2A8UJ-HYD1201000CECO Floor Lamp

3 2.The assembly method and sequence of the lamp tube. (1).Insert the bottom light tube and the middle light tube horizontally, ensuring that the connecting piece of the middle light tube is fully inserted into the connecting groove of the bottom light tube. When inserted properly, the elastic protrusion on the connecting piece will be engaged in the limit hole of the bottom light tube. (2).After connecting the bottom and middle light tubes, proceed to connect the re- maining middle light tubes and the top light tube in order. Note that the one with a top cover is the top light tube. 3.Assemble the Base (1).Identify the two semicircular base halves. (2).Align the two halves together, matching the connector tabs. (3).Press down firmly from top to bottom until both plastic snap fasteners click se- curely into place. (4).Confirm the base is firmly assembled — it should not wobble or separate when lifted. Plastic snap button Positioning limit hole 4.Installation method of lamp tube and base Insert the fully assembled and connected light tube by turning the screw at the bot- tom of the tube clockwise into the nut at the center of the base. Tighten it to com- plete the base installation. 4 5.Connect Power and Complete Installation (1).Route the power cable from the base to a nearby wall outlet. (2).Connect the power adapter plug to the socket on the base. (3).Plug the adapter into the wall outlet (AC 100–240V). (4).The lamp will power on automatically upon first connection. Proceed to Part 2 to configure your preferred control method. 5 6.Dismantling method of lamp tube and base When disassembling the lamp tube and the base, we hold the base steady with one hand while gripping the bottom of the lamp tube with the other and rotating it coun- terclockwise until the lamp tube detaches from the base. 6 7.Dismantling method of lamp tube Hold two adjacent fluorescent tubes with both hands horizontally and pull them outwards to the left and right in parallel, then pull them out with force. 7 8.To disassemble the base. Gently push the buckle in the direction of the arrow, then you can separate the base into two halves. Please be careful not to damage the buckle. 891011121314 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body This device contains licence-exempt transmitter(s) / receiver(s) that comply with Innovation,Science and Economic Development Canada's licence-exempt RSS(s). Operation is subject to thefollowing two conditions: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body FCC Radiation Exposure Statement IC Radiation Exposure Statement Cet équipement respecte les limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. L'installation et l'utilisation de cet équipement doivent s'effectuer avec une distance minimale de 20 cm entre l'émetteur de rayonnement et votre corps. Déclaration d'exposition aux rayonnements IC

COMPANYLETTERHEAD CoveredEquipmentCertificationAttestationLetter 5/9/2026 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA ATTN.:ReviewingEngineer FCCID:2A8UJ-HYD1201000C (SHENZHENGIANTLIGHTINGCO.,LTD)certifiesthattheequipmentforwhich authorizationissoughtisnot“covered”equipmentprohibitedfromreceivingan equipmentauthorizationpursuanttosection2.903oftheFCCrules. Note:Iftheequipmentforwhichtheapplicantseeksauthorizationisproducedby anyoftheentitiesidentifiedonthecurrentCoveredList,theapplicantshould includeanexplanationonwhytheequipmentisnot“covered”equipment. (SHENZHENGIANTLIGHTINGCO.,LTD)certifiesthat,asofthedateofthefilingof theapplication,theapplicantisnotidentifiedontheCoveredList(asaspecifically namedentityoranyofitssubsidiariesoraffiliates)asanentityproducing“covered” equipment. (SHENZHENGIANTLIGHTINGCO.,LTD)certifiesthattheequipmentforwhich authorizationissoughtdoesnotincludecybersecurityoranti-virussoftwareproducedor providedbyKasperskyLab,Inc.oranyofitssuccessorsandassignees,including equipmentwithintegratedKasperskyLab,Inc.(oranyofitssuccessorsandassignees) cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446D01 CoveredEquipmentGuidancesectionB(2a). Signed: Printedname:DivenTang Title:Manager CompanyName:SHENZHENGIANTLIGHTINGCO.,LTD Date:5/9/2026

