2A938-PNGR06NWS1Dual Band Gigabit Router

Pint u r a A P Instruction P owerUSB LAN1LAN2 LAN3 LAN4WAN R ESETA n tenna 1. Product Introduction AP is used to transmit photos or videos. Its main components are as follows: After powering the AP on and waiting for 2 ~ 3 minutes, the indicator lights of 2.4G and 5G all light up,which indicate the device has started. 2. 4 G i n dicator light 5G i n d icator light Note: Power on the AP first, and then power on Pintura. 2 . Steps FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOT E: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help.

Jiangsu Austin Optronics Technology Co.,LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Product Name: Dual Band Gigabit Router FCC ID: 2A938-PNGR06NWS1 Model(s): PNGR06NWS1 2.911(d)(5)(i) Equipment Type We, [Jiangsu Austin Optronics Technology Co.,LTD] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Lan Zhu Date:2023.02.24 Title and Company name: QS / Jiangsu Austin Optronics Technology Co.,LTD NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu Austin Optronics Technology Co.,LTD 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Product Name: Dual Band Gigabit Router FCC ID: 2A938-PNGR06NWS1 Model(s): PNGR06NWS1 2.911(d)(5)(ii) Applicant filing We, [Jiangsu Austin Optronics Technology Co.,LTD] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Lan Z hu Date: 2023.02.24 Title and Company name: QS / Jiangsu Austin Optronics Technology Co.,LTD NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu Austin Optronics Technology Co.,LTD Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Series Models Description Date: 2023/02/24 Dear Sir/Madam, We, Jiangsu Austin Optronics Technology Co.,LTD Hereby declares the following statement for CE/FCC/MIC certificate, PCB board, Schematic, Hardware version, Software version, structure and internal photos are same except for the model’s name; named differently due to marketing purposes. Product name: Dual Band Gigabit Router Model no.: PNGR06NWS1 Signature: Name / Title: Lan Zhu / QS Company: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Phone: 15251733445 Fax: / E-Mail: [email protected]

Jiangsu Austin Optronics Technology Co.,LTD Agent Authorization Company: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Product Name: Dual Band Gigabit Router Trade Mark: N/A Model Number(s): PNGR06NWS1 FCC ID: 2A938-PNGR06NWS1 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-02-24 Name: Lan Zhu Title: QS Company: Jiangsu Austin Optronics Technology Co.,LTD

Jiangsu Austin Optronics Technology Co.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-02-24 Subject; Request for Confidentiality FCC ID: 2A938-PNGR06NWS1 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name / Title: Lan Zhu / QS Company: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Phone: 15251733445 Fax: / E-Mail: [email protected]

FCC ID: 2A938-PNGR06NWS1 Fig. 1 Fig. 2 2.4GWLAN Antenna 0 2.4GWLAN Antenna 1 5GWLAN Antenna 3 5GWLAN Antenna 2 FCC ID: 2A938-PNGR06NWS1 Fig. 3 Fig. 4 FCC ID: 2A938-PNGR06NWS1 Fig. 5 Fig. 6 FCC ID: 2A938-PNGR06NWS1 Fig. 7 Fig. 8

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L7.08cm x 2.58cm) Label Location

FCC ID: 2A938-PNGR06NWS1 Fig. 1 Fig. 2 FCC ID: 2A938-PNGR06NWS1 Fig. 3 Fig. 4 FCC ID: 2A938-PNGR06NWS1 Fig. 5 Fig. 6 FCC ID: 2A938-PNGR06NWS1 Fig. 7

