2A938-PNM101LF11pintura display unit

FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOT E: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help.

Jiangsu Austin Optronics Technology Co.,LTD 2.911 (d)(5)(i) Equipment Type Attestation v1.2 Section 2.911(d)(5)(i) Certification – Equipment Type Company name: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Product Name: pintura display unit FCC ID: 2A938-PNM101LF11 Model(s): PNM101LF11, PNM101LF12, PNM133LF11, PNM133LF12, PNM156LF11, PNM156LF12, PNMXXXLFXX 2.911(d)(5)(i) Equipment Type We, [Jiangsu Austin Optronics Technology Co.,LTD] certify that the equipment for which authorization is sought through certification is not:  Prohibited from receiving an equipment authorization pursuant to § 2.903; of the FCC rules.  Identified as an equipment type in the “Covered List” NOTE 1 Yours sincerely, Name: Lan Zhu Date:2023.02.24 Title and Company name: PM / Shen Zhen ZRONE Link Technology Co.,Ltd NOTE 1 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu Austin Optronics Technology Co.,LTD 2.911 (d)(5)(ii) Applicant Attestation v1.2 Section 2.911(d)(5)(ii) Certification – Applicant (Covered List ) Company name: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Product Name: pintura display unit FCC ID: 2A938-PNM101LF11 Model(s): PNM101LF11 , PNM101LF12, PNM133LF11 , PNM133LF12, PNM156LF11 , PNM156LF12, PNMXXXLFXX 2.911(d)(5)(ii) Applicant filing We, [Jiangsu Austin Optronics Technology Co.,LTD] certify that, as of the date of the filing of the application, the applicant is not identified NOTE 1 on the “Covered List” NOTE 2 , established pursuant to § 1.50002 of this chapter, as an entity producing covered communications equipment. Yours sincerely, Name: Lan Z hu Date: 2023.02.24 Title and Company name: Manager / Shenzhen Shiwinka Technology Company Limited NOTE 1 Delete option not applicable to this application. NOTE 2 “Covered List”; is the List of Equipment and Services Covered By Section 2 of The Secure Networks Act, available at https://www.fcc.gov/supplychain/coveredlist References; 1) 986446 D01 Covered Equipment v01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2) Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

Jiangsu Austin Optronics Technology Co.,LTD Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Series Models Description Date: 2023/02/24 Dear Sir/Madam, We, Jiangsu Austin Optronics Technology Co.,LTD Hereby declares the following statement for CE/FCC/MIC certificate, PCB board, Schematic, Hardware version, Software version, structure and internal photos are same except for the model’s name; named differently due to marketing purposes. Product name: pintura display unit Model no.: PNM101LF11, PNM101LF12, PNM133LF11, PNM133LF12, PNM156LF11, PNM156LF12, PNMXXXLFXX Signature: Name / Title: Lan Zhu / QS Company: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Phone: 15251733445 Fax: / E-Mail: [email protected]

Jiangsu Austin Optronics Technology Co.,LTD Agent Authorization Company: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Product Name: pintura display unit Trade Mark: N/A Model Number(s): PNM101LF11, PNM101LF12, PNM133LF11, PNM133LF12, PNM156LF11, PNM156LF12, PNMXXXLFXX FCC ID: 2A938-PNM101LF11 We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature: Date: 2023-02-24 Name: Lan Zhu Title: QS Company: Jiangsu Austin Optronics Technology Co.,LTD

Jiangsu Austin Optronics Technology Co.,LTD Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023-02-24 Subject; Request for Confidentiality FCC ID: 2A938-PNM101LF11 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description BOM Software Security Requirements In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name / Title: Lan Zhu / QS Company: Jiangsu Austin Optronics Technology Co.,LTD Address: Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Phone: 15251733445 Fax: / E-Mail: [email protected]

FCC ID: 2A938-PNM101LF11 Fig. 1 Fig. 2 FCC ID: 2A938-PNM101LF11 Fig. 3 Fig. 4 FCC ID: 2A938-PNM101LF11 Fig. 5 Fig. 6 FCC ID: 2A938-PNM101LF11 Fig. 7

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L7.08cm x 2.58cm) Label Location

FCC ID: 2A938-PNM101LF11 Fig. 1 Fig. 2 Antenna FCC ID: 2A938-PNM101LF11 Fig. 3 Fig. 4 FCC ID: 2A938-PNM101LF11 Fig. 5 Fig. 6 FCC ID: 2A938-PNM101LF11 Fig. 7 Fig. 8 Coil Antenna（RX）

