2A9MRSI-B260Mini PC

User Manual SI-B260 Made in China FCC Warning This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any inte rference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Ervice Assurance Thank you for purchasing this product. You can enjoy one-year free space parts and manual service assurance provided by our company. Service support Email:[email protected] The following conditions lead to the need for our company to provide services, and the maintenance fees will be charged as appropriate: .Failure to perform proper operations according to the user manual or instructions. .Man-made damage, computer viruses, dampness, improper software installation or self-disassembly, etc. .Fire, flood, wind, earthquake and other irresistible forces. .Abrasive wear caused by accessories, consumables and natural use. .If we need to re-install software or adjust computer setting on our behalf, we will charge fees as appropriate. .Our company provides warranty for the damaged or dirty logo which may result in un-recognizability. Please backup your personal data before sending the product to repair. Product Interface Description 1, HD Port 2,DP Port 3,Power Button 4, USB3.0 5, Type-C Power Input 6,LAN 7,Earphone Instructions 1. Connect the device with the display device (such as TV, screen, projector, etc.) via HD line, and select the “video input source” of the display device to the connected HD input channel. 2. DC power supply: Connect the DC interface of the power cord of the accessories to the device and insert the other end directly into the socket. 3. Use the device by connecting it with a wired or wireless keyboard and mouse via USB port. 4. Press the power button to start the system. Packing List: 1. Computer Box *1 2. User Manual *1 3. Power Adapter *1 4. HDMI Wire * 1 5. Rack Accessories *1 Note 1. This Low-power RF motor is a certified and qualified product. Companies, businesses or individuals may not change the frequency, enhance the power or change the characteristics and functions of the original design without permission. 2. Low-frequency RF motors should not affect flight safety and interface with legitimate communication when they are used. When interference is found, they should be stopped using immediately and be improved to no interference before they can continue to be used. Legitimate communication refers to wireless communication in the work prescribed by law. Low-frequency RF motor must be able to tolerate the interference of legitimate communication or electromagnetic radiation motor equipment for industrial, scientific and medical purposes. 3. This product contains miniature batteries for mainboard CMOS, which can’t be replaced by consumers themselves. It may be dangerous if consumer replace incorrect types of batteries by themselves. Please properly handle the battery replacement. Attention 1. This product is suitable for places below 3000 meters above sea level, this product is only suitable for non-tropical areas. 2. After abnormal withdrawal or accidental power failure of the mini pc system, the hard disk scanning should be carried out as soon as possible to repair the errors in time. 3. If you do not use the device for a long time, Please unplug the power adapter. 4. The ideal working temperature of the device is 10-35 degrees, and the relative humidity is 30-80%. 5. The device should not be turn on or off frequently. 6. Don’t get water, food and other fluids onto the device, and don’t pull the data and power lines with force. 7. Avoid direct exposure of strong light to the device, and do not put it near the strong magnetic field SI-B260 MINIPC ▼ English

Covered Equipment Identification Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows: We, applicant Company Name: Shenzhen Simo Innovation Technology Co., Ltd. Address: 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Phone: 15986749272 certify that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing “covered” equipment. FCC ID: 2A9MRSI-B260 If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-05-06 Name / Title: xiaona Yue / Manager Company: Shenzhen Simo Innovation Technology Co., Ltd. Address: 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Phone: 15986749272 Fax: / E-Mail: [email protected]

Covered Equipment Attestation Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Section 2.911(d)(5)(i)-(ii) of the Commission’s Rules (47 C.F.R.) we attest as follows for the product listed below: FCC ID Model name 2A9MRSI-B260 SI-B260 We, applicant Company Name: Shenzhen Simo Innovation Technology Co., Ltd. Address: 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Phone: 15986749272 certify that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-05-06 Name / Title: xiaona Yue / Manager Company: Shenzhen Simo Innovation Technology Co., Ltd. Address: 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Phone: 15986749272 Fax: / E-Mail: [email protected]

Confidentiality Request Letter For Certification Service in the USA Federal Communication Commission Equipment Authorization Division, Application Processing Branch 7435 Oakland Mills Road Columbia, MD 21048 To whom it may concern Pursuant to Paragraphs §0.457 and 0.459 of the Commission’s Rules (47 C.F.R.) and Section §552(b)(4) of the Freedom of Information Act, we request confidentiality for the documentation of the following products: FCC ID Model name 2A9MRSI-B260 SI-B260 For the products listed above, we request permanent confidentiality for all applicable exhibits as there are:  the Operational Description  the Block Diagram  the Schematics The above listed exhibits contain trade secrets and proprietary information that could be of benefit to our competitors. If you have any questions, please feel free to contact us at the address shown below. Sincerely, Signature Date:2023-05-06 Name / Title: xiaona Yue / Manager Company: Shenzhen Simo Innovation Technology Co., Ltd. Address: 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Phone: 15986749272 Fax: / E-Mail: [email protected]

FCC ID: 2A9MRSI-B260 Fig. 1 Fig. 2 FCC ID: 2A9MRSI-B260 Fig. 3 Fig. 4 FCC ID: 2A9MRSI-B260 Fig. 5 Fig. 6 FCC ID: 2A9MRSI-B260 Fig. 7 Fig. 8

_____________________________________________________________________________________________________ LABEL AND LOCATION (Size: L3.45cm x 2.95cm) Label Location

FCC ID: 2A9MRSI-B260 Fig. 1 Fig. 2 FCC ID: 2A9MRSI-B260 Fig. 3 Fig. 4 BT&WLAN Antenna 1 WLAN Antenna 2 FCC ID: 2A9MRSI-B260 Fig. 5 Fig. 6 FCC ID: 2A9MRSI-B260 Fig. 7 Fig. 8 FCC ID: 2A9MRSI-B260 Fig. 9 Fig. 10 FCC ID: 2A9MRSI-B260 Fig. 11 Fig. 12 FCC ID: 2A9MRSI-B260 Fig. 13 Fig. 14 FCC ID: 2A9MRSI-B260 Fig. 15

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong RF Exposure evaluation Report Reference No...................... : FCC ID. ............................................ : GTS20230321014-1-5 2A9MRSI-B260 Compiled by ( position+printed name+signature) . : File administrators Peter Xiao Supervised by ( position+printed name+signature) . : Test Engineer Jenny Zeng Approved by ( position+printed name+signature) . : Manager Jason Hu Date of issue .................................... : Apr. 28, 2023 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong Applicant’s name ............................ : Shenzhen Simo Innovation Technology Co., Ltd. Address ............................................ : 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Test specification ........................... : Standard ........................................... : 47CFR §1.1310 Basis and purpose 47CFR §2.1091 Radiofrequency radiation exposure evaluation: mobile devices KDB447498 D01 General RF Exposure Guidance v06 TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ...................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Mini PC Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Simo Innovation Technology Co., Ltd. Model/Type reference ...................... : SI-B260 Listed Models .................................. : N/A Modulation Type ............................... : IEEE 802.11a /802.11b/802.11g/802.11n/802.11ac/802.11ax GFSK, π/4-DQPSK, 8-DPSK Operation Frequency........................ : From 2412MHz to 2462MHz, 5180MHz to 5240MHz, 5745MHz to 5825MHz, 2402MHz to 2480MHz Hardware Version ............................ : MX-ANB02_MB_V200 Software Version .............................. : ANB02_SMW Rating ............................................... : DC 12.0V/3.0A by Adapter Result ............................................... : PASS Report No.: GTS20230321014-1-5 Page 2 of 21 T E S T R E P O R T Test Report No. : GTS20230321014-1-5 Apr. 28, 2023 ______________________________________________________________________________________________ Date of issue Equipment under Test : Mini PC Model /Type : SI-B260 Listed model : N/A Applicant : Shenzhen Simo Innovation Technology Co., Ltd. Address : 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Manufacturer : Shenzhen Simo Innovation Technology Co., Ltd. Address : 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20230321014-1-5 Page 3 of 21 Contents 1. SUMMARY .................................................................................................................................................... 4 1.1 EUT CONFIGURATION .................................................................................................................................... 4 1.2 PRODUCT DESCRIPTION ................................................................................................................................ 4 2. TEST ENVIRONMENT .................................................................................................................................. 4 2.1 ADDRESS OF THE TEST LABORATORY .............................................................................................................. 5 2.2 TEST FACILITY ............................................................................................................................................... 5 2.3 ENVIRONMENTAL CONDITIONS ........................................................................................................................ 5 2.4 STATEMENT OF THE MEASUREMENT UNCERTAINTY .......................................................................................... 5 3. METHOD OF MEASUREMENT ................................................................................................................... 6 3.1 APPLICABLE STANDARD ................................................................................................................................. 6 3.2 REQUIREMENT .............................................................................................................................................. 6 3.3 LIMIT ............................................................................................................................................................. 6 3.4 MPE CALCULATION METHOD ......................................................................................................................... 7 3.5 ANTENNA INFORMATION ...........................................................................................................................…

Text truncated - open the document above for the full version.

The Holy bond Electronics Co., Ltd. Antenna Test Report Customer: 茂现 Project: JB02 Product: WIFI Antenna—FPC Report date: 2022.7.15 Prepared by : 刘才亮 Checked by : Eason Huang Approved by : 深圳市亿圣邦科技有限公司 深圳市亿圣邦科技有限公司 1 Purpose This report is to measure the performance of SLK for Master Antenna on 茂现. All measure data are showed below. Content 1. Product Overview 2.Test Result 2.1 WIFI Antenna VSWR/S11 2.2 Antenna Parameters 2.3 WIFI Antenna TRP/TIS 2.4 WIFI Antenna Gain/Efficienc/3D DATE 2.5 WIFI Antenna Throughput 3. Conclusions 深圳市亿圣邦科技有限公司 2 1. Product Overview 深圳市亿圣邦科技有限公司 3 2. Test Result 2.1 WIFI Antenna VSWR/S11 深圳市亿圣邦科技有限公司 4 MAIN 2. Test Result 2.1 WIFI Antenna VSWR/S11 深圳市亿圣邦科技有限公司 5 AUX 2. Test Result 2.2 Antenna Parameters 深圳市亿圣邦科技有限公司 6 深圳市亿圣邦科技有限公司 7 2. Test Result 2.3 WIFI Antenna TRP/TIS WIFI CH功率(54M) 灵敏度 (54M) 802.11a 3613.39-67.67 14912.69-66.29 16512.73-67.51 WIFI CH功率(11M) 灵敏度 (11M) 802.11b 18.64-74.72 68.51-76.37 118.89-77.33 WIFI CH功率(54M) 灵敏度 (54M) 802.11g 19.85-63.94 610.34-63.79 1110.64-64.57 WIFI CH功率(MCS7) 灵敏度 (MCS7) 802.11n 18.49-64.37 68.76-63.71 118.41-63.42 深圳市亿圣邦科技有限公司 8 2. Test Result 2.4 WIFI Antenna Gain/Efficiency/3D DATE 深圳市亿圣邦科技有限公司 10 2. Test Result 2.5 WIFI Antenna Throughput 测试环境：无障碍环境下，距离路由器10 M；上传：16.2 M，(用外置天线 上传数据无明显提升）;下载：128 M； 2.4G上传2.4G下载 深圳市亿圣邦科技有限公司 11 2. Test Result 2.5 WIFI Antenna Throughput 测试环境：无障碍环境下，距离路由器10M；上传：341M，下载：416M； 5.8G上传5.8G下载 3. Conclusions 深圳市亿圣邦科技有限公司 12 Thank you

FCCID: 2A9MRSI-B260 1 Case No. : GTS20230321014-1-1 Ambient Condition: 23 °C, 49 %RH, Atmos100.1Kpa, Test Date: 2023.4.24 Test Engineer: Jenny zeng Appendix A.1: 20dB Emission Bandwidth Test Result TestMode Antenna Frequency[MHz] 20db EBW[MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.870 2401.553 2402.423 --- --- 2441 0.861 2440.550 2441.411 --- --- 2480 0.858 2479.571 2480.429 --- --- 2DH1 Ant1 2402 1.449 2401.262 2402.711 --- --- 2441 1.416 2440.283 2441.699 --- --- 2480 1.413 2479.292 2480.705 --- --- 3DH1 Ant1 2402 1.443 2401.274 2402.717 --- --- 2441 1.473 2440.262 2441.735 --- --- 2480 1.413 2479.268 2480.681 --- --- FCCID: 2A9MRSI-B260 2 Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 FCCID: 2A9MRSI-B260 3 DH1_Ant1_2480 2DH1_Ant1_2402 FCCID: 2A9MRSI-B260 4 2DH1_Ant1_2441 2DH1_Ant1_2480 3DH1_Ant1_2402 FCCID: 2A9MRSI-B260 5 3DH1_Ant1_2441 3DH1_Ant1_2480 FCCID: 2A9MRSI-B260 6 Appendix A.2: Occupied Channel Bandwidth Test Result TestMode Antenna Frequency[MHz] OCB [MHz] FL[MHz] FH[MHz] Limit[MHz] Verdict DH1 Ant1 2402 0.83346 2401.576 2402.410 --- --- 2441 0.85322 2440.575 2441.428 --- --- 2480 0.84761 2479.578 2480.426 --- --- 2DH1 Ant1 2402 1.3399 2401.329 2402.669 --- --- 2441 1.3396 2440.328 2441.667 --- --- 2480 1.3437 2479.322 2480.666 --- --- 3DH1 Ant1 2402 1.3374 2401.332 2402.670 --- --- 2441 1.3329 2440.329 2441.662 --- --- 2480 1.3334 2479.324 2480.657 --- --- FCCID: 2A9MRSI-B260 7 Test Graphs DH1_Ant1_2402 DH1_Ant1_2441 FCCID: 2A9MRSI-B260 8 DH1_Ant1_2480 2DH1_Ant1_2402 FCCID: 2A9MRSI-B260 9 2DH1_Ant1_2441 2DH1_Ant1_2480 3DH1_Ant1_2402 FCCID: 2A9MRSI-B260 10 3DH1_Ant1_2441 3DH1_Ant1_2480 FCCID: 2A9MRSI-B260 11 Appendix A.3: Maximum conducted output power Test Result Peak Test Mode Antenna Frequency[MHz] Conducted Peak Powert[dBm] Conducted Limit[dBm] Verdict DH1 Ant1 2402 8.71 ≤20.97 PASS 2441 9.83 ≤20.97 PASS 2480 10.37 ≤20.97 PASS 2DH1 Ant1 2402 6.9 ≤20.97 PASS 2441 8.01 ≤20.97 PASS 2480 8.04 ≤20.97 PASS 3DH1 Ant1 2402 6.99 ≤20.97 PASS 2441 8.13 ≤20.97 PASS 2480 8.21 ≤20.97 PASS FCCID: 2A9MRSI-B260 12 Appendix A.4: Carrier frequency separation Test Result TestMode Antenna Frequency[MHz] Result[MHz] Limit[MHz] Verdict DH1 Ant1 Hop_2402 0.852 ≥0.580 PASS Hop_2441 0.996 ≥0.580 PASS Hop_2480 0.996 ≥0.580 PASS 2DH1 Ant1 Hop_2402 1.16 ≥0.966 PASS Hop_2441 1.158 ≥0.966 PASS Hop_2480 1.164 ≥0.966 PASS 3DH1 Ant1 Hop_2402 1.008 ≥0.982 PASS Hop_2441 1.006 ≥0.982 PASS Hop_2480 1.012 ≥0.982 PASS FCCID: 2A9MRSI-B260 13 Test Graphs DH1_Ant1_Hop_2402 DH1_Ant1_Hop_2441 FCCID: 2A9MRSI-B260 14 DH1_Ant1_Hop_2480 2DH1_Ant1_Hop_2402 FCCID: 2A9MRSI-B260 15 2DH1_Ant1_Hop_2441 2DH1_Ant1_Hop_2480 3DH1_Ant1_Hop_2402 FCCID: 2A9MRSI-B260 16 3DH1_Ant1_Hop_2441 3DH1_Ant1_Hop_2480 FCCID: 2A9MRSI-B260 17 Appendix A.5: Time of occupancy Test Result TestMode Antenna Frequency[MHz] BurstWidth [ms] TotalHops [Num] Result[s] Limit[s] Verdict DH1 Ant1 Hop 0.37 320 0.118 ≤0.4 PASS DH3 Ant1 Hop 1.63 160 0.26 ≤0.4 PASS DH5 Ant1 Hop 2.88 100 0.288 ≤0.4 PASS 2DH1 Ant1 Hop 0.38 330 0.125 ≤0.4 PASS 2DH3 Ant1 Hop 1.64 180 0.295 ≤0.4 PASS 2DH5 Ant1 Hop 2.88 110 0.317 ≤0.4 PASS 3DH1 Ant1 Hop 0.36 320 0.116 ≤0.4 PASS 3DH3 Ant1 Hop 1.63 190 0.309 ≤0.4 PASS 3DH5 Ant1 Hop 2.88 130 0.375 ≤0.4 PASS FCCID: 2A9MRSI-B260 18 Test Graphs DH1_Ant1_Hop DH1_Ant1_Hop FCCID: 2A9MRSI-B260 19 DH3_Ant1_Hop DH3_Ant1_Hop FCCID: 2A9MRSI-B260 20 DH5_Ant1_Hop DH5_Ant1_Hop 2DH1_Ant1_Hop FCCID: 2A9MRSI-B260 21 2DH1_Ant1_Hop 2DH3_Ant1_Hop FCCID: 2A9MRSI-B260 22 2DH3_Ant1_Hop 2DH5_Ant1_Hop 2DH5_Ant1_Hop FCCID: 2A9MRSI-B260 23 3DH1_Ant1_Hop 3DH1_Ant1_Hop FCCID: 2A9MRSI-B260 24 3DH3_Ant1_Hop 3DH3_Ant1_Hop 3DH5_Ant1_Hop FCCID: 2A9MRSI-B260 25 3DH5_Ant1_Hop FCCID: 2A9MRSI-B260 26 Appendix A.6: Number of hopping channels Test Result TestMode Antenna Frequency[MHz] Result[Num] Limit[Num] Verdict DH1 Ant1 Hop 79 ≥15 PASS 2DH1 Ant1 Hop 79 ≥15 PASS 3DH1 Ant1 Hop 79 ≥15 PASS FCCID: 2A9MRSI-B260 27 Test Graphs DH1_Ant1_Hop 2DH1_Ant1_Hop FCCID: 2A9MRSI-B260 28 3DH1_Ant1_Hop FCCID: 2A9MRSI-B260 29 Appendix A.7: Band edge measurements Test Result TestMode Antenna ChName Frequency[MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH1 Ant1 Low 2402 8.65 -39.48 ≤-11.35 PASS High 2480 10.39 -39.7 ≤-9.62 PASS Low Hop_2402 8.04 -49.26 ≤-11.96 PASS High Hop_2480 10.17 -48.51 ≤-9.83 PASS 2DH1 Ant1 Low 2402 4.86 -38.98 ≤-15.14 PASS High 2480 5.86 -40.33 ≤-14.14 PASS Low Hop_2402 4.77 -49.44 ≤-15.24 PASS High Hop_2480 5.77 -48.98 ≤-14.23 PASS 3DH1 Ant1 Low 2402 4.84 -38.31 ≤-15.16 PASS High 2480 6.04 -40.46 ≤-13.96 PASS Low Hop_2402 5.03 -49.23 ≤-14.97 PASS High Hop_2480 5.81 -47.37 ≤-14.19 PASS FCCID: 2A9MRSI-B260 30 Test Graphs DH1_Ant1_Low_2402 DH1_Ant1_High_2480 FCCID: 2A9MRSI-B260 31 DH1_Ant1_Low_Hop_2402 DH1_Ant1_High_Hop_2480 FCCID: 2A9MRSI-B260 32 2DH1_Ant1_Low_2402 2DH1_Ant1_High_2480 2DH1_Ant1_Low_Hop_2402 FCCID: 2A9MRSI-B260 33 2DH1_Ant1_High_Hop_2480 3DH1_Ant1_Low_2402 FCCID: 2A9MRSI-B260 34 3DH1_Ant1_High_2480 3DH1_Ant1_Low_Hop_2402 3DH1_Ant1_High_Hop_2480 FCCID: 2A9MRSI-B260 35 Appendix A.8: Conducted Spurious Emission Test Result TestMode Antenna Frequency[MHz] FreqRange [MHz] RefLevel [dBm] Result [dBm] Limit [dBm] Verdict DH1 Ant1 2402 Reference 8.06 8.06 --- PASS 30~1000 8.06 -59.96 ≤-11.94 PASS 1000~26500 8.06 -47.5 ≤-11.94 PASS 2441 Reference 9.44 9.44 --- PASS 30~1000 9.44 -59.87 ≤-10.56 PASS 1000~26500 9.44 -47.35 ≤-10.56 PASS 2480 Reference 9.94 9.94 --- PASS 30~1000 9.94 -47.23 ≤-10.06 PASS 1000~26500 9.94 -47.2 ≤-10.06 PASS 2DH1 Ant1 2402 Reference 4.49 4.49 --- PASS 30~1000 4.49 -59.86 ≤-15.51 PASS 1000~26500 4.49 -47.92 ≤-15.51 PASS 2441 Reference 5.64 5.64 --- PASS 30~1000 5.64 -59.81 ≤-14.36 PASS 1000~26500 5.64 -47.87 ≤-14.36 PASS 2480 Reference 5.53 5.53 --- PASS 30~1000 5.53 -60.09 ≤-14.47 PASS 1000~26500 5.53 -47.95 ≤-14.47 PASS 3DH1 Ant1 2402 Reference 4.58 4.58 --- PASS 30~1000 4.58 -60.67 ≤-15.42 PASS 1000~26500 4.58 -46.42 ≤-15.42 PASS 2441 Reference 5.59 5.59 --- PASS 30~1000 5.59 -60.07 ≤-14.41 PASS 1000~26500 5.59 -47.99 ≤-14…

Text truncated - open the document above for the full version.

Shenzhen Global Test Service Co.,Ltd. No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong FCC PART 15 SUBPART C TEST REPORT FCC PART 15.247 Report Reference No. ..................... : FCC ID. ............................................ : GTS20230321014-1-1 2A9MRSI-B260 Compiled by ( position+printed name+signature).. : File administrators Peter Xiao Supervised by ( position+printed name+signature).. : Test Engineer Jenny Zeng Approved by ( position+printed name+signature).. : Manager Jason Hu Date of issue ..................................... : Apr. 28, 2023 Representative Laboratory Name . : Shenzhen Global Test Service Co.,Ltd. Address ............................................ : No.7-101 and 8A-104, Building 7 and 8, DCC Cultural and Creative Garden, No.98, Pingxin North Road, Shangmugu Community, Pinghu Street, Longgang District, Shenzhen, Guangdong,China Applicant’s name ............................ : Shenzhen Simo Innovation Technology Co., Ltd. Address ............................................ : 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Test specification ........................... : Standard ........................................... : FCC Part 15.247: Operation within the bands 902-928 MHz, 2400- 2483.5 MHz and 5725-5850 MHz TRF Originator .................................. : Shenzhen Global Test Service Co.,Ltd. Master TRF ....................................... : Dated 2014-12 Shenzhen Global Test Service Co.,Ltd. All rights reserved. This publication may be reproduced in whole or in part for non-commercial purposes as long as the Shenzhen Global Test Service Co.,Ltd. is acknowledged as copyright owner and source of the material. Shenzhen Global Test Service Co.,Ltd. takes no responsibility for and will not assume liability for damages resulting from the reader's interpretation of the reproduced material due to its placement and context. Test item description ..................... : Mini PC Trade Mark ....................................... : N/A Manufacturer .................................... : Shenzhen Simo Innovation Technology Co., Ltd. Model/Type reference ...................... : SI-B260 List Models ..................................... : N/A Modulation Type ............................... : GFSK,π/4-DQPSK,8-DPSK Operation Frequency ........................ : From 2402MHz to 2480MHz Hardware Version ............................ : MX-ANB02_MB_V200 Software Version .............................. : ANB02_SMW Rating ............................................... : DC 12.0V/3.0A by Adapter Result ............................................... : PASS Report No.: GTS20230321014-1-1 Page 2 of 41 T E S T R E P O R T Test Report No. : GTS20230321014-1-1 Apr. 28, 2023 ______________________________________________________________________________________________ Date of issue Equipment under Test : Mini PC Model /Type : SI-B260 Listed model : N/A Applicant : Shenzhen Simo Innovation Technology Co., Ltd. Address : 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Manufacturer : Shenzhen Simo Innovation Technology Co., Ltd. Address : 2/F, Building H, Xusheng wanda Industrial Park, Zhoushi Road, Shiyan Street, Baoan District Shenzhen, China Test Result: PASS The test report merely corresponds to the test sample. It is not permitted to copy extracts of these test result without the written permission of the test laboratory. Report No.: GTS20230321014-1-1 Page 3 of 41 Contents 1. TEST STANDARDS ......................................................................................................................................... 4 2. SUMMARY ....................................................................................................................................................... 5 2.1. General Remarks ................................................................................................................................... 5 2.2. Product Description ................................................................................................................................ 5 2.3. Equipment Under Test ........................................................................................................................... 6 2.4. Short description of the Equipment under Test (EUT) ........................................................................... 6 2.5. EUT operation mode .............................................................................................................................. 6 2.6. Block Diagram of Test Setup ................................................................................................................. 7 2.7. Related Submittal(s) / Grant (s) ............................................................................................................. 7 2.8. EUT Exercise Software .......................................................................................................................... 7 2.9. Special Accessories ............................................................................................................................... 7 2.10. External I/O Cable ................................................................................................................................ 7 2.11. Modifications ........................................................................................................................................ 7 3. TEST ENVIRONMENT ..................................................................................................................................... 8 3.1. Address of the test laboratory ................................................................................................................…

Text truncated - open the document above for the full version.

FCC ID: 2A9MRSI-B260 _______________________________________________________________________________________________ Page 1 of 2 1. TEST SETUP PHOTOGRAPHS 1.1. Photo of Radiated Emissions Measurement Fig. 1 Fig. 2 FCC ID: 2A9MRSI-B260 _______________________________________________________________________________________________ Page 2 of 2 Photo of Conducted Emission Measurement Fig. 3