement: ............................................................................................................ 14 6.3.2 Measuring Instruments: .......................................................................................................... 14 6.3.3 Test Procedures: ..................................................................................................................... 14 6.3.4 Test Setup Layout ................................................................................................................... 14 6.3.5 EUT Operation during Test ..................................................................................................... 14 6.3.6 Test result ................................................................................................................................ 14 6.4 6 dB Spectrum Bandwidth Measurement ......................................................................................... 15 6.4.1 Standard requirement: ............................................................................................................ 15 6.4. 2 Measuring Instruments: .......................................................................................................... 15 6.4.3 Test Procedures ...................................................................................................................... 15 6.4.4 Test Setup Layout ................................................................................................................... 15 6.4.5 EUT Operation during Test ..................................................................................................... 15 Page 3 of 39 Report No.: AIT23071001FW2 Dongguan Yaxu (AiT) Technology Limited No.22, Jinqian…

Text truncated - open the document above for the full version.

深圳勤新科技有限公司 天线测试报告 客户型号/ Customer 86T-WiFi-V1.1 日期/Date：2023年07月01日 项目负责人: 黄文博（15981667202） 深圳勤新科技有限公司 •天线特性使用ETS测试系统微波暗室，微波暗室尺寸7m x 4m x 3m ，测试频率700MHz---6GHz. •S11 测试使用Agilent E5071B 网络分析仪 测试环境 微波暗室 Agilent E5071B 网络分析仪 深圳勤新科技有限公司 Ø客户案号:86T-WiFi-V1.1 Ø天线频段: Ø2.4GWiFi 项目说明 深圳勤新科技有限公司 调试版本记录 版本日期概述 V12023.5.19 试产机测试数据 V22023.6.15 项目优化数据 V32023.7.1 增加无源数据 V4 V5 V6 深圳勤新科技有限公司 项目图片 深圳勤新科技有限公司 天线驻波图S11 频段VSWR 24001.9 25002.2 深圳勤新科技有限公司 天线暗室3D测试数据 CHannelTRPTIS 2.4G 802.11B- 11Mbps 110.42-81.3 710.82-81.6 1111.13-81.8 深圳勤新科技有限公司 240040.571.68 241041.041.86 242044.122.37 243045.192.74 244045.942.99 245045.743.14 246041.962.93 247039.462.72 248041.083.01 249042.53.27 250041.733.28 Passive Test For WII2.4 FreqEffiGain (MHz)(%)(dBi) 天线暗室无源测试数据 深圳勤新科技有限公司 天线暗室无源测试数据 深圳勤新科技有限公司 天线装贴及实测性能 深圳勤新科技有限公司 描述： 总结： 1.以上为86T项目测试数据 2.天线匹配：未更改 3.环境处理：未更改 4.以目前有源数据来分析，天线性能OK。 深圳勤新科技有限公司 天线规格图档

Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 1 of 24 Appendix B RF Test Data for BT (BLE) (Conducted Measurement) Product Name: R1 Reader Trade Mark: Reinkstone Test Model: Reink600 Environmental Conditions Temperature: 25.5° C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Simba Huang Supervised by: Seal Chen Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 2 of 24 Contents Page COVER PAGE 1 Duty Cycle....................................................................................................................................................................................... 3 1.1 Test Result .......................................................................................................................................................................... 3 1.2 Test Graphs ......................................................................................................................................................................... 4 2 Maximum Conducted Output Power ................................................................................................................................................ 6 2.1 Test Result .......................................................................................................................................................................... 6 2.2 Test Graphs ......................................................................................................................................................................... 7 3 -6dB Bandwidth ............................................................................................................................................................................... 9 3.1 Test Result .......................................................................................................................................................................... 9 3.2 Test Graphs ....................................................................................................................................................................... 10 4 Maximum Power Spectral Density Level ........................................................................................................................................ 12 4.1 Test Result ........................................................................................................................................................................ 12 4.2 Test Graphs ....................................................................................................................................................................... 13 5 Band Edge .................................................................................................................................................................................... 15 5.1 Test Result ........................................................................................................................................................................ 15 5.2 Test Graphs ....................................................................................................................................................................... 16 6 Conducted RF Spurious Emission ................................................................................................................................................. 18 6.1 Test Result ........................................................................................................................................................................ 18 6.2 Test Graphs ....................................................................................................................................................................... 19 7 Restrict Band ................................................................................................................................................................................ 22 7.1 Test Result ........................................................................................................................................................................ 22 7.2 Test Graphs ....................................................................................................................................................................... 23 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 3 of 24 1 Duty Cycle 1.1 Test Result Mode Frequency (MHz) Duty Cycle (%) 1/T (kHz) BLE 1M 2402 65.59 2.56 BLE 1M 2440 66.39 2.56 BLE 1M 2480 66.39 2.56 Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 4 of 24 1.2 Test Graphs Test Graphs BLE 1M 2402MHz BLE 1M 2440MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 5 of 24 BLE 1M 2480MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 6 of 24 2 Maximum Conducted Output Power 2.1 Test Result Mode Frequency (MHz) Conducted Power (dBm) Limit (dBm) Verdict BLE 1M 2402 1.91 30 Pass BLE 1M 2440 1.91 30 Pass BLE 1M 2480 1.67 30 Pass Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 7 of 24 2.2 Test Graphs Test Graphs BLE 1M 2402MHz BLE 1M 2440MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 8 of 24 BLE 1M 2480MHz Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 9 of 24 3 -6dB Bandwidth 3.1 Test Result Mode Frequency (MHz) -6 dB Bandwidth (MHz) Limit -6 dB Bandwidth (MHz) Verdict BLE 1M 2402 0.708 0.5 Pass BLE 1M 2440 0.699 0.5 Pass BLE 1M 2480 0.692 0.5 Pass Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW1 FCC ID: 2A7UK-REINK600 Page 10 of 24 3.2 Test Graphs Test Graphs BLE 1M 2402MHz BLE 1M 2440MHz Dong…

Text truncated - open the document above for the full version.

Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW2 FCC ID: 2A7UK-REINK600 Page 1 of 46 Appendix C RF Test Data for 2.4GWIFI (Conducted Measurement) Product Name: R1 Reader Trade Mark: Reinkstone Test Model: Reink600 Environmental Conditions Temperature: 25.5° C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Simba Huang Supervised by: Seal Chen Dongguan Yaxu(AiT) Technology Limited Report No.: AIT23071001FW2 FCC ID: 2A7UK-REINK600 Page 2 of 46 Contents Page COVER PAGE 1 Duty Cycle....................................................................................................................................................................................... 3 1.1 Te s t Result .......................................................................................................................................................................... 3 1.2 Test Graphs ......................................................................................................................................................................... 4 2 Maximum Conducted Output Power ................................................................................................................................................ 9 2.1 Test Result ....................................…

Text truncated - open the document above for the full version.