2AA3SMINIBluetooth Speaker

Thanks for choosing our mini bluetooth speaker, for you to use our product, we attached the using instructions, you can know about the introduction, using method from it, pls carefully read the using instructions before using. 1. Notes For the user to use the speaker correctly, to make sure the speaker work well, pls carefully read and follow: A. Please do not throw, avoiding product damage for droping. B. Do not touch benzene, thinner or other chemicals C. Do not near to strong magnetic field, electric field D. Please avoid direct sunlight or heating appliances E. Do not disassemble, repair, alteration F. To avoid danger, do not use the player and headphones when Cycling, driving a car and motorcycle. G. Do not listen to a larger volume, so as to avoid adverse effects on hearing H. Packaging waste, batteries, used electronic products, please handle properly by sorting 2. Features Bluetooth Audio: Bluetooth 3.0+EDR, the biggest transmittion distance is 10m. Break-point Memory: Automatic memory last exit tracks, volume Built-in Battery: Built-in rechargeable lithium battery, environmental protection, energy saving, practical 3. How to play music The machine automatically detects identify external boot device, boot into Bluetooth mode 4. Product keys, jack functional definition [USB]: power charging jack, you can use this machine distribution dedicated USB power cable connected to the computer's USB or charger interface for charging. 5. Indicator Description A. Work light: boot two alternately flashing blue light indicates that the machine is working properly, and looking around the paired device. When the two LEDs flash simultaneously and both appear off, it means the machine has been successfully connected to the associated paired device. B. Charge indicator: Plug in the USB cable connecting the machine buttons will appear around a red indicator light, said it is charging, the charging period of time when the red light turns blue lights indicate charging has been completed. 6. Bluetooth connection method A, the boot will issue a "Gululu ..." bang, two blue LED flash alternately. B, open mobile devices (cell phones, computers, etc.) of the Bluetooth function, search for Bluetooth devices C, manual clicks, the device automatically paired, connection, the connection is successful will issue a "grunt" sound, while two alternately flashing blue lights by switching to synchronous flashing. D, have been successfully paired devices, open the opportunity to automatically connect to the next. Note: Enter Bluetooth mode within 10 seconds, the Bluetooth device will automatically find and pair connection 10 seconds after going through the manual connection. 7. Charge Method Plug the power cord into the unit's [USB] jack and the other end of the USB into the computer's USB port, or connect a standard 5V 500mA charging interface, the charge of "Red Light", full of "Blue Light". The machine built overcharge protection circuit can be connected to a computer or charger prolonged use, approximately 2 hours can be filled with battery; battery life every time the volume due to the use of time varies. 8. Low battery When the battery low occurs, the system will automatically shut down, then please charge; if the machine is not used for a long time, at least once a month charge, you can protect the battery to extend battery life. 9. Troubleshooting 1, Q: boot automatically shut down? A: battery, please charge, recommended charging two hours before use. 2, Q: Play flash blue lights have been shut down or restart automatically after? A: battery, please charge, recommended charging two hours before use. 3, Q: can not be charged? A: Please use the unit charge distribution line, and make sure the USB port is connected voltage is normal. 4, Q: charging red light does not light or red light is dark? A: Normal. If the battery is fully charged or voltage block is full, the charging red light will not light or very dark, in short, the more battery power is low, the brighter red when charging. 5, Q: No sound speakers? A: determine the playing status, and adjusted to the appropriate volume. 6, Q: Bluetooth will not automatically connect? A: 1, only paired devices will connect automatically. 2, if the speaker only after 10 seconds into the open Bluetooth Bluetooth devices, the speaker does not connect automatically. 7, Q: Bluetooth no sound? A: 1, make sure that Bluetooth is connected successfully. 2, the volume of the Bluetooth device is turned on. 8, Q: No function or function keys wrong? A: powercycle. 10. Technical Specifications Output power: 3W * 1 Operating voltage: 3.7V Frequency Response: 100Hz-18KHz Ratio: ≥ 80dB Distortion: <0.5% Audio input: Bluetooth Speaker Unit: 31mm, double magnetism, 16 core, 4Ω Input Power: Built-in polymer rechargeable battery 300mAh 3.7V or external DC5V Adjusting: buttons adjust Weight: about 100g 11. Packing Accessories Music Box 1 sets Data line 1 piece Manual 1 piece Warranty card 1 piece Federal Communications Commission (FCC) Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generate, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:  Reorient or relocate the receiving antenna.  Increase the separation between the equipment and receiver.  Connect the equipment into an outlet on a circuit different fro…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 4.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (current) 3.0 4.0 May-23-2014 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 4.0 Shenzhen Vogoge Technology CO., Ltd ___________________________________________________________________ Date:June-8-2014 To: SIEMIC, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Shenzhen Vogoge Technology CO., Ltd CO.,Ltd to act as a Certification Body for certifying for the following project(s): Product Name: Bluetooth Speaker Model name: Mini Speaker, Jet Speaker FCC ID: 2AA3SMINI Brand: N/A Sincerely Client’s signature ： Client’s name / title ： Hongsheng Liu/Manager Contact information / address ： Shenzhen Vogoge Technology CO., Ltd Unit201, 2th Floor, Building B, 8th, Chong Qing Road. hereby authorize SIEMIC, Inc. to act as a

