2A7YB-SR1Smart watch

SR1 User Instructions Please read the instructions before use: ●The company reserves the right to revise the contents of this notice without prior notice. Under normal circumstances, some functions differ in specific software versions. ●The product should be charged for more than 2 hours before use, but avoid long-term charging in an unattended environment when charging. ●Please attach the magnetic charging cable to the charging port of the bracelet automatically. ●Please use the input voltage: 5V/1A charging head, with the original charging cable provided by the manufacturer. ●Before using the product, please download the login application to your mobile phone and set your personal information. ●It is forbidden to use the car charger to charge (the car voltage is unstable when the car is turned off). APP download login ●APP download method "OnWear Pro": 1. Apple mobile phones can be downloaded from the App Store; 2. Android phones can be downloaded from Google play store and App Store; 3. Or scan the QR code in the watch to download the APP (compatible: IOS12.0 or above /Android6.0 or above); ●To install the APP, please follow the interface prompts to register and log in, and you need to turn on Bluetooth; ●Select the Bluetooth name SR1 on the APP device interface to bind. After the binding is successful, the BT binding interface pops up on the phone. Please click Allow Bluetooth pairing. Watch calls and other functions can be used normally. How to operate ●In the dial interface, draw from top to bottom, Enter the shortcut interface ●In the dial interface, draw from bottom to top, Enter the information list interface ●In the dial interface, draw from left to right, Enter the function menu list interface ●In the dial interface, draw from right to left, Enter steps, heart rate, sleep and other interfaces More function introduction: Frequent contacts Adding commonly used contacts through the app, contact information will be synchronized to the watch side, clicking the contact person to dial. Dial After connecting the APP, match the watch BT Bluetooth with the mobile phone, the Bluetooth display connection state, you can call from the watch. Call log If there is an incoming call after connecting BT Bluetooth, the incoming call information will be saved in the call record. Click the record to make a call. Motion data Swipe the touch screen from the right to the left, enter the sports data interface, and check the data of the day: the number of steps, distance, calories. Information After the watch is connected to the mobile app, the newly popped information of the mobile phone will be pushed to the watch end simultaneously. The watch will store multiple pieces of information. Language assistant After the watch is connected to the mobile phone app, light the voice ball to wake up the voice assistant. Heart rate monitoring Heart rate measurement：The bottom green light starts to measure, and the measurement is completed in about 30 to 60 seconds. At this time, the measurement value is based on PPG technology measurement. Blood oxygen monitoring Blood oxygen measurement：The red light at the bottom starts to measure, and the measurement is completed in about 30 to 60 seconds. At this time, the measurement value is based on PPG technology measurement. Sleep monitoring Display the sleep monitoring status of the day, the data is updated every day, and the specific data can be used to the APP to view. Motion mode Enter the interface to carry out various sports modes: outdoor walking, outdoor running, outdoor cycling, mountain climbing, basketball, rope skipping, football, cricket, badminton, elliptical machine, baseball, swimming, rowing machine, yoga, free training. Sports record Sports record can view the sports data you have exercised: duration, distance, calories, pace, etc. Alarm clock Find the alarm function in the list and add alarm clock according to the corresponding settings. Weather After the watch is connected to the mobile app, the weather will automatically synchronize to the watch end. Secondary watch Stopwatch timing - click the triangle to start, click the left button to pause, and then click the right button to restore. Timer The timer function -After selecting the corresponding time, open the timer, and the timer end the vibration reminder. Music Music function-After connecting the app, open the music player to control the playback of music. Camera After the watch is connected to the phone, turn on the camera, click to take a picture, and the photo will be saved in the phone. Respiratory training Choose the corresponding time and follow the interface to inhale and exhale to achieve the purpose of practice. Find your phone After the watch is connected to the mobile phone, click to find the mobile phone, and the mobile phone will give a vibration prompt. Female health Women's Health: APP on the link needs to set the gender to women in the app. According to the prompts of physiological health, the watch will prompt the corresponding state. Dial switch Can be selected for dials, which can be switched by long pressing dial to support push dial (multiple dial built -in watches). Style Menu style: Adjust the menu style selection in the watch settings, and the menu style supports the list style, simple style, and nine grid mode. Turn off Long press the button for 3 seconds to turn on. The watch will automatically turn on when charging. Click the shutdown icon to shut down. System message View information about the Bluetooth name, MAC address, firmware version number and other information of the watch. Restore Factory It is confirmed that the restoration of the factory setting will clear all personal data. Product parameters Please read this manual first to ensure safety and correct use: ●The data of this product is for health management reference only. Please do not serve as medical data. If you find abnormal physical data, you should prevail for hospital testing. ●The waterproof level of …

