2A9Q9-EPB-SL26Slimline 5000mAh 20W PD Aluminum Power Bank

Slimline 5000mAh 20W PD Aluminum Power Bank INSTRUCTION MANUAL EPB-SL26 READ ALL INSTRUCTIONS CAREFULLY BEFORE USE. IN THE BOX EPB-SL26 Slimline 5000mAh 20W PD Aluminum Power Bank (x1) Charging Cable (x1) SAFETY PRECAUTIONS This product is NOT a toy, keep away from children and pets. Only use the product according to the instructions in this manual. Never use the product for anything other than its intended purpose. Do not open this product or attempt to repair the unit yourself if it is not working properly. Doing so risks fire, shock or injury. When not in use, the product should be stored in a dry, cool location, away from sources of water or heat. Do not expose product or charging cable to extreme temperatures (heat or cold), open flames, humid or wet conditions. Do not submerge in water. Do not use in a location where the product or charging cable could fall i nto liquid. Unplug the charging cable when not in use. Do not pull the charging cable to disconnect, or use the cable as a handle. Do not use if the product or charging cable is damaged. If the product or charging cable is damaged, it MUST be serviced or replaced by the manufacturer or its service agent before using again. Do not over charge battery. This product contains a built-in battery and should not be disposed of with regular household waste. Please consult the local authorities on the correct way to dispose of this product. Attachments on the back of your device can impede effectiveness of the wireless charger, and lead to overheating. Remove attachments from your device before charging on this wireless charger. The strong magnetic fields of neodymium magnets can damage items, such as television, computers, computer monitors, credit cards, bank cards, diskettes and other data carriers, video tapes, mechanical watches, hearing aids, loud speakers and VCRs. Pace-makers may be damaged or switched to “test mode” in the presence of a strong magnetic force, if pace-maker or other electronical body implant is in use. Keep a minimum of 3 feet distance. - 1 - PRODUCT DIAGRAMS IN STRUCTI ONS Ch ar ge the power bank full y before using fo r t he first ti me. CHARGING THE P OWER BANK Plug t he smal l connecto r o f t he i ncluded c harging c able i nto th e USB-C port on the power bank. Plug t he oth er en d o f t he cab le i nto a USB power source, such as t he USB port on a computer o r into a cer tified U SB adap ter ( not included ), and p lug into a wal l socket. The LED i ndicator w ill fl ash W HI TE w hile th e power bank is i n c har ging and stop flas hing when t he power bank is fully charged . CHARGING ELECTRONIC DEVICES WITH THE P OWER BANK Us ing t he cab le of t he device you wish t o c har ge, c onnect th e char ging c able to your device with t he appropriate connecto r. Co nnect th e oth er en d o f t he cab le to t he USB-C port of t he power bank. The power bank w ill b eg in t o c har ge automatically. The LED i ndicator w ill illuminat e WHITE w hen char ging. Remove the cable from your mobile device when it is full y char ged . USIN G WIRELESS CHARGIN G Place a wireles s c harging enabled mobile device on the wirel es s char ging surface, th e mobile device will begin t o c har ge auto mati cal ly. The first L ED i ndicator on the right nea r t he power butt on will illuminat e GREEN to indicate th at your d evice i s char ging p roperly. If your d evice does n ot begin t o c har ge, t ry r ep ositio ning yo ur d evice on the wireles s c harging surfac e. Y ou may need t o r emove the cas e o f your d evice to char ge properly. Remove your d evice from t he wireles s c harging surfac e when it is fully char ged . - 2 - Magnetic Sur face Wireless Charging Sur face [P ower] Button Phone Stand USB-C Input & Output LED Indicator Note: WIRELESS CHARGING WITH MAGNETIC ATT ACHMENT If t he charged d evice supports M ag Safe Ch arger, s imply place the device ag ainst th e magnetic surfac e of t he power b ank, t he device will begin t o c har ge auto mati cal ly. The per fec tly al igned m ag net s in t he wirel es s c harging surfac e will attach t o t he char ged d evice and p rovide more sec ure wireles s c harging. The first LED indicator on the right nea r t he power butt on will illuminat e GREEN to indicate that your d evice i s c har ging p roperly. Remove your d evice from t he wireles s c harging surfac e when it is fully char ged . NOTE ON SAFE TY FEATURES: The wirel ess char ging will auto mati cal ly power OF F when t he wireles s c harging surfac e i s o verhea ted or w hen a metal o bje ct, such as a coin, is p lac ed o n t he wireles s c harging surfac e. The first LED i ndicator on the right nea r t he power butt on will fl ash GREEN to w arn o f a uto mati c shutoff. TECH SPECIF ICATIONS Ba tt er y Cap acity: 5000mAh /3.85V/19.25Wh USB-C I nput: DC 5 V/ 3A, 9 V/ 2A, 12V/1.5A (18W Max.) USB-C Outp ut: DC 5 V/3A, 9 V/ 2.22A, 1 2V/1.67A (20W Max.) Wirel es s Ch arging Outp ut: 5W/ 7.5W/ 10W/15W Working Temperature: 14°F ~ 113°F (-10°C ~ 45°C) - 3 - FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment …

Text truncated - open the document above for the full version.

Rev 1/26/2023 ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-16-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A9Q9-EPB-SL26 [ShenZhen Zhongyi Technology CO., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [ShenZhen Zhongyi Technology CO., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Merry Yu Rev 1/26/2023 ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 03-16-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A9Q9-EPB-SL26 [ShenZhen Zhongyi Technology CO., Ltd.] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Merry Yu

ShenZhen Zhongyi Technology CO., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: March 16, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A9Q9-EPB-SL26 ShenZhen Zhongyi Technology CO., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: ShenZhen Zhongyi Technology CO., Ltd. FRN: 0033187147 Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Signature: Contact Person: Merry Yu Tel: 0755-89501773 Email: [email protected]

ShenZhen Zhongyi Technology CO., Ltd. Date: March 16, 2026 Product Model Number: EPB-SL26, M2169Q FCC ID: 2A9Q9-EPB-SL26 To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Merry Yu Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-89501773 On behalf of: ShenZhen Zhongyi Technology CO., Ltd.

ShenZhen Zhongyi Technology CO., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: March 16, 2026 Subject; Request for Confidentiality FCC ID: 2A9Q9-EPB-SL26 To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Merry Yu Title: Manager

ShenZhen Zhongyi Technology CO., Ltd. Model Difference Statement DATE: March 16, 2026 FCC ID: 2A9Q9-EPB-SL26 Dear Sir/Madam, Added models M2169Q of the original product EPB-SL26, The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Merry Yu Title: Manager Company name: ShenZhen Zhongyi Technology CO., Ltd. Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China

Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report Annex A. EUT External Photos Model: EPB-SL26 EUT View 1 EUT View 2 Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report EUT View 5 EUT View 6 Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report EUT View 7 EUT View 8

Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 3cm * 2cm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label

Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report Annex B. EUT Internal Photos Model: EPB-SL26 EUT View 1 EUT View 2 Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report EUT View 3 EUT View 4 Coil ANT Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report EUT View 5

Report No: SSP26020153-2H MPE Test Report Page 1 of 12 MPE Test Report FCC ID: 2A9Q9-EPB-SL26 Report No. : SSP26020153-2E Applicant : ShenZhen Zhongyi Technology CO., Ltd. Product Name : Slimline 5000mAh 20W PD Aluminum Power Bank Model Name : EPB-SL26 Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-03-05 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26020153-2H MPE Test Report Page 2 of 12 Test Report Basic Information Applicant..................................: ShenZhen Zhongyi Technology CO., Ltd. Address of Applicant...............: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer..........................: ShenZhen Zhongyi Technology CO., Ltd. Address of Manufacturer........: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Product Name.........................: Slimline 5000mAh 20W PD Aluminum Power Bank Brand Name.............................: - Main Model..............................: EPB-SL26 Series Models..........................: M2169Q Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-02-05 to 2026-03-04 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26020153-2H MPE Test Report Page 3 of 12 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................7 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Setup Block Diagram ......................................................................................................................................9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 12 Report No: SSP26020153-2H MPE Test Report Page 4 of 12 Revision History Revision Issue Date Description Revised By V1.0 2026-03-05 Initial Release Lahm Peng Report No: SSP26020153-2H MPE Test Report Page 5 of 12 1. General Inf ormation 1.1 Product Information Product Name: Slimline 5000mAh 20W PD Aluminum Power Bank Trade Name: - Test Model: EPB-SL26 Series Models: M2169Q Rated Voltage: USB-C Input: 5V/3A,9V/2A, 12V/1.5A (18W Max) USB-C Output: 5V/3A,9V/2.22A, 12V/1.67A(20W Max) Output: Wireless 5W/7.5W/10W/15W Battery: DC 3.85V, 5000mAh, 19.25Wh Test Sample No: SSP26020153-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Wireless charging Output (Phone):110.5kHz-205kHz Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: SSP26020153-2H MPE Test Report Page 6 of 12 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W - TM2 Wireless charging 7.5W - TM3 Wireless charging 10W - TM4 Wireless charging 15W - TM5 Wireless charging 5W+Charging - - - - Note1: All modes have been tested and only the worst mode TM4 data is represented in the report. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite - - - - - - - - List and Details of Auxiliary Equipment Description Manufacturer Model …

Text truncated - open the document above for the full version.

Page 1 of 4 承 認 書 S PECIFICATION FOR APPROVAL 客 CUSTOMER: 客 戶 料 號： CUST P/N: 戶： 言之行 料 號： Y Z X P/N: 産 品 型 號： DESC: YZX50 日 期： DATE: 2025/1/2 版 本： Version: A.0 擬制 PREPARED BY 審核 CHECKED BY 批准 APPROVED BY 客戶承認 CUSTOMER APPROVE 李墨 万楼 李建波 Page 2 of 4 SPECIFICATION 産 品 型 號： DESC 版本 Rev： YZX50 A.0 客戶CUST: XXX 客户料号CUST P/N: 一、尺寸DIMENSION:(mm) 二、原理图SCHEMATIC DIAGRAM: A 36±1.5 B 20.5±0.5 C 1.25 Max D ± E 2-5 F 40± G 10max H 1.8max I 5.0 ref M 8.0 ref 三、绕线参数Winding Specification: 序号 NO. 端子 TERMINAL 线径 WIRE 圈数 Turns 绕线方向 Winding Direction 1 S F 48*0.08 10Ts CCW 四、电气特性ELECTRICAL CHARACTERISTICS: 温度TEMPERATURE:25±10°C, 湿度RELATIVE HUMIDITY:65±20% 序号 NO. 项目 ITEM 端子 TERMINAL 标准 SPECIFICATION 测试条件 TEST FREQUENCY 测试仪器 TEST EQUIPMENTS 1 IND. S-F 3.5uH ±20%单独线圈 100KHz/1.0V LCZ METER 1062B 2 IND. S-F 6.3uH ±10%加磁片 100KHz/1.0V LCZ METER 1062B 3 DCR S-F ≤mΩLCZ METER 502B Page 3 of 4 擬制/日期PREPARED BY/DATE 審核/日期CHECKED BY/DATE

Report No: SSP26020153-1E FCC Test Report Page 1 of 27 FCC TEST REPORT FCC ID: 2A9Q9-EPB-SL26 Report No. : SSP26020153-1E Prepared For : ShenZhen Zhongyi Technology CO., Ltd. Product Name : Slimline 5000mAh 20W PD Aluminum Power Bank Model Name : EPB-SL26 FCC Rule : FCC Part 15 Subpart C Date of Issue : 2026-03-05 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26020153-1E FCC Test Report Page 2 of 27 Test Report Basic Information Applicant..................................: ShenZhen Zhongyi Technology CO., Ltd. Address of Applicant...............: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer..........................: ShenZhen Zhongyi Technology CO., Ltd. Address of Manufacturer........: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Product Name.........................: Slimline 5000mAh 20W PD Aluminum Power Bank Brand Name.............................: - Main Model..............................: EPB-SL26 Series Models..........................: M2169Q Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-02-05 to 2026-03-04 Test Result...............................: PASSED Tested Engineer ....................: (Walker Wu) Project Manager......................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26020153-1E FCC Test Report Page 3 of 27 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.................................................................................................................................................... 26 6.3 Test Data and Results ...........................................…

Text truncated - open the document above for the full version.

Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report Radiated Emission Test View 2 Radiated Emission Test View 3 Report No: SSP26020153-1E FCC ID: 2A9Q9-EPB-SL26 Annex of Test Report Radiated Emission Test View 4