2A9KG-M2Power Bank

Magnetic wireless power bank User Man ual Model Number：M2 Thank you for purchasing this product. Please carefully read the instruction before use. Product Overview Charging the iPhone 12 Series or Later 3.Wired charging Charging the Power Bank Spec IMPORTANT SAFETY INSTRUCTIONS ifica tions Model Num be rM2 Ce ll Ca pa city10000mAh 3.85V / 38.5Wh Type -C Input5V ⎓3A，9V⎓2A，12V⎓1.5A Type -C Out put5V ⎓3A，9V⎓2.22A，12V⎓1.6 7A USB-A Ou tput5V ⎓3A，9V⎓2A，12V⎓1.5A Wireless Out put5W / 7.5W / 10W / 15W MAX Use the Power Bank 1、Buttonoperation ① Press the power button once to turn on the power bank and start wireless charging or wired charging. Press the power button twice to turn it off. (Compatible with iPhone series mobile phones that support magnetic wireless charging) With the power bank turned on, simply align and attach the mobile phone to the wireless charging area of the power bank to initiate wireless charging. The green wireless charging indicator will light up, and the percentage displayed on the screen will show the current battery level. 1.To activate wireless charging, press the power button or place your device on the charger as illustrated below. It will be held in place magnetically. Use the included USB-C charging cable to connect your device to the power bank, and then you can charge your phone, tablet, or other devices. The LED display screen shows the current battery level. When using this product, basic precautions should always be followed, including the following: 1)Store the product in a cool, dry place. 2)Do not store the product in a hot or humid environment. 3)Using a power supply or charger not recommended or sold by the product manufacturer may pose a risk of fire or injury. 4)The operating temperature should be between 0°C to 40°C (32°F to 104°F). 5)Do not disassemble the product. For service or repair, take it to a qualified service professional. Incorrect reassembly may pose a risk of fire or injury. Plug one end of the USB-C charging cable into the USB-C port of the power bank, and then connect the other end to a charger to charge the power bank. During charging, the percentage on the display screen will flash, indicating the current battery level. Notes: 01. When the power bank is charging or fully charged, the LED display will remain on. 02. To ensure the normal service life of the battery, please use and charge the power bank at least once every three months. 2.The fold-out stand can be unfolded and used as a stand during wireless charging. Note： 1、If the wireless charging output is abnormal or a foreign object (FOD) is detected, the LED display screen will flash continuously for 25 seconds before stopping, and it will recover within 2 seconds after the object is removed. 2、If your power bank exceeds the temperature limit, the battery level indicator will turn off. Allow the power bank to cool down before using it again. 3、This wireless charger is not compatible with non-MagSafe phone cases, such as Otterbox Defender cases. ② Press and hold the power button for 3 seconds to activate the low- current mode (it will automatically turn off after 30 seconds of inactivity); the percentage on the display screen will flash continuously. Press and hold again for 3 seconds to deactivate the low-current mode and return to normal charging mode. 4、While wireless charging offers greater convenience than wired charging, it is limited by current technology, resulting in slower charging speeds compared to wired chargers. 5、High temperatures can reduce charging speed and limit power output, a phenomenon that affects all wireless chargers. It is recommended to charge your device in environments with temperatures below 25°C/77°F. 6、Both the protective phone case and the position of your device on the wireless charger can affect charging speed. The farther the device is placed from the center of the wireless charger, the slower the charging speed will be. 2.Magnetic wireless charging 6)If the product is not used for an extended period, you should charge and discharge it at least once every three months. 7)The product may become warm during charging. This is normal and should not cause concern. 8)Over several years, battery performance may naturally decline under normal conditions. 9)Do not dispose of the product in heat or fire. 10)Do not clean the product with harmful chemicals or detergents. 11)Misuse, dropping, or excessive force may damage the product. 12)When disposing of secondary cells or batteries, keep cells or batteries with different electrochemical systems separate from each other. 13)Be aware that a discharged battery may cause fire or smoke. Tape the terminals to insulate them. FCCWarningStatement:Changesormodificationstothisunitnotexpressly approvedbythepartyresponsibleforcompliancecouldvoidtheuser’s authoritytooperatetheequipment.Thisequipmenthasbeentestedandfound tocomplywiththelimitsforaClassBdigitaldevice,pursuanttoPart15ofthe FCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainst harmfulinterferenceinaresidentialinstallation.Thisequipmentgenerates, usesandcanradiateradiofrequencyenergyand,ifnotinstalledandusedin accordancewiththeinstructions,maycauseharmfulinterferencetoradio communications. However,thereisnoguaranteethatinterferencewillnotoccurinaparticular installation.Ifthisequipmentdoescauseharmfulinterferencetoradioor televisionreception,whichcanbedeterminedbyturningtheequipmentoffand on,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreof thefollowingmeasures: -Reorientorrelocatethereceivingantenna. -Increasetheseparationbetweentheequipmentandreceiver. - Connecttheequipmentintoanoutletonacircuitdifferentfromthatto whichthereceiverisconnected. - Consultthedealeroranexperiencedradio/TVtechnicianforhelp. ThisdevicecomplieswithPart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference, and(2)thisdevicemustacceptanyinterferencereceived,including interferencethatmaycauseundesiredoperation.…

Text truncated - open the document above for the full version.

ShenzhenMengzhengTechnologyCo.,Ltd. 2.911(d)(5)(i)EquipmentTypeAttestationv1.2 Section2.911(d)(5)(i)Certification–EquipmentType Companyname:ShenzhenMengzhengTechnologyCo.,Ltd. Address:401,28-3,GongkenglangIndustrialPark,XintianCommunity,GuanhuStreet,Longhua District,ShenzhenChina ProductName:PowerBank FCCID:2A9KG-M2 Model(s):M2,F2,W2,H2,J2,K2,S2 2.911(d)(5)(i)EquipmentType We,[ShenzhenMengzhengTechnologyCo.,Ltd.](“theapplicant”)certifythattheequipmentfor whichauthorizationissoughtthroughcertificationisnot:  Prohibitedfromreceivinganequipmentauthorizationpursuantto§2.903;oftheFCCrules.  Identifiedasanequipmenttypeinthe“CoveredList” NOTE1 Yourssincerely, Name:jadeyangDate:2024.8.27 TitleandCompanyname:Manager/ShenzhenMengzhengTechnologyCo.,Ltd. NOTE1 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenMengzhengTechnologyCo.,Ltd. 2.911(d)(5)(ii)ApplicantAttestationv1.3 Section2.911(d)(5)(ii)Certification–Applicant(CoveredList) Companyname:ShenzhenMengzhengTechnologyCo.,Ltd. Address:401,28-3,GongkenglangIndustrialPark,XintianCommunity,GuanhuStreet,Longhua District,ShenzhenChina ProductName:PowerBank FCCID:2A9KG-M2 Model(s):M2,F2,W2,H2,J2,K2,S2 2.911(d)(5)(ii)Applicantfiling We,[ShenzhenMengzhengTechnologyCo.,Ltd.](“theapplicant”)certifythat,asofthedateofthe filingoftheapplication,theapplicantisnotidentified NOTE1 onthe“CoveredList” NOTE2 ,established pursuantto§1.50002ofthischapter,asanentityproducingcoveredcommunicationsequipment. Yourssincerely, Name:jadeyangDate:2024.8.27 TitleandCompanyname:Manager/ShenzhenMengzhengTechnologyCo.,Ltd. NOTE1 Deleteoptionnotapplicabletothisapplication. NOTE2 “CoveredList”;istheListofEquipmentandServicesCoveredBySection2ofTheSecureNetworksAct,availableat https://www.fcc.gov/supplychain/coveredlist References; 1)986446D01CoveredEquipmentv01 https://apps.fcc.gov/oetcf/kdb/forms/FTSSearchResultPage.cfm?switch=P&id=325672 2)FederalRegisterdocument2022-28263publishedon02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-com munications-supply-chain-through-the

ShenzhenMengzhengTechnologyCo.,Ltd. AgentAuthorization Company:ShenzhenMengzhengTechnologyCo.,Ltd. Address:401,28-3,GongkenglangIndustrialPark,XintianCommunity,GuanhuStreet, LonghuaDistrict,ShenzhenChina ProductName:PowerBank ModelNumber(s):M2,F2,W2,H2,J2,K2,S2 ProductDescription:PowerBank WeauthorizeMiCOMLabsInc.,575BoulderCourt,Pleasanton,California94566,USA, toactonourbehalfonallmattersconcerningthecertificationofabovenamed equipment. WedeclarethatMiCOMLabsInc.isallowedtoforwardallinformationrelatedtothe approvalandcertificationofequipmenttotheregulatoryagenciesasrequiredandto discussanyissuesconcerningtheapprovalapplication.Anyandallactscarriedoutby MiCOMLabsonourbehalfshallhavethesameeffectasactsofourown. Signature:Date:2024.8.27 Name:jadeyang Title:Manager Company:ShenzhenMengzhengTechnologyCo.,Ltd.

ShenzhenMengzhengTechnologyCo.,Ltd. ModelDifference Productdescription:PowerBank Modelname:M2 F2,W2,H2,J2,K2,S2 TradeName:N/A AllthemodelarethesamecircuitandRFmodule,onlythemodelnameisdifferent. Regards Sincerely Client’ssignature: Client’sname/title: jadeyang/Manager Contactinformation/address:401,28-3,GongkenglangIndustrialPark,Xintian Community,GuanhuStreet,LonghuaDistrict,Shenzhen

ShenzhenMengzhengTechnologyCo.,Ltd. OfficeofEngineeringTechnology FederalCommunicationsCommission 7435OaklandMillsRoad Columbia,MD21046 USA Date:2024.8.27 Subject;RequestforConfidentiality FCCID:2A9KG-M2 ToWhomItMayConcern, PursuanttotheprovisionsoftheCommission’srulesTitle47Sections§0.457and§0.459,we arerequestingtheCommissiontowithholdthefollowingattachment(s)asconfidential documentsfrompublicdisclosureindefinitely. Thesedocumentscontaindetailedsystemandequipmentdescriptionsandareconsideredas proprietaryinformationinoperationoftheequipment.Thepublicdisclosureofthesedocuments mightbeharmfultoourcompanyandwouldgivecompetitorsanunfairadvantageinthemarket. SchematicDiagram BlockDiagram PartsList OperationalDescription Tune-upProcedure Inadditionaltoabovementioneddocuments,inordertocomplywiththemarketingregulations inTitle47CFR§2.803andtheimportationrulesinTitle47CFR§2.1204,whileensuringthat businesssensitiveinformationremainsconfidentialuntiltheactualmarketingofnewly authorizeddevices,werequestShortTermConfidentialityofthefollowingattachment(s); ExternalPhotos TestSetupPhotos InternalPhotos UserManual For45days,pursuanttoPublicNoticeDA04-1705. OR For180dayspursuanttoKDB726920D01. Itisourunderstandingthatallmeasurementtestreports,FCCIDlabelformatand correspondenceduringthecertificationreviewprocesscannotbegrantedasconfidential documentsandthisinformationwillbeavailableforpublicreviewoncethegrantofequipment authorizationisissued. Sincerely, Signature: Name:jadeyang Title:Manager

EUTPHOTO(ExternalPhotos) TestMode:M2 ※※※※※ENDOFREPORT※※※※※

Labelandlabellocation FCCIDLABEL: High:1cm Wide:2cm LabelLocation: PowerBank FCCID:2A9KG-M2

