2A9K2-ICARD08Smart Card Finder

FCC Statement This device complies with part 15 of the FCC rules. Operation is subject to the following t wo conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equip ment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help important announcement Radiation Exposure Statement The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Rev1/26/2023 ShenZhenRiShengHuaTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2026.3.31 Ref:AttestationStatementsPart2.911(d)(5)(i)Filing FCCID: 2A9K2-ICARD08 ShenZhenRiShengHuaTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationissought isnot“covered”equipmentprohibitedfromreceivinganequipmentauthorizationpursuanttosection 2.903oftheFCCrules. ShenZhenRiShengHuaTechnologyCo.,Ltd.certifiesthattheequipmentforwhichauthorizationissought doesnotincludecybersecurityoranti-virussoftwareproducedorprovidedbyKasperskyLab,Inc.orany ofitssuccessorsandassignees,includingequipmentwithintegratedKasperskyLab,Inc.(oranyofits successorsandassignees)cybersecurityoranti-virussoftwarepursuanttoDA-24-886andKDB986446 D01CoveredEquipmentGuidancesectionB(2a). Deviceisinherentlycompliantbasedonhardwarelimitationsorsoftwarecontrols. or ASoftwareBillofMaterials(SBOM)isprovidedtotheTCBforreview,and Theend-userorthirdpartiescannotinstalladditionalsoftwareonthisdevice. Sincerely, (Applicantsignature) (Applicantprintedname)WeiHuangXiang Rev1/26/2023 ShenZhenRiShengHuaTechnologyCo.,Ltd. FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,MD21046 USA Date:2026.3.31 Ref:AttestationStatementsPart2.911(d)(5)(ii)Filing FCCID:2A9K2-ICARD08 ShenZhenRiShengHuaTechnologyCo.,Ltd.certifiesthat,asofthedateofthefilingoftheapplication,the applicantisnotidentifiedontheCoveredList(asaspecificallynamedentityoranyofitssubsidiariesor affiliates)asanentityproducing“covered”equipment. Sincerely, (Applicantsignature) (Applicantprintedname)WeiHuangXiang

PleasShenZhenRiShengHuaTechnologyCo.,Ltd. Date：2026.3.31 ProductModelNumber:ICARD08 FCCID：2A9K2-ICARD08 Towhomitmayconcern, Re:ProductCertificationRepresentativeAuthorizationLetter WeauthorizeQAILaboratoriesLtd.3980NorthFraserWay,BurnabyB.C. CanadaV5J5K5toactonourbehalfonallmattersconcerningtheabove namedequipment. Thisshallincludethefollowing: Testing Approvalapplicationsandprocedures WedeclarethatQAILaboratoriesLtd.isallowedtoforwardallinformation relatedtotheapprovalprojecttotheappliedcertificationbodyandtothe notificationentitiesandtodiscussanyissuesconcerningtheapproval application.AnyandallactscarriedoutbyQAILaboratoriesLtd.onour behalfshallhavethesameeffectasactsofourown. By: ContactListedonFCCWesbite Title:Engineer Email:[email protected] Telephone:0755-23576805 Onbehalfof:ShenZhenRiShengHuaTechnologyCo.,Ltd.

ShenZhenRiShengHuaTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:March31,2026 Subject;RequestforConfidentiality FCCID: 2A9K2-ICARD08 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthese documentsmightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantage inthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure SoftwareSecurityRequirementsforUNIIdevices Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:WeiHuangXiang Title:Engineer

ReportNo.:AB26030177 Page 1 of 2 AppendixBEUTExternalPhotos ReportNo.:AB26030177 Page 2 of 2

LabelandInformation FCCLabelSample Size:0.5cm*0.5cm FCCLabelSpecifications TextisBlackincolorandisjustified.Labelsareprintedinindelibleinkonpermanentadhesivebacking orsilk-screenedontotheEUTorshallbeaffixedataconspicuouslocationontheEUT.WheretheEUT isconstructedintwoormoresectionsconnectedbywiresandmarketedtogether,theabovestatement isrequiredtobeaffixedonlytothemaincontrolunit.WhentheEUTissosmallorforsuchusethatitis notpracticabletoplacethestatementonit,theaboveinformationshallbeplacedinaprominentlocation intheinstructionmanualorpamphletsuppliedtotheuseror,alternatively,shallbeplacedonthe containerinwhichthedeviceismarketed. FCCLabelLocation FCCID:2A9K2-ICARD08 Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjectto thefollowingtwoconditions:(1)thisdevicemaynotcauseharmful interference,and(2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation.