Text truncated - open the document above for the full version.

2.911 (d)(7)USA Agent v1.2 Section 2.911(d)(7) USA Agent for Service of Process Company name: Shenzhen Parsonver Trading Co., Ltd Address:Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen Product Name:Smart watch FCCID: 2A7YB-SR1 Model(s): 2.911(d)(7) USA Designated Agent for Service of Process We, [Shenzhen Parsonver Trading Co., Ltd] (“the applicant”) designate [Mambate USA Inc.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Company name: Mambate USA Inc. Address: 7708 18th Ave Brooklyn, New York, NY 11214-1110 United States FRN: 0031977135 Contact Name: Mr Richard Wang Telephone No: (1) 212-9212 Email: [email protected] Applicant Company name: Shenzhen Parsonver Trading Co., Ltd Address: Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen Contact Name: Elena Li Telephone No: 17302681953 Email:[email protected] Signature: Title:Manager Signature: Title: Finance Supervisor Date:2023.03.15 Date: 2023.03.15 2.911 (d)(7)USA Agent v1.2 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-th e-communications-supply-chain-through-the

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Shenzhen Parsonver Trading Co., Ltd Address: Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street,Longgang District, Shenzhen, China Phone: +86-17302681953 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-06-28 Name / Title: Elena Li / Finance Supervisor Company: Shenzhen Parsonver Trading Co., Ltd Address: Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Phone: +86-17302681953 Fax: N/A E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2A7YB-SR1 SR1, SR2, SR3 We, applicant Company Name: Shenzhen Parsonver Trading Co., Ltd Address: Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street,Longgang District, Shenzhen, China Phone: +86-17302681953 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-06-28 Name / Title: Elena Li / Finance Supervisor Company: Shenzhen Parsonver Trading Co., Ltd Address: Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Phone: +86-17302681953 Fax: N/A E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2A7YB-SR1 SR1, SR2, SR3 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are: • the Operational Description • the Block Diagram • the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-06-28 Name / Title: Elena Li / Finance Supervisor Company: Shenzhen Parsonver Trading Co., Ltd Address: Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Phone: +86-17302681953 Fax: N/A E-Mail: [email protected]

Shenzhen Parsonver Trading Co., Ltd Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street,Longgang District, Shenzhen, China Date: June 28, 2023 FCC ID: 2A7YB-SR1 Model Number: SR1, SR2, SR3 To: Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21048 To Whom It May Concern, We, Shenzhen Parsonver Trading Co., Ltd hereby declare that our product (Smart watch) Model Number: SR1, SR2, SR3 board, Schematic, Hardware version, Software version, structure and internal photos are same, named differently due to marketing purposes. Should you have any questions or comments regarding this matter, please have my best attention. Sincerely, (Signed) Name/Title: Elena Li / Finance Supervisor Company: Shenzhen Parsonver Trading Co., Ltd Address: Room 602, No. 228, Hekan North Road, Wuhe Community, Bantian Street, Longgang District, Shenzhen, China Tel: +86-17302681953 Fax: N/A E-Mail: [email protected]

Page 1 of 4 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity External Photos of the EUT Fig. 1 Fig. 2 Page 2 of 4 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 3 Fig. 4 Page 3 of 4 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 5 Fig. 6 Page 4 of 4 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Fig. 7

