2AA3I-1PXWRLSCHRGWIRELESS CHARGER

Regulatory Compliance Statements / Erklärungen zur Einhaltung von Vorschriften / Déclarations de conformité réglementaires / Dichiarazioni di Conformità Normativa / Declaraciones de Conformidad Reglamentaria / Verklaringen van naleving van regelgeving / 規制遵守声明 Revision: April 30, 2026 EN: Safety Measures: •If product has an exposed circuit board, do not touch the product under power. •If Class 1 Laser Product, Laser radiation is present when the system is open. •Wiring terminations should not be made with the product and/or electric lines under power. •Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. •Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. •Overloaded or tightly bundled cables or devices can overheat and pose a burn hazard. Ensure proper ventilation and avoid bundling power cords and devices. EU CE RoHS Environmental: StarTech.com hereby declares that this product complies with the Restriction of Hazardous Substances (RoHS) directive of the European Parliament and the Commission Delegated Directive (EU). A copy of the EU Declaration of Conformity is available at www.startech.com/support by searching for the product. EU REACH Declaration: This product complies with the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) Regulation (EC) of the European Parliament and the Council. The product does not contain any of the Substances of Very High Concern (SVHC) or Restricted Substances above the threshold values declared by the European Agency for Chemicals (ECHA) on their website's documented/maintained lists. UK REACH Declaration: This product complies with the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) Regulation (EC) of the UK Health and Safety Executive (HSE), and the UK Department for Environment, Food and Rural Affairs (DEFRA). The product does not contain any of the Substances of Very High Concern (SVHC) or Restricted Substances above the threshold values declared by the European Agency for Chemicals (ECHA) on their website's documented/maintained lists. Radiation Exposure Statement: FCC ID: 2AA3I-1PXWRLSCHRG This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Radio Frequency Exposure General Statement: StarTech.com products have been tested and meet the applicable limits for Radio Frequency (RF) exposure for the country in which they are intended to operate. Products intended for use 20cm (8 inches) or more from the body meet the Maximum Permissive Exposure (MPE) limits. Products intended for use less than 20cm (8 inches) from the body meet the Specific Absorption Rate (SAR) limits. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries following the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries following the Council of the European Union limit. Radiation Exposure Statement: IC: 11232A-1PXWRLSCHRG HVIN: 1PB-WIRELESS-CHARGER This equipment complies with ISED RSS-102 radiation exposure limit set forth for an uncontrolled environment. DE: Sicherheitsvorkehrungen: •Wenn das Produkt eine freiliegende Leiterplatte hat, berühren Sie das Produkt nicht, solange es unter Strom steht. •Wenn es sich um ein Laserprodukt der Klasse 1 handelt. Bei geöffnetem System ist Laserstrahlung vorhanden. •Verdrahtungsabschlüsse sollten nicht mit dem Produkt und/oder elektrischen Leitungen unter Strom vorgenommen werden. •Die Installation und/oder Montage des Produkts sollte von einem zertifizierten Fachmann gemäß den örtlichen Sicherheits- und Bauvorschriften durchgeführt werden. •Kabel (einschließlich Strom- und Ladekabel) sollten so verlegt und geführt werden, dass keine elektrischen Gefahren, Stolperfallen oder Sicherheitsrisiken entstehen. •Überlastete oder eng gebündelte Kabel oder Geräte können überhitzen und eine Verbrennungsgefahr darstellen. Sorgen Sie für eine ausreichende Belüftung und vermeiden Sie das Bündeln von kabeln und Geräten. EU CE RoHS Umwelt: StarTech.com erklärt hiermit, dass dieses Produkt der RoHS-Richtlinie (Restriction of Hazardous Substances) des Europäischen Parlaments und der Delegierten Richtlinie der Kommission (EU) entspricht. Eine Kopie der EU-Konformitätserklärung finden Sie unter www.startech.com/support, indem Sie nach dem Produkt suchen. EU-REACH-Deklaration: Dieses Produkt entspricht der Verordnung (EG) des Europäischen Parlaments und des Rates zur Registrierung, Bewertung, Zulassung und Beschränkung chemischer Stoffe (REACH). Das Produkt enthält keine besonders besorgniserregenden Stoffe (SVHC) oder Stoffe, die Beschränkungen unterliegen, oberhalb der Schwellenwerte, die von der Europäischen Chemikalienagentur (ECHA) auf den dokumentierten/gepflegten Listen ihrer Website angegeben werden. FR: Mesures de Sécurité: •Si le produit a un circuit imprimé exposé, ne pas toucher le produit sous tension. •S'il s'agit d'un produit laser de classe 1, le rayonnement laser est présent lorsque le système est ouvert. •Les terminaisons de câblage ne doivent pas être effectuées avec le produit et/ou les lignes électriques sous tension. •L'installation et/ou le montage du produit doivent être effectués par un professionnel certifié, conformément aux directives locales en matière de sécurité et de construction. •Les câbles (y compris les câbles d'alimentation et de charge) doivent être placés et acheminés de manière à ne pas créer de risques électriques, de trébuchement ou de sécurité. •Des câbles ou des appareils surchargés ou étroitement regroupés peuvent surchauffer et présenter un risque de brûlure. Veillez à…