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong RF Exposure evaluation Report Reference No...................... : FCC ID. ............................................ : GTS20221216007-1-3 2A938-PNM101LF11 Compiled by ( position+printed name+signature) . : File administrators Peter Xiao Supervised by ( position+printed name+signature) . : Test Engineer Jenny Zeng Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue .................................... : Feb. 01, 2023 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name ............................ : Jiangsu Austin Optronics Technology Co.,LTD Address ............................................ : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Test specification ........................... : Standard ........................................... : 47CFR §1.1310 Basis and purpose 47CFR §2.1091 Radiofrequency radiation exposure evaluation: mobile devices KDB447498 D01 General RF Exposure Guidance v06 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : pintura display unit Trade Mark ....................................... : N/A Manufacturer .................................... : Jiangsu Austin Optronics Technology Co.,LTD Model/Type reference ...................... : PNM101LF11 Listed Models .................................. : PNM101LF12, PNM133LF11, PNM133LF12, PNM156LF11, PNM156LF12, PNMXXXLFXX Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 5.0V Result ............................................... : PASS Report No.: GTS20221216007-1-3 Page 2 of 11 T E S T R E P O R T Test Report No. : GTS20221216007-1-3 Feb. 01, 2023 ______________________________________________________________________________________________ Date of issue Equipment under Test : pintura display unit Model /Type : PNM101LF11 Listed model : PNM101LF12, PNM133LF11, PNM133LF12, PNM156LF11, PNM156LF12, PNMXXXLFXX Applicant : Jiangsu Austin Optronics Technology Co.,LTD Address : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Manufacturer : Jiangsu Austin Optronics Technology Co.,LTD Address : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20221216007-1-3 Page 3 of 11 Contents 1. SUMMARY ................................................................................................................................................................. 4 1.1 EUT CONFIGURATION ........................................................................................................................................................ 4 1.2 PRODUCT DESCRIPTION ..................................................................................................................................................... 4 2. TEST ENVIRONMENT ................................................................................................................................................. 5 2.1 ADDRESS OF THE TEST LABORATORY ..................................................................................................................................... 5 2.2 TEST FACILITY .................................................................................................................................................................. 5 2.3 ENVIRONMENTAL CONDITIONS ............................................................................................................................................ 5 2.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY .................................................................................................................. 5 3. METHOD OF MEASUREMENT .................................................................................................................................... 6 3.1 APPLICABLE STANDARD ...................................................................................................................................................... 6 3.2 REQUIREMENT ................................................................................................................................................................. 6 3.3 LIMIT ............................................................................................................................................................................. 6 3.4 MPE CALCULATION METHOD ............................................................................................................................................. 7 3.5 ANTENNA INFORMATION ...................................................................................................…

Text truncated - open the document above for the full version.

