2A9IA-GR-09-01Universal Remote Control

MANUAL OF REMOTE CONTROL A M Mo TuWeFiThSa Su MANUAL OF REMOTE CONTROL CONTENTS REMOTE CONTROL 1 1. Parameters 22. Install The Battery CERTIFIED STATEMENT 131. FCC Statement REMOTE CONTROL PROGRAMMING 31. Enter Setting Mode 4-122-14. Motor Programming 1 s x2 Remote Holder REMOTE CONTROL 1. PARAMETERS Knob Adjust the opening percentage 1-9 Channel : One channel corresponds to one blind. Close Stop Slight Open Open Favorite Position Slight Open Control All Blinds (max 9 blinds) Lithium Cell CR2450 3V P2P1 P1 ButtonP2 Button Back If there are 9 blinds, and you want to open blinds 1, 3, and 5 together, the operation method is: Press 1, 3, and 5 in sequence, and then press "Open". Example Operation: 2 2. INSTALL THE BATTERY Lithium Cell CR2450 3V P2P1 PULL REMOVE BEFORE USE Lithuim Cell CR2450 3V P2P1 Lithium Cell CR2450 3V P2P1 Lithuim Cell CR2450 3V P2P1 Your blind has been programmed before shipment. Please use it directly after installation. INSTALL THE REMOTE HOLDER ON WALL Method 1 Back Method 2 s 3 REMOTE CONTROL PROGRAMMING Green light flashing indicates setting mode. 1. ENTER SETTING MODE It will exit setting mode if hold “P1” for 5s again or no operation for 3 mins. Hold " P1 " for 5s Lithium Cell CR2450 3V P2P1 01. 02. Choose the channel you want to set from "1-9". 4 2. SET FAVORITE POSITION 1. The favorite position is not set at factory. 2. Before setting the favorite running position, please ensure that the top and bottom limit positions have been set. 3. Please ensure that the remote is in setting mode before following the steps below: 01. 02. Hold " " for 3s The motor responds. The motor responds. Hold " " for 3s 3. DELETE FAVORITE POSITION Press " Channel 1 " (Take channel 1 for example) 5 4. HOW TO CHANGE UP/DOWN DIRECTION Please ensure that the remote is in setting mode before following the steps below: (Take channel 1 for example) Hold " Channel 1 " then Press " " for x1 The motor responds. 6 5. HOW TO ADJUST SHADES RUNNING SPEED Add speed Reduce speed 1. Please ensure that the remote is in setting mode before following the steps below: 2. If the motor does not jog, it may have reached the maximum or minimum speed. There are three speed settings available. Hold " " for 3s Hold " " for 3s The motor responds. The motor responds. 7 (Take channel 1 for example) Hold " Channel 1 " then Press " " for x1 7. DELETE BOTTOM LIMIT POSITION Please ensure that the remote is in setting mode before following the steps below: 8. DELETE TOP & BOTTOM LIMIT POSITION 1. The favorite position will also be deleted. 2. Please ensure that the remote is in setting mode before following the steps below: Hold " " for 3s 6. DELETE TOP LIMIT POSITION Please ensure that the remote is in setting mode before following the steps below: (Take channel 1 for example) Hold " Channel 1 " then Press " " for x1 The motor responds. The motor responds. The motor responds. 8 Move the shade to the desired top limit position. 9. SET TOP LIMIT POSITIONS Please ensure that the remote is in setting mode before following the steps below: 01. 02. Move the shade to the desired bottom limit position. 10. SET BOTTOM LIMIT POSITIONS Please ensure that the remote is in setting mode before following the steps below: 01. 02. (Take channel 1 for example) Hold " Channel 1 " then Press " " for x1 (Take channel 1 for example) Hold " Channel 1 " then Press " " for x1 The motor responds. The motor responds. 9 11. UNPAIR THE MOTOR 1. All paired remotes on the current channel won't be able to control the motor after the step. 2. Please ensure that the remote is in setting mode before following the steps below: Hold " " for 3s then Press " " for x1 (Take channel 1 for example) The motor responds. 10 The motor responds. 12. RE-PAIR THE MOTOR Please ensure that the remote is in setting mode before following the steps below: 02. Press " P2 " x1 Lithium Cell CR2450 3V P2P1 Press " P1 " x1 03. Lithium Cell CR2450 3V P2P1 Hold the motor button for 2s 01. 11 Paired remote "A" 13. ADD NEW REMOTE "B" Please ensure that the remote is in setting mode before following the steps below: 01. Ensure that the unpaired remote "B" has entered setting mode. Choose the channel you want to set from 1-9. Please refer to Page 3 for this step. A B B B 01. 02. 03. Lithium Cell CR2450 3V P2P1 Press " P1 " x1 04. (Take channel 1 for example) Hold " Channel 1 " then Press " " for x1 Lithium Cell CR2450 3V P2P1 Press " P2 " x1 The motor responds. The motor responds. 12 14. KNOB FUNCTION ADJUST THE OPENING PERCENTAGE DOT MOVE Please ensure that the remote is not in setting mode before following the steps below: If it's in setting mode, please refer to page 3 to exit setting mode. 1. At each rotation, the current black mark is the initial position. 2. Rotate it for one cycle, and the shade will open by 40%. For Shangri-la Shades, please move the shade to bottom limit position and rotate the knob 1-2 grids to achieve dimming function. Press " Channel 1 " (Take channel 1 for example) Rotate clockwise The shade moves down. 01. 02. Rotate 1-2 grids The shade moves up or down 1-2 grids. Rotate counterclockwise The shade moves up. 13 FCC ID: 2A9IA-GR-09-01 Please take attention that changes or modification not expressly qpproved by the party responsible for compliance could void the user's quthority to operate the equiipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmfu linterference, and. (2) This device must accept any interference received, including interference that may cause undesired operation. CERTIFIED STATEMENT 1. FCC STATEMENT

