2AAFX-M2H5BLEDeere & Company Instrument Cluster with Bluetooth LE (BLE)

THIS IS AN ENGINEERING USER MANUAL. THIS IS FOR INTERNAL USE ONLY. 1 Deere & Company Instrument Cluster with Bluetooth LE (BLE) User Manual 12 March 2021 (ENGLISH) Model Number FCC ID IC Number PH85239277 2AAFX-M2H5BLE 11137A-M2H5BLE PH85239285 PH85239281 PH85239306 PH85239297 THIS IS AN ENGINEERING USER MANUAL. THIS IS FOR INTERNAL USE ONLY. 2 Introduction IMPORTANT: Read through this instruction thoroughly and familiarize yourself with the device before using parts. This document has general user guideline for the product. The product, Deere & Company Instrument Cluster with Bluetooth LE (BLE), reads vehicle information from the CAN bus and convey that information to user's mobile device via BLE. Recognize Safety Information This is a safety-alert symbol. When you see this symbol on your machine or in this manual, be alert to the potential for personal injury. Follow recommended precautions and safe operating practices. Understand Signal Words DANGER; The signal word DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. WARNING; The signal word WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury. CAUTION; The signal word CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury. CAUTION may also be used to alert against unsafe practices associated with events which could lead to personal injury. A signal word—DANGER, WARNING, or CAUTION—is used with the safety-alert symbol. DANGER identifies the most serious hazards. DANGER or WARNING safety signs are located near specific hazards. General precautions are listed on CAUTION safety signs. CAUTION also calls attention to safety messages in this manual Follow Safety Instructions Carefully read all safety messages in this instruction. Read the product operators manual for operating instructions and safety messages. Do not let anyone operate without instruction. (A copy of the operator’s manual may also be available from the Service ADVISOR™ application.) Service ADVISOR is a trademark of Deere & Company Instructions Download the Riding Lawn Equipment’s Mobile App to proceed in using the Bluetooth Low Energy feature of this product. THIS IS AN ENGINEERING USER MANUAL. THIS IS FOR INTERNAL USE ONLY. 3 Regulatory and Compliance Information United States—Federal Communications Commission (FCC) This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation. This Device must be operated as supplied by John Deere Ag Management Solutions. Any changes or modifications made to this device without the express written approval of John Deere Ag Management Solutions may void the user's authority to operate this device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. RF Exposure Guidance This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (8 in) between the radiator and persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. Canada—Notification to Users This device complies with ISED Canada’s license-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference; and 2. This device must accept any interference, including interference that may cause undesired operation of the device. CAN ICES-3 (B)/NMB-3(B) RF Exposure Guidance This equipment complies with Innovation, Science and Economic Development Canada radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (8 in) between the radiator and persons. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with Innovation, Science and Economic Development Canada multi-transmitter product procedures.

John Deere ISG-Urbandale 9505 NorthPark Dr, Urbandale, IA 50131 U.S.A Phone: 515-253-6814 Fax: 515-253-6258 E-mail: [email protected] Kana Udomon Senior Product Compliance Engineer Hardware Product Verification and Validation Subject: Letter of Agency "I, an officer of Deere & Company, do hereby authorize Intertek Testing Services (Mr. Terry Chan / Tim Lee/ Herbert Wong / Kenneth Wong) to act on our behalf in front of the Federal Communications Commission with respect to all matters relating to certification of equipment under Part 15 and Part 18 of the FCC Rules until further notice." I further certify that no party (as defined in §1.2002(b) of CFR 47, 2004) to this application, including myself, is subject to a denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.,862. This document is solely submitted for purposes of review for the certification and for no other purpose and should not be disclosed to any third parties without prior written consent of Deere & Company. Should you have any questions, comments, or require additional information regarding this matter, please do not hesitate to contact me. Yours sincerely, Kana Udomon July 19, 2021 Kana Udomon Senior Product Compliance Engineer Deere & Company One Deere Place, Moline, IL 61265, USA.