EUTPHOTO(InternalPhotos) TestMode:M2 ※※※※※ENDOFREPORT※※※※※ ANT1

1 RFExposureEvaluation FCCID:2A9KG-M2 ProductName:PowerBank ProductModelNo.:M2 TestAuxiliary:AC/DCAdapter,Phone TestAuxiliaryModelNo.:HW-200200CP1,iPhone12 OperationFrequency:115kHz-205kHz ModulationType:ASK AntennaType:LoopCoilAntenna PowerSupply: Type-CInput:5V3A,9V2A,12V1.5A Type-COutput:5V3A,9V2.22A,12V1.67A USB-AOutput:5V3A,9V2A,12V1.5A WirelessOutput:5W/7.5W/10W/15W BatteryCapacity:10000mAh(DC3.85V/38.5Wh) TransmittingModeKeeptheEUTincontinuouslywirelesschargingmode a.EUTmodeofadapterinput+wirelesschargeoutput: TestModes:TestCoilDescription: Mode1 ANT1 AC/DCAdapter+EUT+Phone(BatteryStatus:<1%) Mode2AC/DCAdapter+EUT+Phone(BatteryStatus:50%) Mode3AC/DCAdapter+EUT+Phone(BatteryStatus:>98%) b.EUTmodeofwirelesschargeoutput: TestModes:TestCoilDescription: Mode1a ANT1 EUT+Phone(BatteryStatus:<1%) Mode2aEUT+Phone(BatteryStatus:50%) Mode3aEUT+Phone(BatteryStatus:>98%) Note:Bothaandbweretested,andonlythetestdataforbwasrecorded. 2 TABLEOFCONTENTS RFExposureEvaluation......................................................................................................1 1MeasuringStandard.........................................................................................................3 1.1KDB680106D01WirelessPowerTransferv04.....................................................3 1.2MeasurementUncertainty......................................................................................3 2Requirements...................................................................................................................3 2.1Accordingtotheitem5.2ofKDB680106D01v04:................................................3 3MethodOfMeasurement..................................................................................................4 3.1ApplicableStandard...............................................................................................4 3.2BlockdiagramofTestSetup..................................................................................4 3.3Formobileexposureconditions:.............................................................................4 3.4Forportableexposureconditions:..........................................................................4 3.5LimitsforMaximumPermissibleExposure(MPE):.................................................5 3.6TestProcedure:......................................................................................................5 6TestSet-upPhoto...........................................................................................................11 Testdistance:20cm...........................................................................................................11 Testdistance:6cm.............................................................................................................14 3 1MeasuringStandard 1.1KDB680106D01WirelessPowerTransferv04 1.2MeasurementUncertainty Thereporteduncertaintyofmeasurementy±U,whereexpendeduncertaintyUisbasedonastandard uncertaintymultipliedbyacoveragefactorofk=2,providingalevelofconfidenceofapproximately95%. No.ItemUncertainly 1H-filed ±0.93dB 2E-filed±0.51dB 2Requirements 2.1Accordingtotheitem5.2ofKDB680106D01v04: Inductivewirelesspowertransferapplicationsthatmeetallofthefollowingrequirementsareexcludedfrom submittinganRFexposureevaluation. a)Thepowertransferfrequencyisbelow1MHz. Yes.Thedeviceoperatesinthefrequencyfrom115kHzto205kHz. b)Theoutputpowerfromeachtransmittingelement(e.g.,coil)islessthanorequalto15watts. Yes,Themaximumoutputpoweroftheprimarycoilis15watts. c)Aclientdeviceprovidingthemaximumpermittedloadisplacedinphysicalcontactwiththetransmitter (i.e.,thesurfacesofthetransmitterandclientdeviceenclosuresneedtobeinphysicalcontact). Yes.Clientdeviceisplaceddirectlyincontactwiththetransmitter. d)Only§2.1091-Mobileexposureconditionsapply(i.e.,thisprovisiondoesnotcover§2.1093-Portable exposureconditions). NO.TheEUTisaportablewirelesscharger. e)TheE-fieldandH-fieldstrengths,atandbeyond20cmsurroundingthedevicesurface,aredemonstrated tobelessthan50%oftheapplicableMPElimit,perKDB447498,Table1.Thesemeasurementsshallbe takenalongtheprincipalaxesofthedevice,withoneaxisorientedalongthedirectionoftheestimated maximumfieldstrength,andforthreepointsperaxisoruntila1/d(inversedistancefromtheemitterstructure) fieldstrengthdecayisobserved.Symmetryconsiderationsmaybeusedfortestreductionpurposes. Thedeviceshallbeoperatedindocumentedworst-casecompliancescenarios(i.e.,theonesthatleadtothe maximumfieldcomponents),andwhilealltheradiatingstructures Yes.TheEUTcoilisevaluatedatmaximumoutputpowerandthetestresultsarelessthan50%ofthelimit. f)Forsystemswithmorethanoneradiatingstructure,theconditionsspecifiedin(5)mustbemetwhen thesystemisfullyloaded(i.e.,clientsabsorbingmaximumpoweravailable),andwithalltheradiating structuresoperatingatmaximumpoweratthesametime,asperdesignconditions.Ifthedesignallowsone ormoreradiatingstructurestobepoweredatahigherlevelwhileotherradiatingstructuresarenotpowered, thenthosecasesmustbetestedaswell. NO,TheEUThasonecoil. 4 3MethodOfMeasurement 3.1ApplicableStandard AccordingtoS1.1307(b)(1),systemsoperatingundertheprovisionsofthissectionshallbeoperatedina mannerthatensuresthatthepublicisnotexposedtoradiofrequencyenergylevelinexcessofthe Commission'sguidelines.Accordingto§1.1310and§2.1093RFexposureiscalculated.According KDB680106D01WirelessPowerTransferv04. 3.2BlockdiagramofTestSetup Note:Measurementsshouldbemadefromallsidesandthetopoftheprimary/clientpair,withthe20 cm-0cmmeasuredfromthecenterofthetop,and20cm-0cmmeasuredfromthecenteroftherest. 3.3Formobileexposureconditions: a.TheRFexposuretestwasperformedinanechoicchamber b.EandH-fieldmeasurementsshouldbemadewiththecenteroftheprobeatadistanceof15cm surroundingtheEUTand20cmabovethetopsurfaceoftheprimarv/clientpair c.Thehighestemissionlevelwasrecordedandcomparedwithlimit d.TheEUTwasmeasuredaccordingtothedictatesofKDB680106D01v04 3.4Forportableexposureconditions: a.TheRFexposuretestwasperformedinanechoicchamber b.EandH-fieldmeasurementsshould…