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong RF Exposure evaluation Report Reference No...................... : FCC ID. ............................................ : GTS20221226006-1-4 2A938-PNGR06NWS1 Compiled by ( position+printed name+signature) . : File administrators Peter Xiao Supervised by ( position+printed name+signature) . : Test Engineer Jenny Zeng Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue .................................... : Feb. 13, 2023 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name ............................ : Jiangsu Austin Optronics Technology Co.,LTD Address ............................................ : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Test specification ........................... : Standard ........................................... : 47CFR §1.1310 Basis and purpose 47CFR §2.1091 Radiofrequency radiation exposure evaluation: mobile devices KDB447498 D01 General RF Exposure Guidance v06 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Dual Band Gigabit Router Trade Mark ....................................... : N/A Manufacturer .................................... : Jiangsu Austin Optronics Technology Co.,LTD Model/Type reference ...................... : PNGR06NWS1 Listed Models .................................. : N/A Operation Frequency........................ : From 2412MHz to 2462MHz, 5180MHz to 5240MHz, 5745MHz to 5825MHz Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 12.0V/1.0A by Adapter Result ............................................... : PASS Report No.: GTS20221226006-1-4 Page 2 of 23 T E S T R E P O R T Test Report No. : GTS20221226006-1-4 Feb. 13, 2023 ______________________________________________________________________________________________ Date of issue Equipment under Test : Dual Band Gigabit Router Model /Type : PNGR06NWS1 Listed model : N/A Applicant : Jiangsu Austin Optronics Technology Co.,LTD Address : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Manufacturer : Jiangsu Austin Optronics Technology Co.,LTD Address : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20221226006-1-4 Page 3 of 23 Contents 1. SUMMARY .................................................................................................................................................... 4 1.1 EUT CONFIGURATION .................................................................................................................................... 4 1.2 PRODUCT DESCRIPTION ................................................................................................................................ 4 2. TEST ENVIRONMENT .................................................................................................................................. 4 2.1 ADDRESS OF THE TEST LABORATORY .............................................................................................................. 5 2.2 TEST FACILITY ............................................................................................................................................... 5 2.3 ENVIRONMENTAL CONDITIONS ........................................................................................................................ 5 2.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY .......................................................................................... 5 3. METHOD OF MEASUREMENT ................................................................................................................... 6 3.1 APPLICABLE STANDARD ................................................................................................................................. 6 3.2 REQUIREMENT .............................................................................................................................................. 6 3.3 LIMIT ............................................................................................................................................................. 6 3.4 MPE CALCULATION METHOD ......................................................................................................................... 7 3.5 ANTENNA INFORMATION ................................................................................................................................. 7 4. CONDUCTED POWER RESULTS ............................................................................................................... 8 5. MANUFACTURING TOLERANCE ..............................................…

Text truncated - open the document above for the full version.

SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 1 页共 10 页 HeadquartersAddress:BuildingC,HongyuGuangmingValley,No.11,YoumaGangRoad,MaTianStreet, GuangmingDistrict,Shenzhen DongguanBranch:YingjiaInnovationIndustrialPark,No.2Yinhe3rdRoad,Shishuikou,QiaotouTown,Dongguan CityHangzhouOffice:212,BuildingB,DahuaJianghongInternationalInnovationPark,No.369,InternetofThings Street,BinjiangDistrict,Hangzhou MianyangOffice:No.4F-34WanxiangHigh-techInternational,No.35MianxingEastRoad,GaoxinDistrict,Mianyang City,SichuanProvince Tel:0755-27810060Fax:0755-27810057Website:www.szsyjc.com CUSTOMERNAME CUSTOMERP/N PARTNAME2.4GspecialwhiteintegratedantennaL=165mm P/NYJC-6C165-W01 APPROVALREV.A0 DELIVERYDATEFebruary08,2023 PREPAREDBY WuJiaxiong CHECKEDBY FangWenfeng APPROVEDBYChauhan CustomerApproved PreparedByCheckedByApprovedBy SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 2 页共 10 页 Catalogue 1、COVER··················································································1 2、Catalogue··············································································2 3、Resumer················································································3 4、Antennaplan···········································································4 5、Antennatechnicalparametersandenvironmentalperformancetesting··················5 6、Antennaobjectdiagram································································6 7、Antennaperformancetest······························································6 8、2D.3DTestData(2.4)································································7-8 9、Wirespecificationparameters························································9 10、ROHSmaterialcontrolreport·························································10 SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 3 页共 10 页 Resumer： Version Changecontentsandreasons DateIssue A0NEWFebruary08,2023 SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 4 页共 10 页 Antennaplan: SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO., LTD http://www.szsyjc.com 第 5 页 共 10 页 Antennatechnicalparametersand environmentalperformancetesting Technicalparametersof electricalappliances ElectricalSpecificationsMechanicalSpecifications FrequencyRange2400-2500MHzAntennacolorWhite VSWR＜1.92Input connectorXD Input Impedance50 ΩWirelength165 mm DirectionAllWorkingTemperature-2 0°C~+ 70°C Gain4 .87dBiWorkingHumidity20 %~80% Environmentalperformancetesting: ProjectTestconditionStandard Storage Conditions Intheabsenceofspecifiedtest temperature,humidity,airpressureis as follows:: 1.Temperatureis - 30°C~ + 80°C 2.Relativehumidityof45%to45% 3.Airpressureis 86kpato106kpa Electricalandmechanical performaceis normal Highand low temperature test Between70°Cand-20°Cfor5 loops, then1-2h undernormalconditions,check theappearancequality. Sizeshouldmeetthe requirementsandmeet theperformanceof mechinery andelectric. Constant dampand hot