07/07/2021 Attention: Application Examiner Re: Request for confidentiality Applicant: Deere & Company FCC ID: 2AAFX-M2H5BLE To whom it may concern, Permanent Confidentiality Request is hereby submitted by Deere & Company to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) & 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: • Schematics • Detailed Block diagrams • Detailed Operational/Functional Description Short-term Confidentiality Request is hereby submitted by Deere & Company to withhold from public review for a period of 180 days from the date of the Grant of Equipment Authorization and prior to marketing, certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) & 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept confidential for a period of 180 days from the date of Authorization: • Internal photos • Test setup photos • External photos • User manual Rationale for request for confidentiality: Deere & Company has invested considerable time and materials in research and development to produce the referenced product. If you have questions or need further information, please contact the undersigned. Kana Udomon Senior Product Compliance Engineer John Deere – Intelligent Solutions Group – Urbandale Public John Deere ISG-Urbandale 9505 NorthPark Drive, Urbandale, IA, USA Phone: 515-253-6814 Fax: 515-253-6258 E-mail: [email protected] Kana Udomon Senior Product Compliance Engineer Product Safety and Compliance

INTERTEK TESTING SERVICE Report No.: HK20101182 Equipment Photographs (External) Label Location C 1234 4321 D C B A D A SYM DATE(YYYY-MM-DD)APPROVEDCHANGE DOCDESCRIPTIONZONE ( )50 ( )15 MIN5 MIN3 MIN5 MIN8 MIN 8 4X (R)1.5 PH53241331 JD90 1/1 D PART NUMBER VERSION SHEET REV PH53241331 JD901/1D PART NUMBERVERSIONSHEETREV CONFIDENTIAL AND PROPRIETARY TO DEERE & COMPANY. UNAUTHORIZED USE, DISCLOSURE, OR REPRODUCTION PROHIBITED. COPYRIGHT DEERE & COMPANY. ALL RIGHTS RESERVED. ORIGINATOR YASHWANT K. YEMUL ORIGINATION DATEREFERENCES: METRIC SCALE 2019-12-11JDS-G1135:1MATERIAL NAME LABEL SIZE PH53241330 C CERTIFICATION CAGE CODE M2H5 BLE MODULE DEERE & COMPANY MOLINE, ILLINOIS 61265 VERSION JD90 SHEET 1/1 PART NUMBER PH53241331 REVISION D MODEL RLMODEL REVDRW REVDRW RL(MASS KG) StudyD.14D.14Study(0) MODEL NUMBERHARDWARE PART NUMBER PH85239277 HW P/N: PH85239277 PH85239285HW P/N: PH85239285 PH85239281HW P/N: PH85239281 PH85239306HW P/N: PH85239306 PH85239297HW P/N: PH85239297 1. TEXT TO BE LOCATED APPROXIMATELY AS SHOWN. 2. BACKGROUND COLOR: JDM F9W WHITE 3. TEXT COLOR: JDM F9RL LABEL GLOSS BLACK 4. FONT DEFINITION: ALL TEXT TO BE SANS SERIF FONT. ALL TEXT TO BE 1.5 mm. UNLESS OTHERWISE NOTED. 5. REFER PDP-428-F1 FORM FOR IC AND FCC ID NUMBERS. 6. COMPLIANCE WITH EUROPEAN REGULATION 1907/2006 (EU REACH), INCLUDING ITS ANNEX XVII BAN OF CERTAIN SUBSTANCES AND DISCLOSURE OF SUBSTANCES OF VERY HIGH CONCERN ARE REQUIRED FOR THIS PART. 7. <KC> PER AG 001 8. THE MODEL NUMBERS MENTIONED IN THE TABLE WILL BE PRINTED AS HARDWARE PART NUMBER ON THE END PRODUCT PN-SN LABEL. MATERIALS PER JDM H31 <KC> ACTUAL SIZE ANTENNA SYMBOL CE MARKING RCM SYMBOL WEEE SYMBOL BLUETOOTH SYMBOL D1 REVISED TEXT262403PH2021-03-10 YASHWANT K. YEMUL C4 D1 D2 ADDED NOTE 8262403PH2021-03-10 YASHWANT K. YEMUL A3 D2