Page 1 of 1 FCC ID: 2A7YB-SR1 _____________________________________________________________________________________________________ This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd.. Page 1 of 1 LABEL AND LOCATION (Size: L 2.0cm x W 1.0cm) Label Location Smart watch Model: SR1 FCC ID: 2A7YB-SR1

Page 1 of 4 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity FCC RF Exposure Evaluation 1. Product Information FCC ID : 2A7YB-SR1 Product name : Smart watch Test Model : SR1 Additional Model No. : SR2, SR3 Model Declaration : PCB board, structure and internal of these model(s) are the same, So no additional models were tested Power Supply : Input: 5V1A Battery: 3.8V250mAh Hardware Version : V1.2 Software Version : V0.11 Frequency Range : 2402MHz ~ 2480MHz Channel Number : 79 channels for Bluetooth V4.2 (DSS) 40 channels for Bluetooth V4.2 (DTS) Channel Spacing : 1MHz for Bluetooth V4.2 (DSS) 2MHz for Bluetooth V4.2 (DTS) Modulation Type : GFSK, π/4-DQPSK, 8-DPSK for Bluetooth V4.2 (DSS) GFSK for Bluetooth V4.2 (DTS) Bluetooth Version : V4.2 Antenna Type : Monopole Antenna Antenna Gain : -6.88dBi Exposure category : General population/uncontrolled environment EUT Type : Production Unit Device Type : Portable Device Page 2 of 4 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 2. Evaluation method and Limit According to KDB447498 D01 General RF Exposure Guidance v06 Section 4.3.1 Standalone SAR test exclusion considerations: “Unless specifically required by the published RF exposure KDB procedures, standalone 1-g head or body and 10-g extremity SAR evaluation for general population exposure conditions, by measurement or numerical simulation, is not required when the corresponding SAR Test Exclusion Threshold condition, listed below, is satisfied. These test exclusion conditions are based on source-based time-averaged maximum conducted output power of the RF channel requiring evaluation, adjusted for tune-up tolerance, and the minimum test separation distance required for the exposure conditions.22 The minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander (see 5) of section 4.1). To qualify for SAR test exclusion, the test separation distances applied must be fully explained and justified by the operating configurations and exposure conditions of the transmitter and applicable host platform requirements, typically in the SAR measurement or SAR analysis report, according to the required published RF exposure KDB procedures. When no other RF exposure testing or reporting is required, a statement of justification and compliance must be included in the equipment approval, in lieu of the SAR report, to qualify for the SAR test exclusion. When required, the device specific conditions described in the other published RF exposure KDB procedures must be satisfied before applying these SAR test exclusion provisions; for example, handheld PTT two-way radios, handsets, laptops & tablets etc.“ [(max. power of channel, including tune-up tolerance, mW)/ (min. test separation distance, mm)] · [√f (GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where: • f (GHz) is the RF channel transmit frequency in GHz • Power and distance are rounded to the nearest mW and mm before calculation • The result is rounded to one decimal place for comparison • 3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to f) in section 4.1 is applied to determine SAR test exclusion. When one of the following test exclusion conditions is satisfied for all combinations of simultaneous transmission configurations, further equipment approval is not required to incorporate transmitter modules in host devices that operate in the mixed mobile and portable host platform exposure conditions. The grantee is responsible for documenting this according to Class I permissive change requirements. Antennas that qualify for standalone SAR test exclusion must apply the estimated standalone SAR to determine simultaneous transmission test exclusion. a) The [∑ of (the highest measured or estimated SAR for each standalone antenna configuration, adjusted for maximum tune-up tolerance) / 1.6 W/kg] + [∑ of MPE ratios] is ≤ 1.0. b)The SAR to peak location separation ratios of all simultaneously transmitting antenna pairs operating in portable device exposure conditions are all ≤ 0.04, and the [∑ of MPE ratios] is ≤ 1.0. 3. Refer Evaluation Method ANSI C95.1–1999: IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 kHz to 300 GHz. FCC KDB publication 447498 D01 General RF Exposure Guidance v06: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. FCC CFR 47 part1 1.1310: Radiofrequency radiation exposure limits. FCC CFR 47 part2 2.1093: Radiofrequency radiation exposure evaluation: portable devices Page 3 of 4 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity 4. Conducted Power Results <BT> Mode Channel Frequency (MHz) Peak Conducted Output Power (dBm) GFSK 0 2402 6.35 39 2441 6.76 78 2480 6.61 π/4-DQPSK 0 2402 4.72 39…

Text truncated - open the document above for the full version.