Text truncated - open the document above for the full version.

1/7 ShenzhenMengzhengTechnologyCo.,Ltd APPROVALSHEET product description PartDescription Manufacturer:DongguanJereisi TechnologyCo.,Ltd.Vendo Productname:Singlecoilofmobile phone ProductName materialcode: PartNo. Specification,model/version:G43-0.8-6.5UH-32MM Description Projectmodel: Project Sampleuse ☑structuresample □Theoldsampleis invalid □Colorsample(referencecodeforstructuredetection:) Structuresignature: appendix: Attachments ☑sample Sample ☑Reliabilitytest report ReliabilityReport ☑FAIfull-sizereport FAIReport ☑mannerofpacking PackingContent ☑specification Spec ☑Engineeringdrawing surface Drawing ☑Materialcertificate MaterialVerificationSheet □safetyregulations report SafetyReport □SGSreport SGSReport Suppliersigned Vendor Formulation:LuLin Design Review:DengXianggui Check Approval:LuRusheng Approval Technical confirmation bar Technology Check structure: MD Industrial/packagingmaterialdesign: ID hardware: HW projectmanager: PM Development quality signedPM approval ☑admit Approved □Conditional admissionofthe ConditionApproved □Temporary admissionofthe TemporaryApproved □disallow Reject Theconditionneedstobemet: ______________________________________ Limitedprocurementof__________PcsRDquality: DesignQuality Distribution Department: Distribute ☑supplier ☑researchand development ☑quality □cultural control □ engineering □client ☑outsourcingfactory □Other________ 2/7 I.Catalogue: 1.Thecovercoverof the.............................................................. .............Page1-1 2. Catalogue........................................................ ...................Page2-2 3.Product Figure........................................................... .............Page#3-3 4.Size drawing.......................................................... ..............Page4-4 5.Product parameters:...................................................... ...............Page5-5 6.Technical requirements..................................................... .............Page5-5 7.Electricalactivity parameter........................................................ .............Page5-5 8.Packaging for.............................................................. .............Page6-6 9.Material list............................................................. ........Page7-7 3/7 Ii.Productdrawingsurface: 4/7 3,planestructurediagram:Unit:MM A B C D E F G H I J 5/7 4.Productparameters: foot position Line diameter numberof turns remarks 1-2 0.08*105P 10 silk-covered wire V.Technicalrequirements: 1.Fixthelineheadandtailtopreventlinelooseningandbreaking 2.Accordingtothecustomerrequirements,thelongwireshear,tin, tindepthof3±1MM 3.Pointtheappropriatewhiteglueonthemagneticchip,stickthe coil,andensurethattheproductsurfaceiscleanandtidyinthe process 4.Themagneticsheetusedisahardsubstrate,withnodamage 5.Add42mmdouble-sidedadhesive tothebackofthefinishedproduct, andtherearpackaging.6.Additional process(accordingtocustomer requirements):pack3MMhigh- temperatureadhesivetape Vi.Electricalactivityparameters: 1.Intancevalue,Qvalue: PIN1-2=6.3±0.3UH TheaboveinductancevaluetakesQuanhua1062Ainstrumentand10 KHZ/0.3Vrmsasthestandardorequivalentinstrument. 6/7 Vii.Packaging: Figure2:Unifieddirectionlineisneatly dischargedintotheplate, Figure1:Single-layerfoamtray 1box-packof270PCS Figure3:Putinthepackingboxandplace eachbox 4layer Figure4:Sealbox,sealboxwithtransparent glue Figure5:PackagingboxlabelFigure6:Materialstacked,neatandtidy,thelabelis convenienttofindmaterials 7/7 Viii.ListofMaterials: orde r numb er name material quality supplier remarks 1 silk- covered wire 0.08*105Pwire wrapwire Vihanor equivalent 2 magnetic sheet G43*0.8hard substrate Tiantongor equivalent 3 tin High temperature environmental protection Thousand islandsor equivalent 4 alban BY882 Treasure monthor equivalent 5 double faced adhesive tape 42mm Honghuior equivalent 6 adhesive tape High-temperature resistanceof 280°C-3MM Philosophgrou por equivalent Additional processes , according tothe customer' s requireme nts