C 1234 4321 D C B A D A SYM DATE(YYYY-MM-DD)APPROVEDCHANGE DOCDESCRIPTIONZONE ( )50 ( )15 MIN5 MIN3 MIN5 MIN8 MIN 8 4X (R)1.5 PH53241331 JD90 1/1 D PART NUMBER VERSION SHEET REV PH53241331 JD901/1D PART NUMBERVERSIONSHEETREV CONFIDENTIAL AND PROPRIETARY TO DEERE & COMPANY. UNAUTHORIZED USE, DISCLOSURE, OR REPRODUCTION PROHIBITED. COPYRIGHT DEERE & COMPANY. ALL RIGHTS RESERVED. ORIGINATOR YASHWANT K. YEMUL ORIGINATION DATEREFERENCES: METRIC SCALE 2019-12-11JDS-G1135:1MATERIAL NAME LABEL SIZE PH53241330 C CERTIFICATION CAGE CODE M2H5 BLE MODULE DEERE & COMPANY MOLINE, ILLINOIS 61265 VERSION JD90 SHEET 1/1 PART NUMBER PH53241331 REVISION D MODEL RLMODEL REVDRW REVDRW RL(MASS KG) StudyD.14D.14Study(0) MODEL NUMBERHARDWARE PART NUMBER PH85239277 HW P/N: PH85239277 PH85239285HW P/N: PH85239285 PH85239281HW P/N: PH85239281 PH85239306HW P/N: PH85239306 PH85239297HW P/N: PH85239297 1. TEXT TO BE LOCATED APPROXIMATELY AS SHOWN. 2. BACKGROUND COLOR: JDM F9W WHITE 3. TEXT COLOR: JDM F9RL LABEL GLOSS BLACK 4. FONT DEFINITION: ALL TEXT TO BE SANS SERIF FONT. ALL TEXT TO BE 1.5 mm. UNLESS OTHERWISE NOTED. 5. REFER PDP-428-F1 FORM FOR IC AND FCC ID NUMBERS. 6. COMPLIANCE WITH EUROPEAN REGULATION 1907/2006 (EU REACH), INCLUDING ITS ANNEX XVII BAN OF CERTAIN SUBSTANCES AND DISCLOSURE OF SUBSTANCES OF VERY HIGH CONCERN ARE REQUIRED FOR THIS PART. 7. <KC> PER AG 001 8. THE MODEL NUMBERS MENTIONED IN THE TABLE WILL BE PRINTED AS HARDWARE PART NUMBER ON THE END PRODUCT PN-SN LABEL. MATERIALS PER JDM H31 <KC> ACTUAL SIZE ANTENNA SYMBOL CE MARKING RCM SYMBOL WEEE SYMBOL BLUETOOTH SYMBOL D1 REVISED TEXT262403PH2021-03-10 YASHWANT K. YEMUL C4 D1 D2 ADDED NOTE 8262403PH2021-03-10 YASHWANT K. YEMUL A3 D2

INTERTEK TESTING SERVICE Report No.: HK20101182 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK20101182 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK20101182 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK20101182 Equipment Photographs (Internal) INTERTEK TESTING SERVICE Report No.: HK20101182 Equipment Photographs (Internal)

INTERTEK TESTING SERVICE MPE Analysis Report Applicant: Product Description: Deere & Company Deere & Company Instrument Cluster with Bluetooth LE (BLE) Model No.: FCC ID: PH85239277 2AAFX-M2H5BLE The product, Deere & Company Instrument Cluster with Bluetooth LE (BLE), operates on Vehicle Battery (12VDC) & reads vehicle information from the CAN bus and convey that information to user's mobile device via BLE. For Maximum Permissible Exposure (MPE) evaluation of the unit, the maximum power density at 20 cm from this transmitter shall be less than the General Population / Uncontrolled MPE limit in OET Bulletin 65 and meet the requirement listed in KDB447498. For the 2.4GHz Bluetooth BLE portion of the unit, the measured powers among all the measured channels were within its production tolerance. The antenna gain is 0.3 dBi and its maximum source-based time-averaging duty factor is 100%. From these data and its operating configuration, the exposed power density at a distance (R) of 20 cm from the center of radiation of the antenna can be calculated according to OET Bulletin 65 as follow: The EIRP radiated power = conducted power (maximum) + antenna gain = (16) dBm + 0.3 dBi = 16.3 dBm (42.7 mW) The radiated (EIRP) source-based time-averaging output power = (42.7 * 1) mW = 42.7 mW The power density at 20 cm from the antenna = EIRP / 4 πR^2 = 0.0085 mW cm-2 In the frequency range of 1,500 - 100,000MHz, the MPE limit is 1.0 mWcm-2 for general population and uncontrolled exposure. As the measured power density at 20cm from the transmitter is lower than the MPE limit, the compliance to the MPE limit can be ensured by indicating the minimum 20cm separation between the transmitter's radiating structures and body of the user or nearby persons. The following RF exposure statement is proposed to be included in the user manual: “ FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCC’s RF exposure guidelines, place the unit at least 20cm from nearby persons.”