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 3.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (current) 2.0 3.0 Jan-31-2012 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 3.0 Shenzhen Vogoge Technology CO., Ltd ___________________________________________________________________ Date: July 8,2014 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AA3SMINI We hereby request confidential treatment of information accompanying this application as outlined below: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to Section 0.457 & 0.459 of the Rules, disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature ： Client’s name / title ： Hongsheng Liu/Manager Contact information / address ： Shenzhen Vogoge Technology CO., Ltd Unit201, 2th Floor, Building B, 8th, Chong Qing Road.

Shenzhen Vogoge Technology CO., Ltd. Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. ----------------------------------------------------------------------------------------------------------------------------------- Declaration We Name: Shenzhen Vogoge Technology CO., Ltd. Address: Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. Manufacturer: Shenzhen Vogoge Technology CO., Ltd. Address: Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. The Bluetooth Speaker FCC ID: 2AA3SMINI, the USB Port just for charge function.

Shenzhen Vogoge Technology CO., Ltd. Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. ----------------------------------------------------------------------------------------------------------------------------------- Declaration of Authorization We Name: Shenzhen Vogoge Technology CO., Ltd. Address: Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. Declare that: Name Representative of agent: Wu Jian Agent Company name: MRT Technology (Suzhou) Co., Ltd Address: D8 Building, Youxin Industrial Park, No.2 Tian'edang Rd., Wuzhong Economic Development Zone, City: Suzhou Country China is authorized to apply for Certification of the following product(s): Product description:Bluetooth Speaker FCC ID:2AA3SMINI Model:Mini Speaker, Jet Speaker Brand:N/A on our behalf. --------------------------------------------------- Signature: Liu Hongsheng, Manager Date: 2014-07-08

Shenzhen Vogoge Technology CO., Ltd. Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. ----------------------------------------------------------------------------------------------------------------------------------- Declaration We Name: Shenzhen Vogoge Technology CO., Ltd. Address: Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. Manufacturer: Shenzhen Vogoge Technology CO., Ltd. Address: Unit 201, 2th Floor, Building B, 8th Chong Qing Road, Fu Yong, Bao'an District, Shenzhen, China. Declare, Product description: Bluetooth Speaker FCC ID: 2AA3SMINI Model: Mini Speaker, Jet Speaker Have no difference in interior, circuitry and layout. The only difference for marketing reasons are the model(s) names.

External Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo

Label Label Location Mini Speaker FCC ID: 2AA3SMINI

Internal Photo (1) EUT Photo (2) EUT Photo (3) EUT Photo (4) EUT Photo (5) EUT Photo (6) EUT Photo (7) EUT Photo (8) EUT Photo

MRT Technology (Suzhou) Co., Ltd Report No.: 1407RSU01202 Phone: +86-512-66308358 Report Version: V01 Fax: +86-512-66308368 Issue Date: 07-15-2014 Web: www.mrt-cert.com FCC ID: 2AA3SMINI Page Number: 1 of 5 RF Exposure Evaluation Declaration FCC ID: 2AA3SMINI APPLICANT: Shenzhen Vogoge Technology CO., Ltd. Application Type: Certification Product: Bluetooth Speaker Model No.: Mini Speaker, Jet Speaker FCC Classification: FCC Part 15 Spread Spectrum Transmitter(DSS) Test Date: July 08 ~ 14, 2014 Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1407RSU01202 FCC ID: 2AA3SMINI Page Number: 2 of 5 Revision History Report No. Version Description Issue Date 1407RSU01202 Rev. 01 Initial report 07-15-2014 Report No.: 1407RSU01202 FCC ID: 2AA3SMINI Page Number: 3 of 5 1. RF Exposure Evaluation 1.1. Limits SAR Test Exclusion Thresholds for 100 MHz – 6 GHz and ≤ 50 mm Approximate SAR Test Exclusion Power Thresholds at Selected Frequencies and Test Separation Distances are illustrated in the following Table. The equation and threshold in Note 1 must be applied to determine SAR test exclusion. MHz 5 10 15 20 25 mm 150 39 77 116 155 194 SAR Test Exclusion Threshold (mW) 300 27 55 82 110 137 450 22 45 67 89 112 835 16 33 49 66 82 900 16 32 47 63 79 1500 12 24 37 49 61 1900 11 22 33 44 54 2450 10 19 29 38 48 3600 8 16 24 32 40 5200 7 13 20 26 33 5400 6 13 19 26 32 5800 6 12 19 25 31 MHz 30 35 40 45 50 mm 150 232 271 310 349 387 SAR Test Exclusion Threshold (mW) 300 164 192 219 246 274 450 134 157 179 201 224 835 98 115 131 148 164 900 95 111 126 142 158 1500 73 86 98 110 122 1900 65 76 87 98 109 2450 57 67 77 86 96 3600 47 55 63 71 79 5200 39 46 53 59 66 5400 39 45 52 58 65 5800 37 44 50 56 62 Report No.: 1407RSU01202 FCC ID: 2AA3SMINI Page Number: 4 of 5 Note :The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] * [√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where  f(GHz) is the RF channel transmit frequency in GHz  Power and distance are rounded to the nearest mW and mm before calculation  The result is rounded to one decimal place for comparison  3.0 and 7.5 are referred to as the numeric thresholds in the step 2 below The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm according to 5) in section 4.1 is applied to determine SAR test exclusion. 1.2. Test Procedure Software provided by client enabled the EUT to transmit and receive data at lowest, middle and highest channel individually. The temperature and related humidity: 18°C and 78% RH. Report No.: 1407RSU01202 FCC ID: 2AA3SMINI Page Number: 5 of 5 1.3. Test Result of RF Exposure Evaluation Product Bluetooth Speaker Test Item RF Exposure Evaluation Antenna Gain: The maximum Gain measured in fully anechoic chamber is 0dBi for 2.4GHz in logarithm scale. Output Power into Antenna: Test Mode Frequency Band (MHz) Maximum output power to antenna (mW) SAR Test Exclusion Threshold (mW) Bluetooth 2402~2480 0.661 10 Per FCC KDB 447498 D01v05r02, the SAR exclusion threshold for distances<50mm is defined by the following equation: Based on the maximum conducted power of Bluetooth and the antenna to use separation distance, Bluetooth SAR was not required; [(0.661mW/5)* √2.480] = 0.21 < 3.0. Note: When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. The End