Changzhou Yooksmart Innovation Co.,Ltd U.S. Agent Designation for Service of Process (Applicant and U.S. Agent are Separate Parties) TO: Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 ATTENTION: FCC Certification – Section 2.911(d)(7) Information Designated U.S. Agent Company Name: United Consulting Technology Services Co., Ltd. FRN: 0033495714 Contact Name: David Wu Street Address: 17800 CASTLETON ST STE 665 CITY OF INDUSTRY City/Province/Zip: CA 91748 Telephone No: (626) 217-4022 Email: [email protected] This letter is to confirm that we (“the Designated U.S. Agent) have accepted the responsibility to act as the Designated U.S. Agent for Service of Process as required by section 47 CFR 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature: Date: 2023-07-21 Signed by (Printed Name/Title): David Wu/CEO The Applicant acknowledges that they must maintain an agent for no less than one year after terminating all marketing and importation OR the conclusion of any Commission-related proceeding involving the equipment. The applicant further acknowledges their responsibility to inform the FCC whenever the Designated U.S. Agent information above changes. Applicant Company name: Changzhou Yooksmart Innovation Co.,Ltd Grantee Code: 2A9IA FCC ID: 2A9IA-GR-09-01 Contact Name: Jereme Lau Address: 1F, Building 6C, No. 8 Xihu Road, Jintong Industrial Park, Changzhou, China Telephone No: 86-18018200030 Email: [email protected] Applicant Signature: Date: 2023-07-21 Signed by (Printed Name/Title): Jereme Lau

Applicant Declaration QSF27-14-04 Rev 1.0 Rev. Feb 6, 2023 Page 1 of 1 Original Issue: Jan. 4, 2021 SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Legal Business Name Changzhou Yooksmart Innovation Co.,Ltd Address 1F, Building 6C, No. 8 Xihu Road, Jintong Industrial Park, Changzhou, China Grantee Code 2A9IA FCC ID 2A9IA-GR-09-01 Authorized Contact Name Jereme Lau Contact Email [email protected] Contact Phone 86-18018200030 I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.911(d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB394321, the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321. e) in accordance with ISO 17065, FCC KDB641163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1.2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc.(TCB) terms and conditions. Link to CFRs: https://www.fcc.gov/wireless/bureau-divisions/technologies-systems-and-innovation-division/rules-regulations-title-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-100: https://www.ic.gc.ca/eic/site/smt-gst.nsf/eng/sf01130.html Link to the Covered List: Covered List [Changzhou Yooksmart Innovation Co.,Ltd] (“the applicant”) certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [Changzhou Yooksmart Innovation Co.,Ltd] (“the applicant”) certifies that, as of the date of the filing of the application, the applicant [is not] identified on the Covered list, established pursuant to §1.50002, as an entity producing “covered” equipment. Applicant Signature: Date: 2023-07-20 Print Name: Jereme Lau Title: Manager *NOTE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database

Changzhou Yooksmart Innovation Co.,Ltd Date: 2023-07-19 TO: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2A9IA-GR-09-01 To whom it may concern: We, the undersigned, hereby authorize Parlam Zhan to act on our behalf in all manners relating to application for equipment authorization with respect to the FCC ID above, including signing of all documents relating to these matters. Any and all acts carried out by the agent on our behalf shall have the same effect as acts of our own. We, the undersigned, hereby certify that we are not subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 853(a). Where our agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by SGS North America, Inc., still resides with Changzhou Yooksmart Innovation Co.,Ltd. This authorization is valid until further written notice from the applicant. Name (Printed): Jereme Lau Title: Manager Signature: On behalf of Company: Changzhou Yooksmart Innovation Co.,Ltd Telephone: 86-18018200030

Changzhou Yooksmart Innovation Co.,Ltd To: SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia United States From: Changzhou Yooksmart Innovation Co.,Ltd 1F, Building 6C, No. 8 Xihu Road, Jintong Industrial Park, Changzhou, China Regarding: Confidentiality Request regarding application for FCC ID: 2A9IA-GR-09-01 LONG TERM CONFIDENTIALITY Pursuant to 47 CFR Section 0.459 and 0.457 of the commission’s rules, the applicant hereby request confidential treatment of the documents listed below, associated with the certification application referenced above. Schematic(s) Block Diagrams Operational Descriptions The documents above contain proprietary information not released to the public. Public disclosure of this information may prove harmful to the business of the applicant. Sincerely, Signature: Printed Name (on file with the FCC associated with the Grantee Code): Jereme Lau Title: Manager Company Name: Changzhou Yooksmart Innovation Co.,Ltd

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 4 External Photos for SHCR2305001116HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 4 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 4

： Remark: It’s hard to put FCC statement on the product due to device’s irregular appearance, FCC statement will be placed in the user manual which the device is marketed.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 5 Internal Photos for SHCR2305001116HS SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 5 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 5 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 4 of 5 RF Antenna SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 5 of 5