2/F., Garment Centre, 576 Castle Peak Road, Kowloon, Hong Kong SAR, China. Telephone: (852) 2173 8888 Facsimile: (852) 2785 5487 www.intertek.com Intertek’s standard Terms and Conditions can be obtained at our website http://www.intertek.com/terms/. The test report only allows to be revised within the retention period unless further standard or the requirement was noticed. This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. © 2017 Intertek Page 1 of 35 TEST REPORT Report Number: 20101182HKG-001 Application for Original Grant of 47 CFR Part 15 Certification New Family of RSS-247 Issue 2 Equipment FCC ID: 2AAFX-M2H5BLE IC: 11137A-M2H5BLE Prepared and Checked by: Approved by: Signed On File Wong Cheuk Ho, Herbert Lead Engineer Wong Kwok Yeung, Kenneth Senior Lead Engineer Date: March 18, 2020 TEST REPORT Deere & Company Intertek Report No: 20101182HKG-001 Page 2 of 35 GENERAL INFORMATION Applicant Name: Applicant Address: Deere & Company One John Deere Place Moline Illinois 61265 United States FCC Specification Standard: FCC Part 15, October 1, 2019 Edition FCC ID: 2AAFX-M2H5BLE FCC Model(s): PH85239277, PH85239285, PH85239281, PH85239306, PH85239297 IC Specification Standard: RSS-247 Issue 2, February 2017 RSS-Gen Issue 5 Amendment 1, March 2019 IC: 11137A-M2H5BLE PMN: PH85239277, PH85239285, PH85239281, PH85239306, PH85239297 HVIN: PH85239277, PH85239285, PH85239281, PH85239306, PH85239297 Type of EUT: Spread Spectrum Transmitter Description of EUT: Deere & Company Instrument Cluster with Bluetooth LE (BLE) Serial Number: 1101127 (radiated emission test) 1101119 (conductive measurement test) Sample Receipt Date: October 30, 2020 Date of Test: October 30, 2020 to December 28, 2020 Report Date: March 18, 2020 Environmental Conditions: Temperature: +10 to 40°C Humidity: 10 to 90% Conclusion: Test was conducted by client submitted sample. The submitted sample as received complied with the 47 CFR Part 15 / RSS-247 Issue 2 Certification. TEST REPORT Deere & Company Intertek Report No: 20101182HKG-001 Page 3 of 35 TABLE OF CONTENTS 1.0 TEST RESULTS SUMMARY & STATEMENT OF COMPLIANCE ............................................ 4 1.1 Summary of Test Results ................................................................................................. 4 1.2 Statement of Compliance ................................................................................................ 4 2.0 GENERAL DESCRIPTION ................................................................................................ 5 2.1 Product Description ....................................................................................................... 5 2.2 Test Methodology ........................................................................................................... 6 2.3 Test Facility ..................................................................................................................... 6 2.4 Related Submittal(s) Grants ............................................................................................ 6 3.0 SYSTEM TEST CONFIGURATION .................................................................................... 7 3.1 Justification ..................................................................................................................... 7 3.2 EUT Exercising Software .................................................................................................. 8 3.3 Details of EUT and Description of Accessories ................................................................. 9 3.4 Measurement Uncertainty .............................................................................................. 9 4.0 TEST RESULTS ............................................................................................................ 10 4.1 Maximum Conducted Output Power at Antenna Terminals ......................................... 10 4.2 Minimum 6dB RF Bandwidth......................................................................................... 12 4.3 Maximum Power Spectral Density ................................................................................ 15 4.4 Out of Band Conducted Emissions ................................................................................ 20 4.5 Field Strength Calculation.............................................................................................. 25 4.6 Transmitter Radiated Emissions in Restricted Bands and Spurious Emissions ............... 26 4.6.1 Radiated Emission Configuration Photograph ............................................................ 26 4.6.2 Radiated Emission Data .............................................................................................. 26 4.6.3 Radiated Emission Test Setup ..................................................................................... 31 4.6.4 Transmitter Duty Cycle Calculation ............................................................................ 32 4.7 AC Power Line Conducted Emission .............................................................................. 33 5.0 EQUIPMENT LIST ................…

Text truncated - open the document above for the full version.

INTERTEK TESTING SERVICE Report No: HK20101182 Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK20101182 Configuration Photographs Worst-Case Radiated Emissions (Rear View) INTERTEK TESTING SERVICE Report No: HK20101182 Configuration Photographs Worst-Case Radiated Emissions (Front View) INTERTEK TESTING SERVICE Report No: HK20101182 Configuration Photographs Worst-Case Radiated Emissions (Rear View)