Text truncated - open the document above for the full version.

Regulatory Compliance Statements / Erklärungen zur Einhaltung von Vorschriften / Déclarations de conformité réglementaires / Dichiarazioni di Conformità Normativa / Declaraciones de Conformidad Reglamentaria / Verklaringen van naleving van regelgeving / 規制遵守声明 Revision: May 1, 2026 EN: Safety Measures: •If product has an exposed circuit board, do not touch the product under power. •If Class 1 Laser Product, Laser radiation is present when the system is open. •Wiring terminations should not be made with the product and/or electric lines under power. •Product installation and/or mounting should be completed by a certified professional as per the local safety and building code guidelines. •Cables (including power and charging cables) should be placed and routed to avoid creating electric, tripping or safety hazards. •Overloaded or tightly bundled cables or devices can overheat and pose a burn hazard. Ensure proper ventilation and avoid bundling power cords and devices. EU CE RoHS Environmental: StarTech.com hereby declares that this product complies with the Restriction of Hazardous Substances (RoHS) directive of the European Parliament and the Commission Delegated Directive (EU). A copy of the EU Declaration of Conformity is available at www.startech.com/support by searching for the product. EU REACH Declaration: This product complies with the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) Regulation (EC) of the European Parliament and the Council. The product does not contain any of the Substances of Very High Concern (SVHC) or Restricted Substances above the threshold values declared by the European Agency for Chemicals (ECHA) on their website's documented/maintained lists. UK REACH Declaration: This product complies with the Registration, Evaluation, Authorisation, and Restriction of Chemicals (REACH) Regulation (EC) of the UK Health and Safety Executive (HSE), and the UK Department for Environment, Food and Rural Affairs (DEFRA). The product does not contain any of the Substances of Very High Concern (SVHC) or Restricted Substances above the threshold values declared by the European Agency for Chemicals (ECHA) on their website's documented/maintained lists. Radiation Exposure Statement: FCC ID: 2AA3I-1PXWRLSCHRG This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. Radio Frequency Exposure General Statement: StarTech.com products have been tested and meet the applicable limits for Radio Frequency (RF) exposure for the country in which they are intended to operate. Products intended for use 20cm (8 inches) or more from the body meet the Maximum Permissive Exposure (MPE) limits. Products intended for use less than 20cm (8 inches) from the body meet the Specific Absorption Rate (SAR) limits. Specific Absorption Rate (SAR) refers to the rate at which the body absorbs RF energy. The SAR limits are 1.6 Watts per kilogram (over a volume containing a mass of 1 gram of tissue) in countries following the United States FCC limit and 2.0 W/kg (averaged over 10 grams of tissue) in countries following the Council of the European Union limit. Radiation Exposure Statement: IC: 11232A-1PXWRLSCHRG HVIN: 1PW-WIRELESS-CHARGER This equipment complies with ISED RSS-102 radiation exposure limit set forth for an uncontrolled environment. DE: Sicherheitsvorkehrungen: •Wenn das Produkt eine freiliegende Leiterplatte hat, berühren Sie das Produkt nicht, solange es unter Strom steht. •Wenn es sich um ein Laserprodukt der Klasse 1 handelt. Bei geöffnetem System ist Laserstrahlung vorhanden. •Verdrahtungsabschlüsse sollten nicht mit dem Produkt und/oder elektrischen Leitungen