2A9CD-TWSWireless headset

Wireless Headset user manual Packing list Bluetooth headset host Endurance charging box Micro 5pin charging cable User manual Earplug silicone cap Product specification Product model: TWS Bluetooth version: Bluetooth V5.3 Battery specification: earphone 3.7v 40mAh; Charging bin 3.7v 40mAh Supported mode: HFP/HSP/ A2DP/AVRCP Sensitivity: 105dB ±3dB S.P.L at 1KHz Signal distance: 10 m (in an ideal environment without any large obstacles) Playing time: about 2.5 hours Talk time: approximately 3 hours Standby time: about 80 hours Charging time: charge the charging warehouse for about 1.5 hours, and charge the headset for about 1 hour Charging times for the headset: about 2.5 times Functional instructions 1.Boot Take the headset out of the charging bin and start it automatically or long press the left and right multi-function button of the headset for 3 seconds. 2. Shut down Put the headset into the charging bin and turn off automatically. 3. Boot back When the pairing is successful, the bluetooth headset will first enter the state of reconnect when the second time is started and automatically reconnect the connected phone. 4. Play/pause In standby state, click the left or right earphone multifunction button to play music directly, while click the left or right earphone multifunction button to pause playing. 5. Switch songs Press the left earphone muti_function button for 2 seconds to play music, and then press the right earphone muti_function button for 2 seconds to play music. 6. Volume up and down Double-click the left earphone multifunction button to increase the volume step by step, and double-click the right earphone multifunction button to decrease the volume step by step 7. Answer incoming calls When the mobile phone calls, click the left or right earphone multifunction button can answer the phone. 8. Call hang up When talking on the mobile phone, you can hang up the phone by clicking the left or right earphone multifunction button. 9. Call relection When the phone calls, long press the left and right earphone multifunction button for 2 seconds to reject the call. 1. Redial When you are on standby or playing music, you can make the last call in your phone record by three clicks of the left earphone multifunction button. 11. Start voice assistant Three clicks on the right earphone multifunction button can activate apple's Siri or Google voice assistant for voice control of the phone operation. 12. Low battery alert When the battery of bluetooth headset is low, play the warning sound of low battery at an interval of 30 seconds until the headset is low battery and turns off. pairing method 1. Take out from the charging warehouse or press the left and right earphone multifunction button for 3 seconds to start up the headset until the red and blue lights flicker alternately, enter the state of search and pairing for the ear, enter the state of automatic pairing for the ear. After the pairing is successful, the red and blue lights of the main ear (right ear) continue to flicker alternately, while the blue lights of the secondary ear slowly flash, and play the prompt sound of successful pairing for the ear. 2. Start the bluetooth function of mobile phone or other devices. If it is an android phone or device, please click the "search bluetooth device" option. When the model of the bluetooth headset is found, click to enter pairing; After the pairing is successful, the main (right) ear will send out a signal that the connection is successful, and the indicator lights of the left and right earphones will turn to blue light and enter the standby state of connection. After the pairing is successful, the main ear will be the right channel, and the secondary ear will be the left channel. 3. The two earphones can also be paired with the mobile phone independently. The operation method can be operated according to the operation method in step 2 above. Charging operation 1. Plug one end of the Micro USB charging cable into the USB port of the charging warehouse and plug one end of the charger to charge the charging warehouse. The LCD will display the latest power. 2. Charge the earphone: put the earphone into the charging bin to charge it automatically. The earphone indicator is red when charging, and it will be off after being fully charged. The LCD of the charging cabin will display the remaining power. When the headset is fully charged, the LCD of the charging cabin will go out. Precautions 1. Please charge in a safe environment. When charging the charging warehouse, please separate the charging warehouse from the USB charging cable as soon as possible after the charging indicator is off, so as to avoid damage to the charging warehouse caused by the long time of charging. 2. When the music is playing, please adjust the music to the appropriate volume to avoid long-term damage to the hearing under the condition of high volume. 3. Try to avoid using the earphone where there is interference source, otherwise it may affect the earphone signal. 4. Try to avoid using the earphone in a corrosive environment, so as not to affect the function of the earphone. Tips: when you use this bluetooth headset to listen to music or talk, please pay attention to adjust the volume, so as not to affect your listening too much! FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip…

Text truncated - open the document above for the full version.