* the applicant must designate a contact located in the United States for purposes of acting as the applicant’s agent for service of process, regardless of whether the applicant is a domestic or foreign entity. An applicant located in the United States may designate itself as the agent for service of process. SC6054788 U.S. Agent Designation for Service of Process - Certification Attestation Letter 5/13/2026 TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTN.: Reviewing Engineer FCC ID: 2A8UJ-HYD1201000C FRN of applicant: 0032931172 Per section 2.911(d)(7) of the FCC rules, SHENZHEN GIANT LIGHTING CO., LTD FRN:0032931172(“the applicant”) certifies that the equipment for which authorization is sought is designated to the following U.S. agent* for service of process: Company Name: Global Product Services and Consultation LLC FCC Registration Number (FRN): 0033406703 Physical U.S. Company Address: 328 W Palm Ave. Monrovia, CA91016 Contact Person: Michael Chan Tel: +1 626 366 4358 Agent Email Address: [email protected] The above contact person accepts the obligation for service of process. The applicant accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signed: Agent Signed (if different from Applicant): Signed: Printed name: Diven Tang Title: Manager Company Name: SHENZHEN GIANT LIGHTING CO., LTD Date: 5/13/2026 Signed: Printed name: Michael Chan Title: Technical Director Company Name: Global Product Services and Consultation LLC Date: 5/13/2026

DATE:2026/5/9 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 AuthoritytoActasAgent Onourbehalf,IappointShenzhenVOPTestingTechnologyCo.,Ltd.103,Building5, WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen, GuangdongPeople'sRepublicofChinatoactasouragentinthepreparationofthis applicationforequipmentcertification.Icertifythatsubmitteddocumentsproperlydescribe thedeviceorsystemforwhichequipmentcertificationissought.Ialsocertifythateach unitmanufactured,importedormarketed,asdefinedintheFederalCommunications Commission’sregulationswillhaveaffixedtoitalabelidenticaltothatsubmittedfor approvalwiththisapplication. Forinstanceswhereourauthorizedagentsignstheapplicationforcertificationonour behalf,Iacknowledgethatallresponsibilityforcomplyingwiththetermsandconditions forcertification,stillresideswithSHENZHENGIANTLIGHTINGCO.,LTD3/F,Building1, No.9,JiejiabaoRoad,ShuitianCommunity,ShiyanStreet,Bao'anDistrict,ShenzhenChina <Signature> Name ： DivenTang Title ： Manager ApplicantCompany ： SHENZHENGIANTLIGHTINGCO.,LTD

Date：2026/5/9 FederalCommunicationsCommission Authorization&EvaluationDivision 7345OaklandMillsRoad Columbia,Maryland21046 RE:LETTEROFAGENTAUTHORIZATION ToWhomItMayConcern: We,theundersigned,herebyauthorizeComplianceTesting,LLCtoactonourbehalfinallmatters relatingtoapplicationforequipmentauthorization,includingthesigningofalldocumentsrelatingto thesematters. Wealsoherebycertifythatnopartytotheapplicationauthorizedhereunderissubjecttothedenialof benefits,includingFCCbenefits,pursuanttoSection5301oftheAnti-DrugAbuseActof1988,21 U.S.C.853(a). Sincerely, <Signature> Name ： DivenTang Title ： Manager Company ： SHENZHENGIANTLIGHTINGCO.,LTD

DATE ： 2026/5/9 EquipmentAutorisationDivision FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 FCCID:2A8UJ-HYD1201000C ProductName:ECOFloorLamp RequestforConfidentiality PursuanttoSections0.457and0.459ofthecommission’srules,weherebyrequestthat thefollowingdocumentsbeheldconfidential: (Listherethedocumentsforwhichyouareseekingconfidentiality–forexample...) Schematics  Blockdiagram Operationdescription Thesematerialscontaintradesecretsandproprietaryinformationandarenot customarilyreleasedtothepublic.Thepublicdisclosureofthisinformationmightbe harmfultothecompanyandprovideunjustifiedbenefitstoourcompetitors. <Signature> Name ： DivenTang Title ： Manager Company：SHENZHENGIANTLIGHTINGCO.,LTD

