2A9XP-ID001INTUITION display

CYC MOTOR LTD. Confidential Proprietary 1 INTUITION DISPLAY Operational Manual MODEL NAME: INTUITION DISPLAY MODEL NO.: ID001 VERSION NO.: V0 TRADE MARK: CYC COMPANY: CYC MOTOR LTD. AUTHOR: MR. FELIX / MR. PAUL LAI Counter Checking: MR. HUNTER DATE: AUG. 25, 2023 CYC MOTOR LTD. Confidential Proprietary 2 INTUITION DISPLAY Product Overview The product under concern which is the smart display for the ebike, it displays the parameters of battery, walk modes, controller and torque sensors as well, and also equipped with Bluetooth chip that enable user to turn on the ANT+ lights, access to the phone app wirelessly. This product (DUT) Device Under Test unit, which only built-in electronic components and solder parts and coin size battery, Bluetooth chip insdie and LCD display, the only accessory which is the key-knob, that enable user to access the display. The main power supply of the device that connects to the chargeable battery outside. CYC MOTOR LTD. Confidential Proprietary 3 INTUITION DISPLAY Product diagram Back view CYC MOTOR LTD. Confidential Proprietary 4 INTUITION DISPLAY Front view CYC MOTOR LTD. Confidential Proprietary 5 INTUITION DISPLAY Key-knob (Power On Button) CYC MOTOR LTD. Confidential Proprietary 6 INTUITION DISPLAY Power Supply CYC MOTOR LTD. Confidential Proprietary 7 INTUITION DISPLAY Button (Key) Side v Front view 1 CYC MOTOR LTD. Confidential Proprietary 8 INTUITION DISPLAY Front view 2 Power On CYC MOTOR LTD. Confidential Proprietary 9 INTUITION DISPLAY Press “POWER” button and hold Release finger when Logo show up. At first time, it needs to be enter password, say “0000”, By pressing UP or DOWN button to select the digits and press “M” button if the digit want to be entered. CYC MOTOR LTD. Confidential Proprietary 10 INTUITION DISPLAY Password confirmation By navigating the UP or DOWN button and locate the orange mark on the “circle tick” then press “M” button to confirm the password setting. Product at normal operating once complete the above procedures. CYC MOTOR LTD. Confidential Proprietary 11 INTUITION DISPLAY CYC MOTOR LTD. Confidential Proprietary 12 INTUITION DISPLAY For Fixed 2.4GHz wireless transmission, there’s a label marking on the back of the DUT (Device Under Test) and operation procedure are the same as above except It radiates 2.4GHz wireless frequency, once it power on, it starting its 2.4GHz frequency transmission, Non-stop. CYC MOTOR LTD. Confidential Proprietary 13 INTUITION DISPLAY Accessory Part: The DUT (Device Under Test) the only accessory part which is the key-knob, which is already well connected to the DUT. END Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothefollowingtwoconditions:(1)thisdevicemay notcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethatmaycauseundesiredoperation. Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecouldvoidtheuser’sauthorityto operatetheequipment.ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClassBdigitaldevice, pursuanttoPart15oftheFCCRules.Theselimitsaredesignedtoprovidereasonableprotectionagainstharmfulinterference inaresidentialinstallation.Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnotinstalledand usedinaccordancewiththeinstructions,maycauseharmfulinterferencetoradiocommunications.However,thereisno guaranteethatinterferencewillnotoccurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferencetoradio ortelevisionreception,whichcanbedeterminedbyturningtheequipmentoffandon,theuserisencouragedtotrytocorrect theinterferencebyoneormoreofthefollowingmeasures: ‐‐Reorientorrelocatethereceivingantenna. ‐‐Increasetheseparationbetweentheequipmentandreceiver. ‐‐Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthereceiverisconnected. ‐‐Consultthedealeroranexperiencedradio/TVtechnicianforhelp.ct. ThisequipmentcomplieswiththeFCCRFradiationexposurelimitssetforthforanuncontrolledenvironment.Thisequipment shouldbeinstalledandoperatedwithaminimumdistanceof20cmbetweentheradiatorandanypartofyourbody.

CYCMotorLimited CERTIFICATIONSCONCERNING“COVERED”EQUIPMENT Date:Sep.08,2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,Maryland21046 FCCID:2A9XP-ID001 ToWhomItMayConcern: Asrequiredbysection 2.911(d)(5)(i),CYCMotorLimited (“theapplicant”)certifiesthat theequipmentforwhichauthorizationissoughtisnot“covered”equipmentprohibited fromreceivinganequipmentauthorizationpursuanttosection2.903oftheFCCrules. Asrequiredbysection2.911(d)(5)(ii), CYCMotorLimited (“theapplicant”)certifies that,asofthedateofthefilingoftheapplication,theapplicantisnotidentifiedonthe CoveredListasanentityproducing“covered”equipment. Thankyouforyourattentiontothismatter. Sincerelyyours, Signature: PrintedName:DorisChan Company:CYCMotorLimited JobTitle:PM Email:[email protected] Telephone:36908938

CYCMotorLimited LetterofAgency Date：Sep.08,2023 ElementMaterialsTechnology 100FrobisherBusinessPark Malvern Worcestershire WR141BX UK FCCID:2A9XP-ID001 ToWhomItMayConcern: Wecertifythatwearenotsubjecttodenialoffederalbenefits,thatincludesFCCbenefits, pursuanttoSection5301oftheAnti-DrugAbuseACTof1988,U.S.C.862.Further,noparty,as definedin47CFR1.2002(b),totheapplication,issubjecttodenialoffederalbenefits,that includesFCCbenefits. Thankyouforyourattentiontothismatter. Sincerelyyours, Signature: PrintedName:DorisChan Company:CYCMotorLimited JobTitle:PM Email:[email protected] Telephone:36908938

CYCMotorLimited RequestforConfidentialityLetter-FCC Date：Sep.08,2023 FederalCommunicationsCommission AuthorizationandEvaluationDivision 7435OaklandMillsRoad Columbia,Maryland21046 Re:Requestforconfidentiality FCCID:2A9XP-ID001 Towhomitmayconcern, Weherebyrespectfullyrequestthatundertheprovisionof47CFR0.459and0.457(d)the documentslistedbelowandattachedwiththisapplicationforcertificationbeprovidedwith confidentialstatus.  Schematics.pdf OperationalDescription.pdf  FrequencyBlockDiagrams.pdf Anyexhibit/informationforwhichwehaverequestedconfidentiality,butwhichmaynotbe accordedsuchtreatmentbytheFCC,shouldbereturnedtous. Thedocumentslistedabovecontaintradesecretsthataretreatedasconfidentialbyus. Substantialcompetitiveharmtouscouldresultshouldtheybemadeavailabletothepublic. Sincerely, Signature: PrintedName:DorisChan Company:CYCMotorLimited JobTitle:PM Email:[email protected] Telephone:36908938

ExternalPhotos

FCCID:2A9XP-ID001 Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe followingtwoconditions:(1)thisdevicemaynotcauseharmfulinterference,and (2)Thisdevicemustacceptanyinterferencereceived,includinginterferencethat maycauseundesiredoperation.

InternalPhotos ※※※※※ENDOFREPORT※※※※※ ANT2 ANT3 ANT1

FCCID:2A9XP-ID001 RFExposureEvaluation Limits Thecriterialistedinthefollowingtableshallbeusedtoevaluatetheenvironmentimpactofhumanexposure toradiofrequency(RF)radiationasspecifiedin1.1307(b) LimitsforMaximumPermissibleExposure(MPE) Frequencyrange (MHz) Electricfield strength (V/m) Magneticfieldstrength (A/m) Powerdensity (mW/cm 2 ) Averagingtime (minutes) (A)LimitsforOccupational/ControlledExposures 0.3–3.06141.63*(100)6 3.0–301842/f4.89/f*(900/f 2 )6 30–30061.40.1631.06 300–1500f/3006 1500–100,00056 (B)LimitsforGeneralPopulation/UncontrolledExposure 0.3–1.346141.63*(100)30 1.34–30824/f2.19/f*(180/f 2 )30 30–30027.50.0730.230 300–1500f/150030 1500–100,0001.030 f=frequencyinMHz Friistransmissionformula:Pd=(Pout*G)/(4*pi*r 2 ) Where Pd=powerdensityinmW/cm 2 ,Pout=outputpowertoantennainmW; G=gainofantennainlinearscale,Pi=3.1416; R=distancebetweenobservationpointandcenteroftheradiatorincm PdidthelimitofMPE,1mW/cm 2 .Ifweknowthemaximumgainoftheantennaandthetotalpowerinputto theantenna,throughthecalculation,wewillknowthedistancerwheretheMPElimitisreached. TestProcedure SoftwareprovidedbyclientenabledtheEUTtotransmitandreceivedataatlowest,middleandhighest channelindividually. TestResultofRFExposureEvaluation 2.4GBLEmode Channel Antenna Gain (dBi) Antenna Gain (numeric) Maxtune-up conducted power Outputpowerto antenna(mW) PowerDensityat R=20cm (mW/cm 2 ) Limit (mW/cm 2 ) Result 2402MHz 0.611.151-0.470.900.0002051 PASS 2402MHz 1.481.406-0.100.980.0002731 PASS 2402MHz 1.231.327-0.210.950.0002521 PASS simultaneoustransmission=0.000205+0.000273+0.000252=0.00073 Remark:ANT1antennagain=0.61dBi ANT2antennagain=1.48dBi ANT3antennagain=1.23dBi

深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber1-14 规格书 for SD002BT天线 骏创科技有限公司 客户料号 本公司料号 SD002-BT-FPC-3in1 编制：曾小凤审核：李明 日期：2023.08.31 深圳市铄点电子科技有限公司 深圳市南山区马家龙金龙工业城64栋西508 邮箱：[email protected] 电话:0755-86006322 传真:0755-86006323 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number2-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber2-14 目录 规格书....................................................................................................................................1 深圳市铄点电子科技有限公司................................................................................................1 目录............................................................................................................................................2 1.双方确认.................................................................................................................................3 2.一般事项.................................................................................................................................4 3.产品一般规格.........................................................................................................................4 4.产品规格明细.........................................................................................................................5 4.1产品结构参数......................................................................................................................5 4.2产品电性能测试数据.........................................................................................................7 5.产品包装方式.....................................................................................................................14 6.文档履历.............................................................................................................................14 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number3-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber3-14 1.双方确认 1.1客户确认签字 客户：骏创科技有限公司 客户部门/职位确认人签字确认日期 硬件/射频 结构 项目经理 商务/采购 审核 1.2 铄点科技确认签字 部门/职位确认人签字确认日期 天线工程师 结构工程师 项目经理 QA 审核 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number4-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber4-14 2.一般事项 2.1适用范围 本规格书只适用于骏创科技SD0022.4GBT天线 2.2使用温度范围 本产品使用温度范围-20~+65°C 2.3 保存温度范围 本产品保存于-30~+75°C 3.产品一般规格 NO.ITEMSDETAILS 1机型 SD002 2频段2400-2500MHz 3VSWR≤3.0 4阻抗50Ω 5天线类型IFA 6天线实现形式 FPC 7天线图片 1# 2# 3# ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number5-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber5-14 4.产品规格明细 4.1产品结构参数 4.11 产品物料组成： 序号材料规格(MM) 1FPC67.21*31.84黑色 2同轴线 三代端子，线径φ0.81，总长30MM， 黑色（用量3pcs） 4.12外观 产品外观良好，无伤痕、汗迹、突起等严重影响外观缺陷。 4.13结构尺寸 参考产品图纸： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number6-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber6-14 产品图纸： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number7-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber7-14 4.2 产品电性能测试数据 4.21测试环境及仪器设备 测试环境： 温度：10°C——+30°C 相对湿度：≤80%（+40°C） 大气压力：750mmkg±30mmkg 测试设备： 网络分析仪 KEYSIGHTE5071C 多探头微波暗室 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number8-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber8-14 4.22产品电性能测试数据： 1#天线的S11图： Marker2400MHz2450MHz2500MHz Returnloss-7.69-19.78-10.44 VSWR2.41.221.85 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number9-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber9-14 2#天线的S11数据： Marker2400MHz2450MHz2500MHz Returnloss-6.53-19.29-8.85 VSWR2.741.232.14 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number10-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber10-14 3#天线的S11数据： Marker2400MHz2450MHz2500MHz Returnloss-6.30-22.40-9.22 VSWR2.881.172.02 ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number11-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber11-14 4.23增益、效率及辐射方向图 1# 天线增益、效率及辐射方向图 频率（MHz）Gain（dBi）Efficiency（%） 2400.0-0.8427.18 2410.0-0.2928.77 2420.00.2130.28 2430.00.4330.93 2440.00.5631.52 2450.00.6132.13 2460.00.4131.59 2470.0-0.0129.93 2480.0-0.3828.72 2490.0-0.8127.41 2500.0-1.1227.32 1#天线2450MHz辐射方向图： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number12-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber12-14 2# 天线增益、效率及辐射方向图 频率（MHz）Gain（dBi）Efficiency（%） 2400.00.7637.42 2410.00.9837.73 2420.01.1138.48 2430.01.1839.08 2440.01.3540.25 2450.01.4841.27 2460.01.3940.48 2470.01.1738.68 2480.00.7736.27 2490.00.3333.67 2500.00.1231.23 2#天线2450MHz辐射方向图： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number13-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber13-14 3# 天线增益、效率及辐射方向图 频率（MHz）Gain（dBi）Efficiency（%） 2400.0-0.4225.25 2410.0-0.3525.68 2420.0-0.1626.65 2430.00.4429.36 2440.00.9132.11 2450.01.2334.55 2460.01.2235.25 2470.00.9934.56 2480.00.7533.61 2490.00.3731.53 2500.00.0830.01 3#天线2450MHz辐射方向图： ShenzhenShuodianElectronicTechnologyCo.,Ltd Date:2014-6-30Page number14-8 深圳市铄点电子科技有限公司 ShenzhenShuodianElectronicTechnologyCo.,Ltd Pagenumber14-14 5.产品包装方式 包装方式： 自封袋包装，每包200PCS。 6.文档履历 文件编号 DocumentNo. 日期 ReleaseDate 2023/08/31 编制 Author Hungjie 复核 Review WH 文件历次表 RevisedHistory DateVersionRevisedRecord 2023/08/311.00NewProject

BSL TestingCo.,LTD.ProjectNo.: BSL2305318275035F Page 1 of 59 FCCPART15C Measurementand Test Report For CYCMotorLimited FCCID: 2A9XP-ID001 FCC Rule(s)/Methods: FCCCFR Title 47 Part 15 SubpartC Section15.247 ANSIC63.10:2013 ProductDescription: INTUITIONdisplay Trademark CYCMOTOR Model/Typereference.: ID001 ReportNo.: BSL2305318275035F Date of receiptof test item:Aug.23 , 202 3 Date of sampling:Aug.23 , 202 3 TestedDate:Aug.23 , 202 3 to Aug.31 , 202 3 IssuedDate:Aug.31 , 202 3 TestedBy: CindyZheng/Engineer ReviewedBy: HaleyWen/EMCManager Approved& AuthorizedBy: MikeMo / PSQManager BSL TestingCo.,LTD. 1/F, BuildingB, XinshidaiGR Park,ShiyanStreet,Bao'anDistrict,Shenzhen,Shiyan Street,Bao'anDistrict,Shenzhen,Guangdong,518052,People’s Republicof China Tel: 400-882-9628Fax: 86- 755-26508703 BSL TestingCo.,LTD.ProjectNo.: BSL2305318275035F Page 2 of 59 Table of ContentsPage 1.Version......................................................................................................................................................4 2. SUMMARYOF TESTRESULTS.............................................................................................................5 2.1 TESTFACILITY...............................................................................................................................6 2.2 MEASUREMENTUNCERTAINTY...................................................................................................6 3. GENERALINFORMATION......................................................................................................................7 3.1 GENERALDESCRIPTION..............................................................................................................7 3.2 DESCRIPTIONOF TESTMODES..................................................................................................9 3.3 BLOCKDIGRAMSHOWINGTHE CONFIGURATIONOF SYSTEMTESTED..............................9 3.4 DESCRIPTIONOF SUPPORTUNITS(CONDUCTEDMODE).......................................................9 3.5 EQUIPMENTSLISTFORALL TESTITEMS.................................................................................10 4. EMCEMISSIONTEST..........................................................................................................................12 4.1 CONDUCTEDEMISSIONMEASUREMENT................................................................................12 4.1.1POWERLINECONDUCTEDEMISSIONLimits..................................................................12 4.1.2TESTPROCEDURE.............................................................................................................12 4.1.3DEVIATIONFROMTESTSTANDARD................................................................................12 4.1.4TESTSETUP........................................................................................................................13 4.1.5EUT OPERATINGCONDITIONS.........................................................................................13 4.2.1RadiatedEmissionLimits.....................................................................................................16 4.2.2TESTPROCEDURE.............................................................................................................17 4.2.3DEVIATIONFROMTESTSTANDARD................................................................................17 4.2.4TESTSETUP........................................................................................................................17 4.2.5EUT OPERATINGCONDITIONS.........................................................................................18 5.RADIATEDBandEMISSIONMEASUREMENT.....................................................................................23 5.1 Test Requirement:....................................................................................................................23 5.2 TESTPROCEDURE................................................................................................................23 5.3 DEVIATIONFROMTESTSTANDARD...................................................................................23 5.4 TESTSETUP...........................................................................................................................24 5.5 EUT OPERATINGCONDITIONS............................................................................................24 5.6 TESTRESULT.........................................................................................................................25 6.POWERSPECTRALDENSITYTEST....................................................................................................26 6.1 Appliedprocedures/ limit .........................................................................................................26 6.2 TESTPROCEDURE................................................................................................................26 6.3 DEVIATIONFROMSTANDARD..............................................................................................26 6.4 TESTSETUP...........................................................................................................................26 6.5 EUT OPERATIONCONDITIONS............................................................................................26 6.6 TESTRESULT.........................................................................................................................27 BSL TestingCo.,LTD.ProjectNo.: BSL2305318275035F Page 3 of 59 Table of ContentsPage 7. ChannelBandwidth................................................................................................................................33 7.1 Appliedprocedures/ limit .........................................................................................................33 7.2 TESTPROCEDURE................................................................................................................33 7.3 DEVIATIONFROMST…

Text truncated - open the document above for the full version.

EUTTESTPHOTO