unter Strom vorgenommen werden. •Die Installation und/oder Montage des Produkts sollte von einem zertifizierten Fachmann gemäß den örtlichen Sicherheits- und Bauvorschriften durchgeführt werden. •Kabel (einschließlich Strom- und Ladekabel) sollten so verlegt und geführt werden, dass keine elektrischen Gefahren, Stolperfallen oder Sicherheitsrisiken entstehen. •Überlastete oder eng gebündelte Kabel oder Geräte können überhitzen und eine Verbrennungsgefahr darstellen. Sorgen Sie für eine ausreichende Belüftung und vermeiden Sie das Bündeln von kabeln und Geräten. EU CE RoHS Umwelt: StarTech.com erklärt hiermit, dass dieses Produkt der RoHS-Richtlinie (Restriction of Hazardous Substances) des Europäischen Parlaments und der Delegierten Richtlinie der Kommission (EU) entspricht. Eine Kopie der EU-Konformitätserklärung finden Sie unter www.startech.com/support, indem Sie nach dem Produkt suchen. EU-REACH-Deklaration: Dieses Produkt entspricht der Verordnung (EG) des Europäischen Parlaments und des Rates zur Registrierung, Bewertung, Zulassung und Beschränkung chemischer Stoffe (REACH). Das Produkt enthält keine besonders besorgniserregenden Stoffe (SVHC) oder Stoffe, die Beschränkungen unterliegen, oberhalb der Schwellenwerte, die von der Europäischen Chemikalienagentur (ECHA) auf den dokumentierten/gepflegten Listen ihrer Website angegeben werden. FR: Mesures de Sécurité: •Si le produit a un circuit imprimé exposé, ne pas toucher le produit sous tension. •S'il s'agit d'un produit laser de classe 1, le rayonnement laser est présent lorsque le système est ouvert. •Les terminaisons de câblage ne doivent pas être effectuées avec le produit et/ou les lignes électriques sous tension. •L'installation et/ou le montage du produit doivent être effectués par un professionnel certifié, conformément aux directives locales en matière de sécurité et de construction. •Les câbles (y compris les câbles d'alimentation et de charge) doivent être placés et acheminés de manière à ne pas créer de risques électriques, de trébuchement ou de sécurité. •Des câbles ou des appareils surchargés ou étroitement regroupés peuvent surchauffer et présenter un risque de brûlure. Veillez à un…

Text truncated - open the document above for the full version.

StarTech.com Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-23 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AA3I-1PXWRLSCHRG StarTech.com Ltd. certifies that the equipment for which authorization is sought is not “covered” equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. StarTech.com Ltd. certifies that the equipment for which authorization is sought does not include cybersecurity or anti-virus software produced or provided by Kaspersky Lab, Inc. or any of its successors and assignees, including equipment with integrated Kaspersky Lab, Inc. (or any of its successors and assignees) cybersecurity or anti-virus software pursuant to DA-24-886 and KDB 986446 D01 Covered Equipment Guidance section B(2a). Device is inherently compliant based on hardware limitations or software controls. or A Software Bill of Materials (SBOM) is provided to the TCB for review, and The end-user or third parties cannot install additional software on this device. Sincerely, Signed: Printed name: Nirav Gandhi Title: Manager Company Name: StarTech.com Ltd. Date:6/23/2026 StarTech.com Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2026-06-23 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AA3I-1PXWRLSCHRG StarTech.com Ltd. certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing “covered” equipment. Sincerely, Signed: Printed name: Nirav Gandhi Title: Manager Company Name: StarTech.com Ltd. Date:6/23/2026