EUTExternalphotos

ECOFloorLamp Model:HYD-1201000C FCCID:2A8UJ-HYD1201000C IC:30817-HYD1201000C

EUTInternalphotos

Page1of9ReportNo.:VOP20260427001ER2 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] FCCTestReport Applicant’sname:ShenzhenGiantLightingTechnologyCo.,Ltd Address: Building1,3rdFloor,No.9JiejiabaoRoad,ShuitianCommunity,ShiyanStreet, Bao’anDistrict,Shenzhen Manufacture'sName:ShenzhenGiantLightingTechnologyCo.,Ltd Address: Building1,3rdFloor,No.9JiejiabaoRoad,ShuitianCommunity,ShiyanStreet, Bao’anDistrict,Shenzhen Productdescription Tradermark:N/A ProductName::ECOFloorLamp Modeland/ortypereference:HYD-1201000C SerialModel:N/A Rating(s):AC100-240V Standards: FCC47CFR§2.1091 447498D04InterimGeneralRFExposureGuidancev01 FCCID:2A8UJ-HYD1201000C TheEUTdescribedabovehasbeentestedbyuswiththelistedstandardsandfoundincompliancewiththeFCC requirements.ItispossibletouseFCCmarkingtodemonstratethecompliancewiththisFCCrequirements. Note:Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongastheShenzhen VOPTestingTechnologyCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.ShenzhenVOP TestingTechnologyCo.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthe reader'sinterpretationofthereproducedmaterialduetoitsplacementandcontext. DateofTest Date(s)ofperformanceoftests:2026-04-27~2026-05-09 DateofIssue:2026-05-09 TestResult:Pass Preparedby: ProjectEngineer Reviewedby: ProjectSupervisor Approvedby: TechnicalDirector $5*1&V Page2of9ReportNo.:VOP20260427001ER2 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] REPORTREVISERECORD ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/2026-05-09ValidInitialRelease Page3of9ReportNo.:VOP20260427001ER2 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] Contents Contents..........................................................................................................................................................................3 1.TESTSUMMARY........................................................................................................................................................4 2.TESTFACILITY...........................................................................................................................................................4 2.1.DeviationfromStandard...................................................................................................................................4 2.2.AbnormalitiesfromStandardConditions..........................................................................................................4 3.GENERALINFORMATION.........................................................................................................................................5 3.1.GeneralDescriptionofEUT..............................................................................................................................5 3.2.EUTTestMode.................................................................................................................................................5 3.3.AuxiliaryEquipmentUsedDuringTest.............................................................................................................5 4.TESTRESULTS..........................................................................................................................................................6 4.1.Radiofrequencyradiationexposureevaluation:mobiledevices......................................................................6 4.1.1.Conclusion:.............................................................................................................................................9 Page4of9ReportNo.:VOP20260427001ER2 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 1.TESTSUMMARY No.TestItemBasicStandardRequirementResult 1 Radiofrequencyradiationexposure evaluation:mobiledevices Radiofrequency radiationexposure evaluation 47CFRPart2.1091PASS 2.TESTFACILITY ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,Guangdong People'sRepublicofChina FCC:DesignationNumber:CN1438,CertificateNumber:7579.01 2.1.DeviationfromStandard None 2.2.AbnormalitiesfromStandardConditions None Page5of9ReportNo.:VOP20260427001ER2 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 3.GENERALINFORMATION 3.1.GeneralDescriptionofEUT Manufacturer:ShenzhenGiantLightingTechnologyCo.,Ltd ManufacturerAddress: Building1,3rdFloor,No.9JiejiabaoRoad,ShuitianCommunity,ShiyanStreet,Bao’an District,Shenzhen EUTName:ECOFloorLamp ModelNo:HYD-1201000C SerialModel:N/A BrandName:N/A DifferenceDescription:N/A 3.2.EUTTestMode TM1TXmode Note:Allabovemodehavebeenmeasurement,onlyworstdatawasreported. 3.3.AuxiliaryEquipmentUsedDuringTest No.EquipmentManufacturerModelNo.SerialNo.Remark 1N/AN/AN/AN/AN/A Page6of9ReportNo.:VOP20260427001ER2 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] 4.TESTRESULTS 4.1.Radiofrequencyradiationexposureevaluation:mobiledevices TestRequirement:47CFRPart2.1091 TestLimit: Blanket1…

Text truncated - open the document above for the full version.

