2A8UJ-LZ1201Intelligent floor lamp

Thanks for buying the RGBICW floor lamp. Read the manual carefully, especially the warnings, and keep it for future reference. Follow the instructions closely for proper installation. After installation, control the lamp using the app or button. We provide 2 years warranty for any questions since you received the product,please feel free to contact our customer service. Product Name Material Dimension Rated Power Inpute Voltage Color of light Max Luminous Flus LED Light Source Controlled Waterproof Indoor Use Only Voice/APP/Touch Digital RGB+warm white, total 78LEDs 960lm RGBICW AC 100~240V 12W Aluminum & PC RGBICW Floor Lamp Foreword Made in China Specification English Open the package and take out all the lamp components,includes as following 1 x Lamp Base A 2 x Lamp B 1 x Lamp C 1 x Power adapt with wire Put the base with the Lamp Base A in place. Insert 2 x Lamp B and 1x Lamp C into Lamp Base A Install screws on the joint of A, B and Lamp C, then tighten them clockwise with a hex wrench. Plug in the power adapter and complete the installation. NOTE: When disassemble the floo r lamp, keep gently to shake the connection, pull out lamp bar while twisting the screw, do not pull violently, it may damage cable. position,keep a proper distance with you. make sure not affect your ln-room activities 2.1.Three buttons on the base 2.2.Remote controller A:You can download it by scanning the QR code. A:You can download it by scanning the QR code. B:You can download "Magic Lantern" from the Apple Store. The first time you need to agree to use Bluetooth. Turn on Bluetooth on your phone. After turning on Bluetooth, you can find the new device in the “Group Manage” screen, please connect it. connect it. Lighting styles & Music selection Timing setting & Voice or mic Mode B:You can go to Google Play and download the "Symphony Lotus Lantern" application Android user IOS user The RGBICW Floor lamp and surrounding parts might get hot after hours of continuous use, do not place your hands directly on the light. Please ensure the stated minimum distance is maintained at all times. This product should be kept away from combustible materials (eg. curtains). Power off when replacing and cleaning to avoid electric shock. Be cautions of static electricity during installation and usage. Do not stare at the lamp for a long time. Please keep it away from children. The product is not water resistant, be cautions when installing and using. TPart 3 :Safety Warning ISED Statement: This device complies with Part 15 of FCC Rules [ and contains license-exempt transmitter(s) that comply with innovation，Science and Economic Development Canada’s licence-exempt RSS Standar(s)]. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference received, including interference that may cause undesired operation. The digital apparatus complies with Canadian CAN ICES 3 (B)/ NMB 3(B). This device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS 102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This equipment complies with Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 200mm between the radiator & your body. French: L’appareil est conforme à la partie 15 des règles de la FCC [et contient des émetteurs exemptés de licence qui répondent aux critères du CNR d’exemption de licence d’innovation, sciences et développement économique Canada]. L'opération doit remplir les deux conditions suivantes: (1) L'appareil ne peut pas causer d'interférence; Et (2) L'appareil doit accepter toute interférence reçue, y compris celles qui peuvent entraîner un fonctionnement indésirable. Les appareils numériques sont conformes à la norme canadienne can ICES 3 (b) / NMB 3 (b). L'appareil est conforme à l'exemption des limites d'évaluation de routine de la section 2.5 du CNR 102, l'exposition aux radiofréquences est conforme au CNR 102 et les utilisateurs peuvent obtenir des renseignements canadiens sur l'exposition aux radiofréquences et la conformité. L'appareil est conforme aux limites d'exposition aux rayonnements établies au Canada pour les environnements non contrôlés. Lors de l'installation et de l'utilisation de cet appareil, la distance minimale entre le radiateur et le corps doit être de 200mm. FCC WarningThis device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment compli…

Text truncated - open the document above for the full version.

SHENZHEN GIANT LIGHTING CO., LTD Federal Communications Commission Authorization and Evaluation Division Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MD 21046 7/2/2023 U.S. Agent Designation SHENZHEN GIANT LIGHTING CO., LTD acknowledges their consent for the following contact located in the United States to act as their agent for service of process for the equipment for which authorization is sought (FCC ID: 2A8UJ-LZ1201): Name and company of U.S. agent: Linkage Technology, LLC Physical U.S. address of agent: 10601 NEWCOMBE ST BROOMFIELD CO 80021-3630 USA FRN of U.S. agent: 0033401480 Email address of U.S. agent: [email protected] acknowledges their obligation to accept service of process on behalf of SHENZHEN GIANT LIGHTING CO., LTD with the FRN 0032931172 accepts its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. By signing this form, we confirm the above and that we are aware of the application requirements listed under § 2.911(d)(7). The information provided in this letter is based on the referenced rule parts of Title 47 of the CFR as well as KDB 986446 D01. An expiration date for this letter does not exist. In case the U.S. agent changes, the grantee is obligated to notify the FCC within 30 days via the granting TCB. Sincerely, Signature [Diven] [manager] SHENZHEN GIANT LIGHTING CO., LTD Signature [Candy Jones] [manager ] Linkage Technology, LLC 48_[mo del] US_Agent_2.911(d)(7) - U, V05 Linkage Technology, LLC SHENZHEN GIANT LIGHTING CO., LTD

FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201 External photos FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201 FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201 FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201

FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201 Label place(20*25mm) Label sample： Intelligent floor lamp Model: LZ-1201000A FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201

FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201 Internal photos Antenna FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201 ANT FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201 FCC ID: 2A8UJ- LZ1201 IC: 30817- LZ1201

RF Exposure evaluation FCC ID: 2A8UJ-LZ1201 Exposure category: General population/Uncontrolled environment EUT Type: Production Unit Device Type: Mobile Device 1. Reference According to $1.1307(b)(1), systems operating under the provisions of this section shall be operated in a manner that ensures that the public is not exposed to radio frequency energy level in excess of the Commission's guidelines. According to $1.1310 and $2.1091 RF exposure is calculated. KDB447498 D01: Mobile and Portable Devices RF Exposure Procedures and Equipment Authorization Policies. 2. Limit Limits for Maximum Permissible Exposure (MPE)/Controlled Exposure Limits for Maximum Permissible Exposure (MPE)/uncontrolled Exposure F=frequency in MHz *=Plane-wave equivalent power density 3. MPE Calculation Method Predication of MPE limit at a given distance Equation from page 18 of OET Bulletin 65, Edition 97-01 S-PG/4πR 2 Where: S-power density P-power input to antenna G-gain of the antenna in the direction of interest relative to an isotropic radiator R-distance to the center of radiation of the antenna 4. Antenna Information A2768 can only use antennas certificated as follows provided by manufacturer; Internal Identification Antenna Identification Internal photos Antenna type and antenna number Operate frequency band Maximum antenna gain ANTENNA1 BT ANT PCB ANT 2402-2480MHz 0dBi 5. Standalone MPE Result As declared by the Applicant, the EUT is a wireless device used in a fix application, at least 20 cm from any body part of the user or nearby persons; from the maximum EUT RF output power, the minimum separation distance, r=20cm, as well as the gain of the used antenna is 0dBi, the RF power density can be obtained. Modulation Type Target power/ tolerance (dBm) Max tune-up power (dBm) Max Output power to antenna (mW) Antenna Gain (Numeric) Power Density R=20cm (mW/cm2) Limit (mW/cm2) ) Result π/4DQPSK 0±1.0 1.0 1.259 1.000 0.00025 1.0 PASS 6. Conclusion The measurement results comply with the FCC Limit per 47 CFR 2.1091 for the uncontrolled RF Exposure of mobile device.

1. Antenna describe: Antenna plate PCB ANT Make name/model name 2.4G ANT Antenna gain 0dBi Max Frequency range 2402-2480MHz Connector type direct Location of mearement(company name) ZHUHAI JIELI TECHNOLOGY CO.,LTD 2.External view drawing: Picture of antenna Manufacturer: ZHUHAI JIELI TECHNOLOGY CO.,LTD 3.Antenna Radiation Pattern Radiation [email protected] Total Average Gain：—0.475dbi \ Phi 045 90 135 180 235 270 315 Gain -0. 1 -0.3 -0.8 -0.5 -0.2 -0. 6 -0.8 -0.5 Radiation [email protected] Total Average Gain：-0.275dbi \ Phi 045 90 135 180 235 270 315 Gain 0 -0.1-0. 3-0. 6-0.1-0.2-0.6-0.4 Radiation [email protected] Total Average Gain：-0.237dbi Gain 0 45 90 135 180 235 270 315 0 -0. 1-0.2-0.50 -0.3-0. 6-0.2 Phi

Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn TEST REPORT FCC PART 15 SUBPART C 15.247 & RSS-247 Report Reference No......................: FCC ID. ........................................... : CTA23061600301 2A8UJ-LZ1201 IC. ......................................................30817-LZ1201 Compiled by ( position+printed name+signature)..: File administrators Kevin Liu Supervised by ( position+printed name+signature)..: Project Engineer Kevin Liu Approved by ( position+printed name+signature)..: RF Manager Eric Wang Date of issue.....................................:June 20, 2023 Testing Laboratory Name..............: Shenzhen CTA Testing Technology Co., Ltd. Address............................................: Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao‘an District, Shenzhen, China Applicant’s name............................: SHENZHEN GIANT LIGHTING CO., LTD Address............................................: 3rd Floor, Building C, No. 6 Private 2nd Road, Shilong Community, Shiyan Street, Bao'an District, Shenzhen, China Test specification...........................: Standard ...........................................: 47 CFR FCC Part 15 Subpart C 15.247 RSS-247 Issue 2, February 2017 Shenzhen CTA Testing Technology Co., Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen CTA Testing Technology Co., Ltd. is acknowledged as copyright owner and source of the material. Shenzhen CTA Testing Technology Co., Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: Intelligent floor lamp Trade Mark .......................................: N/A Manufacturer....................................: SHENZHEN GIANT LIGHTING CO., LTD Model/Type reference(HVIN)............: LZ-1201000A Listed Models(HVIN) ........................: TH01 Modulation .......................................:GFSK, Π/4DQPSK Frequency..........................................From 2402MHz to 2480MHz Rating...............................................:DC12V from adapter Result...............................................:PASS Report No.: CTA23061600301 Page 2 of 46 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn T E S T R E P O R T Equipment under Test:Intelligent floor lamp Model /Type(HVIN):LZ-1201000A Listed Models(HVIN):TH01 Applicant : SHENZHEN GIANT LIGHTING CO., LTD Address: 3rd Floor, Building C, No. 6 Private 2nd Road, Shilong Community, Shiyan Street, Bao'an District, Shenzhen, China Manufacturer : SHENZHEN GIANT LIGHTING CO., LTD Address: 3rd Floor, Building C, No. 6 Private 2nd Road, Shilong Community, Shiyan Street, Bao'an District, Shenzhen, China Test Result:PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: CTA23061600301 Page 3 of 46 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn Contents 1TEST STANDARDS ..................................................................4 2SUMMARY .............................................................................5 2.1General Remarks5 2.2Product Description5 2.3Equipment Under Test5 2.4Short description of the Equipment under Test (EUT)5 2.5EUT operation mode5 2.6Block Diagram of Test Setup6 2.7Related Submittal(s) / Grant (s)6 2.8Modifications6 3TEST ENVIRONMENT ...............................................................7 3.1Address of the test laboratory7 3.2Test Facility7 3.3Environmental conditions7 3.4Summary of measurement results8 3.5Statement of the measurement uncertainty8 3.6Equipments Used during the Test9 4TEST CONDITIONS AND RESULTS............................................10 4.1AC Power Conducted Emission10 4.2Radiated Emission13 4.3Maximum Peak Output Power19 4.420dB Bandwidth20 4.5Occupied Bandwidth23 4.6Frequency Separation26 4.7Number of hopping frequency28 4.8Time of Occupancy (Dwell Time)30 4.9Out-of-band Emissions33 4.10Pseudorandom Frequency Hopping Sequence39 4.11Antenna Requirement40 5TEST SETUP PHOTOS OF THE EUT ..........................................41 6PHOTOS OF THE EUT ............................................................42 Report No.: CTA23061600301 Page 4 of 46 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Building 1, Yibaolai Industrial Park, Qiaotou Community, Fuhai Street, Bao’an District, Shenzhen, China Tel:+86-755 2322 5875 E-mail:[email protected] Web:http://www.cta-test.cn 1 TEST STANDARDS The tests were performed according to following standards: FCC Rules Part 15.247: Frequency Hopping, Direct Spread Spectrum and Hybrid Systems that are in operation within the bands of 902-928 MHz, 2400-2483.5 MHz, and 5725-5850 MHz. ANSI C63.10-2013 :American National Standard for Testing Unlicensed Wireless Devices RSS-247-Issue 2: Digital Transmission Systems (DTSs), Frequency Hopping Systems (FHSs) and Licence- Exempt Local Area Network (LE-LAN) Devices. RSS-Gen Issue 5: General Requirements for Compliance of Radio Apparatus Report No.: CTA23061600301 Page 5 of 46 Shenzhen CTA Testing Technology Co., Ltd. Room 106, Bu…

Text truncated - open the document above for the full version.

FCCID:2A8UJ-LZ1201 IC:30817-LZ1201 Radiatedemissions FCCID:2A8UJ-LZ1201 IC:30817-LZ1201 ConductedEmissions