2A9Q9-M2319Q10000mAh Wireless Power Bank

206x99mm

Rev 1/26/2023 ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-02-2026 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2A9Q9-M2319Q [ShenZhen Zhongyi Technology CO., Ltd.] certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. [ShenZhen Zhongyi Technology CO., Ltd.] certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, (Applicant signature) (Applicant printed name) Merry Yu Rev 1/26/2023 ShenZhen Zhongyi Technology CO., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 06-02-2026 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2A9Q9-M2319Q [ShenZhen Zhongyi Technology CO., Ltd.] ce8rtifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, (Applicant signature) (Applicant printed name) Merry Yu

ShenZhen Zhongyi Technology CO., Ltd. U.S. Agent Letter of Attestation To: Federal Communications Commission 7435 Oakland Mills Road, Columbia, MD 21046, USA Date: June 2, 2026 Ref: Attestation Statement – Part 2.911(d)(7) filing FCC ID: 2A9Q9-M2319Q ShenZhen Zhongyi Technology CO., Ltd. (“the applicant”) certifies that, as of the date of the filing of the application, CLF Import and Export Limited (“the agent”) is our designated U.S. agent for service of process for the above reference FCC ID. The applicant accepts to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. The applicant further acknowledges it is our responsibility to inform the FCC whenever the agent information changes. CLF Import and Export Limited ("the agent) understand it is the agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address. Designated U.S. Agent Company Name: CLF Import and Export Limited FRN: 0033489683 Address: 1312 17th Street #692, Denver, CO 80202, United States Signature: Contact Person: David Chen Tel: +1 949 254 2565 Email: [email protected] Applicant Company Name: ShenZhen Zhongyi Technology CO., Ltd. FRN: 0033187147 Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Signature: Contact Person: Merry Yu Tel: 0755-89501773 Email: [email protected]

ShenZhen Zhongyi Technology CO., Ltd. Date: June 2, 2026 Product Model Number: M2319Q, JB86 FCC ID: 2A9Q9-M2319Q To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Merry Yu Contact Listed on FCC Wesbite Title: Manager Email: [email protected] Telephone: 0755-89501773 On behalf of: ShenZhen Zhongyi Technology CO., Ltd.

ShenZhen Zhongyi Technology CO., Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 2, 2026 Subject; Request for Confidentiality FCC ID: 2A9Q9-M2319Q To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Merry Yu Title: Manager

ShenZhen Zhongyi Technology CO., Ltd. Model Difference Statement DATE: June 2, 2026 FCC ID: 2A9Q9-M2319Q Dear Sir/Madam, Added models JB86 of the original product M2319Q, The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Sincerely, Name: Merry Yu Title: Manager Company name: ShenZhen Zhongyi Technology CO., Ltd. Address: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China

Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report Annex A. EUT External Photos Model: M2319Q EUT View 1 EUT View 2 Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report EUT View 3 EUT View 4 Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report EUT View 5 EUT View 6

Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report Annex D. Label and Inf ormation FCC Label Sample FCC Labe Size: 20mm * 4mm FCC Label Specifications Text is Black in color and is justified. Labels are printed in indelible ink on permanent adhesive backing or silk-screened onto the EUT or shall be affixed at a conspicuous location on the EUT. Where the EUT is constructed in two or more sections connected by wires and marketed together, the above statement is required to be affixed only to the main control unit. When the EUT is so small or for such use that it is not practicable to place the statement on it, the above information shall be placed in a prominent location in the instruction manual or pamphlet supplied to the user or, alternatively, shall be placed on the container in which the device is marketed. FCC Label Location Label

Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report Annex B. EUT Internal Photos Model: M2319Q EUT View 1 EUT View 2 Coil ANT Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report EUT View 3 EUT View 4

Report No: SSP26050402-2H MPE Test Report Page 1 of 12 MPE Test Report FCC ID: 2A9Q9-M2319Q Report No. : SSP26050402-2E Applicant : ShenZhen Zhongyi Technology CO., Ltd. Product Name : 10000mAh Digital Display Magnetic Wireless PowerBank Model Name : M2319Q Test Standard : FCC CFR 47 PART 1, 1.1310 Date of Issue : 2026-06-01 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26050402-2H MPE Test Report Page 2 of 12 Test Report Basic Information Applicant..................................: ShenZhen Zhongyi Technology CO., Ltd. Address of Applicant...............: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer..........................: ShenZhen Zhongyi Technology CO., Ltd. Address of Manufacturer........: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Product Name.........................: 10000mAh Digital Display Magnetic Wireless PowerBank Brand Name.............................: - Main Model..............................: M2319Q Series Models..........................: JB86 Test Standard..........................: FCC CFR 47 PART 1, 1.1310 KDB 680106 D01 Wireless Power Transfer v04 Date of Test .............................: 2026-05-23 to 2026-05-29 Test Result...............................: PASS Tested By ................................: (Walker Wu) Reviewed By............................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26050402-2H MPE Test Report Page 3 of 12 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Test Facilities ........................................................................................................................................................7 1.4 List of Measurement Instruments ..........................................................................................................................7 1.5 Measurement Uncertainty .....................................................................................................................................7 2. RF Exposure .................................................................................................................................................................8 2.1 Standard and Limit................................................................................................................................................8 2.2 Test Procedures ....................................................................................................................................................8 2.3 Test Setup Block Diagram ......................................................................................................................................9 2.4 Test Data and Results .......................................................................................................................................... 10 Annex A. Test Photos ..................................................................................................................................................... 12 Report No: SSP26050402-2H MPE Test Report Page 4 of 12 Revision History Revision Issue Date Description Revised By V1.0 2026-06-01 Initial Release Lahm Peng Report No: SSP26050402-2H MPE Test Report Page 5 of 12 1. General Inf ormation 1.1 Product Information Product Name: 10000mAh Digital Display Magnetic Wireless PowerBank Trade Name: - Test Model: M2319Q Series Models: JB86 Rated Voltage: Type-C Input: DC 5V/3A,9V/2A, 12V/1.5A (18W Max) Type-C Output: DC 5V/3A,9V/2.22A, 12V/1.67A(20W Max) Wireless Output: 5W/7.5W/10W/15W Battery: DC 3.85V, 10000mAh, 38.5Wh Test Sample No: SSP26050402-1 Hardware Version: V1.0 Software Version: V1.0 Note 1: The test data is gathered from a production sample, provided by the manufacturer. Note 2: The color of appearance and model name of series models listed are different from the main model, but the circuit and the electronic construction are the same, declared by the manufacturer. Wireless Specification Wireless Standard: WPC (QI) Operating Frequency: Wireless charging Output (Phone):110.5kHz-205kHz Modulation: FSK Antenna Gain: 0dBi Type of Antenna: Coil Antenna Type of Device: Portable Device Mobile Device Modular Device Report No: SSP26050402-2H MPE Test Report Page 6 of 12 1.2 Test Setup Information List of Test Modes Test Mode Description Remark TM1 Wireless charging 5W - TM2 Wireless charging 7.5W - TM3 Wireless charging 10W - TM4 Wireless charging 15W - TM5 Wireless charging 5W+Charging - - - - Note1: All modes have been tested and only the worst mode TM4 data is represented in the report. List and Details of Auxiliary Cable Description Length (cm) Shielded/Unshielded With/Without Ferrite - - - - - - - - List and Details of Auxiliary Equipment Descript…

Text truncated - open the document above for the full version.

Report No: SSP26050402-1E FCC Test Report Page 1 of 27 FCC TEST REPORT FCC ID: 2A9Q9-M2319Q Report No. : SSP26050402-1E Prepared For : ShenZhen Zhongyi Technology CO., Ltd. Product Name : 10000mAh Wireless Power Bank Model Name : M2319Q FCC Rule : FCC Part 15 Subpart C Date of Issue : 2026-06-01 Shenzhen CCUT Quality Technology Co., Ltd. 1F, Building 35, Changxing Technology Industrial Park, Yutang Street, Guangming District, Shenzhen, Guangdong, China; (Tel.:+86-755-23406590 website: www.ccuttest.com) This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd. Report No: SSP26050402-1E FCC Test Report Page 2 of 27 Test Report Basic Information Applicant..................................: ShenZhen Zhongyi Technology CO., Ltd. Address of Applicant...............: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Manufacturer..........................: ShenZhen Zhongyi Technology CO., Ltd. Address of Manufacturer........: Room 401, No.4 Road One, Shangxue Science and Technology City, Xinxue Community, Bantian Street, Longgang District, Shenzhen, China Product Name.........................: 10000mAh Wireless Power Bank Brand Name.............................: - Main Model..............................: M2319Q Series Models..........................: JB86 Test Standard..........................: FCC Part 15 Subpart C ANSI C63.4-2014 ANSI C63.10-2020 Date of Test .............................: 2026-05-23 to 2026-05-29 Test Result...............................: PASSED Tested Engineer ....................: (Walker Wu) Project Manager......................: (Lorzix Luo) Authorized Signatory............: (Lahm Peng) Note : This test report is limited to the above client company and the product model only. It may not be duplicated without prior permitted by Shenzhen CCUT Quality Technology Co., Ltd.. All test data presented in this test report is only applicable to presented test sample. Report No: SSP26050402-1E FCC Test Report Page 3 of 27 CONTENTS 1. General Information ....................................................................................................................................................5 1.1 Product Information .............................................................................................................................................5 1.2 Test Setup Information..........................................................................................................................................6 1.3 Compliance Standards ...........................................................................................................................................7 1.4 Test Facilities ........................................................................................................................................................7 1.5 List of Measurement Instruments ..........................................................................................................................8 1.6 Measurement Uncertainty .....................................................................................................................................8 2. Summary of Test Results .............................................................................................................................................9 3. Antenna Requirement ............................................................................................................................................... 10 3.1 Standard and Limit.............................................................................................................................................. 10 3.2 Test Result .......................................................................................................................................................... 10 4. Conducted Emissions ................................................................................................................................................ 11 4.1 Standard and Limit.............................................................................................................................................. 11 4.2 Test Procedure.................................................................................................................................................... 11 4.3 Test Data and Results .......................................................................................................................................... 12 5. Radiated Emissions ................................................................................................................................................... 15 5.1 Standard and Limit.............................................................................................................................................. 15 5.2 Test Procedure.................................................................................................................................................... 15 5.3 Test Data and Results .......................................................................................................................................... 17 6. Occupied Bandwidth ................................................................................................................................................. 26 6.1 Standard and Limit.............................................................................................................................................. 26 6.2 Test Procedure.................................................................................................................................................... 26 6.3 Test Data and Results .................................................................................…

Text truncated - open the document above for the full version.

产 品 规 格 书 SPECIFICATION FOR APPROVAL Specification number 2025002026004 Effective date 2025/2/26 Customer name Ai Xiaodian Product type A11 coil Top Intelligence Part Number TX-DZ43.505.3006-K6.5-L40 AWIR0038 authorized strength auditratify Li Pinghui / Ma Xiangping Guangdong Dingzhi Electronic Technology Co., Ltd. Factory Address: 1st Floor, No. 1231, Yingbin Avenue, Longmen County, Huizhou City, Guangdong Province 产 品 规 格 书 SPECIFICATION FOR APPROVAL Customer nameAi Xiaodian Customer Material Number AWIR0038 Top Intelligence Part Number TX-DZ43.505.3008-K6.5-L35 specification number 2025002026004 versions 01 ♦、boundary dimension (unit: mm) A5.3 ±0.5 B20.5 ±1.0 C39.0 ±1.0 D43.5 ±0.5 E43.5 ±.1.0 F ±3.47.00 G3.0 ±2.0 H1.8 ±0.5 I0.80 ±0.2 (1) Wire diameter: 0.08 * 24P * 2 enameled wire (2)Number of turns in the coil: 10TS (3) Does the tail line cross over: Yes (4)Coil package with 8mm wide high-temperature adhesive tape (5) The coil and the magnetic sheet need to be adhered in the center. (6) Stick three round white adhesive tapes on the back of the magnetic disk. ♦、electrical specification: parameterspecificationtest conditiontest instrument L06.5±10%μH100KHz/1V■TH1816B Q>30 min100KHz/1V■TH1816B DCR<60mΩ@ 25°C■CH-502BC ♦、temperature grade: operating temperature -40°C~ 125°C ♦、bill of materials: NO.Namespecificationremark 1 magnetic sheet 43.5*5.3*0.6T PC40 Manganese Zinc 2 copper wire 0.08*24P*2 enameled wire 3 high-temperature tape 8MM Environmental protection tape 4 glueglue Environmental protection adhesive tape 5 tin 107H Qiandao Environmental Protection Tin 6 glueglueeco-friendly adhesive 编制审核批准 Li Pinghui / Ma Xiangping

Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report Annex C. Test Photos Conducted Emission Test View 1 Radiated Emission Test View 1 Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report Radiated Emission Test View 2 Radiated Emission Test View 3 Report No: SSP26050402-1E FCC ID: 2A9Q9-M2319Q Annex of Test Report Radiated Emission Test View 4