Page1of68ReportNo.:VOP20260427001ER1-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] RadioTestReport 47CFRPart15.247 Applicant’sname:ShenzhenGiantLightingTechnologyCo.,Ltd Address: Building1,3rdFloor,No.9JiejiabaoRoad,ShuitianCommunity,ShiyanStreet, Bao’anDistrict,Shenzhen Manufacture'sName:ShenzhenGiantLightingTechnologyCo.,Ltd Address: Building1,3rdFloor,No.9JiejiabaoRoad,ShuitianCommunity,ShiyanStreet, Bao’anDistrict,Shenzhen Productdescription Tradermark:N/A ProductName::ECOFloorLamp Modeland/ortypereference:HYD-1201000C SerialModel:N/A Rating(s):AC100-240V Standards:47CFRPart15.247 FCCID:2A8UJ-HYD1201000C TheEUTdescribedabovehasbeentestedbyuswiththelistedstandardsandfoundincompliancewiththeFCC requirements.ItispossibletouseFCCmarkingtodemonstratethecompliancewiththisFCCrequirements. Note:Thispublicationmaybereproducedinwholeorinpartfornon-commercialpurposesaslongastheShenzhen VOPTestingTechnologyCo.,Ltd.isacknowledgedascopyrightownerandsourceofthematerial.ShenzhenVOP TestingTechnologyCo.,Ltd.takesnoresponsibilityforandwillnotassumeliabilityfordamagesresultingfromthe reader'sinterpretationofthereproducedmaterialduetoitsplacementandcontext. DateofTest Date(s)ofperformanceoftests:2026-04-27~2026-05-09 DateofIssue:2026-05-09 TestResult:Pass Preparedby: ProjectEngineer Reviewedby: ProjectSupervisor Approvedby: TechnicalDirector $5*1&V Page2of68ReportNo.:VOP20260427001ER1-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] REPORTREVISERECORD ReportVersionReviseTimeIssuedDateValidVersionNotes V1.0/2026-05-09ValidInitialRelease Page3of68ReportNo.:VOP20260427001ER1-R01 ShenzhenVOPTestingTechnologyCo.,Ltd. Add:103,Building5,WanyanIndustrialParkQiaotouCommunity,FuhaiStreet,BaoanDistrictShenzhen,GuangdongPeople'sRepublicofChina TEL:+86-75523090787Website:www.vop-lab.comE-mail:[email protected] Contents Contents..........................................................................................................................................................................3 1.TESTSUMMARY........................................................................................................................................................5 2.MEASUREMENTUNCERTAINTY..............................................................................................................................5 3.TESTFACILITY...........................................................................................................................................................6 3.1.DeviationfromStandard...................................................................................................................................6 3.2.AbnormalitiesfromStandardConditions..........................................................................................................6 4.GENERALINFORMATION.........................................................................................................................................7 4.1.GeneralDescriptionofEUT..............................................................................................................................7 4.2.EUTTestMode.................................................................................................................................................8 4.3.AuxiliaryEquipmentUsedDuringTest.............................................................................................................8 5.EQUIPMENTSLISTFORALLTESTITEMS..............................................................................................................9 6.TESTRESULTS........................................................................................................................................................10 6.1.Antennarequirement......................................................................................................................................10 6.1.1.Conclusion:...........................................................................................................................................10 6.2.ConductedEmissionatACpowerline............................................................................................................11 6.2.1.EUTOperation......................................................................................................................................11 6.2.2.TestSetupDiagram:.............................................................................................................................12 6.2.3.TestData...............................................................................................................................................13 6.3.6dBBandwidth................................................................................................................................................15 6.3.1.EUTOperation......................................................................................................................................15 6.3.2.TestSetupDiagram:.............................................................................................................................16 6.3.3.TestData...............................................................................................................................................16 6.4.MaximumConductedOutputPower...............................................................................................................17 6.4.1.EUTOperation......................................................................................................................................17 6.4.2.TestSetupDiagram:..........................…

Text truncated - open the document above for the full version.

Productspecification QuickReferenceDate Antennamoduleonthesystemboard FrequencRange2400~2500GHz Ant.PortInputPwr.(dBm)0(Typ.BTclass2outputpower) PeakEIRP(dBm)-1.2 Directivity(dBi)1(alldirectionantenna) InputImpendence(ohm)50 PolarizationTypeVertical&Horizontal V.S.W.R<3 Allthetechnicaldataandinformationcontainedhereinaresubjecttochangewithoutpriornotice AntennaLayout&moduleonthesystemboard AntennaGain Freq(Mhz)Max(dB)Min(dB)Gain(dBi)Effi(%) 2402-0.24-16.8-0.2431 24400.1-15.60.133 2480-0.41-19.7-0.4129 ERP Freq(Mhz)TRP(dBm) NHPRP±45/NHPIS±45 (dBm) NHPRP±30/NHPIS±30 (dBm) 2402 -4.439329833-5.472563248-6.58401478 2440 -4.833811857-5.845939228-6.932441487 2480 -1.277852118-2.230627413-3.625901541 ReturnLoss 2Dradiationpatterndiagram XY-planeXZ-planeYZ-plane

TESTSETUPPHOTOS ConductedEmissionatACpowerline Emissionsinfrequencybands(below1GHz) Emissionsinfrequencybands(above1GHz) RFconductedtest