resistance test 95+ / - 3%relativehumidity,temperature test:40°C.Lasts2 h after,trytotakeout thedeterminationofelectricalproperties, within5 minaftertry1-2h underarticle normalthing,checktheappearance quality Sizeshouldmeetthe requirementsandmeet theperformanceof mechinery andelectric. vibration test 10-55hz,vibrationfrequencyrangeof displacementamplitude:0.35MM, accelerationamplitude:50.0M/S,sweep cycles:30times Electricalandmechanical performaceis normal Falldown test 1 mhighaltitudein accordancewiththe perpendicularaxisfreedrop3 times Electricalandmechanical performaceis normal SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 6 页共 10 页 Actualpictureofantenna: Antennaperformancetestdiagram: SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO., LTD http://www.szsyjc.com 第 7 页 共 10 页 2D.3DTest Data： （2.4G )T est Data : FrequencyEfficiency(%)Gain.(dBi) 2400MHz 66.034.63 2410MHz69.25 4.80 2420MHz64.644.67 2430MHz65.514.87 2440MHz62.444.72 2450MHz 63.284.82 2460MHz 61.154.77 2470MHz59.504.62 2480MHz59.874.63 2490MHz59.714.72 2500MHz61.234.80 Phi 0 2D图: Phi 90 2D 图 Theta 90 2D 图 3D 2400： SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 8 页共 10 页 3D2450： 3D2500： SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 9 页共 10 页 产品规格ProductType1.13线 结构图StructureDrawing 结构特性StructureCharacteristics 结构Structure项目Item标准值StandardValue 内导体 InnerConductor 材质Material镀银铜线Silverplatedcopperwire 构成(根/mm/Composition(No./mm) 7/0.08±0.005 标称外径Nom.Dia(mm)Φ0.24±0.01 绝缘层 Insulation 材质Material聚全氟乙丙烯/FEP 标称外径Nom.Dia(mm)Φ0.7±0.03 外导体 OuterConductor 材质Material镀锡铜线Tinnedcopper 形式From编织/Weaving 遮蔽率/Shieldingrate≧90% 标称外径Nom.Dia(mm)Φ0.92±0.03 护套 Jacket 材质Material聚全氟乙丙烯/FEP 标称外径Nom.Dia(mm)Φ1.13±0.05 电气性能ElectricalCharacteristics 项目Item 标准值 StandardValue 项目Item 频率 Frequency 标准值 StandardValue 阻抗Impedance（Ω）50±3 衰减 Attenuation@20 °C (dB/100m) 1GHz ≤2.23 电容Capacitance(pF/m)98 2GHz ≤3.15 抗拉强度 Tensilestrengthkgf/mm² 1.76 3GHz ≤3.96 驻波比VSWR ≤1.40@0-6GHz GHz 4GHz ≤4.6 耐压强度 DielectricStrength（A.CV/1min) 1000 5GHz ≤5.15 最大工作频率（MHz） Max.oper.frequency 6000 6GHz ≤5.7 可靠性Dependability 最小弯曲半径(单次)Min.BendingRadius/Singlemm4 最小弯曲半径（重复）Min.BendingRadius/Repeatedmm8 工作温度范围OperatingTemperature°C-20~+80 包装Packing 包装方式PackingMode1000（m/盘）成卷Reel 使用提示TripsforUse 存储环境StorageEnvironment温度：30°C以下，湿度：20-65% 铁氟龙收缩 TeflonShrink 绝缘层收缩≦0.2mm；护套层收缩≦0.3mm 加工温度 Processingtemperature 250°C~260°C的情况下，可短时间承受；300°C以上会出现热分解现象 最佳保存周期 Thebestsavecycle 2个月，2个月以上锡效果变差,但电性能不受影响，夏季高温高湿环境开剥后需尽快流转 SHENZHENYINGJIACHUANGELECTRONICTECHNOLOGYCO.,LTD http://www.szsyjc.com 第 10 页共 10 页 MaterialRoHSconformitydeclarationform Weherebycertifythattherawmaterialsusedandtheadditivesintheproductionengineeringoftheproductstoyourcompanyare conformedtotheRoHSenvironmentalrequiremetns.(RoHSdirective2011/65/EU) Aboutthereportofcompositionofrawmaterials,packagingmaterialsandadditivesusedintheproductionprocessforcomponents andauxiliarymaterialsisasbellow: Component /PartName Mat…

Text truncated - open the document above for the full version.

Case No. : GTS20221226006-1-2 Ambient Condition: 25 °C, 45 %RH, Atmos100.1Kpa, Test Date: 2023.1.31 Test Engineer: Jenny zeng Appendix A.1: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant0 2412 8.080 2408.000 2416.080 0.5 PASS 2437 8.000 2433.040 2441.040 0.5 PASS 2462 8.120 2457.960 2466.080 0.5 PASS 11G Ant0 2412 15.680 2404.480 2420.160 0.5 PASS 2437 15.680 2429.120 2444.800 0.5 PASS 2462 15.000 2454.520 2469.520 0.5 PASS 11N20SISO Ant0 2412 13.920 2405.680 2419.600 0.5 PASS 2437 16.040 2429.480 2445.520 0.5 PASS 2462 15.040 2454.520 2469.560 0.5 PASS 11N40SISO Ant0 2422 33.840 2404.480 2438.320 0.5 PASS 2437 35.120 2419.480 2454.600 0.5 PASS 2452 35.120 2434.480 2469.600 0.5 PASS 11AX20SISO Ant0 2412 18.000 2403.240 2421.240 0.5 PASS 2437 18.040 2428.280 2446.320 0.5 PASS 2462 17.720 2452.960 2470.680 0.5 PASS 11AX40SISO Ant0 2422 35.040 2404.480 2439.520 0.5 PASS 2437 36.000 2419.560 2455.560 0.5 PASS 2452 35.120 2434.480 2469.600 0.5 PASS Test Graphs 11B_Ant0_2412 11B_Ant0_2437 11B_Ant0_2462 11G_Ant0_2412 11G_Ant0_2437 11G_Ant0_2462 11N20SISO_Ant0_2412 11N20SISO_Ant0_2437 11N20SISO_Ant0_2462 11N40SISO_Ant0_2422 11N40SISO_Ant0_2437 11N40SISO_Ant0_2452 11AX20SISO_Ant0_2412 11AX20SISO_Ant0_2437 11AX20SISO_Ant0_2462 11AX40SISO_Ant0_2422 11AX40SISO_Ant0_2437 11AX40SISO_Ant0_2452 Appendix A.2: Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant0 2412 12.906 2405.637 2418.543 --- --- 2437 12.902 2430.608 2443.510 --- --- 2462 12.821 2455.600 2468.421 --- --- 11G Ant0 2412 16.812 2403.634 2420.446 --- --- 2437 16.778 2428.666 2445.444 --- --- 2462 16.798 2453.614 2470.412 --- --- 11N20SISO Ant0 2412 17.781 2403.182 2420.963 --- --- 2437 17.775 2428.143 2445.918 --- --- 2462 17.817 2453.107 2470.924 --- --- 11N40SISO Ant0 2422 36.029 2404.061 2440.090 --- --- 2437 36.066 2419.076 2455.142 --- --- 2452 37.469 2433.329 2470.798 --- --- 11AX20SISO Ant0 2412 18.942 2402.577 2421.519 --- --- 2437 19.114 2427.487 2446.601 --- --- 2462 19.027 2452.525 2471.552 --- --- 11AX40SISO Ant0 2422 37.594 2403.254 2440.848 --- --- 2437 37.560 2418.315 2455.875 --- --- 2452 37.634 2433.225 2470.859 --- --- Test Graphs 11B_Ant0_2412 11B_Ant0_2437 11B_Ant0_2462 11G_Ant0_2412 11G_Ant0_2437 11G_Ant0_2462 11N20SISO_Ant0_2412 11N20SISO_Ant0_2437 11N20SISO_Ant0_2462 11N40SISO_Ant0_2422 11N40SISO_Ant0_2437 11N40SISO_Ant0_2452 11AX20SISO_Ant0_2412 11AX20SISO_Ant0_2437 11AX20SISO_Ant0_2462 11AX40SISO_Ant0_2422 11AX40SISO_Ant0_2437 11AX40SISO_Ant0_2452 Appendix A.3: Maximum conducted output power Test Result Peak TestMode Antenna Frequency[M Hz] Peak Powert[dBm] Conducted Limit[dBm] Verdict 11B Ant0 2412 15.90 ≤30.00 PASS 2437 16.90 ≤30.00 PASS 2462 18.66 ≤30.00 PASS 11G Ant0 2412 17.76 ≤30.00 PASS 2437 18.54 ≤30.00 PASS 2462 20.17 ≤30.00 PASS 11N20SISO Ant0 2412 17.50 ≤30.00 PASS 2437 18.40 ≤30.00 PASS 2462 20.01 ≤30.00 PASS 11N40SISO Ant0 2422 17.60 ≤30.00 PASS 2437 18.40 ≤30.00 PASS 2452 19.24 ≤30.00 PASS 11AX20SISO Ant0 2412 18.50 ≤30.00 PASS 2437 19.26 ≤30.00 PASS 2462 20.93 ≤30.00 PASS 11AX40SISO Ant0 2422 17.93 ≤30.00 PASS 2437 19.74 ≤30.00 PASS 2452 19.02 ≤30.00 PASS Appendix A.4: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant0 2412 -9.85 ≤8.00 PASS 2437 -8.8 ≤8.00 PASS 2462 -7.01 ≤8.00 PASS 11G Ant0 2412 -13.58 ≤8.00 PASS 2437 -12.27 ≤8.00 PASS 2462 -11.72 ≤8.00 PASS 11N20SISO Ant0 2412 -14.37 ≤8.00 PASS 2437 -13.09 ≤8.00 PASS 2462 -11.76 ≤8.00 PASS 11N40SISO Ant0 2422 -16.89 ≤8.00 PASS 2437 -16.04 ≤8.00 PASS 2452 -17.12 ≤8.00 PASS 11AX20SISO Ant0 2412 -14.99 ≤8.00 PASS 2437 -14.82 ≤8.00 PASS 2462 -13.02 ≤8.00 PASS 11AX40SISO Ant0 2422 -18.39 ≤8.00 PASS 2437 -16.65 ≤8.00 PASS 2452 -18.05 ≤8.00 PASS Test Graphs 11B_Ant0_2412 11B_Ant0_2437 11B_Ant0_2462 11G_Ant0_2412 11G_Ant0_2437 11G_Ant0_2462 11N20SISO_Ant0_2412 11N20SISO_Ant0_2437 11N20SISO_Ant0_2462 11N40SISO_Ant0_2422 11N40SISO_Ant0_2437 11N40SISO_Ant0_2452 11AX20SISO_Ant0_2412 11AX20SISO_Ant0_2437 11AX20SISO_Ant0_2462 11AX40SISO_Ant0_2422 11AX40SISO_Ant0_2437 11AX40SISO_Ant0_2452