ReportNo.:AB26030177 Page1of3 AppendixCInternalPhotos ReportNo.:AB26030177 Page2of3 ReportNo.:AB26030177 Page3of3 ANT

ReportNo.:AB26030177FW02 AiboStandardTechnology(Shenzhen)Co.,Ltd. 101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark,TianliaoCommunity,YutangStreet, GuangmingDistrict,ShenzhenCity,GuangdongProvince,China Tel.:+8675585250797E-mail:[email protected]:www.aibonorm.com FCCTESTREPORT ReportNo. ............................................. : AB26030177FW02 FCCID ................................................... : 2A9K2-ICARD08 Applicant ................................................ : ShenZhenRiShengHuaTechnologyCo.,Ltd. Address ................................................. : Floor2,buildingE1qiangrongEastIndustrialZone,No.723,Zhoushi Road,jiuweicommunity. Manufacturer.....................................: ShenZhenRiShengHuaTechnologyCo.,Ltd. Address............................................: Floor2,buildingE1qiangrongEastIndustrialZone,No.723,Zhoushi Road,jiuweicommunity. ProductName......................................:SmartCardFinder TradeMark ............................................ : / TestModel ............................................. : ICARD08 AdditionalModel(s)..............................: / Standard................................................: FCC47CFR § 1.1310;FCC47CFR § 2.1093 KDB447498D01GeneralRFExposureGuidancev06 DateofReceipt....................................:2026.03.16 DateofTestDate ................................. :2026.03.17-2026.03.23 DateofIssue ........................................ :2026.03.24 TestResult............................................:Pass Compiledby: (PrintedName+Signature) HuaijieLi Supervisedby: (PrintedName+Signature) DavidHuang Approvedby: (PrintedName+Signature) JayLiu TestingLaboratoryName...................:AiboStandardTechnology(Shenzhen)Co.,Ltd. Address.................................................:101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark, TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen City,GuangdongProvince,China Thistestreportmaybeduplicatedcompletelyforlegalusewiththeapprovaloftheapplicant.Itshouldnotbe reproducedexceptinfull,withoutthewrittenapprovalofourlaboratory.Theclientshouldnotuseittoclaim productendorsementbyAibo.Thetestresultsinthereportonlyapplytothetestedsample.Thetestreport shallbeinvalidwithoutallthesignaturesoftestingengineers,reviewerandapprover.Anyobjectionsmustbe raisedtoAibowithin15dayssincethedatewhenthereportisreceived.Itwillnotbetakenintoconsideration beyondthislimit.Thetestreportmerelycorrespondtothetestsample. ReportNo.:AB26030177FW02 FCCTESTREPORT TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. EUT......................................... : SmartCardFinder TestModel.............................. : ICARD08 Applicant...............................:ShenZhenRiShengHuaTechnologyCo.,Ltd. Address...................................:Floor2,buildingE1qiangrongEastIndustrialZone,No.723,Zhoushi