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111602 Page: 1 of 10 Parlam Zhan Laboratory Manager 1 Cover Page RF Exposure Evaluation Report Application No.: SHCR2305001116HS FCC ID: 2A9IA-GR-09-01 Applicant: Changzhou Yooksmart Innovation Co., Ltd Address of Applicant: 1F, Building 6C, No.8 Xihu Road, Jintong Industrial Park, Changzhou, China Manufacturer: Changzhou Yooksmart Innovation Co., Ltd Address of Manufacturer: 1F, Building 6C, No.8 Xihu Road, Jintong Industrial Park, Changzhou, China Factory: Changzhou Yooksmart Innovation Co., Ltd Address of Factory: 1F, Building 6C, No.8 Xihu Road, Jintong Industrial Park, Changzhou, China Equipment Under Test (EUT): EUT Name: Universal Remote Control Model No.: GR09-01 Trade Mark: Yooksmart Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2023-06-21 Date of Test: 2023-06-22 to 2023-06-27 Date of Issue: 2023-07-15 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111602 Page: 2 of 10 Revision Record Version Description Date Remark 00 Original 2023-07-15 / Authorized for issue by: Wade Zhang/Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111602 Page: 3 of 10 2 Contents Page 1 COVER PAGE ................................................................................................................................................. 1 2 CONTENTS ..................................................................................................................................................... 3 3 GENERAL INFORMATION........................................................................................................................... 4 3.1 GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 4 3.2 DETAILS OF E.U.T. .................................................................................................................................. 4 3.3 SEPARATION DISTANCE ................................................................................................................................. 4 3.4 TEST LOCATION ....................................................................................................................................... 5 3.5 TEST FACILITY .......................................................................................................................................... 5 4 TEST STANDARDS AND LIMITS ............................................................................................................... 6 5 FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS ................................................................ 6 5.1 RF EXPOSURE TEST EXEMPTIONS FOR SINGLE RF SOURCES .......................................................................... 6 5.1.1 Blanket 1 mW Blanket Exemption ................................................................ 6 5.1.2 MPE-based Exemption ..................................................................................... 6 5.1.3 SAR-based Exemption ..................................................................................... 7 5.2 RF EXPOSURE TEST EXEMPTIONS FOR SIMULTANEOUS TRANSMISSION ........................................................ 8 6 MEASUREMENT AND CALCULATION .................................................................................................. 10 6.1 MAXIMUM TRANSMIT POWER ................................................................................................................. 10 6.2 RF EXPOSURE CALCULATION ...................................................................................................................... 10 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111602 Page: 4 of 10 3 General Information 3.1 General Description of E.U.T. Power supply: DC 3V (1*CR2450 Battery) Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Operation Frequency 433.92MHz Channel Numbers: 1 Modulation Type: ASK Antenna Type: Spiral antenna 3.3 Separation Distance Separation distance between the antenna to person (R): ＜5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111602 Page: 5 of 10 3.4 Test Location All tests were performed at: SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. 588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China. Tel: +86 21 6191 5666 Fax: +86 21 6191 5678 No tests were sub-contracted. Note: 1. SGS is not responsible for wrong test results due to incorrect information (e.g. max. clock frequency, highest internal frequency, antenna gain, cable loss, etc ) is provided by the applicant. (if applicable). 2. SGS is not responsible for the authenticity, integrity and the validity of the conclusion based on results of the data provided by applicant. (if applicable). 3.5 Test Facility The test facility is recognized, certified, or accredited by the following organizations: • A2LA (Certificate No. 6332.01) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the American Association for Laboratory Accreditation(A2LA). • FCC (Designation Number: CN1301) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an accredited testing laboratory. • ISED (CAB Identifier: CN0020) SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. EMC Laboratory has been recognized by Innov…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111601 Page: 1 of 25 Parlam Zhan Laboratory Manager TEST REPORT Application No.: SHCR2305001116HS FCC ID: 2A9IA-GR-09-01 Applicant: Changzhou Yooksmart Innovation Co., Ltd Address of Applicant: 1F, Building 6C, No.8 Xihu Road, Jintong Industrial Park, Changzhou, China Manufacturer: Changzhou Yooksmart Innovation Co., Ltd Address of Manufacturer: 1F, Building 6C, No.8 Xihu Road, Jintong Industrial Park, Changzhou, China Factory: Changzhou Yooksmart Innovation Co., Ltd Address of Factory: 1F, Building 6C, No.8 Xihu Road, Jintong Industrial Park, Changzhou, China Equipment Under Test (EUT): EUT Name: Universal Remote Control Model No.: GR09-01 Trade Mark: Yooksmart Standard(s) : 47 CFR