MRT Technology (Suzhou) Co., Ltd Report No.: 1407RSU01201 Phone: +86-512-66308358 Report Version: V04 Fax: +86-512-66308368 Issue Date: 07-22-2014 Web: www.mrt-cert.com FCC ID: 2AA3SMINI Page Number: 1 of 71 FCC ID: 2AA3SMINI APPLICANT: Shenzhen Vogoge Technology CO., Ltd. Application Type: Certification Product: Bluetooth Speaker Model No.: Mini Speaker, Jet Speaker FCC Classification: FCC Part 15 Spread Spectrum Transmitter(DSS) FCC Rule Part(s): Part 15.247 Test Procedure(s): ANSI C63.10-2009, DA 00-705 Test Date: July 08 ~ 14, 2014 MEASUREMENT REPORT FCC PART 15.247 Bluetooth Reviewed By : ( Robin Wu ) Approved By : ( Marlin Chen ) The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI C63.10-2009 and DA 00-705. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. Report No.: 1407RSU01201 FCC ID: 2AA3SMINI Page Number: 2 of 71 Revision History Report No. Version Description Issue Date 1407RSU01201 Rev. 01 Initial report 07-15-2014 1407RSU01201 Rev. 02 Corrected the RE below 1 G Detector 07-18-2014 1407RSU01201 Rev. 03 Corrected the output power Limit 07-21-2014 1407RSU01201 Rev. 04 Added the environmental condition 07-22-2014 Report No.: 1407RSU01201 FCC ID: 2AA3SMINI Page Number: 3 of 71 CONTENTS Description Page 1. INTRODUCTION ........................................................................................................................ 7 1.1. Scope .............................................................................................................................. 7 1.2. MRT Test Location .......................................................................................................... 7 2. PRODUCT INFORMATION ........................................................................................................ 8 2.1. Equipment Description .................................................................................................... 8 2.2. Frequency / Channel Opreation ...................................................................................... 9 2.3. Pseudorandom Frequency Hopping Sequence ............................................................ 10 2.4. Device Capabilities ........................................................................................................ 10 2.5. Test Configuration ......................................................................................................... 10 2.6. Test Software ................................................................................................................ 10 2.7. Description of Support Units .......................................................................................... 11 2.8. EMI Suppression Device(s)/Modifications ..................................................................... 11 2.9. Test environmental condition ........................................................................................ 11 2.10. Labeling Requirements ................................................................................................. 11 3. DESCRIPTION OF TEST ......................................................................................................... 12 3.1. Evaluation Procedure .................................................................................................... 12 3.2. AC Line Conducted Emissions ...................................................................................... 12 3.3. Radiated Emissions ....................................................................................................... 13 4. ANTENNA REQUIREMENTS .................................................................................................. 14 5. TEST EQUIPMENT CALIBRATION DATA .............................................................................. 15 6. MEASUREMENT UNCERTAINTY ........................................................................................... 16 7. TEST RESULT ......................................................................................................................... 17 7.1. Summary ....................................................................................................................... 17 7.2. 20dB Bandwidth Measurement ..................................................................................... 18 7.2.1. Test Limit ................................................................................................................... 18 7.2.2. Te s t Procedure used ................................................................................................. 18 7.2.3. Te s t Setting ................................................................................................................ 18 7.2.4. Te s t Setup ................................................................................................................. 19 7.2.5. Te s t Result ................................................................................................................. 20 7.3. Output Power Measurement ......................................................................................... 23 7.3.1. Test Limit ................................................................................................................... 23 7.3.2. Te s t Procedure Used ................................................................................................. 23 7.3.3. Te s t Setting ................................................................................................................ 23 Report No.: 1407RSU01201 FCC ID: 2AA3SMINI Page Number: 4 of 71 7.3.4. Te s t Setup .........................................…

Text truncated - open the document above for the full version.

Test Setup Photo Description: Front view of Conducted Emission Test Setup Description: Back view of Conducted Emission Test Setup Description: Radiated Emission Test Setup for 9kHz ~ 30MHz Description: Radiated Emission Test Setup for 30MHz ~ 1GHz Description: Radiated Emission Test Setup for 1GHz ~ 18GHz Description: Radiated Emission Test Setup for 18GHz ~ 25GHz