2A7UQ-NYC1Payment Terminal

Adyen NYC1 and NYC1-SCR User Manual NYC1/NYC1-SCR USER MANUAL 2 THE INFORMATION IN THIS DOCUMENT CANNOT BE REPRODUCED IN ANY MECHANICAL, ELECTRICAL OR ELECTRONIC WAY AND UNDER ANY CIRCUMSTANCES WITHOUT THE WRITTEN CONSENT FROM Adyen NV. Address: Simon Carmiggeltstraat 6-50, Amsterdam, 1011 DJ, Netherlands Phone: +31621161626 NYC1/NYC1-SCR USER MANUAL 3 REVISION HISTORY Version Data Change description 1.0.0 13.06.2022 Release version 1.1.0 02.08.2022 Updated section “SERVICE AND SUPPORT” 1.2.0 23.09.2022 Updated section “REGULATORY” 1.3.0 14.10.2022 Added NYC1 1.4.0 16.11.2022 Updated section “TECHNICAL SPECIFICATIONS” 1.5.0 17.11.2022 Updated section “REGULATORY” NYC1/NYC1-SCR USER MANUAL 4 CONTENTS REGULATORY ........................................................................................................................................................................... 5 TECHNICAL SPECIFICATIONS ................................................................................................................................................... 6 GENERAL VIEW ........................................................................................................................................................................ 7 GETTING STARTED ................................................................................................................................................................... 8 PERIODIC INSPECTION AND MAINTENANCE .......................................................................................................................... 9 OPERATION MODES .............................................................................................................................................................. 10 APPLICATION/FIRMWARE DOWNLOAD MODE, SYSTEM MODE AND CLEARING BLUETOOTH PARING INFO ................................................. 10 STATUS LEDS ........................................................................................................................................................................ 10 BLUETOOTH PAIRING .............................................................................................................................................................. 12 UPDATE FIRMWARE AND APPLICATION WITH USING FIRMWARE API ................................................................................................ 13 MAGNETIC CARDS READING ..................................................................................................................................................... 14 CONTACTLESS CARDS READING .................................................................................................................................................. 15 SMART CARDS READING ........................................................................................................................................................... 16 CARE, MAINTENANCE AND WARRANTY............................................................................................................................... 17 SERVICE AND SUPPORT ......................................................................................................................................................... 17 NYC1/NYC1-SCR USER MANUAL 5 REGULATORY FCC Statement FCC ID: 2A7UQ-NYC1 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. RF Exposure Information The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. NYC1/NYC1-SCR USER MANUAL 6 TECHNICAL SPECIFICATIONS Processor ARM Cortex® M4 Security Microcontroller Memory 32KB I&D-Cache 1MB Internal RAM 8КB OTP Application Memory 8MB Serial Flash Keypad • ON / OFF key Magnetic Card Reader (For MSR version) • 3-track bi-directional reading • ISO 7810, 7811 and 7813 Smart Card Reader ISO7816, EMV L1 certified Contactless Card Reader for payment applications (option) • AMEX ExpressPay • Discover D-PAS • MasterCard Contactless • VISA PayWave • China Union Pay • JCB Contactless Card Reader • NFC-A/ISO 14443 Type-A • NFC-B/ISO 14443 Type-B • NFC-F/Felica • NFC-V/ISO 15693 Battery Rechargeable lithium-ion polymer battery 3.8V, 500mAh Connectivity • USB (from USB type C port or rear pads) - Device • BLE 5.1 • UART pass through rear pads Audio indication Speaker (power 0.5W) OS compatibility iOS, Android, Windows Reliability • 500 000 chip card cycles Certifications CE Mark, UCKA Mark, FCC, EMV Level 1, EMV Level 2, EMV…

Text truncated - open the document above for the full version.

Adyen N.V. Agent Authorization Company: Adyen N.V. Address: Simon Carmiggeltstraat 6-50, Amsterdam, Netherlands Product Name: Payment Terminal Trade Mark: N/A Model Number(s): NYC1, NYC1-SCR FCC ID: 2A7UQ-NYC1 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: Name: Roelant Prins Title: CCO Company: Adyen N.V.