StarTech.com Ltd. Date：6/23/2026 Product Model Number: 1PW-WIRELESS-CHARGER, 1PB-WIRELESS- CHARGER FCC ID：2AA3I-1PXWRLSCHRG To whom it may concern, Re: Product Certification Representative Authorization Letter We authorize QAI Laboratories Ltd. 3980 North Fraser Way, Burnaby B.C. Canada V5J 5K5 to act on our behalf on all matters concerning the above named equipment. This shall include the following:  Testing  Approval applications and procedures We declare that QAI Laboratories Ltd. is allowed to forward all information related to the approval project to the applied certification body and to the notification entities and to discuss any issues concerning the approval application. Any and all acts carried out by QAI Laboratories Ltd. on our behalf shall have the same effect as acts of our own. By: Contact Listed on FCC Wesbite Printed name: Nirav Gandhi Title: Manager Email: [email protected] Telephone: 519 455 9675 On behalf of: StarTech.com Ltd.

StarTech.com Ltd. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: June 23, 2026 Subject; Request for Confidentiality FCC ID: 2AA3I-1PXWRLSCHRG To Whom It May Concern, Pursuant to the provisions of the Commission’s rules Title 47 Sections §0.457 and §0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR §2.803 and the importation rules in Title 47 CFR §2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s); External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature: Name: Nirav Gandhi Title: Manager

StarTech.com Ltd. I, the undersigned, Nirav Gandhi: The following models have the same technical construction including circuit diagram, PCB Layout, components and component layout, all electrical construction and mechanical construction, except the different model name and colors. 1) Model No.: 1PW-WIRELESS-CHARGER 2) Model No.: 1PB-WIRELESS-CHARGER FCC ID: 2AA3I-1PXWRLSCHRG Sincerely, Client’s signature : Client’s name / title : Nirav Gandhi / Manager Contact information / address : 45 Artisans Crescent London, Ontario N5V 5E9, Canada Telephone: 519 455 9675 Fax No.: 519 455 9425

External Photos M/N: 1PW-WIRELESS-CHARGER External Photos M/N: 1PW-WIRELESS-CHARGER External Photos M/N: 1PW-WIRELESS-CHARGER External Photos M/N: 1PB-WIRELESS-CHARGER External Photos M/N: 1PB-WIRELESS-CHARGER External Photos M/N: 1PB-WIRELESS-CHARGER

7mm 13mm White

7mm 13mm Black

Internal Photos M/N: 1PW-WIRELESS-CHARGER Internal Photos M/N: 1PW-WIRELESS-CHARGER Coil Antenna Internal Photos M/N: 1PW-WIRELESS-CHARGER Internal Photos M/N: 1PB-WIRELESS-CHARGER Internal Photos M/N: 1PB-WIRELESS-CHARGER Coil Antenna Internal Photos M/N: 1PB-WIRELESS-CHARGER