Part 15, Subpart C 15.231 Date of Receipt: 2023-06-21 Date of Test: 2023-06-22 to 2023-06-27 Date of Issue: 2023-07-15 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111601 Page: 2 of 25 Revision Record Version Description Date Remark 00 Original 2023-07-15 / Authorized for issue by: Wade Zhang/Project Engineer Parlam Zhan / Reviewer SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111601 Page: 3 of 25 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.231 N/A 47 CFR Part 15, Subpart C 15.203 Pass Radio Spectrum Matter Part Item Standard Method Requirement Result 20dB Bandwidth 47 CFR Part 15, Subpart C 15.231 ANSI C63.10 (2013) Section 6.9 47 CFR Part 15, Subpart C 15.231€ Pass Radiated Emissions below 1GHz ANSI C63.10 (2013) Section 6.4&6.5 47 CFR Part 15C Section 15.231(b) and 15.209 Pass Dwell Time (15.231(a)) ANSI C63.10 (2013) Section 7.5 47 CFR Part 15, Subpart C 15.231(a) Pass Field Strength of the Fundamental Signal (15.231(b)) ANSI C63.10 (2013) Section 6.5 47 CFR Part 15, Subpart C 15.231(b) Pass Radiated Emissions above 1GHz ANSI C63.10 (2013) Section 6.6 47 CFR Part 15C Section 15.231(b) and 15.209 Pass SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Report No.: SHCR230500111601 Page: 4 of 25 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 TEST SUMMARY ....................................................................................................................................... 3 3 CONTENTS ................................................................................................................................................ 4 4 GENERAL INFORMATION ........................................................................................................................ 6 4.1 DETAILS OF E.U.T. ............................................................................................................................... 6 4.2 DESCRIPTION OF SUPPORT UNITS ......................................................................................................... 6 4.3 MEASUREMENT UNCERTAINTY .............................................................................................................. 6 4.4 TEST LOCATION .................................................................................................................................... 7 4.5 TEST FACILITY ...................................................................................................................................... 7 4.6 DEVIATION FROM STANDARDS ............................................................................................................... 7 4.7 ABNORMALITIES FROM STANDARD CONDITIONS ..................................................................................... 7 5 EQUIPMENT LIST ...................................................................................................................................... 8 6 RADIO SPECTRUM TECHNICAL REQUIREMENT ................................................................................. 9 6.1 ANTENNA REQUIREMENT ...................................................................................................................... 9 6.1.1 Test Requirement: ......................................................................................................................... 9 6.1.2 Conclusion ..................................................................................................................................... 9 7 RADIO SPECTRUM MATTER TEST RESULTS ..................................................................................... 10 7.1 20DB BANDWIDTH .............................................................................................................................. 10 7.1.1 E.U.T. Operation .......................................................................................................................... 10 7.1.2 Test Mode Description ................................................................................................................. 10 7.1.3 Test Setup Diagram ..................................................................................................................... 10 7.1.4 Measurement Procedure and Data............................................................................................. 10 7.2 RADIATED EMISSIONS BELOW 1GHZ .................................................................................................... 12 7.2.1 E.U.T. Operation .......................................................................................................................... 12 7.2.2 Test Mode Description ................................................................................................................. 12 7.2.3 Test Setup Diagram ............................................................…

Text truncated - open the document above for the full version.

Justification statement for Antenna To: Federal Communication Commission Equipment Authorization Branch 7435 Oakland Mills Road Columbia, MID 21046 Regarding: FCC ID: 2A9IA-GR-09-01 Dear Sir/Madam, Only radiated measurements are used for EUT with FCC ID: 2A9IA-GR-09-01 to show compliance with FCC limits for fundamental and spurious emissions. All measurements were performed radiated and therefore additional antenna gain documentation is not required. The detailed information for antenna as below shows: Design Specifications Typical Antenna Type Spiral antenna Working Frequency 433.92MHz Overall Dimensions Length: 2.7cm RF antenna

SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 1 of 3 Appendix Photographs of Test Setup for SHCR2305001116HS Test Model No.: GR09-01 SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 2 of 3 Test Setup Photo Radiated Emissions below 1GHz Radiated Emissions above 1GHz SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. Page: 3 of 3 The EUT Details of Zoom