Adyen N.V. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Subject; Request for Confidentiality FCC ID: 2A7UQ-NYC1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Title: DocuSign Envelope ID: DBC41638-FEC1-4F5F-AA40-EB66B30307D1 Roelant Prins 12/15/2022 | 07:39 CET Chief Commercial Officer

DocuSign Envelope ID: 7A4B7928-4089-4071-98D3-0F2D8BA8478D Roelant Prins 01/02/2023 | 17:48 CET Chief Commercial Officer

Page 1 of 4 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7

Page 1 of 1 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity LABEL AND LOCATION (Size: L5.5cm x 5.5cm) Label Location Payment Terminal Model: NYC1 FCC ID: 2A7UQ-NYC1

Page 1 of 6 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Internal Photos of the EUT Fig. 1 Fig. 2 Page 2 of 6 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 6 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 6 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7 Fig. 8 BT Antenna Page 5 of 6 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 9 Fig. 10 Page 6 of 6 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 11 NFC Antenna

Page 1 of 4 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information FCC ID : 2A7UQ-NYC1 Product name : Payment Terminal Test Model : NYC1 Additional Model No. : NYC1-SCR Model Declaration : The PCB board, structure and interior of these models are the same. Only the name is different between different models, so there is no additional model for testing Power supply : Input: DC 5V, 0.5A DC 3.8V by Rechargeable Li-ion Polymer Battery, 500mAh Bluetooth : 2402MHz-2480MHz Channel Number : 40 channels for Bluetooth V5.1 (BT LE/BT 2LE) Channel Spacing : 2MHz for Bluetooth V5.1 (BT LE/BT 2LE) Modulation Type : GFSK for Bluetooth V5.1 (BT LE/BT 2LE) Bluetooth Version : V5.1 Antenna Type : Internal Antenna Antenna Gain : 3.12dBi(Max.) Hardware version : 51A1xxxxxxxx / 61A1xxxxxxxx Software version : 3.0.xx.xx Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Portable Device Page 2 of 4 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.“ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. When one of the following test exclusion conditions is satisfied for all combinations of simultaneous transmission configurations, further equipment approval is not required to incorporate transmitter modules in host devices that operate in the mixed mobile and portable host platform exposure conditions. The grantee is responsible for documenting this according to Class I permissive change requirements. Antennas that qualify for standalone SAR test exclusion must apply the estimated standalone SAR to determine simultaneous transmission test exclusion. a) The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. b)The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices Page 3 of 4 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 4. Conducted Power Results [BLE Max Conducted Power] Mode Channel Frequency (MHz) Peak Conducted Output Power (d…

Text truncated - open the document above for the full version.

Page 1 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for BT LE (Conducted Measurement) Product Name: Payment Terminal Test Model: NYC1 Environmental Conditions Temperature: 23.8°C Relative Humidity: 52.2% ATM Pressure: 100.0 kPa Test Engineer: Joker Hu Supervised by: Li Huan Page 2 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 DTS Bandwidth Test Result TestMode Antenna Channel DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 0.688 2401.676 2402.364 0.5 PASS 2440 0.680 2439.676 2440.356 0.5 PASS 2480 0.680 2479.676 2480.356 0.5 PASS BLE_2M Ant1 2402 1.052 2401.484 2402.536 0.5 PASS 2440 1.040 2439.484 2440.524 0.5 PASS 2480 1.044 2479.484 2480.528 0.5 PASS Page 3 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 4 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page 5 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity BLE_2M_Ant1_2480 Page 6 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Occupied Channel Bandwidth Test Result TestMode Antenna Channel OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict BLE_1M Ant1 2402 1.0553 2401.475 2402.530 --- --- 2440 1.0687 2439.467 2440.536 --- --- 2480 1.0744 2479.462 2480.536 --- --- BLE_2M Ant1 2402 2.0930 2400.967 2403.060 --- --- 2440 2.0524 2438.986 2441.038 --- --- 2480 2.0462 2478.989 2481.035 --- --- Page 7 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 8 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page 9 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity BLE_2M_Ant1_2480 Page 10 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.3 Maximum peak conducted output power Test Result TestMode Antenna Channel Result[dBm] Limit[dBm] Verdict BLE_1M Ant1 2402 5.43 ≤30 PASS 2440 5.04 ≤30 PASS 2480 5.01 ≤30 PASS BLE_2M Ant1 2402 5.44 ≤30 PASS 2440 5.10 ≤30 PASS 2480 5.06 ≤30 PASS Page 11 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs BLE_1M_Ant1_2402 BLE_1M_Ant1_2440 BLE_1M_Ant1_2480 Page 12 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity BLE_2M_Ant1_2402 BLE_2M_Ant1_2440 Page 13 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity BLE_2M_Ant1_2480 Page 14 of 39 FCC ID: 2A7UQ-NYC1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: webmaster@l…

Text truncated - open the document above for the full version.

Page 1 of 34 FCC ID: 2A7UQ-NYC1 Report No.: LCSA070522006EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT For Adyen N.V. Payment Terminal Test Model: NYC1 Additional Model No.: NYC1-SCR Prepared for : Adyen N.V. Address : Simon Carmiggeltstraat 6-50, Amsterdam, Netherlands Prepared by : Shenzhen LCS Compliance Testing Laboratory Ltd. Address : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel : (+86)755-82591330 Fax : (+86)755-82591332 Web : www.LCS-cert.com Mail : [email protected] Date of receipt of test sample : July 05, 2022 Number of tested samples : 2 Sample No. : A070522006-1, A070522006-2 Serial number : Prototype Date of Test : July 05, 2022 ~ July 11, 2022 Date of Report : July 22, 2022 Page 2 of 34 FCC ID: 2A7UQ-NYC1 Report No.: LCSA070522006EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC TEST REPORT FCC CFR 47 PART 15 C(15.247) Report Reference No. ................. : LCSA070522006EA Date of Issue .................................. : July 22, 2022 Testing Laboratory Name ............ : Shenzhen LCS Compliance Testing Laboratory Ltd. Address .......................................... : 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Testing Location/ Procedure .......... : Full application of Harmonised standards ■ Partial application of Harmonised standards □ Other standard testing method □ Applicant’s Name ......................... : Adyen N.V. Address .......................................... : Simon Carmiggeltstraat 6-50, Amsterdam, Netherlands Test Specification Standard ......................................... : FCC CFR 47 PART 15 C(15.247) Test Report Form No.................... : LCSEMC-1.0 TRF Originator ................................ : Shenzhen LCS Compliance Testing Laboratory Ltd. Master TRF ..................................... : Dated 2011-03 Shenzhen LCS Compliance Testing Laboratory Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen LCS Compliance Testing Laboratory Ltd. is acknowledged as copyright owner and source of the material. Shenzhen LCS Compliance Testing Laboratory Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. EUT Description. .......................... : Payment Terminal Trade Mark ..................................... : N/A Test Model ...................................... : NYC1 Ratings ........................................... : Input: DC 5V, 0.5A DC 3.8V by Rechargeable Li-ion Polymer Battery, 500mAh Result ............................................ : Positive Compiled by: Supervised by: Approved by: Kay Hu/ Administrator Cary Luo/ Technique principal Gavin Liang/ Manager Page 3 of 34 FCC ID: 2A7UQ-NYC1 Report No.: LCSA070522006EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC -- TEST REPORT Test Model............................... : NYC1 EUT......................................... : Payment Terminal Applicant............................... : Adyen N.V. Address.................................. : Simon Carmiggeltstraat 6-50, Amsterdam, Netherlands Telephone............................... : / Fax.......................................... : / Manufacturer........................ : Datecs Ltd. Address................................... : 4 Datecs Street, Sofia 1592, Bulgaria Telephone............................... : / Fax.......................................... : / Factory................................... : Datecs Ltd. Address................................... : 4 Datecs Street, Sofia 1592, Bulgaria Telephone............................... : / Fax.......................................... : / Test Result Positive The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Test Report No. : LCSA070522006EA July 22, 2022 Date of issue Page 4 of 34 FCC ID: 2A7UQ-NYC1 Report No.: LCSA070522006EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Revision History Report Version Issue Date Revision Content Revised By 000 July 22, 2022 Initial Issue -- Page 5 of 34 FCC ID: 2A7UQ-NYC1 Report No.: LCSA070522006EA Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxuezi…

Text truncated - open the document above for the full version.