求是 价值 双赢 深圳市千目通讯科技有限公司 Shenzhen Qianmu Communication Technology Co.,Ltd. Customer: Ideum: LW77 Daily: 2023-2-1 Version: A1 Radio frequency: zheng Li Guo Shenzhen Qianmu Communication Technology Co.,Ltd. 求是 价值 双赢 Table of contents 1. Test environment 2. Contrastly debug record description 3. Matching circuit description 4. Active test data 5. Transmission test data 6. Call current sound simulation test 7. Environmental treatment description 8. GPS/WIFI/BT Source Non -Source 9. GPS/WIFI/BT actual measurement effect 10. Summary 求是 价值 双赢 Test environment Test items Equipment 1. S-parameter （S-parameter） 1. Back loss （Return Loss） 2. Voltage resident Bobby （VSWR） Network Analyzer : Agilent E5071B HP 8753D 2. Source test （Active ） 1. Launch power（TRP） 2. Receiving sensitivity（TIS） 3.Frequency error 4.Destroy 1. darkroom：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2.Tester: Agilent 8960 E5515B ×2 StarPoint SP6011 3.Passive test （Passive） 1.Antenna gain （Gain） 2.Antenna efficiency （Efficiency） 1. Darkroom：ETS 7x4x3 m (3D) Chamber ETS 5x3x3 m (3D) Chamber 2. Network Analyzer：Agilent E5071B HP 8753D 求是 价值 双赢 历次调试记录说明 Date Version Debugging record description 2023-2-1 A1 Metal model as antenna debugging prototype 求是 价值 双赢 model Bluetooth Watches Version Motherboard Antenna overview Antenna status Antenna status Antenna form Design area Match change Bluetooth antenna BT 2.4GHz~2.5GHz Metal Monopole Motherboar d / Prototype state Debug machine Environmental treatment Terminal debugging instructions 求是 价值 双赢 Matching circuit-BT antenna ANT PA The original matching circuit of your company has not changed any changes NF NF 0Ω 0Ω 求是 价值 双赢 WIFI/BT天线 Situted efficiency and gain of the antenna Shenzhen Qianmu Communication Technology Co.,Ltd. 求是 价值 双赢 BT antenna measure： 1. Bluetooth test, Android mobile phone connection watch to play music (indoor) testing more than 30 meters in the case of barrier -free obstacles. 2. Bluetooth test, Android mobile phone connection watch call, (Outdoor) Test a straight line distance of about 15 meters. Shenzhen Qianmu Communication Technology Co.,Ltd. 求是 价值 双赢 Motherboard antenna contact and middle frame contact to make antennas 求是 价值 双赢 The antenna direction map and apple map 求是 价值 双赢 The antenna direction map and apple map 求是 价值 双赢 The antenna direction map and apple map Shenzhen Qianmu Communication Technology Co.,Ltd. 求是 价值 双赢 Prompt hint: 1. This data is only for the data generated by the customer to provide the prototype, which does not mean that the customer's final mass production status; 2. Ask customers to carefully confirm in our report, matching circuit modification and environmental processing instructions; 3. Please cooperate with the sample machine to provide a secondary verification before mass production; if there are replacement materials, update software and environmental processing, please inform in advance; 4. If the customer needs a third -party reinstatement, or send the customer for testing, please go to our company to verify and then send the sample machine; prevent the machine from the difference between the machine and the debugging machine; Five: Our company does not accept it. We have been debugging machine data and other dark room testing data, but you can refer to and certify the dark room except. If the data is different, everything shall be based on the debug machine. Shenzhen Qianmu Communication Technology Co.,Ltd. 求是 价值 双赢 Thanks! All the information and copyrights contained in this report belong to our company, and do not spread to third parties without the permission of our company.

