2AA9TTHD603QC0001OTT BOX

THD603QC Set-top box 1. Safety............................................................................................................................ 2. Appearance.................................................................................................................. 3. Rear Panel Connection................................................................................................ 4. Remote......................................................................................................................... 5 First Time Set-Up.......................................................................................................... 6. Network Settings.......................................................................................................... 6.1 Available Networks and Checking Current Network Status........................................ 6.2 Connecting to Cable Network..................................................................................... 6.3 Connecting to WiFi..................................................................................................... 7. Video Settings............................................................................................................... 7.1 Available Video Interfaces.......................................................................................... 7.2 Screen size settings................................................................................................... 8 Specification.................................................................................................................. Contents 1 2 3 5 7 8 8 8 8 10 10 10 12 ! 1 1 Safety End-user Agreement Please read this Agreement carefully before operating, and guarantee that: 1. Do not disassemble this product without authorization; 2. Do not read or refresh the firmware through non-normal channels; 3. Do not perform reverse-engineering or disassembling to any software and codes of this product; 4. This product and the Agreement can be transferred to a third party only when the terms and conditions in this Agreement are accepted. When you transfer all or any part of this product to a third party, the permission to use this product terminates automatically. Instructions for User’s Manual: Before operating, please read the User’s Manual carefully. We are not responsible for any direct or indirect losses caused by hardware damage, application damage, file lost or system crash due to improper operation. It is assumed that you have carefully read and understood the Agreement, and will abide by the terms and conditions. Notice: Dear users, thanks for purchasing this product. Before operating, please read the following notice: Do not expose this unit to the rain or moist environment to avoid fire or electric shock. To avoid fire, electric shock or product damage, please keep this unit away from rain, moisture, and water drops or spray. Safety Guide 1. Please use dedicated adapter only; do not share with other units. 2. Keep the adapter power cord and plug away from heat sources. 3. Do not place any heavy object on the power cord or plug. 4. Do not disassemble the adapter or power cord. 5. To ensure your safety, do not open the shell; please ask qualified personnel for repair. Maintenance Tips 1. The product structure is complicated; please ask qualified personnel for maintenance. 2. Do not remove any parts without permission, or else the warranty will be void. 3. For maintenance, please contact local service center. 4. Replace the component or part with genuine ones only. 2 2 Appearance Front Panel Rear Panel 1 1.TF Card2.Reset Button3.USB 23 1. HDMI out2. RJ45 network interface 3. A/V out4. Micro USB 5. Power 12345 3 3 Rear Panel Connection Rear Panel Connection White Red Yellow 4 3 Rear Panel Connection Rear Panel Connection Tips: Some applications require mouse operation! Tips: Certain functions may be added or deleted due to software update. The unit shall prevail. Internet Broadband Internet connection Broadband Router/Modem Wired Network WA N12 LA N 34 51 VOL VOL 12 3 4 5 6 78 9 0 ON OFF CH CH BACK MENU RESDEL EPG DISP EXIT SETUP F1F2F3F4 5 4 Remote 116 17 18 19 20 21 22 23 24 25 26 27 28 29 2 3 4 5 6 7 8 9 10 11 12 13 14 15 6 4 Remote 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 21 22 23 24 25 Blue button. Functionality depends on the application Go in and out of Standby Red button. Functionality depends on the application Volume Up/Dn Mute/Un-Mute sound Shortcut to the System Setup menu Back one level 19 20 No. Key Function F1 button. Functionality depends on the application Move left, right, up, down OK Numeric input Change the screen resolution when available Play/Pause 26 F2 button. Functionality depends on the application Green button. Functionality depends on the application Mouse left button Mouse ON/OFF Stop F3 button. Functionality depends on the application F4 button. Functionality depends on the application Yellow button. Functionality depends on the application Mouse right button Channel Up/Dn Shortcut to the Main Menu Show EPG when available Show additional information when available F1 F2 F3 F4 51 ON OFF VOL VOL CH CH 5 First Time Set-Up When operating the box for the first time, you will be asked to set-up a basic set of features that are essential for having a good IPTV experience. Be advised that without a proper internet connection you cannot proceed to the main menu. Chapter 6 describes in detail on how to set-up the network. 7 27 28 29 Multipurpose delete button No. Key Function Generic exit button. Functionality depends on the application Skip to next file/Skip to previous file 6 Network Settings 6.1 Available Networks and Checking Current Network Status Check the available guaranteed bandwidth with your ISP. Recommended bandwidth: To ensure smooth playing of Internet video resources, the bandwidth should be at least 2Mbps. Router: For easy and quick connection, a wireless router is recommended. …