ProjectNo.:ZKT-2408159992E Page 1 of 28 FCCTESTREPORT FCCID:2A9KG-M2 ReportNumber. .................................. :ZKT-2408159992E DateofTest ....................................................... : Aug.15,2024toAug.22,2024 Dateofissue.........................................: Aug.22,2024 Totalnumberofpages..........................28 TestResult .......................................... : PASS TestingLaboratory............................: ShenzhenZKTTechnologyCo.,Ltd. Address ............................................... : 1/F,No.101,BuildingB,No.6,TangweiCommunityIndustrial Avenue,FuhaiStreet,Bao'anDistrict,Shenzhen,China Applicant'sname.............................: ShenzhenMengzhengTechnologyCo.,Ltd. Address...............................................: 401,28-3,GongkenglangIndustrialPark,XintianCommunity, GuanhuStreet,LonghuaDistrict,Shenzhen Manufacturer'sname......................: ShenzhenMengzhengTechnologyCo.,Ltd. Address ............................................... : 401,28-3,GongkenglangIndustrialPark,XintianCommunity, GuanhuStreet,LonghuaDistrict,Shenzhen Testspecification: Standard................................................:FCCCFRTitle47Part15SubpartC Testprocedure.....................................: / Non-standardtestmethod ................ :N/A TestReportFormNo. ....................... : TRF-EL-107_V0 TestReportForm(s)Originator.....: ZKTTesting MasterTRF........................................: Dated:2020-01-06 ThisdevicedescribedabovehasbeentestedbyZKT,andthetestresultsshowthattheequipmentunder test(EUT)isincompliancewiththeFCCrequirements.Anditisapplicableonlytothetestedsample identifiedinthereport. Thisreportshallnotbereproducedexceptinfull,withoutthewrittenapprovalofZKT,thisdocumentmay bealteredorrevisedbyZKT,personalonly,andshallbenotedintherevisionofthedocument. Productname.....................................: PowerBank Trademark ........................................... : N/A Model/Typereference.........................: M2 F2,W2,H2,J2,K2,S2 Ratings .................................................. : Type-CInput:5V3A,9V2A,12V1.5A Type-COutput:5V3A,9V2.22A,12V1.67A USB-AOutput:5V3A,9V2A,12V1.5A WirelessOutput:5W/7.5W/10W/15W BatteryCapacity:10000mAh(DC3.85V/38.5Wh) ProjectNo.:ZKT-2408159992E Page 2 of 28 Testingprocedureandtestinglocation: TestingLaboratory ....................................... :ShenzhenZKTTechnologyCo.,Ltd. Address ............................................................ :1/F,No.101,BuildingB,No.6,TangweiCommunity IndustrialAvenue,FuhaiStreet,Bao'anDistrict, Shenzhen,China JimLiu Testedby(name+signature).......................: JacksonFang Reviewer(name+signature).......................: LakeXie Approved(name+signature) ....................... : ProjectNo.:ZKT-2408159992E Page 3 of 28 TABLEOFCONTENTS 1.VERSION..................................................................................................................................................4 2.TESTSUMMARY......................................................................................................................................5 2.1TESTFACILITY..................................................................................................................................6 2.2MEASUREMENTUNCERTAINTY.....................................................................................................6 3.GENERALINFORMATION......................................................................................................................7 3.1GENERALDESCRIPTIONOFEUT...................................................................................................7 3.2TESTMODE.......................................................................................................................................8 3.3BLOCKDIAGRAMOFEUTCONFIGURATION................................................................................9 3.4TESTCONDITIONS.........................................................................................................................10 3.5DESCRIPTIONOFSUPPORTUNITS(CONDUCTEDMODE)......................................................10 3.6EQUIPMENTSLISTFORALLTESTITEMS...................................................................................11 4.CONDUCTEDEMISSIONTEST............................................................................................................13 4.1CONDUCTEDEMISSIONMEASUREMENT...................................................................................13 4.1.1POWERLINECONDUCTEDEMISSIONLimits...........................................................................13 4.1.2TESTPROCEDURE......................................................................................................................13 4.1.3DEVIATIONFROMTESTSTANDARD.........................................................................................13 4.1.4TESTSETUP.................................................................................................................................14 4.1.5EUTOPERATINGCONDITIONS..................................................................................................14 4.1.6TESTRESULT...............................................................................................................................15 5.RADIATEDEMISSIONMEASUREMENT..............................................................................................17 5.1RADIATEDEMISSIONLIMITS........................................................................................................17 5.2ANECHOICCHAMBERTESTSETUPDIAGRAM...........................................................................18 5.3TESTPROCEDURE.........................................................................................................................18 5.4DEVIATIONFROMTESTSTANDARD............................................................................................18 5.5TESTRESULT.................…

Text truncated - open the document above for the full version.

EUTTESTPHOTO TestMode:M2 A: B: