2AA2U-DWW100Canvio Wireless Adapter

User's Manual Toshiba Wi-Fi Adapter User’s Manual Table of Contents Chapter 1 Legal & Regulatory Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Working Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Additional Environments not related to EMC . . . . . . . . . . . . . . . . . . 5 Federal Communication Commission Interference Statement. . . . . . 5 Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Industry Canada Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Radiation Exposure Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Chapter 2 Introduction About the guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Product Specification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Chapter 3 Enjoying Your Videos, Photos, and Music Installing Toshiba Aero APP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Chapter 4 Troubleshooting TOSHIBA Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Chapter 1 Legal & Regulatory Copyright © 2013 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No patent liability is assumed, with respect to the use of the information contained herein. Disclaimer This manual has been validated and reviewed for accuracy. This instructions and descriptions it contains are accurate for this device at the time of this manual's publication. However, succeeding devices and manuals are subject to change without notice. TOSHIBA assumes no liability for damages incurred directly or indirectly from errors, omissions or discrepancies between this device and the manual. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, TOSHIBA CORPORATION, ITS AFFILIATES AND/OR SUPPLIERS (“TOSHIBA”) DISCLAIM ALL WARRANTIES WITH REGARD TO THE SOFTWARE, EITHER EXPRESSLY -IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE WARRANTY OF NONINFRINGEMENT OF THIRD PARTY RIGHTS, AND THE IMPLIED WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. TOSHIBA SHALL NOT WARRANT THAT THE FUNCTIONS CONTAINED IN THE SOFTWARE WILL MEET YOUR REQUIREMENTS OR THAT THE OPERATION OF THE SOFTWARE WILL BE UNINTERRUPTED OR ERROR-FREE. Notwithstanding the above, portions of the software include software files subject to certain open source license agreements, and such open source software files are subject to the notices and additional terms and conditions that are referenced in the End User License Agreement (“EULA”) shown in “Toshiba Legal Information” section of the “Legal information” available under the “About CANVIO AERO” in the “Settings” app. (EULA document is also in this package.) Such open source software files are provided on an “AS IS” basis to the maximum extent permitted by applicable law. Please carefully read “Open source licenses” section of the “Legal Information” available under the “About CANVIO AERO” in the “Settings” app for the relevant copyright and licensing terms. If there is any discrepancy between the terms and conditions of the applicable open source license agreement and the EULA, the terms and conditions of the applicable open source license agreement prevail with respect to the applicable open source software. Until the date that is three years after you acquired the Software, you may obtain a copy of the source code corresponding to the binaries for GPL- licensed file by sending a request to TOSHIBA customer service at TBD and TOSHIBA will send you a link to such source code. Working environment The Electromagnetic Compliance (EMC) of this product has been verified typically for this product category for a so call Residential, Commercial & Light Industry Environment. Any other working environment has not been verified by Toshiba and the use of this product in these working environments is maybe restricted or cannot be recommended. Possible consequences of the use of this product in non verified working environments can be: Disturbances of other products or of this product in the nearby surrounding area with temporarily malfunction or data loss/corruption as result. Example of non verified working environments and related advices: Industrial environment (e.g. where 3-phase 380V mains is being used mainly): Danger of disturbances of this product due to possible strong electromagnetic fields especially near to big machinery or power units. Medical environment: The compliance to the Medical Product Directive has not been verified by Toshiba, therefore this product cannot be used as a medical product without further verification. The use in usual office environments e.g. in hospitals should be no problem if there is no restriction by the responsible administration. Automotive environment: Please search the owner instructions of the related vehicle for advices regarding the use of this product (category). Aviation environment: Please follow the instructions of the flight personnel regarding restrictions of use. Additional environments not related to EMC Outdoor use: As a typical home/office equipment this product has no special resistance against ingress of moisture and is not strong shock proofed. Explosive atmosphere: The use of this product in such special working environment (Ex) is not allowed. Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following t…

Text truncated - open the document above for the full version.

1 CONSTRUCTION PHOTOS OF EUT 2 3

FCC ID: 2AA2U-DWW100 IC: 1365F-DWW100 Label Location Bottom of the EUT

00 HSF (Hazardous Substances Free) COMPLIANCE 201312/03 Dora TOSHIBA WIFI ADAPTER PRODUCT LABEL(TAIS) HGWA3922B00 Joline 201312/03 +/- 0.2 SPEC: 39.8 x 30MM R0.8X4, 0.08T,1C-Black, Plastic Fasson_50micron WhitePET TC/S333/BG50#WHOvprlamimapion_25micron Glossy Glear PolyesterRIBBON:White for UL certification UL certification: 1) supplier, 2) product number, 3) UL certification number Ink (ribbon) 底材 : 白色 PET / / 覆膜 : 透明 PET / 白色碳帶 6 O’CLOCK FACE OUT Pull-in way from vendor 39.8mm 1:1 Die Cut 39.8MM 30 MM R 0.8 39.8MM 30 MM R 0.8 1:1 Artwork 1:1 Label printing area 39MM 18MM 5.3MM 39MM 18MM 5.3MM Made in Philippines This device complies with Pat 15 of the FCC Rules.Operation is subject to the following two conditions:(1)This device may not cause harmful interference,and (2) this device must accept any interference received,including interference that may cause undesired operation. FCC ID : 2AA2U-DWW100IC : 1365F-DWW100CAN ICES-3 (B)/NMB-3(B) Made in Philippines This device complies with Pat 15 of the FCC Rules.Operation is subject to the following two conditions:(1)This device may not cause harmful interference,and (2) this device must accept any interference received,including interference that may cause undesired operation. FCC ID : 2AA2U-DWW100IC : 1365F-DWW100CAN ICES-3 (B)/NMB-3(B) FCC ID : 2AA2U-DWW100IC : 1365F-DWW100CAN ICES-3 (B)/NMB-3(B) FAC: F E www.toshibastorage.com DC+5V 2.0A MM/YY MAC : XX:XX:XX:XX:XX:XX S/N: XXXXXXXXXXXX P/N: HDWW100XKWF1 Model : DWW100 Label printing area 8.15mm 5.62mm 12mm 5.88mm Space of 1.5~2.5mm Made in Philippines This device complies with Pat 15 of the FCC Rules.Operation is subject to the following two conditions:(1)This device may not cause harmful interference,and (2) this device must accept any interference received,including interference that may cause undesired operation. FCC ID : 2AA2U-DWW100IC : 1365F-DWW100CAN ICES-3 (B)/NMB-3(B)

1 CONSTRUCTION PHOTOS OF EUT 2 3 4 5

Report No.: SA131111C01 1 of 6 Report Format Version 5.0.0 RF EXPOSURE REPORT REPORT NO.: SA131111C01 MODEL NO.: DWW100 FCC ID: 2AA2U-DWW100 RECEIVED: Nov. 11, 2013 ISSUED: Nov. 29, 2013 APPLICANT: Cal-Comp Electronics & Communications Company Limited ADDRESS: 3th FL., No. 99, Sec. 5, Nanjing E. Rd., Taipei, 105 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: SA131111C01 2 of 6 Report Format Version 5.0.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................... 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE ................................................................................................ 5 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) ............................ 5 2.2 MPE CALCULATION FORMULA ....................................................................... 5 2.3 CLASSIFICATION .............................................................................................. 5 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER ..................... 6 Report No.: SA131111C01 3 of 6 Report Format Version 5.0.0 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED SA131111C01 Original release Nov. 29, 2013 Report No.: SA131111C01 4 of 6 Report Format Version 5.0.0 1. CERTIFICATION PRODUCT: Canvio wireless adapter MODEL: DWW100 BRAND: TOSHIBA APPLICANT: Cal-Comp Electronics & Communications Company Limited TEST SAMPLE: Identical Prototype STANDARDS: FCC Part 2 (Section 2.1091) FCC OET Bulletin 65, Supplement C (01-01) IEEE C95.1 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE : Nov. 29, 2013 Gina Liu / Specialist APPROVED BY : , DATE : Nov. 29, 2013 Roy Wu / Manager Report No.: SA131111C01 5 of 6 Report Format Version 5.0.0 2. RF EXPOSURE 2.1 LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) FREQUENCY RANGE (MHz) ELECTRIC FIELD STRENGTH (V/m) MAGNETIC FIELD STRENGTH (A/m) POWER DENSITY (mW/cm 2 ) AVERAGE TIME (minutes) LIMITS FOR GENERAL POPULATION / UNCONTROLLED EXPOSURE 300-1500 ... ... F/1500 30 1500-100,000 ... ... 1.0 30 F = Frequency in MHz 2.2 MPE CALCULATION FORMULA Pd = (Pout*G) / (4*pi*r2) where Pd = power density in mW/cm2 Pout = output power to antenna in mW G = gain of antenna in linear scale Pi = 3.1416 R = distance between observation point and center of the radiator in cm 2.3 CLASSIFICATION The antenna of this product, under normal use condition, is at least 20cm away from the body of the user. So, this device is classified as Mobile Device. Report No.: SA131111C01 6 of 6 Report Format Version 5.0.0 2.4 CALCULATION RESULT OF MAXIMUM CONDUCTED POWER Frequency Band (MHz) Conducted Avg. Power (dBm) Antenna Gain (dBi) E.I.R.P. (mW) Power Density (mW/cm 2 ) Limit (mW/cm 2 ) 2412-2462 17.56 1 57.02 0.011 1.0

Report No.: RF131111C01 1 of 50 Report Format Version 5.2.0 FCC TEST REPORT (15.247) REPORT NO.: RF131111C01 MODEL NO.: DWW100 FCC ID: 2AA2U-DWW100 RECEIVED: Nov. 11, 2013 TESTED: Nov. 20, 2013 ISSUED: Nov. 29, 2013 APPLICANT: Cal-Comp Electronics & Communications Company Limited ADDRESS: 3th FL., No. 99, Sec. 5, Nanjing E. Rd., Taipei, 105 ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB ADDRESS: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) TEST LOCATION: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF131111C01 2 of 50 Report Format Version 5.2.0 TABLE OF CONTENTS RELEASE CONTROL RECORD ..............................................................................................................4 1. CERTIFICATION ..........................................................................................................................5 2. SUMMARY OF TEST RESULTS .................................................................................................6 2.1 MEASUREMENT UNCERTAINTY ................................................................... 6 3. GENERAL INFORMATION ..........................................................................................................7 3.1 GENERAL DESCRIPTION OF EUT ................................................................. 7 3.2 DESCRIPTION OF TEST MODES ................................................................... 8 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ................................. 9 3.3 DESCRIPTION OF SUPPORT UNITS ........................................................... 11 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST .......................................................... 11 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 12 4. TEST TYPES AND RESULTS .................................................................................................. 13 4.1 RADIATED EMISSION AND BANDEDGE MEASUREMENT ......................... 13 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT .................... 13 4.1.2 TEST INSTRUMENTS .................................................................................................. 14 4.1.3 TEST PROCEDURES ................................................................................................... 15 4.1.4 DEVIATION FROM TEST STANDARD ......................................................................... 15 4.1.5 TEST SETUP ................................................................................................................ 16 4.1.6 EUT OPERATING CONDITIONS ................................................................................. 16 4.1.7 TEST RESULTS ............................................................................................................ 17 4.2 CONDUCTED EMISSION MEASUREMENT ................................................. 30 4.2.1 LIMITS OF CONDUCTED EMISSION MEASUREMENT ............................................. 30 4.2.2 TEST INSTRUMENTS .................................................................................................. 30 4.2.3 TEST PROCEDURES ................................................................................................... 31 4.2.4 DEVIATION FROM TEST STANDARD ......................................................................... 31 4.2.5 TEST SETUP ................................................................................................................ 32 4.2.6 EUT OPERATING CONDITIONS ................................................................................. 32 4.2.7 TEST RESULTS ............................................................................................................ 33 4.3 6dB BANDWIDTH MEASUREMENT .............................................................. 35 4.3.1 LIMITS OF 6dB BANDWIDTH MEASUREMENT ......................................................... 35 4.3.2 TEST SETUP ................................................................................................................ 35 4.3.3 TEST INSTRUMENTS .................................................................................................. 35 4.3.4 TEST PROCEDURE ..................................................................................................... 35 4.3.5 DEVIATION FROM TEST STANDARD ......................................................................... 35 4.3.6 EUT OPERATING CONDITIONS .........…

Text truncated - open the document above for the full version.

1 PHOTOGRAPHS OF THE TEST CONFIGURATION CONDUCTED EMISSION TEST 2 RADIATED EMISSION TEST