Road,jiuweicommunity. Manufacturer......................... : ShenZhenRiShengHuaTechnologyCo.,Ltd. Address...................................:Floor2,buildingE1qiangrongEastIndustrialZone,No.723,Zhoushi Road,jiuweicommunity. ReportNo.:AB26030177FW02 REPORTVERSION VersionNo.IssueDateDescription 012026.03.24InitialIssue ReportNo.:AB26030177FW02 TABLEOFCONTENTS 1.GENERALINFORMATION ...................................................................................................................................5 1.1.GENERALDESCRIPTIONOFEUT ..................................................................................................................5 1.2.DESCRIPTIONOFTESTFACILITY .................................................................................................................6 2. RFEXPOSUREEVALUATION ............................................................................................................................7 2.1LIMIT ..........................................................................................................................................................................7 2.2EVALUATIONRESULT ...............................................................................................................................................8 2.3CONCLUSION ............................................................................................................................................................8 ReportNo.:AB26030177FW02 1.GENERALINFORMATION 1.1.GENERALDESCRIPTIONOFEUT ProductName:SmartCardFinder TradeMark: / TestModel:ICARD08 AdditionalModel(s): / HardwareVersion:V2 SoftwareVersion:V1.7.0 PowerSupply:DC3.7V EUTSupportsFunction: (Providedbythecustomer) 2.4GHzISMBands TestSample(s)Number: AB26030177-01(EngineerSample) AB26030177-02(NormalSample) RadioSpecificationSubjecttothisReport BluetoothVersion:BluetoothLE FrequencyRange:2402MHz~2480MHz ModulationType:GFSK ChannelSpacing:2MHz ChannelNumber(s):40 AntennaType:ChipAntenna AntennaGain:2.7dBi ReportNo.:AB26030177FW02 1.2.DESCRIPTIONOFTESTFACILITY TestLab:AiboStandardTechnology(Shenzhen)Co.,Ltd. Address:101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark,TianliaoCommunity,YutangStreet, GuangmingDistrict,ShenzhenCity,GuangdongProvince,China Tel.:+8675585250797 E-mail:[email protected] Website:www.aibonorm.com Thetestfacilityisrecognized,certified,oraccreditedbythefollowingorganizations: A2LA-LabCertificateNo.:7514.01 AiboStandardTechnology(Shenzhen)Co.,Ltd.hasbeenaccreditedbyA2LAfortechnicalcompetence inthefieldofelectricaltesting,andprovedtobeincompliancewithISO/IEC17025GeneralRequirementsfor theCompetenceofTestingandCalibrationLaboratoriesandanyadditionalprogramrequirementsinthe identifiedfieldoftesting. FCCAccreditedLab. DesignationNumber:CN1411 TestFirmRegistrationNumber:567066 ISEDWirelessDeviceTestingLaboratories CABidentifier:CN0185 CompanyNumber:33924 ReportNo.:AB26030177FW02 2.RFEXPOSUREEVALUATION 2.1Limit AccordingtoKDB447498D01GeneralRFExposureGui…