Appendix A.5: Band edge measurements Test Result TestMode Antenna ChName Frequency[MHz] RefLevel[dBm] Result[dBm] Limit[dBm] Verdict 11B Ant0 Low 2412 4.94 -42.73 ≤-15.06 PASS High 2462 7.87 -48.98 ≤-12.13 PASS 11G Ant0 Low 2412 0.42 -44.72 ≤-19.58 PASS High 2462 3.07 -49.03 ≤-16.93 PASS 11N20SISO Ant0 Low 2412 -0.31 -44.05 ≤-20.31 PASS High 2462 2.79 -48.8 ≤-17.21 PASS 11N40SISO Ant0 Low 2422 -2.65 -43.7 ≤-22.65 PASS High 2452 -1.97 -48.05 ≤-21.97 PASS 11AX20SISO Ant0 Low 2412 0.01 -45.51 ≤-19.99 PASS High 2462 2.30 -48.44 ≤-17.71 PASS 11AX40SISO Ant0 Low 2422 -3.34 -45.6 ≤-23.34 PASS High 2452 -2.17 -49.19 ≤-22.17 PASS Test Graphs 11B_Ant0_Low_2412 11B_Ant0_High_2462 11G_Ant0_Low_2412 11G_Ant0_High_2462 11N20SISO_Ant0_Low_2412 11N20SISO_Ant0_High_2462 11N40SISO_Ant0_Low_2422 11N40SISO_Ant0_High_2452 11AX20SISO_Ant0_Low_2412 11AX20SISO_Ant0_High_2462 11AX40SISO_Ant0_Low_2422 11AX40SISO_Ant0_High_2452 Appendix A.6: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant0 2412 Reference 3.46 3.46 --- PASS 30~1000 3.46 -60.01 ≤-16.54 PASS 1000~26500 3.46 -48.37 ≤-16.54 PASS 2437 Reference 3.65 3.65 --- PASS 30~1000 3.65 -59.57 ≤-16.35 PASS 1000~26500 3.65 -47.81 ≤-16.35 PASS 2462 Reference 6.90 6.90 --- PASS 30~1000 6.90 -59.84 ≤-13.1 PASS 1000~26500 6.90 -47.16 ≤-13.1 PASS 11G Ant0 2412 Reference -0.89 -0.89 --- PASS 30~1000 -0.89 -59.64 ≤-20.89 PASS 1000~26500 -0.89 -47.68 ≤-20.89 PASS 2437 Reference -0.69 -0.69 --- PASS 30~1000 -0.69 -60.13 ≤-20.69 PASS 1000~26500 -0.69 -47.68 ≤-20.69 PASS 2462 Reference 1.25 1.25 --- PASS 30~1000 1.25 -60.22 ≤-18.75 PASS 1000~26500 1.25 -47.79 ≤-18.75 PASS 11N20SISO Ant0 2412 Reference -3.90 -3.90 --- PASS 30~1000 -3.90 -60.91 ≤-23.9 PASS 1000~26500 -3.90 -47.71 ≤-23.9 PASS 2437 Reference -0.42 -0.42 --- PASS 30~1000 -0.42 -60.62 ≤-20.42 PASS 1000~26500 -0.42 -46.81 ≤-20.42 PASS 2462 Reference 1.96 1.96 --- PASS 30~1000 1.96 -60.48 ≤-18.04 PASS 1000~26500 1.96 -47.43 ≤-18.04 PASS 11N40SISO Ant0 2422 Reference -3.15 -3.15 --- PASS 30~1000 -3.15 -60.52 ≤-23.15 PASS 1000~26500 -3.15 -47.8 ≤-23.15 PASS 2437 Reference -2.52 -2.52 --- PASS 30~1000 -2.52 -60.16 ≤-22.52 PASS 1000~26500 -2.52 -48.04 ≤-22.52 PASS 2452 Reference -2.80 -2.80 --- PASS 30~1000 -2.80 -60.27 ≤-22.8 PASS 1000~26500 -2.80 -47.29 ≤-22.8 PASS 11AX20SISO Ant0 2412 Reference -1.80 -1.80 --- PASS 30~1000 -1.80 -60.31 ≤-21.8 PASS 1000~26500 -1.80 -47.88 ≤-21.8 PASS 2437 Reference -3.06 -3.06 --- PASS 30~1000 -3.06 -60.74 ≤-23.06 PASS 1000~26500 -3.06 -47.88 ≤-23.06 PASS 2462 Reference 0.80 0.80 --- PASS 30~1000 0.80 -60.61 ≤-19.2 PASS 1000~26500 0.80 -47.92 ≤-19.2 PASS 11AX40SISO Ant0 2422 Reference -4.84 -4.84 --- PASS 30~1000 -4.84 -60.03 ≤-24.84 PASS 1000~26500 -4.84 -47.74 ≤-24.84 PASS 2437 Reference -2.07 -2.07 --- PASS 30~1000 -2.07 -56.09 ≤-22.07 PASS 1000~26500 -2.07 -46.53 ≤-22.07 PASS 2452 Reference -2.33 -2.33 --- PASS 30~1000 -2.33 -58.87 ≤-22.33 PASS 1000~26500 -2.33 -47.68 ≤-22.33 PASS Test Graphs 11B_Ant0_2412_0~Reference 11B_Ant0_2412_30~1000 11B_Ant0_2412_1000~26500 11B_Ant0_2437_0~Reference 11B_Ant0_2437_30~1000 11B_Ant0_2437_1000~26500 11B_Ant0_2462_0~Reference 11B_Ant0_2462_30~1000 11B_Ant0_2462_1000~26500 11G_Ant0_2412_0~Reference 11G_Ant0_2412_30~1000 11G_Ant0_2412_1000~26500 11G_Ant0_2437_0~Reference 11G_Ant0_2437_30~1000 11G_Ant0_2437_1000~26500 11G_Ant0_2462_0~Reference 11G_Ant0_2462_30~1000 11G_Ant0_2462_1000~26500 11N20SISO_Ant0_2412_0~Reference 11N20SISO_Ant0_2412_30~1000 11N20SISO_Ant0_2412_1000~26500 11N20SISO_Ant0_2437_0~Reference 11N20SISO_Ant0_2437_30~1000 11N20SISO_Ant0_2437_1000~26500 11N20SISO_Ant0_2462_0~Reference 11N20SISO_Ant0_2462_30~1000 11N20SISO_Ant0_2462_1000~26500 11N40SISO_Ant0_2422_0~Reference 11N40SISO_Ant0_2422_30~1000 11N40SISO_Ant0_2422_1000~26500 11N40SISO_Ant0_2437_0~Reference 11N40SISO_Ant0_2437_30~1000 11N40SISO_Ant0_2437_1000~26500 11N40SISO_Ant0_2452_0~Reference 11N40SISO_Ant0_2452_30~1000 11N40SISO_Ant0_2452_1000~26500 11AX20SISO_Ant0_2412_0~Reference 11AX20SISO_Ant0_2412_30~1000 11AX20SISO_Ant0_2412_1000~26500 11AX20SISO_Ant0_2437_0~Reference 11AX20SISO_Ant0_2437_30~1000 11AX20SISO_Ant0_2437_1000~26500 11AX20SISO_Ant0_2462_0~Reference 11AX20SISO_Ant0_2462_30~1000 11AX20SISO_Ant0_2462_1000~26500 11AX40SISO_Ant0_2422_0~Reference 11AX40SISO_Ant0_2422_30~1000 11AX40SISO_Ant0_2422_1000~26500 11AX40SISO_Ant0_2437_0~Reference 11AX40SISO_Ant0_2437_30~1000 11AX40SISO_Ant0_2437_1000~26500 11AX40SISO_Ant0_2452_0~Reference 11AX40SISO_Ant0_2452_30~1000 11AX40SISO_Ant0_2452_1000~26500

Case No. : GTS20221226006-1-2 Ambient Condition: 25 °C, 45 %RH, Atmos100.1Kpa, Test Date: 2023.1.31 Test Engineer: Jenny zeng Appendix A.1: …

Text truncated - open the document above for the full version.