2A9FA-07-0026-915-AThe receiver is used to collect the data from the Ground Engaging Tool IoT sensors and acts as an interface with the rest of the system. Using a 12-32VDC supply, the device used GSFK modulation to receive the data in the 915MHz ISM band.

T1340 USER MANUAL January 2023 Receiver Dual Frequency For assistance, email [email protected] or call (+61) 1300 33 8482 The T1340 is a wireless receiver and processing module installed onto excavators for the GET Trakka breakage detection solution. It is designed to read sensor tag data, process and provide local breakage alarms. The T1340 receives data wirelessly from G.E.T. sensors and reference sensors in the vicinity using external antennas. T1340 Operating Bandwidth 920 – 925 MHz Channels 4 Selectable Channel Spacing 1 MHz RFID Type Active Transmitter / Receiver / Transceiver Receiver Transmission Power N/A Transmission Time N/A Transmission Frequency / Period N/A Duty Cycle N/A Power 24V DC 1.0A Product Operating Temperature -10 to +70 °C Dimensions 208mm W x 53mm H x 132mm D Weight 1.1 kg Accessories NA This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required. Warning: Any changes or modifications not expressively approved by the grantee could void the user's authority to operate this equipment.

Rev 1/26/2023 CR Mining 3/271 Treasure Rd N, Welshpool WA 6106 Australia Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-01-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A9FA-07-0026-915-A Julien Lopez (“CR Mining”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely, Julien Lopez

Rev 1/26/2023 CR Mining 3/271 Treasure Rd N, Welshpool WA 6106 Australia Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-01-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A9FA-07-0026-915-A Julien Lopez (“CR Mining”) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. Sincerely, Julien Lopez

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 04-11-2023 Ref: Attestation Statements Part 2.911(d)(7) Filing FCC ID: 2A9FA-07-0026-915-A FRN:0033098336 CR Mining certifies that, as of the date of the filing of the application, Capitol Corporate Services, Inc is our designated U.S. agent for service of process for the above referenced FCC ID. CR Mining accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Capitol Corporate Services, Inc accepts, as of the date of the filing of the application, the obligation of the designated U.S. a gent for service of process for the above referenced FCC ID. Designated U.S. Agent Information: Name:Capitol Corporate Services, Inc Address:698 12th St SE Ste 200, Salem OR 97301 Contact Person: Yvette Cleveland Tel.:800-345-4647 Email:[email protected] Sincerely, CR MiningCapitol Corporate Services, Inc JULIEN LOPEZYvette Cleveland, Assistant Secretary

Connect with us www.CRmining.com Federal Communications Commission Authorization and Evaluation Division Date: 16/01/2023 Conf identiality Request regarding application f or certif ication of FCC ID: 2A9FA-07-0026-915-A Pursuant to Sections 0.457 and 0.459 of the Commission’s Rules, we hereby request conf idential treatment of inf ormation accompanying this application as outlined below: Exhibit Type for 2A9FA-07-0026-915-A File Name Schematic 2A9FA-07-0026-915-A. Receiver-GT Tag Rx_Sche- matic.pdf Block Diagram 2A9FA-07-0026-915-A. Receiver-HW_Architecture.pdf Operational Description 2A9FA-07-0026-915-A. Receiver-Operation Descrip- tion_Specif ication.pdf The above materials contain trade secrets and proprietary inf ormation not customarily released to the public. The public disclosure of these materials may be harmf ul to the applicant and provide unjustif ied benef its to its competitors. The applicant understands that pursuant to Section 0.457 of the Rules, disclosure of this application and all accompany- ing documentation will not be made bef ore the date of the Grant f or this application. Sincerely, Julien Lopez Production Engineer (Electronics)