Text truncated - open the document above for the full version.

ReportNo.:AB26030177FW01 1 / 25 AppendixDBLE DutyCycle ConditionModeFrequency(MHz)AntennaDutyCycle(%)CorrectionFactor(dB)1/T(kHz) NVNTBLE1M2402Ant149.563.051.62 NVNTBLE1M2440Ant149.63.051.62 NVNTBLE1M2480Ant149.583.051.62 NVNTBLE2M2402Ant1344.694.69 NVNTBLE2M2440Ant134.694.64.68 NVNTBLE2M2480Ant1344.694.69 ReportNo.:AB26030177FW01 2 / 25 TestGraphs DutyCycleNVNTBLE1M2402MHzAnt1 DutyCycleNVNTBLE1M2440MHzAnt1 ReportNo.:AB26030177FW01 3 / 25 DutyCycleNVNTBLE1M2480MHzAnt1 DutyCycleNVNTBLE2M2402MHzAnt1 ReportNo.:AB26030177FW01 4 / 25 DutyCycleNVNTBLE2M2440MHzAnt1 DutyCycleNVNTBLE2M2480MHzAnt1 ReportNo.:AB26030177FW01 5 / 25 MaximumConductedOutputPower ConditionModeFrequency(MHz)AntennaConductedPower(dBm)DutyFactor(dB)TotalPower(dBm)Limit(dBm)Verdict NVNTBLE1M2402Ant14.5604.5630Pass NVNTBLE1M2440Ant14.4504.4530Pass NVNTBLE1M2480Ant14.3604.3630Pass NVNTBLE2M2402Ant14.5804.5830Pass NVNTBLE2M2440Ant14.4704.4730Pass NVNTBLE2M2480Ant14.3704.3730Pass ReportNo.:AB26030177FW01 6 / 25 TestGraphs PowerNVNTBLE1M2402MHzAnt1 PowerNVNTBLE1M2440MHzAnt1 ReportNo.:AB26030177FW01 7 / 25 PowerNVNTBLE1M2480MHzAnt1 PowerNVNTBLE2M2402MHzAnt1 ReportNo.:AB26030177FW01 8 / 25 PowerNVNTBLE2M2440MHzAnt1 PowerNVNTBLE2M2480MHzAnt1 ReportNo.:AB26030177FW01 9 / 25 -6dBBandwidth ConditionModeFrequency(MHz)Antenna-6dBBandwidth(MHz)Limit-6dBBandwidth(MHz)Verdict NVNTBLE1M2402Ant10.67830.5Pass NVNTBLE1M2440Ant10.6720.5Pass NVNTBLE1M2480Ant10.70820.5Pass NVNTBLE2M2402Ant11.1450.5Pass NVNTBLE2M2440Ant11.1440.5Pass NVNTBLE2M2480Ant11.1440.5Pass ReportNo.:AB26030177FW01 10 / 25 TestGraphs -6dBBandwidthNVNTBLE1M2402MHzAnt1 -6dBBandwidthNVNTBLE1M2440MHzAnt1 ReportNo.:AB26030177FW01 11 / 25 -6dBBandwidthNVNTBLE1M2480MHzAnt1 -6dBBandwidthNVNTBLE2M2402MHzAnt1 ReportNo.:AB26030177FW01 12 / 25 -6dBBandwidthNVNTBLE2M2440MHzAnt1 -6dBBandwidthNVNTBLE2M2480MHzAnt1 ReportNo.:AB26030177FW01 13 / 25 OccupiedChannelBandwidth ConditionModeFrequency(MHz)Antenna99%OBW(MHz) NVNTBLE1M2402Ant11.0281 NVNTBLE1M2440Ant11.0425 NVNTBLE1M2480Ant11.0438 NVNTBLE2M2402Ant12.0567 NVNTBLE2M2440Ant12.0647 NVNTBLE2M2480Ant12.0487 ReportNo.:AB26030177FW01 14 / 25 TestGraphs OBWNVNTBLE1M2402MHzAnt1 OBWNVNTBLE1M2440MHzAnt1 ReportNo.:AB26030177FW01 15 / 25 OBWNVNTBLE1M2480MHzAnt1 OBWNVNTBLE2M2402MHzAnt1 ReportNo.:AB26030177FW01 16 / 25 OBWNVNTBLE2M2440MHzAnt1 OBWNVNTBLE2M2480MHzAnt1 ReportNo.:AB26030177FW01 17 / 25 MaximumPowerSpectralDensityLevel ConditionModeFrequency (MHz) AntennaConductedPSD (dBm/100kHz) ConductedPSD (dBm/3kHz) Duty Factor(dB) TotalPSD (dBm/3kHz) Limit (dBm/3kHz) Verdict NVNTBLE 1M 2402Ant14.45-10.780-10.788Pass NVNTBLE 1M 2440Ant14.32-10.910-10.918Pass NVNTBLE 1M 2480Ant14.23-110-118Pass NVNTBLE 2M 2402Ant13.94-11.290-11.298Pass NVNTBLE 2M 2440Ant13.74-11.490-11.498Pass NVNTBLE 2M 2480Ant13.6-11.630-11.638Pass ReportNo.:AB26030177FW01 18 / 25 TestGraphs PSDNVNTBLE1M2402MHzAnt1 PSDNVNTBLE1M2440MHzAnt1 ReportNo.:AB26030177FW01 19 / 25 PSDNVNTBLE1M2480MHzAnt1 PSDNVNTBLE2M2402MHzAnt1 ReportNo.:AB26030177FW01 20 / 25 PSDNVNTBLE2M2440MHzAnt1 PSDNVNTBLE2M2480MHzAnt1 ReportNo.:AB26030177FW01 21 / 25 BandEdge ConditionModeFrequency(MHz)AntennaMaxValue(dBc)Limit(dBc)Verdict NVNTBLE1M2402Ant1-40.48-20Pass NVNTBLE1M2480Ant1-47.39-20Pass NVNTBLE2M2402Ant1-31.54-20Pass NVNTBLE2M2480Ant1-45.41-20Pass ReportNo.:AB26030177FW01 22 / 25 TestGraphs BandEdgeNVNTBLE1M2402MHzAnt1Ref BandEdgeNVNTBLE1M2402MHzAnt1Emission ReportNo.:AB26030177FW01 23 / 25 BandEdgeNVNTBLE1M2480MHzAnt1Ref BandEdgeNVNTBLE1M2480MHzAnt1Emission ReportNo.:AB26030177FW01 24 / 25 BandEdgeNVNTBLE2M2402MHzAnt1Ref BandEdgeNVNTBLE2M2402MHzAnt1Emission ReportNo.:AB26030177FW01 25 / 25 BandEdgeNVNTBLE2M2480MHzAnt1Ref BandEdgeNVNTBLE2M2480MHzAnt1Emission