TestReport Nameofthebuyer:JiangsuAustinOptoelectronicTechnologyCo.,Ltd Buyer'smaterialnumber: Suppliercompanyname:ShenzhenJiaZhichunTechnologyCo.,LTD Supplierproductmaterialnumber：PA20540-WIFI-04202-V1.1(JZC) Supplierproductdescription:built-inWIFIantenna Remarks： Signatureofthedemander： Thedemanderseal： Signatureofthesupplier： SealoftheSupplier： MAKE： YangKui DATE： 2022.9.22 ADDRESS 2ndfloor,Building12,NangangFirstIndustrialPark, SongbaiRoad,NanshanDistrict,Shenzhen PHONE0755-86265563 FAX0755-26913300 ProductmodelDateofproductionPagenumber PA205402022-9-222/7 MAKERExamineandverifyRatify YangKuiYangKuiYeXue 1.IntroductiontotheOTAtestsystem 1 、 PlacethesubjectDUTonthe3Dall-wavedarkchamberturntable. Theturntablerotatesat360degreestoenablea3Dcomprehensive measurementoftheDUT.ThetestantennaProbetransmitsthe measuredDUTsignaltotheintegratedsensorviatheRFcoaxial cable.Thecomprehensiveinstrumentthentransmitsthesignaltothe computerthroughtheGPIBcardforpost-processing,andobtainsthe finalRFtestdata. 2.Testindicators 2.1.TRP(TotalRadiatedPower):Thetotalradiationpowerreflects theperformanceoftheterminalemissionpart. 2.2 、 TIS(TotalIsotropicSensitivity):Overallreceivingsensitivity reflectstheperformanceoftheterminalreceivingpart. 3 、 Testingfacility Devicename Comprehensive measuring instrument Comprehensive measuring instrument Network analyzer Network analyzer Unittype CMW5008820CE5071B8753ES Equipment manufacturers Rohde&Schwarz AntitsuAgilentAgilent ProductmodelDateofproductionPagenumber PA205402022-9-223/7 MAKERExamineandverifyRatify YangKuiYangKuiYeXue 2 、 Productpicture 2.1.Theoverallappearance 2.2.Antennapictures ProductmodelDateof productionPagenumber PA205402022-9-224 / 7 MAKERExamineand verifyRatify YangKuiYangKuiYe Xue 3 、 Antennaspecifications 3.1 、 Physicalcharacteristics AntennaDimensions(mm)26.3* 18.2Cablelength(mm)350mm ConnectormodelGeneration1 IPEX(MHF①)Typeof CableRF1.13coaxis AntennamaterialFPCAntennacolourBlack Workingtemperature-40 °C~80°CWorkinghumidity10%~95% Storagetemperature-4 5°C~8 5°CStoragehumidity10%~95% 3.2 、 Electricalcharacter ； electricalspecification frequency（MHz）2400~2500Impedance50 Ω Gain （MAX） 2.0dBi VSWR≤2.0 PolarizationLinearpolarization 4 、 OTAtestdata Channel 3D ACTIVE TRP(dBm)TIS(dBm) 2.4G 802.11b/11M 1 10.34-78.68 6 10.42-80.21 11 10.29-81.46 ProductmodelDateofproductionPagenumber PA205402022-9-225/7 MAKERExamineandverifyRatify YangKuiYangKuiYeXue 5.3D/2DRadiationpattern ProductmodelDateofproductionPagenumber PA205402022-9-226/7 MAKERExamineandverifyRatify YangKuiYangKuiYeXue 6.Antennainstallationinstructions 6.1 、 FirsttheFPCandpastetheFPCinthestructureslot 6.2 、 PasteconductivefoamatthecopperleakageofFPC 6.3 、 Installthescreen,contacttheconductivefoamwiththescreen metalframe,andconnecttheantennawiththemetal FPCAlignthestructure slotpaste Paste conductive foam ProductmodelDateofproductionPagenumber PA205402022-9-227/7 MAKERExamineandverifyRatify YangKuiYangKuiYeXue Thanks ！

