2A94QNB-TF014CEILING LAMP

CEILING LAMP NB-TF014 User Manual SAFETY INSTRUCTIONS 1. Prior to installation and maintenance of the lamps, please carefully review the assembly instructions. Keep these instructions safe for future reference. 2. The power supply used should not exceed the rated voltage (AC100-240V, 50/60HZ) for prolonged periods as it may cause overheating and damage to the lamp. 3. Before use, ensure that the cable and switch are in good condition and the local voltage aligns with the lamp's voltage requirement. 4. Always turn off the power before installing the lamp. 5. Avoid installing the lamp near high-temperature objects, such as stoves, gas burners, exhaust cylinders, etc., as these can damage the lamp. 6. Please refrain from modifying the lamps as it may lead to malfunction. 7. Regular cleaning and inspection are necessary. Ensure the power is off before cleaning. Use a dry cloth to clean the surface and avoid using acidic or alkaline chemical solvents, which can cause severe damage to the surface. Specifications Operate Voltage LED Output Power Motor Rated Power Wind Speed Remote Distance AC 100-240V 25-36W 25W 1-6 Levels 8-20 meters MOUNTING THE BRACKETMOUNTING THE LAMP REMOTE CONTROLLER Concrete ceiling Wood ceiling Remote Control Matching Code When powered on, press and hold the light switch button for a while (within 5s) to turn the light on, when you hear a beep or a light flashes, the code match is successful. lf you need to match the code a second time, wait for 30 seconds, power on, and repeat the above operation. Junction box 3 4 I 2 Fig.1Fig.2 Fig.3 Step 1: Start by disassembling the lamp's hanging plate. Use this as a template to measure and locate the hole positions on the ceiling. Drill holes at the marked locations and use mesons to secure the hanging plate. If your ceiling is wooden rather than concrete, you can directly use self-tapping screws to fasten the cross-hanging panels. Step 2: Attach the fan light's safety buckle to the wire rope ring of the cross-hanging plate. Step 3: Connect the lamp wire to the power cable, starting with the ground wire, followed by the neutral and live wires. Check if the main line of the lamp body is working normally by connecting it to a 110V power supply. It's recommended that a professional electrician perform the lamp installation. Step 4: Install the lamp hub on the hanging plate, aligning with the pre-drilled holes. Please ensure that the lamp body and ceiling are securely connected. (1) For a concrete ceiling: Drill two holes of appropriate depth using an 8mm drill bit. Insert two expansion screws into these holes. Next, fix the hanger bracket to the expansion screws using wood screws and secure it by tightening the nuts of the expansion screws. (See Fig.2) (2) For a wood ceiling: Fix the mounting bracket directly to the wood ceiling (with a minimum thickness of 7cm) using four wood screws. (See Fig.3) Warning Sign: If the remote controller is not functioning effectively, please check the battery. If the remote is not in use for a long period, it's recommended to remove the battery. ON/OFF Wind Deflector Positive & Negative Fan Speed 1-6 Brightness + Brightness - Timer (1H) Timer (2H) Segmented Light Switch & Code Matching (Hold the button to turn on the light) Stop Button Color Temp + Color Temp - CAUTION! The electronic switch is not an isolated product and needs to be operated by professional personnel during installation. The electronic switch is triggered by the remote control, and the wireless frequency of the remote control transmitter is 2.4GHz. 1. Power on the device. 2. Within 5 seconds after powering on the device, press the " " button on the device. 3. Observe if the device flashes or beeps. If the device flashes or beeps, it indicates successful pairing between the device and your phone. 4. If not, please try the above steps again. 5. Now, control the device through the application on your phone. Menu Button Descriptions APP CONTROL CLEANING AND MAINTENANCE Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories should not be disposed of with other household waste at the end of their working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from other types of waste and recycle them responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take these items for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product and its electronic accessories should not be mixed with other commercial wastes for disposal. WEEE Compliance Manufacturer: Shenzhen Aspiron Technology Company Limited Address: 3rd Floor, Yiben Building, No.1063 Chaguang Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China [email protected] Made in China FCC STATEMENT: Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference t…

Text truncated - open the document above for the full version.

ShenzhenAspironTechnologyCompanyLimited 3rd Floor,YibenBuilding,No.1063ChaguangRoad,Xili Street,NanshanDistrict,Shenzhen,Guangdong, China FederalCommunicationsCommission Authorizationand EvaluationDivision 7435OaklandMillsRoad Columbia,MD 21046 USA Date:Apr. 03, 2024 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A94QNB-TF014 FRN: 0033347360 [ShenzhenAspironTechnologyCompanyLimited] (“the applicant”) certifiesthat the equipmentfor whichauthorizationis soughtis not“covered” equipmentprohibitedfromreceivingan equipment authorizationpursuantto section2.903of the FCC rules. Sincerely, (Applicantsignature) (BobbyZou)

ShenzhenAspironTechnologyCompanyLimited 3rd Floor,YibenBuilding,No.1063ChaguangRoad,Xili Street,NanshanDistrict,Shenzhen,Guangdong, China FederalCommunicationsCommission Authorizationand EvaluationDivision 7435OaklandMillsRoad Columbia,MD 21046 USA Date:Apr. 03, 2024 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A94QNB-TF014 FRN: 0033347360 [ShenzhenAspironTechnologyCompanyLimited] (“the applicant”) certifiesthat,as of the dateof the filingof the application,the applicantis notidentifiedon the CoveredList as an entityproducing “covered” equipment. Sincerely, (Applicantsignature) (BobbyZou)

ShenzhenAspironTechnologyCompanyLimited 3rdFloor,YibenBuilding,No.1063ChaguangRoad,XiliStreet,NanshanDistrict,Shenzhen,Guangdong,China FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:02-01-2024 Ref:2.911(d)(7)USADesignatedAgentforServiceofProcess FCCID:2A94QNB-TF014 FRN:0033347360 ShenzhenAspironTechnologyCompanyLimited.(“theapplicant”)certifiesthat,asofthedateofthe filingoftheapplication,VAVAINTERNATIONALINC.isourdesignatedU.S.agentforserviceofprocess fortheabovereferencedFCCID.GuangzhouYoushengAutomobileTechnologyCo.,Ltd.acceptsto maintainanagentfornolessthanoneyearafterthegranteehasterminatedallmarketingand importationortheconclusionofanyCommission-relatedproceedinginvolvingtheequipment. VAVAINTERNATIONALINC.accepts,asofthedateofthefilingoftheapplication,theobligationofthe designatedU.S.agentforserviceofprocessfortheabovereferencedFCCID. DesignatedU.S.AgentInformation: Name:VAVAINTERNATIONALINC. Address:20370TownCenterLaneSuite208Cupertino,CA95014,UnitedStates FRN:0033406802 ContactPerson:NingLiang Tel.:510-767-8112 Email:[email protected] Sincerely, [Applicantname]ShenzhenAspironTechnologyCompanyLimited. (Applicantprintedname)Bobby.zou (Applicantsignature) (U.S.agentsignature)

ShenzhenAspironTechnologyCompanyLimited 3rd Floor, Yiben Building,No.1063ChaguangRoad,Xili Street,NanshanDistrict,Shenzhen,Guangdong,China Office of EngineeringTechnology FederalCommunicationsCommission 7435 OaklandMills Road Columbia,MD 21046 USA Date: Apr. 03, 2024 Subject;Requestfor Confidentiality FCC ID: 2A94QNB-TF014 To WhomIt May Concern, Pursuantto the provisionsof the Commission’s rules Title 47 Sections§0.457 and §0.459,we are requestingthe Commissionto withholdthe followingattachment(s)as confidential documentsfrom public disclosureindefinitely. Thesedocumentscontaindetailedsystemand equipmentdescriptionsand are consideredas proprietaryinformationin operationof the equipment.The public disclosureof these documents might be harmfulto our companyand would give competitorsan unfair advantagein the market. SchematicDiagram Block Diagram OperationalDescription Parts List In additionalto abovementioneddocuments,in order to complywith the marketingregulations in Title 47 CFR §2.803 and the importationrules in Title 47 CFR §2.1204,while ensuringthat businesssensitiveinformationremainsconfidentialuntil the actualmarketingof newly authorizeddevices,we requestShort Term Confidentialityof the followingattachment(s); ExternalPhotos Test Setup Photos InternalPhotos User Manual For 45 days, pursuantto PublicNoticeDA 04-1705. OR For 180 days pursuantto KDB 726920D01. It is our understandingthat all measurementtest reports,FCC ID label formatand correspondenceduringthe certificationreviewprocesscannotbe grantedas confidential documentsand this informationwill be availablefor public reviewonce the grant of equipment authorizationis issued. Sincerely, Signature: Name: BobbyZou Title:ApprobationManager