Page 1 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Appendix A RF Test Data for BT (Conducted Measurement) Product Name: Smart watch Test Model: SR1 Environmental Conditions Temperature: 23.8  C Relative Humidity: 52.1% ATM Pressure: 100.0 kPa Test Engineer: Joker Hu Supervised by: Ling Zhu Page 2 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.1 -20dB Bandwidth Condition Mode Frequency (MHz) Antenna -20 dB Bandwidth (MHz) Limit -20 dB Bandwidth (MHz) Verdict NVNT 1-DH5 2402 Ant1 0.96 N/A Pass NVNT 1-DH5 2441 Ant1 0.954 N/A Pass NVNT 1-DH5 2480 Ant1 0.952 N/A Pass NVNT 2-DH5 2402 Ant1 1.366 N/A Pass NVNT 2-DH5 2441 Ant1 1.363 N/A Pass NVNT 2-DH5 2480 Ant1 1.367 N/A Pass NVNT 3-DH5 2402 Ant1 1.35 N/A Pass NVNT 3-DH5 2441 Ant1 1.348 N/A Pass NVNT 3-DH5 2480 Ant1 1.348 N/A Pass Page 3 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs -20dB Bandwidth NVNT 1-DH5 2402MHz Ant1 -20dB Bandwidth NVNT 1-DH5 2441MHz Ant1 Page 4 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -20dB Bandwidth NVNT 1-DH5 2480MHz Ant1 -20dB Bandwidth NVNT 2-DH5 2402MHz Ant1 Page 5 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -20dB Bandwidth NVNT 2-DH5 2441MHz Ant1 -20dB Bandwidth NVNT 2-DH5 2480MHz Ant1 Page 6 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -20dB Bandwidth NVNT 3-DH5 2402MHz Ant1 -20dB Bandwidth NVNT 3-DH5 2441MHz Ant1 Page 7 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity -20dB Bandwidth NVNT 3-DH5 2480MHz Ant1 Page 8 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity A.2 Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Total Power (dBm) Limit (dBm) Verdict NVNT 1-DH5 2402 Ant1 6.35 21 Pass NVNT 1-DH5 2441 Ant1 6.76 21 Pass NVNT 1-DH5 2480 Ant1 6.61 21 Pass NVNT 2-DH5 2402 Ant1 4.72 21 Pass NVNT 2-DH5 2441 Ant1 5.19 21 Pass NVNT 2-DH5 2480 Ant1 5.16 21 Pass NVNT 3-DH5 2402 Ant1 5.25 21 Pass NVNT 3-DH5 2441 Ant1 5.68 21 Pass NVNT 3-DH5 2480 Ant1 5.62 21 Pass Page 9 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Test Graphs Power NVNT 1-DH5 2402MHz Ant1 Power NVNT 1-DH5 2441MHz Ant1 Page 10 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT 1-DH5 2480MHz Ant1 Power NVNT 2-DH5 2402MHz Ant1 Page 11 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT 2-DH5 2441MHz Ant1 Power NVNT 2-DH5 2480MHz Ant1 Page 12 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, Shenzhen, 518000, China Tel: +(86) 0755-82591330 | E-mail: [email protected] | Web: www.lcs-cert.com Scan code to check authenticity Power NVNT 3-DH5 2402MHz Ant1 Power NVNT 3-DH5 2441MHz Ant1 Page 13 of 54 FCC ID: 2A7YB-SR1 Shenzhen LCS Compliance Testing Laboratory Ltd. Add: 101, 201 Bldg A & 301 Bldg C, Juji Industrial Park Yabianxueziwei, Shajing Street, Baoan District, …

Text truncated - open the document above for the full version.