2.4GHz3216ChipAntenna:RANT3216F245C03 _ Application: WLAN,802.11b/g,Bluetooth,WLAN,etc... Features SMD,highreliability,ultraImpact,Omni-directional... PartnumberInformation RANT3216F245C03 (A)(B)(C)(D)(E)(F) ElectricalSpecification ThespecificationisdefinedonEVB. DimensionandTerminalConfiguration No.TerminalName 1Feeding/GNG 2GND/Feeding (A)ProductTypeChipAntenna (B)SizeCode 3.2x1.6mm( ± 0.2mm) (C)MaterialHighKmaterial (D)Frequency2.4~2.5GHz (E)FeedingmodePIFA&SingleFeeding (F)AntennatypeType=03 WorkingFrequencyRange2400~2500MHz Bandwidth120MHz(Min.) PeakGain2.7dBi(Typ.) Impedance50Ohm Returnloss10dB(Min) PolarizationLinear AzimuthBeamwidthOmni-directional OperationTemperature( °C )-40~85 °C ResistancetoSolderingHeats 10sec.(@280 °C ) TerminationNi/Au(Leadless) Dimension(mm) L 3.20 ± 0.20 W 1.60±0.20 T 0.45±0.20 咏成國際科技有限公司 RAINInternationalTechnologyCo.,Ltd tel:13530576606 . Room707,BuildingF,TonganZhichuangyuan,xixiangstreet,BaoanDistrict, Shenzhen. 2.4GHz3216ChipAntenna:RANT3216F245C03 _ 1 EvaluationBoardReference Dimension Unit:mm ElectricalCharacteristics ReturnLoss&Radiation ReturnLoss Frequency(MHz) S11(dB) 2400-10.50 2450-30.62 2500-11.47 Radiation 2400MHz2450MHz2500MHz Efficiency82.52%85.26%83.01% X Y Z 2.4GHz3216ChipAntenna:RANT3216F245C03 _ TapingSpecifications ReelandTapingSpecification ReelSpecification TYPESIZEABCD 32167”5K/Reel 9.0±0.5 60±213.5±0.5178±2 TappingSpecification PackagingTypeABWEFGHTψDP PaperType3216 1.90±0.2 0 3.50±0.2 0 8.0±0.2 0 1.75±0.1 0 3.5±0.054.0±0.102.0±0.050.75±0.1 0 1.50±0.1 0 4.0±0.1 2.4GHz3216ChipAntenna:RANT3216F245C03 _ ReliabilityTable TestItemProcedure Requirements CeramicType Remark (Reference) Electrical Characterization Fulfilltheelectrical specification UserSpec. Thermal Shock 1.Preconditioning: 50±10°C/1hr,thenkeepfor24±1hrsatroomtemp. 2.Initialmeasure:Spec:referInitialspec. 3.Rapidchangeoftemperaturetest: -30°Cto+85°C;100cycles; 15minutesatLowercategorytemperature; 15minutesatUppercategorytemperature. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 107 Temperature Cycling 1.Initialmeasure:Spec:referInitialspec. 2.100Cycles(-30°Cto+85°C),SoakMode=1(2Cycle/hours). 3.Measurementat24±2Hoursaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. JESD22 JA104 HighTemperature Exposure 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered;500hours@T=+85°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 LowTemperature Storage 1.Initialmeasure:Spec:referInitialspec. 2.Unpowered:500hours@T=-30°C. 3.Measurementat24±2hoursaftertest. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 108 Solderability (SMDBottomSide) Dippingmethod: a.Temperature:235±5°C b.Dippingtime:3±0.5s Thesoldershouldcover over95%ofthecritical areaofbottomside. IEC60384-21/22 4.10 SolderingHeat Resistance (RSH) Preheatingtemperature:150±10°C. Preheatingtime:1~2min. Soldertemperature:260±5°C. Dippingtime:5±0.5s NoVisibleDamage.IEC60384-21/22 4.10 Vibration5g'sfor20min.,12cycleseachof3orientations Note:Use8"X5"PCB.031"thick7securepointson,onelong sideand2securepointsatcornersofoppositesides.Parts mountedwithin2"fromanysecurepoint.Testfrom10-2000 Hz. NoVisibleDamage.MIL-STD-202 Method204 Mechanical Shock Threeshocksineachdirectionshallbeappliedalongthethree mutuallyperpendicularaxesofthetestspecimen(18shocks) Peakvalue:1,500g’s Duration:0.5ms Velocitychange:15.4ft/s Waveform:Half-sine NoVisibleDamage.MIL-STD-202 Method213 Humidity Bias 1.Humidity:85%R.H.,Temperature:85±2°C. 2.Time:500±24hours. 3.Measurementat24±2hrsaftertestcondition. NoVisibleDamage. Fulfilltheelectrical specification. MIL-STD-202 Method106 2.4GHz3216ChipAntenna:RANT3216F245C03 _ Board Flex (SMD) 1.Mountingmethod: IR-Reflow.PCBSize(L:100×W:40×T:1.6mm) 2.Applytheloadindirectionofthearrowuntilbendingreaches 2mm. NoVisibleDamage.AEC-Q200 005 AdhesionForceof1.8Kgfor60seconds.NoVisibleDamage Magnificationof20Xor greatermaybeemployed forinspectionofthe mechanicalintegrityofthe devicebodyterminalsand body/terminaljunction. AEC-Q200 006 Physical Dimension Anyapplicablemethodusingx10magnification,micrometers, calipers,gauges,contourprojectors,orothermeasuring equipment,capableofdeterminingtheactualspecimen dimensions. Inaccordancewith specification. JESD22 JB100 RevisionHistory RevisionDateContent 12019/03/01NewDatasheet 22020/02/22Add2Dradiationcharacteristic 32020/02/22Add2Dradiationcharacteristic

ReportNo.:AB26030177FW01 AiboStandardTechnology(Shenzhen)Co.,Ltd. 101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark,TianliaoCommunity,YutangStreet, GuangmingDistrict,ShenzhenCity,GuangdongProvince,China Tel.:+8675585250797E-mail:[email protected]:www.aibonorm.com FCCTESTREPORT ReportNo..............................................:AB26030177FW01 FCCID...................................................:2A9K2-ICARD08 Applicant................................................:ShenZhenRiShengHuaTechnologyCo.,Ltd. Address.................................................: Floor2,buildingE1qiangrongEastIndustrialZone,No.723, ZhoushiRoad,jiuweicommunity. Manufacturer......................................:ShenZhenRiShengHuaTechnologyCo.,Ltd. Address..............................................: Floor2,buildingE1qiangrongEastIndustrialZone,No.723, ZhoushiRoad,jiuweicommunity. ProductName.......................................:SmartCardFinder TradeMark............................................:/ TestModel.............................................:ICARD08 AdditionalModel(s)..............................:/ Standard ................................................ :FCC47CFRPart15SubpartC(Part15.247) DateofReceipt .................................... :2026.03.16 DateofTestDate.................................:2026.03.17-2026.03.23 DateofIssue........................................:2026.03.24 TestResult ............................................ :Pass Compiledby: (PrintedName+Signature) HuaijieLi Supervisedby: (PrintedName+Signature) DavidHuang Approvedby: (PrintedName+Signature) JayLiu TestingLaboratoryName...................:AiboStandardTechnology(Shenzhen)Co.,Ltd. Address ................................................. :101,BuildingB,TuoriNewEnergyIndustrialPark,High-techPark, TianliaoCommunity,YutangStreet,GuangmingDistrict,Shenzhen City,GuangdongProvince,China Thistestreportmaybeduplicatedcompletelyforlegalusewiththeapprovaloftheapplicant.Itshouldnot bereproducedexceptinfull,withoutthewrittenapprovalofourlaboratory.Theclientshouldnotuseitto claimproductendorsementbyAibo.Thetestresultsinthereportonlyapplytothetestedsample.Thetest reportshallbeinvalidwithoutallthesignaturesoftestingengineers,reviewerandapprover.Anyobjections mustberaisedtoAibowithin15dayssincethedatewhenthereportisreceived.Itwillnotbetakeninto considerationbeyondthislimit.Thetestreportmerelycorrespondtothetestsample. ReportNo.:AB26030177FW01 Page2of28 AiboStandardTechnology(Shenzhen)Co.,Ltd. FCCTESTREPORT TestResultPositive Thetestreportmerelycorrespondstothetestsample. Itisnotpermittedtocopyextractsofthesetestresultwithoutthewrittenpermissionofthetestlaboratory. EUT......................................... : SmartCardFinder TestModel.............................. : ICARD08 Applicant...............................:ShenZhenRiShengHuaTechnologyCo.,Ltd. Address...................................:Floor2,buildingE1qiangrongEastIndustrialZone,No.723,Zhoushi Road,jiuweicommunity. Manufacturer......................... : ShenZhenRiShengHuaTechnologyCo.,Ltd. Address...................................:Floor2,buildingE1qiangrongEastIndustrialZone,No.723,Zhoushi Road,jiuweicommunity. ReportNo.:AB26030177FW01 Page3of28 AiboStandardTechnology(Shenzhen)Co.,Ltd. REPORTVERSION VersionNo.IssueDateDescription 012026.03.24InitialIssue ReportNo.:AB26030177FW01 Page4of28 AiboStandardTechnology(Shenzhen)Co.,Ltd. TABLEOFCONTENTS 1.GENERALINFORMATION.........................................................................................................................................6 1.1.GENERALDESCRIPTIONOFEUT.....................................................................................................................................6 1.2.DESCRIPTIONOFSUPPORTEQUIPMENT........................................................................................................................6 1.3.DESCRIPTIONOFEXTERNALI/O.....................................................................................................................................6 1.4.GENERALDESCRIPTIONOFAPPLIEDSTANDARDS.........................................................................................................7 1.5.DESCRIPTIONOFTESTFACILITY.....................................................................................................................................7 1.6.MEASUREMENTUNCERTAINTY......................................................................................................................................8 1.7.ENVIRONMENTALCONDITIONS.....................................................................................................................................8 1.8.DESCRIPTIONOFTESTMODES.......................................................................................................................................9 2.SUMMARYOFTESTRESULT................................................................................................................................10 3.MEASUREMENTINSTRUMENTSLIST.................................................................................................................11 4.ANTENNAREQUIREMENT ......................................................................................................................................12 5.CONDUCTEDOUTPUTPOWER.............................................................................................................................13 5.1.LIMIT.............................................................................................................................................................................13 5.2.TESTSETUP...................................................................................................................................................................13 5.3.TESTPROCEDURE.....................................................................................................................................…

Text truncated - open the document above for the full version.

ReportNo.:AB26030177 Page1of3 AppendixATestPhotos RadiatedSpuriousEmissionTestView1 ReportNo.:AB26030177 Page2of3 RadiatedSpuriousEmissionTestView ReportNo.:AB26030177 Page3of3 RFTestView