Shenzhen Senyang Zhiyuan Technology Co., Ltd Add: 505, Floor 5, West Block, Building 405, Sanda Industrial Zone, Futian District, Shenzhen. China. Date: 2022-11-17 FCC ID: 2A9CD-TWS Dear Sir/Madam, We, Shen动enSenyang Zlziyuan Technol。即Co., Ltd Hereby declares the following statement for Federal Communications Commission, PCB board, cireuit, structure and internal of these model(s) are the same, the only difference is that appearance and packaging. is different for these model: Product name: Wireless headset Model no.: TWS, TWS, H6, H01, H02, H03, H04, H05, H06, H07, HOB, H09, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H40, H41, H42, H43, H44, H45, H46, H47, H48, H49, H50, H51, H52, H53, H54, H55, H56, H57, H58, H59, H60, H61, H62, H63, H64, H65, H66, H67, H68, H69, H70, H71, H72, H73, H74, H75, H76, H77, H78, H79, HBO, H81, H82, H83, H84, H85, H86, H87, H88, H89, H90, H91, H92, H93, H94, H95, H96, H97, H98, H99, Y60, Y70, YBO, Y90, Y100, PR06, PR060, PR070, PR080, PR090, PR0100, A6S, E6S, E10, AIR1, AIR2, AIR3 Si八cere{从 Name/Title : Company: Address: Phone: E-Mail: 仇 仇 心m从 Dandan hu/ Sh 匹如S气气Zhiyua 八 Tee如ologyCo., Ltd sos, Floor-s, West Block, Bui/di八9 40S, S如da I八dustr-ia/ Zo 八e, Futi如District,Shevi.zhe 八 .Chi八a. 工34:1,.07q:1,.23� 红22S8S:[email protected]\ =

FCC ID: 2A9CD-TWS TB-RF-074-1.0 Appendix II EUT External Photographs Photo 1 Appearance of EUT Photo 2 Appearance of EUT FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 3 Appearance of EUT Photo 4 Appearance of EUT FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 5 Appearance of EUT Photo 6 Appearance of EUT FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 7 Appearance of EUT Photo 8 Appearance of EUT FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 9 Appearance of EUT Photo 10 Appearance of EUT EUT FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 11 Appearance of EUT Photo 12 Appearance of EUT FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 13 Appearance of EUT Photo 14 Appearance of EUT FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 15 Appearance of EUT Photo 16 Appearance of EUT

FCC ID: 2A9CD-TWS TB-RF-074-1.0 Appendix IFCC ID Label Size for the label: 5mm X 5mm FCC ID:2A9CD-TWS