Text truncated - open the document above for the full version.

MPE Calculation Method E (V/m) = (30*P*G) 0.5 /d Power Density: Pd (W/m2) = E 2 /377 E = Electric Field (V/m) P = Peak RF output Power (W) G = EUT Antenna numeric gain (numeric) d = Separation distance between radiator and human body (m) The formula can be changed to Pd = (30*P*G) / (377*d 2 ) From the peak EUT RF output power, the minimum mobile separation distance, d=0.2m, as well as the gain of the used antenna, the RF power density can be obtained. Calculated Result and Limit (WORSE CASE IS AS BELOW) Antenna Gain (Numeric) Peak Output Power (mW) Power Density (S) (mW/cm2) Limit of Power Density (S) (mW/cm2) Test Result 1.58（2dBi） 40.83 （16.11dBm） 0.013 1 Compiles

Global United Technology Services Co., Ltd. Report No.: GTSE14100185301 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS or testing done by GTS in connection with, distribution or use of the product described in this report must be approved by GTS in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. FCC Report (WIFI) Applicant: TelergyHD BV Address of Applicant: Witte Kruislaan 6 1217 AP Hilversum Netherlands Equipment Under Test (EUT) Product Name: OTT BOX Model No.: THD603QC, GK-MP1208 Trade Mark: TelergyHD FCC ID: 2AA9TTHD603QC0001 Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247:2013 Date of sample receipt: October 25, 2014 Date of Test: November 17-19, 2014 Date of report issued: November 20, 2014 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE14100185301 Global United Technology Services Co., Ltd. Project No.: GTSE141001853RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 60 2 Version Version No. Date Description 00 November 20, 2014 Original Prepared By: Date: November 20, 2014 Project Engineer Check By: Date: November 20, 2014 Reviewer Report No.: GTSE14100185301 Global United Technology Services Co., Ltd. Project No.: GTSE141001853RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 60 3 Contents Page 1 COVER PAGE ........................................................................................................................................... 1 2 VERSION .................................................................................................................................................. 2 3CONTENTS .............................................................................................................................................. 3 4TEST SUMMARY ..................................................................................................................................... 4 5GENERAL INFORMATION ...................................................................................................................... 5 5.1CLIENT INFORMATION ......................................................................................................................... 5 5.2GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3TEST MODE ........................................................................................................................................ 6 5.4DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 6 5.5TEST FACILITY .................................................................................................................................... 7 5.6TEST LOCATION ................................................................................................................................. 7 6TEST INSTRUMENTS LIST ..................................................................................................................... 8 7TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1ANTENNA REQUIREMENT ..................................................................................................................... 9 7.2CONDUCTED EMISSIONS ................................................................................................................... 10 7.3CONDUCTED PEAK OUTPUT POWER .................................................................................................. 13 7.4CHANNEL BANDWIDTH ...................................................................................................................... 14 7.5POWER SPECTRAL DENSITY ............................................................................................................. 19 7.6BAND EDGES .................................................................................................................................... 24 7.6.1Conducted Emission Method ..................................................................................................... 24 7.6.2Radiated Emission Method ........................................................................................................ 27 7.7SPURIOUS EMISSION ......................................................................................................................... 32 7.7.1Conducted Emission Method ..................................................................................................... 32 7.7.2Radiated Emission Method .............................…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission