2A8Z8-Z1Makera Z1 Desktop CNC Machine

Huaibei Makera Technology Co., Ltd

Click to zoom

Application Details

Equipment Class: DTS - Digital Transmission System
Date of Grant: Jun 04, 2026
Application Purpose: Original Equipment
Equipment Note: Makera Z1 Desktop CNC Machine
Frequency Range: 2402.00000000 - 2480.00000000
Company: Huaibei Makera Technology Co., Ltd
Country: China

Documents & Files

Select a file to view

Document Text

Text extracted from the exhibit documents filed with the FCC. Open a document above to read the original.

Users Manual

SAFETY GUIDELINES W睟睝 Safety Guidelines ˀˢ˗ ̆˟ʭˍʤʙˍʤ˃˥ˢ Disclaimer Please read this manual carefully before using the Makera Z1& Makera Z1 Pro. Failure to read the manual may lead to personal injury, inferior results, or damage to the Makera Z1& Makera Z1 Pro machine. This manual is provided for reference purposes only. We reserve the right to modify or revise this manual, users can download the most up-to-date version of this manual on our website. You should always monitor machines when in use. Milling cutters revolving in high-speed, unstable components or laser module in operation are dangerous to people without protection. Please carefully read the safety instructions below to avoid unnecessary harm. Intended Use Makera Z1& Makera Z1 Pro Desktop CNC Machine is designed to be used in strict accordance with the guidelines specified in the Guides. When using Makera Z1& Makera Z1 Pro Desktop CNC Machine to produce objects, users shall bear full responsibility for verifying and confirming the suitability of the produced objects for their intended use scenarios. This responsibility shall be particularly emphasized for application scenarios in highly regulated fields, including but not limited to medical devices and aeronautics industries. Safety Instructions 1. Always wear safety goggles when operating the machine, especially when the protective cover is open. 2. Always wear laser protection goggles when using the laser module. 3. Please wear hearing protection when Makera Z1& Makera Z1 Pro is machining on the hard materials. 4. Do not leave your machine unattended while it is machining. 5. Please be aware of the sharpness of the milling bits during installation, dust collection, and other operations. 6. Milling will generate heat. Inappropriate parameters will cause fire hazards. Make sure an extinguisher is in your vicinity. 7. Some materials are harmful to people when machining, such as carbon fiber. Please wear a face mask and connect a vacuum for dust collection. 8. Do not expose this machine to rain or wet conditions. 9. Keep children and bystanders away while operating this machine. It requires supervision and the assistance of an adult when children use this machine. Desktop CNC Safety - If an emergency occurred in machining, such as the workpiece being loose from holding, components damaging, unusual light or sound coming from the machine, etc. Press the main button or E-Stop button, all ongoing procedures will stop immediately, or cut off the power to shut it down. - Makera Z1& Makera Z1 Pro has a safety option that allows the machine to automatically stop working when opening the cover, which is useful for schools or work environments where children may reach. - The use of materials not supplied or specified for Makera's desktop CNC equipment may require additional protective and safety measures. Always review the Safety Data Sheet (SDS) provided by the material supplier for detailed safety instructions before use. Compliance FCC Compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio / TV technician for help. Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void your authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. ISEDC Compliance This device complies with Innovation, Science and Economic Development Canada License exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including inter ference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil nedoit pas produire de brouillage, et(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement. The device is compliance with RF exposure guidelines, users can obtain Canadian information on RF exposure nd compliance. The minimum distance from body to use the device is 20cm. Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux radiofréquences et compliance d’acquérir les informations correspondantes. La distance minimale du corps à utiliser le dispositif est de 20cm. Specificati…

Text truncated - open the document above for the full version.

Users Manual

7睟睞 Quick Start Guide Plese review the entire before using the product. ˀˢ˗ ̆˟ʭˍʤʙˍʤ˃˥ˢ Scan the QR code to view detailed guides, including the user manual, maintenance instructions, and troubleshooting. 㚇㟧⋄勳䰅嶵䬐忚勅㜟➈瑅ⶤ⎷䤭㙧◃ѵ勳㛀㧐䃧ѵ㥝檋㞪㯹佊Ѷ wiki.makera.com makerables.com Scan the QR code to visit Makerables, our CNC content community. Discover and share CNC projects, and use AI tools to turn ideas into reality quickly. 㚇㟧⋄勳䰅徳槞.BLFSBCMFT瑅㘭⌤䪉$/$▼⿛䵀❬Ѷ⠀䞷㊓☺⋣$/$㸴⮳㱜⏃瑅㊓⎷䤭"* (ᄇ)盷㐇搐〨㔏䃧⠇㘬䞷鬲Ѷ makera.com/support If you encounter any issues with your Carvera Air, scan the QR code for solutions or contact us directly. ⶤ㮰㓄搸♤⌳⎍▫⋆$BSWFSB"JS䪉槞沃瑅⠝㚇㟧⋄勳䰅㯹忖巗◩㧐㱜㘲䫹㞽呓僺㘭⌤Ѷ 1. Read Before Use---------------------03 2. Unboxing---------------------------03 3. Machine Overview-------------------03 4. What’s Included---------------------04 5.Common Tools---------------------05 6. Setting Up the Machine--------------05 7. Your First Job-----------------------05 8. Next Steps--------------------------05 CONTENTS 12 1. Read Before Use ⎷䤭⚁槵忯 Before using your Makera Z1ˍʤʙˍʤ˃˥ˢ, make sure to read thoroughly and understand the Safety Guidelines. Failure to follow the safety instructions may result in personal injury, inferior results, or damage to the product. ⎷䤭⚁瑅快䱱␕⎘(마)⌌勅槵忯㊓䠋巗Ѿ隹■汦䯩ѿ≥䪉▼⿛Ѷ 㬾㜡隹■㜟㌲㣥⎔〨⠝哺〞嗰⋲抚⍜龠ѵ♪⎔㘬⣯愙旀⎆≃瑅㘲〛⋟⣯搑㘬㝷⭷Ѷ 2. Unboxing ㌝侲 Remove the protective foam from the top and sides, then carefully lift the machine out of the box with assistance from another person. ⠅≃侲▼污擙⢺⏟歐䪉␕㛀眍䂽瑅䔿⠼⭐⌎⋲➁⛝≃瑅〱1日⭘〨㭎珪⌆侲≥㛈☯Ѷ Note: Please keep the carton, foam, and plastic packaging bag for future use. Carefully open the machine’s top cover as shown in the illustration below, then gently remove the internal foam and accessories from inside the machine. 快㜡䕰≃㧐䴼㔫⬦㙜䴼瑅〱1日㙯㌝㭎珪污擙䫛㮓瑅䔿⠼捪捪⠅☯㭎珪▼擙䪉␕㛀眍䂽⢺放⌮Ѷ Note: When opening the top cover, follow the illustrated steps to avoid damage. 34 3. Machine Overview 㭎珪㶕嶻 3.1 Basic Information 5.Auto Tool Setter 8.Emergency Stop 12.Datatype-C 9.Power input 11.SD card 10.External Control 1.Machine Cover 6.Machine Bed 2.Illumination Lights4.Wired Probe 3.Indicator Light 7.Main Button 1 7 3 2 4 5 6 8 9 10 11 12 4. What’s Included ✷⡙▼⿛ x 1Emergency stop x 63.175mm Milling Bits 4.1 Accessories & Materials 3.2 Status Indicator 鍘〄勵⟝鍒ꤑ倰䒭 StatusColour 䖉劼鵘遤险䫣䔱ꨪ ⥂䭯瘝䖉犜欽 ⠅溭兽⨢ 䊨Ⱘ䖉劼劼㐼㢅✵瑟ꢀ朐䙖劼㐼姻㖈鵘遤霃㢊䒗䌢꨽鍒ꝉ䛪㢕劼㐼㗂叻禹䔱ꨪꅾ縨挿ⴁ兽⨢䭽꛵ⱄ妃挿ⴁ㔐㢕劼㐼綕Ȿ餴俱幡ꤑ⚥ 劢鵶䱹霃㢊馄傞劢乼⡲꨽ꅾ゗劼㐼䛪㢕挿ⴁ兽⨢䭽꛵ⱄ妃挿ⴁ䛪㢕瘝䖉刿䰃䊨Ⱘ 朐䙖 Idle Run Alarm Home Hold Wait Disable Sleep Pause Tool/Wait Machine is idle How It Is Trigger/How To Quit Machine is working Machine has an alarm/Unlock it to restore Machine is resetting the coordinate Click the hold button/Click again to resume Machine is emptying the buffer No device has been connected Timeout/Reboot machine to restore Click the hold button/Click again to resume Waiting for tool changing x 10Spare 1/8" bit collar x 1Safety goggles x 1Power cable x 1USB cable x 13D Probe Rod x 1Double-Side tape 56 13 13 Factory test interface 13.Factory test port 1 4 3 2 5 6 8 7 x 1 4 in 1 Screwdriver x 1L bracket x 1 x 6 Milling bit x 2Top clamp Bit collar installer x 1Spindle collet installer x 10M5 Screws x 54mm Dowel pin 4.2 Tool Kits 1 2 3 4 5 6 7 8 x 2 Epoxy Tooling board x2MDF Board x 1Aluminum plate x 2Bicolor Stock x 2grease x 1Stand Block 5. Common Tools ㉖䤭(ᄇ)盷 5.1 Emergency Stop Button Plug the emergency stop cable into the rear port. Press it to stop the machine immediately in an emergency. The E-stop is self-locking; turn it clockwise to release before powering on. 〨㑁12.㌝▫劾㟪▝㭎珪⠼擙㞽⠑Ѷ儦㑁㨍㜡≃⠝仌➢12.㽳㭎珪Ѷ㑁 12.≲嗦棲㌬瑅㌝㭎⚁快汥㨍桹㧢捛嗯巗棲䚾㐝Ѷ 5.2 Wired Probe The wired probe supports automatic Z-axis probing. When prompted, install it like a milling bit. It includes a laser indicator that turns on automatically during boundary scanning, or can be activated by double-tapping the probe. 㬞劾㞺桹㥇㜙嗦⛜;捣㞺䅜Ѷ捞⌮㟨䴼㨍瑅┆㬊㝺☵盷∸㱋岶▝㞺桹➢⠝Ѷ㞺桹㉅䏋▁㜟䴼瑅㚇㟧措㱚㨍嗦⛜⋦慨瑅⊗⠝⟻☰㞺ⵗ㙧⛜㌝⡝Ѷ 78 wiki.makera.com Makera APP Makera Studio makera.com/software Scan the QR code to download Makera Studio and the Makera App. Design and generate toolpaths on your computer, then control the machine from your computer or mobile device. 㚇㟧⋄勳䰅≃捬.BLFSB4UVEJP⢺.BLFSB"11瑅㓄⠝⌝⭐䤺唎≂徲徕㊓䤤㘬☵懞㦞⌮ 瑅㊓⭐䤺唎㘲䷼⛜徲⴪≂㞿♪㭎珪揁尽Ѷ 5.3 Workholding Tools Install and secure the L-Bracket using two dowel pins and three M5×20 screws. The default position serves as the anchor point for X/Y alignment. Threaded holes on the inner side allow clamping with Top Clamps. ⎷䤭睟≢高⎅棱⢺睠沂.睢睟睝宭≕隹岶㊓⬢高-⮳歎ゑѶ犾徘⎅卮≲椋䓂瑅⏷⋆ 9:捣高⎅Ѷ▼⏟㉅宭劸米瑅⠝放⠶≂➺㮓⬢高(ᄇ)⌮Ѷ Anchor 1 L-Bracket Top Clamp 6. Setting Up the Machine 㭎珪徲卮 6.1 Install Software 5.4 More Scan the QR code to view a more detailed accessory guide. 㚇㟧⋄勳䰅㯹䬐㬊忚勅䪉放⌮⎷䤭㜟➈Ѷ Plug in the power cable and turn on the switch. Makera Z1瑁Makera Z1Pro瑂 will home all axes automatically, and the illumination light will stay blue (idle). 㟪≂䤺䊝劾㊓㙯㌝䤺䊝㌝▫Ѷ.BLFSB;睞瑁.BLFSB;睞1SP瑂〨嗦⛜⬇櫥㙜㬞捣瑅㜟䴼䑸␕㜙壖噮瑁乻槢䚾㐝瑂Ѷ 6.2 Power On 910 6.3 WiFi Configuration You can configure the network for ˀ˔˞ ̆˥˔ˍʤʛˍʤʙˍʤ˃˥ˢʜ using the Makera APP (connected to the machine’s AP) or Makera Studio (connected to the machine’s AP or via USB). Add the device in the software and follow the setup wizard to complete the WiFi configuration. Visit wiki.makera.com for the detailed software user guide. 㓄⠝⎷䤭.BLFSB"11瑁描㞽㭎珪"1瑂㘲.BLFSB4UVEJP瑁描㞽㭎珪"1㘲搋掸 64#㬞劾描㞽瑂≲.BLFSB; ;;1SP 放卐Ѷ⭐捞⌮≥眎⛔徲⴪㊓㜡⠿〞非㘬卐勛徲卮Ѷ⚁㎝XJLJNBLFSBDPN㯹䬐捞⌮忚勅㣥⎔㜟➈Ѷ For more detailed instructions, please visit our official Wiki and select Makera Z1ʛˍʤʙˍʤ˃˥ˢʜ 㬊忚勅㣥⎔忨㨥瑅快徳槞㘭⌤䪉馬㧐8JLJ㊓揺㜁.BLFSB;睞瑁;;1SP瑂Ѷ wiki.makera.com The latest this guide is available on our website. If you encounter any issues, feel free to contact us. 㬕㧇䪉㭀㜟➈⠝⭐馬卐垳⠅Ѷⶤ⭐⎷䤭掸丌≥搸♤⌳⎍槞沃瑅㼳掿橾㨍呓僺㘭⌤Ѷ www.makera.com/support 7. Your First Job 涁㼲⛔(ᄇ) Your ˀ˔˞ ̆˥˔ˍʤʛˍʤʙˍʤ˃˥ˢʜ is ready—time for your first job! Scan the QR code below or visit makerables.com/OfficialTutorials to choose an official tutorial project. Follow the specified tools, materials, workholding method, and machine settings (all required tools and materials are inclu…

Text truncated - open the document above for the full version.

Internal Photos

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 1 of 44 EUT INTERNAL PHOTOGRAPHS Model: Z1 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 2 of 44 BLE/Wi-Fi ANT Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 3 of 44 NEMA 17 Open-loop Stepper Motor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 4 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 5 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 6 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 7 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 8 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 9 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 10 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 11 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 12 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 13 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 14 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 15 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 16 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 17 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 18 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 19 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 20 of 44 DRV8825 Stepper Motor Driver Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 21 of 44 Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-INP Page 22 of 44

Test Setup Photos

Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-TSP Page 1 of 4 TEST SETUP PHOTOGRAPHS Conducted Emissions - Front View Conducted Emissions - Side View Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-TSP Page 2 of 4 Radiated Emissions View (Below 30MHz) Radiated Emissions View (Below 1 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-TSP Page 3 of 4 Radiated Emissions View (1-18 GHz) Radiated Emissions View (18-25 GHz) Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RF-TSP Page 4 of 4 RF Conducted View

Test Report

ANTENNA TEST REPORT Manufacturer: Huaibei Makera Technology Co., Ltd Address: 1st floor, building C1, e-commerce Industrial Park, Suixi Economic Development Zone, Suixi County, Huaibei City, Anhui Province, China Product Name: LED-MID-WiFi-Ant Product Model: LED-MID-WiFi-Ant Report Number: 2503U66989E-RF Date Of Issue: 2025/7/3 Reviewed : Title: Approved By: Luke Yuan OTA Engineer SunZhong Title: Manager Test Laboratory: China Certification ICT Co., Ltd (Dongguan) No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China Tel: +86-769-83085888 www.ccttt.com.cn China Certification ICT Co., Ltd (Dongguan) Report No.: 2503U66989E-RF Page 2 of 13 Test Facility The Test site used by China Certification ICT Co., Ltd (Dongguan) to collect test data is located on the No. 113, Pingkang Road, Dalang Town, Dongguan, Guangdong, China. Declarations China Certification ICT Co., Ltd (Dongguan) is not responsible for the authenticity of any test data provided by the applicant. Data included from the applicant that may affect test results are marked with a triangle symbol “▲”. Customer model name, addresses, names, trademarks etc. are not considered data. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report cannot be reproduced except in full, without prior written approval of the Company. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report may contain data that are not covered by the accreditation scope and shall be marked with an asterisk “★”. Each test item follows the test standard(s) without deviation. China Certification ICT Co., Ltd (Dongguan) Report No.: 2503U66989E-RF Page 3 of 13 CONTENTS DOCUMENT REVISION HISTORY .......................................................................................... 4 1. GENERAL INFORMATION .................................................................................................... 5 2. TEST CONFIGURATIONS ...................................................................................................... 6 2.1 TEST ENVIRONMENT ........................................................................................................................... 6 2.2 TEST EQUIPMENT ................................................................................................................................ 6 2.3 TEST SPECIFICATION ........................................................................................................................... 6 2.4 TEST UNCERTAINTY ............................................................................................................................ 6 2.5 TEST MEASUREMENT SYSTEM ............................................................................................................ 7 2.6 TEST SETUP .......................................................................................................................................... 7 2.6.1 Antenna Gain, Efficiency and Radiation Pattern Test Setup ............................................................ 7 3. TEST RESULTS ......................................................................................................................... 8 3.1 GAIN AND EFFICIENCY ........................................................................................................................ 8 3.2 RADIATION PATTERN .......................................................................................................................... 9 4. EUT PHOTOGRAPHS ............................................................................................................ 12 5. TEST SETUP PHOTOGRAPHS ............................................................................................ 13 China Certification ICT Co., Ltd (Dongguan) Report No.: 2503U66989E-RF Page 4 of 13 DOCUMENT REVISION HISTORY Revision Number Report Number Description of Revision Date of Revision 1.0 2503U66989E-RF Original Report 2025/7/3 China Certification ICT Co., Ltd (Dongguan) Report No.: 2503U66989E-RF Page 5 of 13 1. GENERAL INFORMATION Product Name: LED-MID-WiFi-Ant Product Model: LED-MID-WiFi-Ant Antenna Type: PCB Test Items: Gain; Efficiency; Radiation Pattern Test Frequency (MHz): 2400, 2440, 2480 Sample Number: 35JI-1 EUT Received Date: 2025.6.30 EUT Received Status: Good China Certification ICT Co., Ltd (Dongguan) Report No.: 2503U66989E-RF Page 6 of 13 2. TEST CONFIGURATIONS 2.1 Test Environment Temperature (°C) 26 Humidity (%RH) 54 Atmospheric Pressure (kPa) 100.3 Tester Leo Li Test Date 2025/7/1 2.2 Test Equipment Manufacturer Description Model Serial Number Calibration Date Calibrate Due Date R&S Vector Network Analyze r ZNB-8 13116010441042502025/2/10 2026/2/9 R&S Cross-Pol.Vivald i-ANT TC-TA18200256 N/A N/A R&S Switch ControllerOSP320 1528.3111K02\10 1442 N/A N/A R&S Switch ControllerOSP320 1528.3105K03\10 1666 N/A N/A maturo Turntable controllers NCD/536/ 3082..01 N/A N/A N/A R&S Test Software AMS32 11.40.00 N/A N/A R&S Test System TS8991 N/A N/A N/A * Statement of Traceability: China Certification ICT Co., Ltd (Dongguan) attests that all calibrations have been performed, traceable to National Primary Standards and International System of Units (SI). 2.3 Test Specification IEEE Std 149-2021 2.4 Test Uncertainty Otherwise required by the applicant or Product Regulations, Decision Rule in this report did not consider the uncertainty. The extended uncertainty given in this report is obtained by combining the standard uncertainty times the coverage factor K with the 95% confidence interval. Parameter Measurement Uncertainty Passive 1.82 dB VSWR(S11) 0.57 dB China Certification ICT Co., Ltd (Dongguan) Report No.: 2503U66989E-RF Page 7 of 13 2.5 Test Measurement System Conical-cut method is used to measure EUT in OTA qualified anechoic chamber. The Conical Cut method requires the ability of the Measurement Ant…

Text truncated - open the document above for the full version.

Test Report

Note: The information marked # is provided by the applicant, the laboratory is not responsible for its authenticity and this information can affect the validity of the result in the test report. Customer model name, addresses, names, trademarks etc. are included. This report cannot be reproduced except in full, without prior written approval of the Company. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested. This report is valid only with a valid digital signature. The digital signature may be available only under the Adobe software above version 7.0. This report must not be used by the customer to claim product certification, approval, or endorsement by NVLAP or any agency of the U.S. Government. This report may contain data that are not covered by the NVLAP accreditation and are marked with an asterisk “▼”. Bay Area Compliance Laboratories Corp. (Shenzhen) 5F(B-West) , 6F, 7F, the 3rd Phase of Wan Li Industrial Building D, Shihua Rd, FuTian Free Trade Zone, Shenzhen, China Tel: +86-755-33320018 Fax: +86-755-33320008 www.baclcorp.com.cn TR-EM-RF011 Page 1 of 69 Version 4.2 TEST REPORT Applicant Name:Huaibei Makera Technology Co., Ltd Address:1st floor, building C1, e-commerce Industrial Park, Suixi Economic Development Zone, Suixi County, Huaibei City, Anhui Province, China Report Number:2601Q23304E-RFB FCC ID:2A8Z8-Z1 IC:29569-Z1 Test Standard (s) FCC PART 15.247; RSS-GEN ISSUE 5, FEBRUARY 2021 AMENDMENT 2; RSS-247 ISSUE 4, JULY 2025 Sample Description Product Type:Makera Z1 Desktop CNC Machine Model No.:Z1 Multiple Model(s) No.:Z1Pro Trade Mark: Makera Carvera Date Received:2026-03-02 Issue Date:2026-05-18 Test Result:Pass ▲ ▲ In the configuration tested, the EUT complied with the standards above. Prepared and Checked By:Approved By: Wills YuNancy Wang RF EngineerRF Supervisor Bay Area Compliance Laboratories Corp. (Shenzhen) Report No.: 2601Q23304E-RFB TR-EM-RF011 Page 2 of 69 Version 4.2 TABLE OF CONTENTS DOCUMENT REVISION HISTORY ..........................................................................................................................3 GENERAL INFORMATION ........................................................................................................................................4 PRODUCT DESCRIPTION FOR EQUIPMENT UNDER TEST (EUT)......................................................................................4 OBJECTIVE ....................................................................................................................................................................4 TEST METHODOLOGY....................................................................................................................................................4 MEASUREMENT UNCERTAINTY .....................................................................................................................................5 TEST FACILITY ..............................................................................................................................................................5 SYSTEM TEST CONFIGURATION ...........................................................................................................................6 SUMMARY OF TEST RESULTS ................................................................................................................................9 TEST EQUIPMENT LIST ..........................................................................................................................................10 REQUIREMENTS AND TEST PROCEDURES ......................................................................................................12 AC LINE CONDUCTED EMISSIONS...............................................................................................................................12 UNWANTED EMISSION FREQUENCIES AND RESTRICTED BANDS .................................................................................15 99% OCCUPIED BANDWIDTH & 6 DB EMISSION BANDWIDTH ....................................................................................18 PEAK OUTPUT POWER MEASUREMENT .......................................................................................................................21 POWER SPECTRAL DENSITY ........................................................................................................................................22 100 KHZ BANDWIDTH OF FREQUENCY BAND EDGE....................................................................................................24 CONDUCTED SPURIOUS EMISSION...............................................................................................................................26 DUTY CYCLE ...............................................................................................................................................................28 RF EXPOSURE EVALUATION ................................................................................................................................29 ANTENNA REQUIREMENT .....................................................................................................................................32 TEST DATA AND RESULTS .....................................................................................................................................34 AC LINE CONDUCTED EMISSIONS...............................................................................................................................34 UNWANTED EMISSION FREQUENCIES AND RESTRICTED BANDS .................................................................................37 6DB EMISSION BANDWIDTH........................................................................................................................................57 99% OCCUPIED BANDWIDTH ..............................................................................................................................…

Text truncated - open the document above for the full version.

Test Report

Text truncated - open the document above for the full version.

Contact Information

Applicant

ZHANG QIUXI(CEO)

[email protected]Fax: 0561-6066386

Technical Contact

IconsighBenjamin Kaur

[email protected]

2310 Homestead Road Suite C1 · Los Altos, California, 94024 · United States

Test Firm

Bay Area Compliance Laboratories Corp (Shenzhen)Nana Liu

[email protected]

Technical Specifications

#	Rule Parts	Frequency Range	Power Output
1	15C	2.41 GHz - 2.46 GHz	284.00 mW
2	15C	2.40 GHz - 2.48 GHz	4.00 mW

Confidentiality

Long Term

Grant Notes

Output power listed is peak conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with instructions and operating conditions for satisfying RF exposure compliance. This device supports 20 MHz and 40 MHz bandwidth modes.