FCC ID: 2A9CD-TWS TB-RF-074-1.0 Appendix III EUT Internal Photographs Photo 17 Internal of EUT Photo 18 Appearance of PCB& Battery FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo 19 Appearance of PCB& Battery BT ANT.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-1 Page: 1 of 3 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 RF Exposure Evaluation FCC ID:2A9CD-TWS 1. Client Information Applicant : Shenzhen Senyang Zhiyuan Technology Co., Ltd Address : 505, Floor 5, West Block, Building 405, Sanda Industrial Zone, Futian District, Shenzhen.China. Manufacturer : Shenzhen Senyang Zhiyuan Technology Co., Ltd Address : No. 18, Lane 18, Beiyuan, Mei2, Huicheng Town, Huilai County, Jieyang City, Guangdong Province.China. 2. General Description of EUT EUT Name : Wireless headset Model(s) No. : TWS, H6, H01, H02, H03, H04, H05, H06, H07, H08, H09, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23, H24, H25, H26, H27, H28, H29, H30, H31, H32, H33, H34, H35, H36, H37, H38, H39, H40, H41, H42, H43, H44, H45, H46, H47, H48, H49, H50, H51, H52, H53, H54, H55, H56, H57, H58, H59, H60, H61, H62, H63, H64, H65, H66, H67, H68, H69, H70, H71, H72, H73, H74, H75, H76, H77, H78, H79, H80, H81, H82, H83, H84, H85, H86, H87, H88, H89, H90, H91, H92, H93, H94, H95, H96, H97, H98, H99, Y60, Y70, Y80, Y90, Y100, PRO6, PRO60, PRO70, PRO80, PRO90, PRO100, A6S, E6S, E10, AIR1, AIR2, AIR3 Model Difference : All PCB boards and circuit diagrams are the same, the only difference is that appearance and packaging. Product Description : Operation Frequency: Bluetooth 5.3(BDR+EDR): 2402MHz~2480MHz RF Output Power: BT: 1.786dBm Antenna Gain: -8.46dBi PCB Antenna Power Supply (Earphone) : DC 3.7V by 30mAh Rechargeable Li-ion battery Power Supply (Charge box) : Input: DC 5V, 40mAh Software Version : V-800_AC6969A2_H6_221108_A47D3F69_update- 2(25)-R V-800_AC6969A2_H6_221108_09792EB1_update- 2(25)-L Hardware Version : E6S-6969-4L-5V Remark: The antenna gain provided by the applicant, the adapter and verified for the RF conduction test and adapter provided by TOBY test lab. Note: More test information about the EUT please refer the RF Test Report. Report No.: TBR-C-202211-0075-1 Page: 2 of 3 TB-RF-074-1.0 The RF Exposure Evaluation for FCC: SAR Test Exclusion Calculations FCC: According to 447498 D04 Interim General RF Exposure Guidance v01. The SAR-based exemption formula of § 1.1307(b)(3)(i)(B), repeated here as Formula (B.2), applies for single fixed, mobile, and portable RF sources with available maximum time-averaged power or effective radiated power (ERP), whichever is greater, of less than or equal to the threshold P th (mW). This method shall only be used at separation distances from 0.5 cm to 40 cm and at frequencies from 0.3 GHz to 6 GHz (inclusive). P th is given by Formula (B.2). and f is in GHz, d is the separation distance (cm), and ERP 20cm is per Formula (B.1). The example values shown in Table B.2 are for illustration only. Table B.2—Example Power Thresholds (mW) Report No.: TBR-C-202211-0075-1 Page: 3 of 3 TB-RF-074-1.0 Calculation: Test separation: 5mm Bluetooth GFSK Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mW) Limit P th (mW) 2.402 0.172 0±1 1 1.259 3 2.441 0.417 0±1 1 1.259 3 2.480 0.44 0±1 1 1.259 3 Bluetooth π/4-DQPSK Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mW) Limit P th (mW) 2.402 0.952 1±1 2 1.585 3 2.441 1.18 1±1 2 1.585 3 2.480 1.213 1±1 2 1.585 3 Bluetooth 8-DPSK Frequency (GHz) Conducted Power (dBm) Turn-up Power Tolerance (dB) Max power of tune up tolerance (dBm) Max power of tune up tolerance (mW) Limit P th (mW) 2.402 1.497 1±1 2 1.585 3 2.441 1.725 2±1 3 1.995 3 2.480 1.786 2±1 3 1.995 3 Conclusion: The measurement results comply with the FCC Limit per 47 CFR 2.1093 for the uncontrolled RF Exposure and SAR Exclusion Threshold per KDB 447498 v06, No SAR is required. -----END OF REPORT-----