Connect with us www.CRmining.com Federal Communications Commission Authorization and Evaluation Division 1435 Oakland Mills Road Columbia, MD 21046 Date: 16/01/2023 SUBJECT: FCC Application for FCC ID: 2A9FA-07-0026-915-A To Whom It May Concern: We, CR Mining, hereby authorize Shabbir Ahmed at EMC Technologies Pty Ltd to act on our behalf, to apply to the Federal Communications Commission for FCC approval of our equipment. Any and all acts carried out by Shabbir Ahmed at EMC Technologies on our behalf shall have the same effect as acts of our own. This is to advise that we are in full compliance with the Anti- Drug Abuse Act. We, the applicant, are not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 USC853a, and no party to the application is subject to a denial of federal benefits pursuant to that section. Regards, Julien Lopez Production Engineer (Electronics)

Page 1 of 5 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 Photograph Annex A: External - EUT Photographs CR Mining T1340 Receiver REPORT: E2211-1609C Annex A DATE: April, 2023 EMC Bayswater Test Report E2211-1609C Annex A Page 2 of 5 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photographs Number Photograph Description 1 EUT – External views 2 3 4 5 6 7 8 9 Support Equipment – Cabinet 10 11 12 13 14 15 EMC Bayswater Test Report E2211-1609C Annex A Page 3 of 5 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 1 Photograph 2 Photograph 3 Photograph 4 Photograph 5 Photograph 6 EMC Bayswater Test Report E2211-1609C Annex A Page 4 of 5 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 7 Photograph 8 Photograph 9 Photograph 10 Photograph 11 Photograph 12 EMC Bayswater Test Report E2211-1609C Annex A Page 5 of 5 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 13 Photograph 14 Photograph 15

2A9FA-07-0026-915-A Label Draft Proposed Label Detail 1 1 THE DESIGN AND TECHNICAL INFORMATION DETAILED ON THIS DRAWING IS THE EXCLUSIVE PROPERTY OF CQMS RAZER PTY LTD. IT IS ISSUED ON THE STRICT CONDITION THAT, EXCEPT WITH OUR WRITTEN PERMISSION, IT MUST NOT BE USED FOR ANY PURPOSE OTHER THAN ITS STATED PURPOSE OF ISSUE. PH: 1800 987 525 WEB: www.crmining.com Page of REVISIONS REVDESCRIPTIONDATEAPPROVED NOTES: The product will have a label on the top lower section as illustrated below. The proposed label will be using ORAGET, reference 3164G 165x25 (mm) in size. The label will be market with the FCC ID: 2A9FA- 07-0026-915-A, and the compliance statement from FCC Part 15.19 as illustrated below. 1Draft23/01/2023 NH 1Draft23/01/2023 NH Proposed ID Location 165mmx 25mm Label Details 165.00 25.00 FCC ID: 2A9FA-07-0026-915-A (1) This device may cause interference; and This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (2) This device must accept any interference, including interference that may cause undesired operations of the device FCC ID: 2A9FA-07-0026-915-A (1) This device may cause interference; and This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (2) This device must accept any interference, including interference that may cause undesired operations of the device

Page 1 of 3 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 Photograph Annex B: Internal - EUT Photographs CR Mining T1340 Receiver REPORT: E2211-1609C Annex B DATE: April, 2023 EMC Bayswater Test Report E2211-1609C Annex B Page 2 of 3 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photographs Number Photograph Description 1 EUT – Internal views 2 3 4 5 EMC Bayswater Test Report E2211-1609C Annex B Page 3 of 3 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 1 Photograph 2 Photograph 3 Photograph 4 Photograph 5

Page 1 of 19 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 EMC COMPLIANCE REPORT FCC Certification Test Report In accordance with: CFR47 FCC Part 15, Subpart B (Class A) CR Mining T1340 Receiver REPORT: E2211-1609C DATE: April, 2023 Accreditation Number: 18553 Accredited for compliance with ISO/IEC 17025 – Testing The results of the tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing and calibration reports. This document may not be reproduced except in full without approval from EMC Bayswater, with the exception of the certificate on page 2. FCC ID: 2A9FA-07-0026-915-A EMC Bayswater Test Report E2211-1609C Page 2 of 19 Prepared & tested by: Approved by: 21/04/2023 11:28 Adnan Zaman (EMC Test Engineer) Neville Liyanapatabendige (Manager) Date Accreditation number: 18553. The results of the tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document may not be reproduced except in full without approval from EMC Bayswater, with the exception of the certificate on page 2. Certificate of Compliance Certification EMC Compliance Report EMC Bayswater Test Report: E2211-1609C Issue Date: April, 2023 Product(s): Receiver Model No: T1340 Serial No: 2022-010 Variant: None stated FCC ID: 2A9FA-07-0026-915-A Customer Details: Mr Julien Lopez CR Mining 3/271 Treasure Road North Welshpool WA 6106 Australia Phone No: +61 (08) 6253 3913 e-mail: [email protected] Test Specification: CFR47 FCC Part 15, Subpart B (Class A) Results Summary: Radiated Emissions – CFR47 FCC Part 15, section 15.109 Complied (Class A) Conducted Emissions – CFR47 FCC Part 15, section 15.107 N/A* *The EUT is a battery powered device and does not connect to an AC mains supply Test Date(s): 22 nd of November, 2022 Test House (Issued By): EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South Victoria, 3136 Australia FCC Accredited Test Firm Registration number: 527798 FCC Accredited Test Firm Designation number: AU0004 Phone No: +61 3 9761 5888 e-mail: [email protected] Fax No: +61 3 8761 6547 Web: www.emcbayswater.com.au This is to certify that the necessary measurements were made by EMC Bayswater Pty Ltd, and that the CR Mining, T1340, Receiver (Serial No: 2022-010), has been tested in accordance with requirements contained in the appropriate commission regulations. EMC Bayswater Test Report E2211-1609C Page 3 of 19 Accreditation number: 18553. The results of the tests, calibrations and/or measurements included in this document are traceable to Australian/national standards. NATA is a signatory to the ILAC Mutual Recognition Arrangement for the mutual recognition of the equivalence of testing, calibration and inspection reports. This document may not be reproduced except in full without approval from EMC Bayswater, with the exception of the certificate on page 2. FCC Certification Test Report for CR Mining Contents 1. Introduction ................................................................................................................... 4 2. Test Report Revision History ........................................................................................ 4 3. Report Information ........................................................................................................ 4 4. Summary of Results ...................................................................................................... 4 5. Product Sample, Configuration & Modifications ......................................................... 5 5.1. Product Sample Details ............................................................................................ 5 5.2. Product description ................................................................................................... 5 5.3. Support Equipment ................................................................................................... 5 5.4. Product operating modes .......................................................................................... 6 5.5. Product operating mode for testing ........................................................................... 6 5.6. EUT Configuration .................................................................................................... 6 5.7. Modifications ............................................................................................................. 6 6. Test Facility & Equipment ............................................................................................. 7 6.1. Test Facility .............................................................................................................. 7 6.2. Test Equipment ........................................................................................................ 7 7. Referenced Standards ................................................................................................... 7 8. Referenced Documents ................................................................................................. 7 9. Radiated Emissions ....................................................................................................... 8 9.1. Test Procedure ......................................................................................................... 8 9.2. Limits .......................................................................................................................10 9.3. Test Results .......................................…

Text truncated - open the document above for the full version.

Page 1 of 3 EMC ENGINEERS & LABORATORIES EMC Bayswater Pty Ltd 18/88 Merrindale Drive Croydon South, Victoria, 3136, Australia Telephone: +61 3 9761 5888 Facsimile: +61 3 8761 6547 Email: [email protected] ABN: 49 112 221 333 Photograph Annex C: Test Configuration Photographs CR Mining T1340 Receiver REPORT: E2211-1609C Annex C DATE: April, 2023 EMC Bayswater Test Report E2211-1609C Annex C Page 2 of 3 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photographs Number Photograph Description 1 Radiated Emissions – Test Configuration 2 3 4 5 EMC Bayswater Test Report E2211-1609C Annex C Page 3 of 3 This document may not be reproduced, except in full, without written approval from EMC Bayswater Pty Ltd. Photograph 1 Photograph 2 Photograph 3 Photograph 4 Photograph 5