Shenzhen Aspiron Technology Company Limited 3rd Floor, Yiben Building, No.1063 Chaguang Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China Jul. 11, 2024 Eurofins Electrical and Electronic Testing NA, Inc. 914 West Patapsco Avenue Baltimore, MD 21230 RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern: We, the undersigned, hereby authorize (Attestation of Global Compliance (Shenzhen) Co., Ltd) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Name: Bobby Zou Title: Approbation Manager

Report No.: AGC15942240122AP02 Page 1 of 4 EXTERNAL PHOTOS All VIEW OF EUT TOP VIEW OF EUT Report No.: AGC15942240122AP02 Page 2 of 4 BOTTOM VIEW OF EUT FRONT VIEW OF EUT Report No.: AGC15942240122AP02 Page 3 of 4 BACK VIEW OF EUT LEFT VIEW OF EUT Report No.: AGC15942240122AP02 Page 4 of 4 RIGHT VIEW OF EUT ****************************************End of Report*************************************

FCC ID Label Location 50mm*15mm FCC ID: 2A94QNB-TF014 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired

Report No.: AGC15942240122AP02 Page 1 of 6 INTERNAL PHOTOS OPEN VIEW OF EUT (FIGURE 1) OPEN VIEW OF EUT (FIGURE 2) Report No.: AGC15942240122AP02 Page 2 of 6 OPEN VIEW OF EUT (FIGURE 3) INTERNAL VIEW OF EUT (FIGURE 1) Report No.: AGC15942240122AP02 Page 3 of 6 INTERNAL VIEW OF EUT (FIGURE 2) INTERNAL VIEW OF EUT (FIGURE 3) Report No.: AGC15942240122AP02 Page 4 of 6 INTERNAL VIEW OF EUT (FIGURE 4) INTERNAL VIEW OF EUT (FIGURE 5) 2.4G TX&BT Antenna Report No.: AGC15942240122AP02 Page 5 of 6 INTERNAL VIEW OF EUT (FIGURE 6) INTERNAL VIEW OF EUT (FIGURE 7) Report No.: AGC15942240122AP02 Page 6 of 6 INTERNAL VIEW OF EUT (FIGURE 8) INTERNAL VIEW OF EUT (FIGURE 9) ****************************************End of Report*************************************