Case No. : GTS20221216007-1-2 Ambient Condition: 25 °C, 45 %RH, Atmos100.1Kpa, Test Date: 2023.1.13 Test Engineer: Jenny zeng Appendix C.1: DTS Bandwidth Test Result TestMode Antenna Frequency[MHz] DTS BW [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 9.080 2407.440 2416.520 0.5 PASS 2437 9.520 2432.440 2441.960 0.5 PASS 2462 9.520 2456.960 2466.480 0.5 PASS 11G Ant1 2412 15.480 2404.400 2419.880 0.5 PASS 2437 14.400 2429.720 2444.120 0.5 PASS 2462 15.720 2454.160 2469.880 0.5 PASS 11N20SISO Ant1 2412 13.880 2405.640 2419.520 0.5 PASS 2437 14.360 2430.080 2444.440 0.5 PASS 2462 16.280 2454.080 2470.360 0.5 PASS 11N40SISO Ant1 2422 35.120 2404.400 2439.520 0.5 PASS 2437 35.120 2419.400 2454.520 0.5 PASS 2452 35.120 2434.400 2469.520 0.5 PASS Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 Appendix C.2: Occupied Channel Bandwidth Test Result TestMode Antenna Channel Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict 11B Ant1 2412 12.442 2405.787 2418.229 --- --- 2437 12.504 2430.756 2443.260 --- --- 2462 12.431 2455.766 2468.197 --- --- 11G Ant1 2412 16.896 2403.582 2420.478 --- --- 2437 16.972 2428.477 2445.449 --- --- 2462 16.867 2453.522 2470.389 --- --- 11N20SISO Ant1 2412 17.760 2403.117 2420.877 --- --- 2437 17.827 2428.061 2445.888 --- --- 2462 17.772 2453.075 2470.847 --- --- 11N40SISO Ant1 2422 36.146 2404.001 2440.147 --- --- 2437 36.246 2418.876 2455.122 --- --- 2452 36.088 2433.976 2470.064 --- --- Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 Appendix C.3: Maximum conducted output power Test Result Peak TestMode Antenna Frequency[MH z] Peak Powert[dBm] Conducted Limit[dBm] Verdict 11B Ant1 2412 16.82 ≤30.00 PASS 2437 16.71 ≤30.00 PASS 2462 16.08 ≤30.00 PASS 11G Ant1 2412 21.73 ≤30.00 PASS 2437 20.10 ≤30.00 PASS 2462 20.19 ≤30.00 PASS 11N20SISO Ant1 2412 20.20 ≤30.00 PASS 2437 20.11 ≤30.00 PASS 2462 20.22 ≤30.00 PASS 11N40SISO Ant1 2422 19.14 ≤30.00 PASS 2437 21.64 ≤30.00 PASS 2452 19.28 ≤30.00 PASS Appendix C.4: Maximum power spectral density Test Result TestMode Antenna Frequency[MHz] Result[dBm/3-100kHz] Limit[dBm/3kHz] Verdict 11B Ant1 2412 -9.95 ≤8.00 PASS 2437 -8.04 ≤8.00 PASS 2462 -10.42 ≤8.00 PASS 11G Ant1 2412 -9.45 ≤8.00 PASS 2437 -11.75 ≤8.00 PASS 2462 -11.22 ≤8.00 PASS 11N20SISO Ant1 2412 -11.48 ≤8.00 PASS 2437 -11.89 ≤8.00 PASS 2462 -10.31 ≤8.00 PASS 11N40SISO Ant1 2422 -15.89 ≤8.00 PASS 2437 -13.89 ≤8.00 PASS 2452 -15.63 ≤8.00 PASS Test Graphs 11B_Ant1_2412 11B_Ant1_2437 11B_Ant1_2462 11G_Ant1_2412 11G_Ant1_2437 11G_Ant1_2462 11N20SISO_Ant1_2412 11N20SISO_Ant1_2437 11N20SISO_Ant1_2462 11N40SISO_Ant1_2422 11N40SISO_Ant1_2437 11N40SISO_Ant1_2452 Appendix C.5: Band edge measurements Test Result TestMode Antenna ChName Frequency[MHz] RefLevel[dBm] Result[dBm] Limit[dBm] Verdict 11B Ant1 Low 2412 5.30 -39.78 ≤-14.7 PASS High 2462 4.31 -48.86 ≤-15.7 PASS 11G Ant1 Low 2412 4.82 -25.8 ≤-15.18 PASS High 2462 3.45 -41.28 ≤-16.55 PASS 11N20SISO Ant1 Low 2412 1.80 -28.87 ≤-18.2 PASS High 2462 3.14 -41.17 ≤-16.86 PASS 11N40SISO Ant1 Low 2422 -1.34 -33.93 ≤-21.34 PASS High 2452 -0.98 -34.53 ≤-20.98 PASS Test Graphs 11B_Ant1_Low_2412 11B_Ant1_High_2462 11G_Ant1_Low_2412 11G_Ant1_High_2462 11N20SISO_Ant1_Low_2412 11N20SISO_Ant1_High_2462 11N40SISO_Ant1_Low_2422 11N40SISO_Ant1_High_2452 Appendix C.6: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [Mhz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict 11B Ant1 2412 Reference 3.61 3.61 --- PASS 30~1000 3.61 -60.39 ≤-16.39 PASS 1000~26500 3.61 -47.64 ≤-16.39 PASS 2437 Reference 2.94 2.94 --- PASS 30~1000 2.94 -60.28 ≤-17.06 PASS 1000~26500 2.94 -46.96 ≤-17.06 PASS 2462 Reference 3.45 3.45 --- PASS 30~1000 3.45 -59.76 ≤-16.55 PASS 1000~26500 3.45 -38 ≤-16.55 PASS 11G Ant1 2412 Reference 0.89 0.89 --- PASS 30~1000 0.89 -59.4 ≤-19.11 PASS 1000~26500 0.89 -41.68 ≤-19.11 PASS 2437 Reference 1.41 1.41 --- PASS 30~1000 1.41 -60.8 ≤-18.59 PASS 1000~26500 1.41 -43.56 ≤-18.59 PASS 2462 Reference -0.43 -0.43 --- PASS 30~1000 -0.43 -60.56 ≤-20.43 PASS 1000~26500 -0.43 -47.78 ≤-20.43 PASS 11N20SISO Ant1 2412 Reference 0.97 0.97 --- PASS 30~1000 0.97 -59.92 ≤-19.03 PASS 1000~26500 0.97 -39.18 ≤-19.03 PASS 2437 Reference -0.57 -0.57 --- PASS 30~1000 -0.57 -59.54 ≤-20.57 PASS 1000~26500 -0.57 -44.69 ≤-20.57 PASS 2462 Reference -0.90 -0.90 --- PASS 30~1000 -0.90 -60.13 ≤-20.9 PASS 1000~26500 -0.90 -45.07 ≤-20.9 PASS 11N40SISO Ant1 2422 Reference -1.91 -1.91 --- PASS 30~1000 -1.91 -59.4 ≤-21.91 PASS 1000~26500 -1.91 -37.48 ≤-21.91 PASS 2437 Reference 0.15 0.15 --- PASS 30~1000 0.15 -60.33 ≤-19.85 PASS 1000~26500 0.15 -47.82 ≤-19.85 PASS 2452 Reference -1.43 -1.43 --- PASS 30~1000 -1.43 -59.86 ≤-21.43 PASS 1000~26500 -1.43 -47.6 ≤-21.43 PASS Test Graphs 11B_Ant1_2412_0~Reference 11B_Ant1_2412_30~1000 11B_Ant1_2412_1000~26500 11B_Ant1_2437_0~Reference 11B_Ant1_2437_30~1000 11B_Ant1_2437_1000~26500 11B_Ant1_2462_0~Reference 11B_Ant1_2462_30~1000 11B_Ant1_2462_1000~26500 11G_Ant1_2412_0~Reference 11G_Ant1_2412_30~1000 11G_Ant1_2412_1000~26500 11G_Ant1_2437_0~Reference 11G_Ant1_2437_30~1000 11G_Ant1_2437_1000~26500 11G_Ant1_2462_0~Reference 11G_Ant1_2462_30~1000 11G_Ant1_2462_1000~26500 11N20SISO_Ant1_2412_0~Reference 11N20SISO_Ant1_2412_30~1000 11N20SISO_Ant1_2412_1000~26500 11N20SISO_Ant1_2437_0~Reference 11N20SISO_Ant1_2437_30~1000 11N20SISO_Ant1_2437_1000~26500 11N20SISO_Ant1_2462_0~Reference 11N20SISO_Ant1_2462_30~1000 11N20SISO_Ant1_2462_1000~26500 11N40SISO_Ant1_2422_0~Reference 11N40SISO_Ant1_2422_30~1000 11N40SISO_Ant1_2422_1000~26500 11N40SISO_Ant1_2437_0~Reference 11N40SISO_Ant1_2437_30~1000 11N40SISO_Ant1_2437_1000~26500 11N40SISO_Ant1_2452_0~Reference 11N40SISO_…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. .....................: FCC ID. ............................................ : GTS20221216007-1-2 2A938-PNM101LF11 Compiled by ( position+printed name+signature) .. : File administrators Peter Xiao Supervised by ( position+printed name+signature) .. : Test Engineer Jenny Zeng Approved by ( position+printed name+signature) .. : Manager Jason Hu Date of issue ..................................... : Feb. 01, 2023 Representative Laboratory Name .: Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong,China Applicant’s name ............................ : Jiangsu Austin Optronics Technology Co.,LTD Address ............................................ : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Test specification ...........................: Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description .....................: pintura display unit Trade Mark ....................................... : N/A Manufacturer .................................... : Jiangsu Austin Optronics Technology Co.,LTD Model/Type reference....................... : PNM101LF11 Listed Models .................................. : PNM101LF12, PNM133LF11, PNM133LF12, PNM156LF11, PNM156LF12, PNMXXXLFXX Operation Frequency ........................ : From 2412MHz to 2462MHz Hardware Version ............................ : N/A Software Version .............................. : N/A Rating ............................................... : DC 5.0V Result................................................ : PASS Report No.: GTS20221216007-1-2 Page 2 of 37 T E S T R E P O R T Test Report No. : GTS20221216007-1-2 Feb. 01, 2023 ____________________________________________________________________________________ Date of issue Equipment under Test : pintura display unit Model /Type : PNM101LF11 Listed model : PNM101LF12, PNM133LF11, PNM133LF12, PNM156LF11, PNM156LF12, PNMXXXLFXX Applicant : Jiangsu Austin Optronics Technology Co.,LTD Address : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Manufacturer : Jiangsu Austin Optronics Technology Co.,LTD Address : Building 02,1 KeChuang Road, Qixia District, Nanjing City, Jiangsu, P.R.China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20221216007-1-2 Page 3 of 37 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup ................................................................................................................. 6 2.7. Related Submittal(s) / Grant (s) ............................................................................................................. 7 2.8. EUT Exercise Software .......................................................................................................................... 7 2.9. Special Accessories ............................................................................................................................... 7 2.10. External I/O Cable ................................................................................................................................ 7 2.11. Modifications ........................................................................................................................................ 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1. Address of the test laboratory ................................................................................................................ 8 3.2. Test Facility ..........................…

Text truncated - open the document above for the full version.

FCC ID: 2A938-PNM101LF11 _______________________________________________________________________________________________ Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissi…

Text truncated - open the document above for the full version.