Page 1 of 8 Report No. ESTE-R2605362 FCC 47 CFR MPE REPORT StarTech.com Ltd. WIRELESS CHARGER Model Number: 1PW-WIRELESS-CHARGER Additional Model: 1PB-WIRELESS-CHARGER FCC ID: 2AA3I-1PXWRLSCHRG Applicant: StarTech.com Ltd. Address: 45 Artisans Crescent London, Ontario N5V 5E9, Canada Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2605362 Date of Test: Mar. 10, 2026 to May 23, 2026 Date of Report: May 29, 2026 Page 3 of 8 Report No. ESTE-R2605362 1. Summary of test 1.1. Summary of test result No. Description of Test Item FCC Standard Section Results 1 Maximum Permissible Exposure Part 1.1307(b)&1.1310 PASS 1.2. Test Mode 1.3. Test Equipment List Equipment Manufacturer Model No. Serial No. Last Cal. Next Cal. Electric and Magnetic Field Probe-Analyzer Narda S.T.S./PMM EHP-200A EST-E106 June 10,25 June 9,26 Test Software Narda EHP200-TS Rel 1.92 N/A N/A Note: Test uncertainty: ±1.62 dB (H-field);±1.64 dB (E-field) at a level of confidence of 95%. 1.4. Assistant equipment used for test Item Equipment Brand Model Name/Type No. FCC ID Series No. A Adapter - - - - B Wireless load - YBZ V.3.1 - - Note: Don't configuration adapter when it sales on the market, The adapter provided by the laboratory. Item Shielded Type Ferrite Core Length Model Name/Type No. Note 1 NO NO 1.0m - DC Cable Test Item Test Mode Maximum Permissible Exposure Wireless Charging with 5W Wireless Charging with 7.5W Wireless Charging with 10W Wireless Charging with 15W Wireless Charging with 25W Note: All modes have been tested. The report only reflects the worst case of full load test data. Page 4 of 8 Report No. ESTE-R2605362 2. Maximum Permissible Exposure 2.1. Limit Limits for Maximum Permissible Exposure (MPE) Frequency range (MHz) Electric field strength (V/m) Magnetic field strength (A/m) Power density (mW/cm2) Averaging time (minutes) (A) Limits for Occupational/Controlled Exposure 0.3-3.0 614 1.63 *100 6 3.0-30 1842/f 4.89/f *900/f 2 6 30-300 61.4 0.163 1.0 6 300-1,500 f/300 6 1,500-100,000 5 6 (B) Limits for General Population/Uncontrolled Exposure 0.3-1.34 614 1.63 *100 30 1.34-30 824/f 2.19/f *180/f 2 30 30-300 27.5 0.073 0.2 30 300-1,500 f/1500 30 1,500-100,000 1.0 30 Note:f = frequency in MHz * = Plane-wave equivalent power density. 2.2. Test Setup Page 5 of 8 Report No. ESTE-R2605362 2.3. Test Procedure a. The test was performed on table in anechoic chamber. b. The probe was placed at 20 cm surrounding, for test setup. c. The highest emission level was recorded and compared with limit as soon as measurement of each point; A, B, C, D, E were completed. 2.4. Test Result for Test setup: E-field strength Frequency range 110.5 to 205 kHz 360kHz Test Mode 5W 7.5W 10W 15W 25W Position A(V/m) 1.483 1.438 1.494 1.535 1.541 Position B(V/m) 1.778 1.794 1.610 1.846 1.687 Position C(V/m) 1.835 1.584 1.574 1.784 1.764 Position D(V/m) 1.552 1.732 1.498 1.675 1.589 Position E(V/m) 2.031 2.072 1.989 2.160 2.146 Limits (V/m) 614 H-field strength Frequency range 110.5 to 205 kHz 360kHz Test Mode 5W 7.5W 10W 15W 25W Position A(A/m) 0.042 0.047 0.044 0.042 0.045 Position B(A/m) 0.047 0.042 0.040 0.043 0.047 Position C(A/m) 0.042 0.044 0.045 0.046 0.044 Position D(A/m) 0.041 0.042 0.044 0.044 0.048 Position E(A/m) 0.051 0.049 0.048 0.053 0.050 Limits (A/m) 1.630 Page 6 of 8 Report No. ESTE-R2605362 3. Test photo Position A Position B Page 7 of 8 Report No. ESTE-R2605362 Position C Position D Page 8 of 8 Report No. ESTE-R2605362 Position E End of Test Report

DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:No.138,GaolongWestRoad, GaobuTown,DongguanCity,GuangdongProvince Tel：86-076986018114Fax：86-076986015646 Http://www.jzcoil.com文件编号FilNo:KC-JZ-09-008 1 DongguanJinzanIntelligentTechnologyCo.,Ltd. ProductSpecificationSheet PRODUCTSPECIFICATION PREPAREDBYMERCHANDISER ENGINEER CHECKEDBY APPROVEDBY Wang Zhenwei DongguanHainengElectronicsCo.,Ltd. CUSTOMER:____________________________________________________________________ H281410000357 CUSTP/N:_________________________________________________________________ J30-000758-001 KCP/N:____________________________________________________________________ 21.46*39.3*0.08*80P*11TS*7MM DESE: 2025.09.19 DATE:____________________________________________________________________ A.2 VERSION:____________________________________________________________________ ACCEPTANCESTAMP DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:No.138,GaolongWestRoad,GaobuTown,DongguanCity,GuangdongProvince Tel ： 86-076986018114Fax ： 86-076986015646 Http://www.jzcoil.comFilNo:KC-JZ-09-008 H281410000357 21.46*39.3*0.08*80P*11TS*7MM PREPAREDBYENGINEERCHECKEDBY 2 Rev.BeforeChange DESCRIPTION(ContentOrReason ForChanged) DateRevisor A.0--InitialRelease2025/07/24 HuYaoyao A.1-- Add:Smallrectangularspongefoam, 4*3.8*1.0H,double-sidedadhesive 2025/09/04 Wang Zhenwei A.2G：2.2MAXG：2.4MAX2025/09/19 Wang Zhenwei DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:No.138,GaolongWestRoad,GaobuTown,DongguanCity,GuangdongProvince Tel ： 86-076986018114Fax ： 86-076986015646 Http://www.jzcoil.comFilNo:KC-JZ-09-008 H281410000357 21.46*39.3*0.08*80P*11TS*7MM PREPAREDBYENGINEERCHECKEDBY 3 1.OVERALLDIMENSIONSOFPRODUCTS: Uni):mm) PS:1.(E)、（H）Thelengthoftheouterleadofthemagneticchip）;2.（Thethicknessismeasured at2.05MAXinthemiddlearea,excludingreleasepaper,andthehighestpointdoesnotexceed 2.4MAX）.3.（Outletfixingpoint） TurnsWireDia. Wdg.Type Spred/Close Wdg.Direction Intersect Yes/Not Coil Positive/AntiPaste 11TS 0.08*80P Strandedwire Close （Anticlockwise） YesAnti/-Paste AllmaterialsmustcomplywithROHSstandards 2.ELECTRICALCHARACTERISTICS: ABCDEFGJH(NTC)I 20±0.521.46±0.539.3±0.542.9±0.57±13±12.4MAX1.0±0.17±24±1 DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:No.138,GaolongWestRoad,GaobuTown,DongguanCity,GuangdongProvince Tel ： 86-076986018114Fax ： 86-076986015646 Http://www.jzcoil.comFilNo:KC-JZ-09-008 H281410000357 21.46*39.3*0.08*80P*11TS*7MM PREPAREDBYENGINEERCHECKEDBY 4 TEMPERATURE:25±10°C,RELATIVEHUMIDITY:65±10% NO.ITEM TERMINALSPECIFICATION TESTFREQUENCYTESTEQUIPMENTS 1INDS-F Addamagnettothecoil： 8.4uH±10% 100kHz/1VLCZMETER1062 2DCRS-F Resistancevalue：62mΩMAX /LCZMETER1062 3. BILLOFMATERIAIS: NO.MaterialnameDescriptionMaterialCodeVendorcode 1 wirerod 0.08*80PHotAirTwistedWire JX-2U-F-0025ZY 2 ferrite （G42.9*5.2*0.8Hwithholesand grooves(deepgrooves)） GCP-T-00512LX 3 double-sided tape Rounddouble-sidedadhesivetape 41.3*0.08Hwithoutholesandgrooves withhandtear(CrownDS10G)) SMJ-T-0087 HWD 4 magneticsheetRound20*0.8H,noholes,withgrooves GCP-T-00376 LX 5 double-sided tape Roundordinarydouble-sidedtape18 *0.08,noholesorgrooves,withhand tearfunction） SMJ-T-0010 MYS 6 glueJS-E7202（Thicken）Whiteglue E7202WHZY 7 tin Eco-friendlylead-freesoldering wiretin Lead-free high-temperat uresolder wire XC DONGGUANKIMCHENINDUSTRYINTLLIMITED Address:No.138,GaolongWestRoad,GaobuTown,DongguanCity,GuangdongProvince Tel ： 86-076986018114Fax ： 86-076986015646 Http://www.jzcoil.comFilNo:KC-JZ-09-008 H281410000357 21.46*39.3*0.08*80P*11TS*7MM PREPAREDBYENGINEERCHECKEDBY 5 8 NTCthermistor Enamelledwire0.28red100KB=3950 1%totallength22,solder3±1, matchhead1.3MAX GCP-T-00518/ 9 spongeglue Smallrectangularspongepad,length4* width3.8*height1.0cm,single-sided adhesive SMJ-EVA-0106/

Page 1 of 40 Report No. ESTE-R2605361 FCC PART 15C TEST REPORT FOR CERTIFICATION On Behalf of StarTech.com Ltd. WIRELESS CHARGER Model Number: 1PW-WIRELESS-CHARGER Additional Model: 1PB-WIRELESS-CHARGER FCC ID: 2AA3I-1PXWRLSCHRG Applicant: StarTech.com Ltd. Address: 45 Artisans Crescent London, Ontario N5V 5E9, Canada Prepared By: EST Technology Co., Ltd. Chilingxiang, Qishantou, Santun, Houjie, Dongguan, Guangdong, China Tel: 86-769-83081888-808 Report Number: ESTE-R2605361 Date of Test: Mar. 10, 2026 to May 23, 2026 Date of Report: May 29, 2026 Page 2 of 40 Report No. ESTE-R2605361 TABLE OF CONTENTS Description Page TEST REPORT VERIFICATION .......................................................................................................... 3 1. GENERAL INFORMATION ................................................................................................................ 4 1.1. Description of Device (EUT) ......................................................................................................... 4 2. SUMMARY OF TEST ........................................................................................................................ 5 2.1. Summary of test result .................................................................................................................. 5 2.2. Test Facilities .................................................................................................................................. 6 2.3. Measurement uncertainty ............................................................................................................. 7 2.4. Assistant equipment used for test ............................................................................................... 7 2.5. Block Diagram ................................................................................................................................ 7 2.6. Test Mode ....................................................................................................................................... 8 2.7. Test Equipment List ....................................................................................................................... 9 3. RADIATED EMISSION ................................................................................................................... 10 3.1. Limit ................................................................................................................................................ 10 3.2. Test Setup ..................................................................................................................................... 11 3.3. Spectrum Analyzer Setting ......................................................................................................... 11 3.4. Test Procedure ............................................................................................................................. 12 3.5. Test Result .................................................................................................................................... 13 4. 20DB OCCUPIED BANDWIDTH .................................................................................................... 19 4.1. Limit ................................................................................................................................................ 19 4.2. Test Setup ..................................................................................................................................... 19 4.3. Spectrum Analyzer Setting ......................................................................................................... 19 4.4. Test Procedure ............................................................................................................................. 19 4.5. Test Condition .............................................................................................................................. 19 4.6. Test Result .................................................................................................................................... 20 5. AC POWER LINE CONDUCTED EMISSIONS ................................................................................. 23 5.1. Limit ................................................................................................................................................ 23 5.2. Test Setup ..................................................................................................................................... 23 5.3. Spectrum Analyzer Setting ......................................................................................................... 23 5.4. Test Procedure ............................................................................................................................. 23 5.5. Test Result .................................................................................................................................... 24 6…

Text truncated - open the document above for the full version.