Page 1 of 10 RF Exposure Report Report No.: AGC15942240122FH01 FCC ID : 2A94QNB-TF014 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : CEILING LAMP BRAND NAME : N/A MODEL NAME : NB-TF014 APPLICANT : Shenzhen Aspiron Technology Company Limited DATE OF ISSUE : Jul. 18, 2024 STANDARD(S) : FCC Part 2 Subpart J §2.1091 REPORT VERSION : V1.0 Attestation of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15942240122FH01 Page 2 of 10 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 18, 2024 Valid Initial Release Report No.: AGC15942240122FH01 Page 3 of 10 Table of Contents 1. General Information ........................................................................................................................................ 4 2. Product Information ........................................................................................................................................ 5 2.1 Product Technical Description ................................................................................................................... 5 3. Test Environment ............................................................................................................................................ 6 3.1 Address Of The Test Laboratory ............................................................................................................... 6 3.2 Test Facility ................................................................................................................................................ 6 3.3 Environmental Conditions ......................................................................................................................... 7 4. Portable Device Evaluation Method and Limit ............................................................................................. 8 5. Mobile Device Evaluation Method and Limit ................................................................................................ 9 6. Measurement Results ................................................................................................................................... 10 7. Measurement Evaluation .............................................................................................................................. 10 Report No.: AGC15942240122FH01 Page 4 of 10 1. General Information Applicant Shenzhen Aspiron Technology Company Limited Address 3rd Floor, Yiben Building, No. 1063 Chaguang Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China Manufacturer Shenzhen Aspiron Technology Company Limited Address 3rd Floor, Yiben Building, No. 1063 Chaguang Road, Xili Street, Nanshan District, Shenzhen, Guangdong, China Factory Zhongshan Liangerton lighting Co., LTD Address 10 Kanglin Street, Guzhen Town, Zhongshan City, Guangdong Province Product Designation CEILING LAMP Brand Name N/A Test Model NB-TF014 Series Model(s) N/A Difference Description N/A Date of receipt of test item Jan. 30, 2024 Date of Test Jan. 30, 2024 to Jul. 18, 2024 Deviation from Standard No any deviation from the test method Condition of Test Sample Normal Test Result Pass Test Report Form No AGCER-FCC-RF Exposure-V1 Note: The test results of this report relate only to the tested sample identified in this report. Prepared By Alan Duan (Project Engineer) Jul. 18, 2024 Reviewed By Calvin Liu (Reviewer) Jul. 18, 2024 Approved By Max Zhang (Authorized Officer) Jul. 18, 2024 Report No.: AGC15942240122FH01 Page 5 of 10 2. Product Information 2.1 Product Technical Description Frequency Band (Operating) WLAN: 2.412GHz ~ 2.462GHz WLAN: 5.18GHz ~ 5.32GHz / 5.50GHz ~ 5.70GHz WLAN: 5.745GHz ~ 5825GHz Bluetooth: 2.402GHz ~ 2.480GHz Other: 2.4G: 2.402GHz ~ 2.4800GHz Hardware Version V1.0 Software Version V-0 Modulation Type GFSK Device Category Portable (<20cm separation) Mobile (>20cm separation) Others: Antenna Diversity Single antenna Multiple antennas Tx diversity Rx diversity Tx/Rx diversity Antenna Designation Internal Antenna Antenna Gain 1.5 dBi Minimum Assessment Distance 20cm Evaluation Applied MPE Evaluation SAR Evaluation Report No.: AGC15942240122FH01 Page 6 of 10 3. Test Environment 3.1 Address Of The Test Laboratory Laboratory: Attestation of Global Compliance (Shenzhen) Co., Ltd. Address: 1-2/F, Building 19, Junfeng Industrial Park, Chongqing Road, Heping Community, Fuhai Street, Bao'an District, Shenzhen, Guangdong, China 3.2 Test Facility The test facility is recognized, certified, or accredited by the following organizations: CNAS-Lab Code: L5488 Attestation of Global Compliance (Shenzhen) Co., Ltd. has been assessed and proved to follow CNAS-CL01 Accreditation Criteria for Testing and Calibration Laboratories (identical to ISO/IEC17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories.) A2LA-Lab Cert. No.: 5054.02 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been accredited by A2LA for technical competence in the field of electrical testing, and proved to follow ISO/IEC 17025: 2017 General Requirements for the Competence of Testing and Calibration Laboratories and any additional program requirements in the identified field of testing. FCC-Registration No.: 975832 Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the FCC (Federal Communications Commission). The acceptance letter from the FCC is maintained in our files with Registration 975832. IC-Registration No.: 24842(CAB identifier: CN0063) Attestation of Global Compliance (Shenzhen) Co., Ltd. EMC Laboratory has been registered and fully described in a report filed with the Certification and Engineering Bureau of Industry Canada. The acceptance letter from the IC is maintained in our files with Registration 24842. Report No.: AGC15942240122FH01 Page 7 of 10 3.3 Environmental Conditions Normal Conditions Temperature range (°C) 15 …

Text truncated - open the document above for the full version.

Antenna Describe 1 An tenna Describe Antenna Antenna Gai Internal Antenna n Frequency Rang 1.5dBi e Connector Typ 2.4Ghz-2.5Ghz e Direct Location of mearement(company name) SHENZHENSHIXINZHONGXIN TECHNOLOGY.CO.,LTD 2ExternalViewDrawing Pictureofantenna 120mm long,22 wire single 2P electron wire. UL1007-20# White wire bend 10MM (outer heat shrink tube 16MM). One end leaks 2mm tin 3MeasurementResult 3.1ReturnLoss(S11) 3.2SmithChart 3.3Gain

Page 1 of 52 FCC Test Report Report No.: AGC15942240122FR02 FCC ID : 2A94QNB-TF014 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : CEILING LAMP BRAND NAME : N/A MODEL NAME : NB-TF014 APPLICANT : Shenzhen Aspiron Technology Company Limited DATE OF ISSUE : Jul. 18, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15942240122FR02 Page 2 of 52 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 18, 2024 Valid Initial Release Report No.: AGC15942240122FR02 Page 3 of 52 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Special Accessories ..................................................................................................................................... 7 2.6 Equipment Modifications ............................................................................................................................. 7 2.7 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Result ................................................................................................................................. 17 Report No.: AGC15942240122FR02 Page 4 of 52 8. 6dB Bandwidth Measurement ...................................................................................................................... 20 8.1 Provisions Applicable ................................................................................................................................. 20 8.2 Measurement Procedure ........................................................................................................................... 20 8.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 20 8.4 Measurement Results ................................................................................................................................ 21 9. Power Spectral Density Measurement ........................................................................................................ 25 9.1 Provisions Applicable ...............................…

Text truncated - open the document above for the full version.

Page 1 of 52 FCC Test Report Report No.: AGC15942240122FR01 FCC ID : 2A94QNB-TF014 APPLICATION PURPOSE : Original Equipment PRODUCT DESIGNATION : CEILING LAMP BRAND NAME : N/A MODEL NAME : NB-TF014 APPLICANT : Shenzhen Aspiron Technology Company Limited DATE OF ISSUE : Jul. 18, 2024 STANDARD(S) : FCC Part 15 Subpart C §15.247 REPORT VERSION : V1.0 Attestation Of Global Compliance (Shenzhen) Co., Ltd Report No.: AGC15942240122FR01 Page 2 of 52 Report Revise Record Report Version Revise Time Issued Date Valid Version Notes V1.0 / Jul. 18, 2024 Valid Initial Release Report No.: AGC15942240122FR01 Page 3 of 52 Table of Contents 1. General Information ........................................................................................................................................ 5 2. Product Information ........................................................................................................................................ 6 2.1 Product Technical Description ..................................................................................................................... 6 2.2 Test Frequency List ..................................................................................................................................... 6 2.3 Related Submittal(S) / Grant (S) ................................................................................................................. 7 2.4 Test Methodology......................................................................................................................................... 7 2.5 Special Accessories ..................................................................................................................................... 7 2.6 Equipment Modifications ............................................................................................................................. 7 2.7 Antenna Requirement .................................................................................................................................. 7 3. Test Environment ............................................................................................................................................ 8 3.1 Address of the Test Laboratory .................................................................................................................... 8 3.2 Test Facility .................................................................................................................................................. 8 3.3 Environmental Conditions ........................................................................................................................... 9 3.4 Measurement Uncertainty ........................................................................................................................... 9 3.5 List of Equipment Use ............................................................................................................................... 10 4.System Test Configuration ............................................................................................................................ 12 4.1 EUT Configuration ..................................................................................................................................... 12 4.2 EUT Exercise ............................................................................................................................................. 12 4.3 Configuration of Tested System ................................................................................................................ 12 4.4 Equipment Used In Tested System ........................................................................................................... 12 4.5 Summary of Test Results ........................................................................................................................... 13 5. Description of Test Modes ........................................................................................................................... 14 6. Duty Cycle Measurement ............................................................................................................................. 15 7. RF Output Power Measurement .................................................................................................................. 16 7.1 Provisions Applicable ................................................................................................................................. 16 7.2 Measurement Procedure ........................................................................................................................... 16 7.3 Measurement Setup (Block Diagram of Configuration) ............................................................................ 16 7.4 Measurement Result .......................................................................................…

Text truncated - open the document above for the full version.