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 1 of 48 TB-RF-074-1.0 1/F.,Building 6, Rundongsheng Industrial Zone, Longzhu, Xixiang, Bao'an District, Shenzhen, Guangdong, China Tel: +86 75526509301 Fax: +86 75526509195 Radio Test Report FCC ID:2A9CD-TWS Report No. : TBR-C-202211-0075-2 Applicant : Shenzhen Senyang Zhiyuan Technology Co., Ltd Equipment Under Test (EUT) EUT Name : Wireless headset Model No. : TWS Series Model No. : Please see page 6 Brand Name : EDS EIDESS, AIDESS, NEW SENYANG, EIDESS, WOSD Sample ID : 202211-0075-01 & 202211-0075-02 Receipt Date : 2022-11-07 Test Date : 2022-11-07 to 2022-11-17 Issue Date : 2022-11-17 Standards : FCC Part 15 Subpart C 15.247 Test Method : ANSI C63.10: 2013 KDB 558074 D01 15.247 Meas Guidance v05r02 Conclusions : PASS In the configuration tested, the EUT complied with the standards specified above. Witness Engineer : Camille Li Engineer Supervisor : Ivan Su Engineer Manager : Ray Lai This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in the report. Report No.: TBR-C-202211-0075-2 Page: 2 of 48 TB-RF-074-1.0 Contents CONTENTS ............................................................................................................................................. 2 1. GENERAL INFORMATION ABOUT EUT.............................................................................. 6 1.1 Client Information ................................................................................................................. 6 1.2 General Description of EUT (Equipment Under Test) ................................................... 6 1.3 Block Diagram Showing the Configuration of System Tested ...................................... 8 1.4 Description of Support Units .............................................................................................. 8 1.6 Description of Test Software Setting .............................................................................. 10 1.7 Measurement Uncertainty ................................................................................................ 10 1.8 Test Facility ......................................................................................................................... 11 2. TEST SUMMARY ..................................................................................................................... 12 3. TEST SOFTWARE ................................................................................................................... 12 4. TEST EQUIPMENT .................................................................................................................. 13 5. CONDUCTED EMISSION ....................................................................................................... 14 5.1 Test Standard and Limit .................................................................................................... 14 5.2 Test Setup ........................................................................................................................... 14 5.3 Test Procedure ................................................................................................................... 14 5.4 Deviation From Test Standard ......................................................................................... 15 5.5 EUT Operating Mode ........................................................................................................ 15 5.6 Test Data ............................................................................................................................. 15 6. RADIATED AND CONDUCTED UNWANTED EMISSIONS ............................................ 16 6.1 Test Standard and Limit .................................................................................................... 16 6.2 Test Setup ........................................................................................................................... 18 6.3 Test Procedure ................................................................................................................... 19 6.4 Deviation From Test Standard ......................................................................................... 20 6.5 EUT Operating Mode ........................................................................................................ 20 6.6 Test Data ............................................................................................................................. 20 7. EMISSIONS IN RESTRICTED BANDS ............................................................................... 21 7.1 Test Standard and Limit .................................................................................................... 21 7.2 Test Setup ........................................................................................................................... 21 7.3 Test Procedure ................................................................................................................... 22 7.4 Deviation From Test Standard ......................................................................................... 24 7.5 EUT Operating Mode ........................................................................................................ 24 7.6 Test Data ............................................................................................................................. 24 Report No.: TBR-C-202211-0075-2 Page: 3 of 48 TB-RF-074-1.0 8. 99% OCCUPIED AND 20DB BANDWIDTH ........................................................................ 25 8.1 Test Standard and Limit .................................................................................................... 25 8.2 Test Setup ..............…

Text truncated - open the document above for the full version.

Summary InvertedF AntennaSpecification ITEMANT SPEC Model Name2.4G ANT Center Frequency HorizontalVertical 2400MHz2400MHz2500MHz2400MHz2400MHz2500MHz -8.46(dBi)-8.46(dBi)-10.82(dBi)-9.06(dBi)-9.7(dBi)-10.58(dBi) MAX. Gain-8.46(dBi) PolarizationHorizontaland Vertical AzimuthBeam Pattern Omni-directional Impedance50 Ohm AntennaLength38.20mm ManufactureZHUHAIJIELI TECHNOLOGYCO.,LTD AntennaPhoto & Length(mm) Horizontal:2400 MHz 2450 MHz 2500 MHz Power(dBm) Max: 0 Min: -40 Scale:5/div Frequency (MHz) Gain(dBi) MaxMinAvg 2400-8.46-30.0815-8.48713 2450-8.46-38.5605-7.88012 2500-10.82-24.0318-6.79139 Vertical:2400 MHz 2450 MHz 2500 MHz Power(dBm) Max: 0 Min: -30 Scale:5/div Frequency (MHz) Gain(dBi) MaxMinAvg 2400-9.06-24.1420-13.0295 2450-9.7-26.5836-10.6700 2500-10.58-30.4301-9.70536 ANT Test Labs：Attestationof GlobalComplianceCo., Ltd.

Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 1 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 RF Test Data for Bluetooth(BDR+EDR) (Conducted Measurements) General Description of EUT Product Name: Wireless headset Test Model: TWS Sample ID: 202211-0075-01 Environmental Conditions Temperature: 25°C Relative Humidity: 55% Test Voltage: DC 3.7V Test Engineer: Huang jian ping Note: For a more detailed features description, please refer to the report TBR-C-202211-0075-2 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 2 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Contents 1. Duty Cycle ........................................................................................................................................................................................... 3 2. Maximum Conducted Output Power ................................................................................................................................................. 9 3. -20dB Bandwidth .............................................................................................................................................................................. 15 4. Occupied Channel Bandwidth ......................................................................................................................................................... 21 5. Band Edge ........................................................................................................................................................................................ 27 6. Band Edge(Hopping) ........................................................................................................................................................................ 34 7. Conducted RF Spurious Emission .................................................................................................................................................. 41 8. Restrict Band .................................................................................................................................................................................... 51 9. Carrier Frequencies Separation....................................................................................................................................................... 58 10. Number of Hopping Channel ......................................................................................................................................................... 61 11. Dwell Time ....................................................................................................................................................................................... 64 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 3 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 1. Duty Cycle Condition Mode Frequency (MHz) Antenna Duty Cycle (%) Correction Factor (dB) 1/T (kHz) NVNT 1-DH1 2402 Ant1 29.6 5.29 2.7 NVNT 1-DH1 2441 Ant1 30.4 5.17 2.63 NVNT 1-DH1 2480 Ant1 29.6 5.29 2.7 NVNT 2-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 2-DH1 2480 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2402 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2441 Ant1 31.2 5.06 2.56 NVNT 3-DH1 2480 Ant1 31.2 5.06 2.56 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 4 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Test Graphs Duty Cycle NVNT 1-DH1 2402MHz Ant1 Duty Cycle NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 5 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Duty Cycle NVNT 1-DH1 2480MHz Ant1 Duty Cycle NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 6 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Duty Cycle NVNT 2-DH1 2441MHz Ant1 Duty Cycle NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 7 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2402MHz Ant1 Duty Cycle NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 8 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Duty Cycle NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 9 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 2. Maximum Conducted Output Power Condition Mode Frequency (MHz) Antenna Conducted Power (dBm) Limit (dBm) Verdict NVNT 1-DH1 2402 Ant1 0.172 21 Pass NVNT 1-DH1 2441 Ant1 0.417 21 Pass NVNT 1-DH1 2480 Ant1 0.44 21 Pass NVNT 2-DH1 2402 Ant1 0.952 21 Pass NVNT 2-DH1 2441 Ant1 1.18 21 Pass NVNT 2-DH1 2480 Ant1 1.213 21 Pass NVNT 3-DH1 2402 Ant1 1.497 21 Pass NVNT 3-DH1 2441 Ant1 1.725 21 Pass NVNT 3-DH1 2480 Ant1 1.786 21 Pass Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 10 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Test Graphs Power NVNT 1-DH1 2402MHz Ant1 Power NVNT 1-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 11 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Power NVNT 1-DH1 2480MHz Ant1 Power NVNT 2-DH1 2402MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 12 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Power NVNT 2-DH1 2441MHz Ant1 Power NVNT 2-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 13 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Power NVNT 3-DH1 2402MHz Ant1 Power NVNT 3-DH1 2441MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 14 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 Power NVNT 3-DH1 2480MHz Ant1 Shenzhen Toby Technology Co., Ltd. Report No.: TBR-C-202211-0075-2 Page: 15 of 69 FCC ID:2A9CD-TWS TB-RF-074-1.0 3. -20dB Bandwidth Condition Mode Frequency (MHz) Antenna -20 dB Bandwidth (MHz) Limit -20 dB Bandwidth (MHz) Verdict NVNT 1-DH1 2402 Ant1 1.03 Not Specified Pass NVNT 1-DH1 2441 Ant1 1.04 Not Specified Pass NVNT 1-DH1 2480 Ant1 1.04 Not Specified Pass NVNT 2-DH1 2402 Ant1 1.3 Not Specified Pass NVNT 2-DH1 2441 Ant1 1.26 Not Specified Pass N…

Text truncated - open the document above for the full version.

FCC ID: 2A9CD-TWS TB-RF-074-1.0 Appendix IV EUT Test Photographs 15C Test Setup Photo of Setup for Radiated Emission (Above 1 GHz) Photo of Setup for Radiated Emission (Above 1 GHz) FCC ID: 2A9CD-TWS TB-RF-074-1.0 Photo of Setup for Radiated Emission (Below 1 GHz) Photo of Setup for Conducted Emission -----END OF REPORT-----