2AAGF-RPD01WIRELESS SPORT HEADPHONES

QUICK START GUIDE 543 12 © All rights reser ved. adidas, the Badge of Sport and the 3-Stripes mark are registered trademarks of adidas used by Zound Industries International AB under license from adidas AG. © Tous droits réser vés. adidas le, “Badge of Sport” et le logo de marque à 3 bandes sont des marques déposées par adidas et utilisées par Zound Industries International AB sous licence d’utilisation accordée par adidas AG. The Bluetooth ® wordmark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Zound Industries International AB is under license. R01 www.adidasheadphones.com ENGLISHENGLISH GET STARTED • Start with your headphones off. Press and hold the middle control button until the LED turns blue and the headphones are in pairing mode. • Open the Bluetooth ® list on your phone and select adidas RPD-01. • Go to your favourite audio app and press play. Get the adidas headphones app to activate more features, configure the action button and complete the setup. 1. TWIST FIT SYSTEM The ear tips and the optional silicone ear wings come in 4 different sizes that can be combined for a perfect fit. ܟTo change the size, first remove the ear tip and then the ear wing by gently pulling them from the headphones. ܟAttach the new ear wing by stretching it into place and then fasten the new ear tip. 2. CONTROL BUTTONS ܟPress middle button for 2 seconds to turn on or off ܟPress middle button for 4 seconds for Bluetooth pairing ܟPress upper or lower button to change volume ܟPress middle button to play or pause audio ܟDouble or triple press middle button for previous or next track ܟPress middle button to answer or end call ܟDouble press middle button to reject an incoming call 3. CUSTOMISABLE ACTION BUTTON 4. LED INDICATOR 5. USB-C PORT FOR CHARGING GET STARTED • Start with your headphones off. Press and hold the middle control button until the LED turns blue and the headphones are in pairing mode. • Open the Bluetooth ® list on your phone and select adidas RPD-01. • Go to your favourite audio app and press play. Get the adidas headphones app to activate more features, configure the action button and complete the setup. 1. TWIST FIT SYSTEM The ear tips and the optional silicone ear wings come in 4 different sizes that can be combined for a perfect fit. ܟTo change the size, first remove the ear tip and then the ear wing by gently pulling them from the headphones. ܟAttach the new ear wing by stretching it into place and then fasten the new ear tip. 2. CONTROL BUTTONS ܟPress middle button for 2 seconds to turn on or off ܟPress middle button for 4 seconds for Bluetooth pairing ܟPress upper or lower button to change volume ܟPress middle button to play or pause audio ܟDouble or triple press middle button for previous or next track ܟPress middle button to answer or end call ܟDouble press middle button to reject an incoming call 3. CUSTOMISABLE ACTION BUTTON 4. LED INDICATOR 5. USB-C PORT FOR CHARGING Less paper saves trees. The full manual is available in-app or at adidasheadphones.com Less paper saves trees. The full manual is available in-app or at adidasheadphones.com ENGLISHENGLISH GET STARTED • Start with your headphones off. Press and hold the middle control button until the LED turns blue and the headphones are in pairing mode. • Open the Bluetooth ® list on your phone and select adidas RPD-01. • Go to your favourite audio app and press play. Get the adidas headphones app to activate more features, configure the action button and complete the setup. 1. TWIST FIT SYSTEM The ear tips and the optional silicone ear wings come in 4 different sizes that can be combined for a perfect fit. ܟTo change the size, first remove the ear tip and then the ear wing by gently pulling them from the headphones. ܟAttach the new ear wing by stretching it into place and then fasten the new ear tip. 2. CONTROL BUTTONS ܟPress middle button for 2 seconds to turn on or off ܟPress middle button for 4 seconds for Bluetooth pairing ܟPress upper or lower button to change volume ܟPress middle button to play or pause audio ܟDouble or triple press middle button for previous or next track ܟPress middle button to answer or end call ܟDouble press middle button to reject an incoming call 3. CUSTOMISABLE ACTION BUTTON 4. LED INDICATOR 5. USB-C PORT FOR CHARGING GET STARTED • Start with your headphones off. Press and hold the middle control button until the LED turns blue and the headphones are in pairing mode. • Open the Bluetooth ® list on your phone and select adidas RPD-01. • Go to your favourite audio app and press play. Get the adidas headphones app to activate more features, configure the action button and complete the setup. 1. TWIST FIT SYSTEM The ear tips and the optional silicone ear wings come in 4 different sizes that can be combined for a perfect fit. ܟTo change the size, first remove the ear tip and then the ear wing by gently pulling them from the headphones. ܟAttach the new ear wing by stretching it into place and then fasten the new ear tip. 2. CONTROL BUTTONS ܟPress middle button for 2 seconds to turn on or off ܟPress middle button for 4 seconds for Bluetooth pairing ܟPress upper or lower button to change volume ܟPress middle button to play or pause audio ܟDouble or triple press middle button for previous or next track ܟPress middle button to answer or end call ܟDouble press middle button to reject an incoming call 3. CUSTOMISABLE ACTION BUTTON 4. LED INDICATOR 5. USB-C PORT FOR CHARGING Less paper saves trees. The full manual is available in-app or at adidasheadphones.com Less paper saves trees. The full manual is available in-app or at adidasheadphones.com ENGLISHENGLISH GET STARTED • Start with your headphones off. Press and hold the middle control button until the LED turns blue and the headphones are in pairing mode. • Open the Bluetooth ® list on your phone and select adidas RPD-01. • Go to your favourite audio app and press play. Get the adidas headphones app to ac…

Text truncated - open the document above for the full version.

SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Revised wording (obsolete) 1.0 2.0 Sept–25-2007 Updated company template (obsolete) 2.0 3.0 Jan-31-2012 Updated letter information (obsolete) 3.0 4.0 May-23-2014 Added FCC ID field (obsolete) 4.0 5.0 Sep-16-2014 Updated company name & logo (current) 5.0 6.0 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0 Zound Industries International AB 2020/1/20 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, Zound Industries International AB_____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s): FCC ID: 2AAGF-RPD01 Product Description: WIRELESS SPORT HEADPHONES Model: RPD-01 Sincerely, Client’s signature Client’s name / title: Edison Xu& Compliance Engineer Contact information / address : Centralplan 15 SE-111 20 Stockholm Sweden

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 Zound Industries International AB 2020/1/20 To: Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD Subject: Permanent Confidentiality Request for FCC ID: 2AAGF-RPD01 Pursuant to sections 0.457 and 0.459 of CFR 47, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application as: - Block Diagram - Schematics - Operational Description The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Client’s signature: Client’s name & title : Edison Xu & Compliance Engineer Contact information / address: Centralplan 15 SE-111 20 Stockholm Sweden

SCS-F19: Confidentiality Request Letter Page 1 of 2 Rev 6.0 775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: [email protected] Confidentiality Request Letter Reason for Amendment (current / obsolete) Revision History Approved Date From To Initial Release (obsolete) 1.0 1.0 Nov-14-2006 Adding CFR 2.459 (obsolete) 1.0 2.0 August – 11 - 2008 Updated company template & Added text box (obsolete) 2.0 3.0 Jan-31-2012 Added IC confidentiality letter form (obsolete) 3.0 4.0 March-26-2015 Corrections to STC form. Added reference to KDB (obsolete) 4.0 5.0 Nov-19-2015 Updated company logo (current) 5.0 6.0 Jun-26-2019 SCS-F19: Confidentiality Request Letter Page 2 of 2 Rev 6.0 Zound Industries International AB 2020/1/20 To: Federal Communications Commission Office of Engineering and Technology Equipment Authorization Division 7345 Oakland Mills Road Columbia, Maryland 21046 Subject: Short Term Confidentiality Request for FCC ID: 2AAGF-RPD01 To Whom It May Concern: Pursuant to sections 0.457 and 0.459 of CFR 47, and to avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of / / not to exceed 180 days from the Grant Date. See KDB 726920. - User Manual - Internal Photos - Test Setup photos - External Photos The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Sincerely, Client’s signature: Client’s name & title : Edison Xu & Compliance Engineer Contact information / address: Centralplan 15 SE-111 20 Stockholm Sweden

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 3 Report Version 1 Reference No.: 191127N045 PHOTOGRAPHS OF THE EUT Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 3 Report Version 1 Reference No.: 191127N045 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 3 Report Version 1 Reference No.: 191127N045

MODEL: XXXX FCC ID: XX IC: XX CMIIT ID: X INPUT: DC 5V 200mA XXX Complies with IMDA Standards XXXXXX XXXXXXX XXX-XXXXXX D XX XXXX XXX MODEL: RPD-01 FCC ID: 2A AGF-RPD01 IC: 11153A-RPD01 CAN ICES-3(B)/NMB-3(B) INPUT: DC 5V 200mA Complies with IMDA Standards DA106056 Wave 1 Wave 2 80 mm Glue 10 mm Glue 10 mm 15 mm 80 mm 15 mm The label stamped to the equipment by permanent adhesive Label Location

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 4 Report Version 1 Reference No.: 191127N045 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 4 Report Version 1 Reference No.: 191127N045 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 4 Report Version 1 Reference No.: 191127N045 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 4 Report Version 1 Reference No.: 191127N045 BT Chip ANT

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 6 Report Version 1 Test Report No.: FM191127N045 RF EXPOSURE REPORT Applicant Zound Industries International AB Address Centralplan 15 SE-111 20 Stockholm Sweden Manufacturer or Supplier Zound Industries International AB Address Centralplan 15 SE-111 20 Stockholm Sweden Product WIRELESS SPORT HEADPHONES Brand Name Model RPD-01 Additional Model & Model Difference N/A Date of tests Nov. 27, 2019 ~ Dec. 23, 2019 FCC Part 2 (Section 2.1093) KDB 447498 D01 IEEE C95.1 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Ryan Lu Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Jan. 19, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 6 Report Version 1 Test Report No.: FM191127N045 Table of Contents RELEASE CONTROL RECORD ................................................................................ 3 1. CERTIFICATION .............................................................................................. 4 2. RF EXPOSURE DEFINE ................................................................................. 5 3. CLASSIFICATION ........................................................................................... 5 4. SAR TEST EXCLUSION THRESHOLDS ........................................................ 6 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 3 of 6 Report Version 1 Test Report No.: FM191127N045 RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED FM191127N045 Original release Jan. 19, 2020 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 4 of 6 Report Version 1 Test Report No.: FM191127N045 1. CERTIFICATION FCC ID: 2AAGF-RPD01 PRODUCT: WIRELESS SPORT HEADPHONES BRAND NAME: MODEL NO.: RPD-01 ADDITIONAL NO.: N/A TEST SAMPLE: Engineering Sample APPLICANT: Zound Industries International AB STANDARDS: FCC Part 2 (Section 2.1093) KDB 447498 D01 IEEE C95.1 Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 5 of 6 Report Version 1 Test Report No.: FM191127N045 2. RF EXPOSURE DEFINE The corresponding SAR Exclusion Threshold condition, listed below: 1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR,16 where   f(GHz) is the RF channel transmit frequency in GHz   Power and distance are rounded to the nearest mW and mm before calculation   The result is rounded to one decimal place for comparison The test exclusions are applicable only when the minimum test separation distance is ≤ 50 mm and for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion. 2) At 100 MHz to 6 GHz and for test separation distances > 50 mm, the SAR test exclusion threshold is determined according to the following: a) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·( f(MHz)/150)] mW, at 100MHz to 1500 MHz b) [Threshold at 50 mm in step 1) + (test separation distance - 50 mm)·10] mW at > 1500 MHz and ≤ 6 GHz 3) At frequencies below 100 MHz, the following may be considered for SAR test exclusion. a) The threshold at the corresponding test separation distance at 100 MHz in step 2) is multiplied by [1 + log(100/f(MHz))] for test separation distances > 50 mm and < 200 mm. b) The threshold determined by the equation in a) for 50 mm and 100 MHz is m…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 51 Report Version 1 Test Report No.: RF191127N045-1 TEST REPORT Applicant Zound Industries International AB Address Centralplan 15 SE-111 20 Stockholm Sweden Manufacturer or Supplier Zound Industries International AB Address Centralplan 15 SE-111 20 Stockholm Sweden Product WIRELESS SPORT HEADPHONES Brand Name Model RPD-01 Additional Model & Model Difference N/A Date of tests Nov. 27, 2019 ~ Dec. 23, 2019 the tests have been carried out according to the requirements of the following standards: FCC Part 15, Subpart C, Section 15.247 CONCLUSION: The submitted sample was found to COMPLY with the test requirement Tested by Ryan Lu Project Engineer / EMC Department Approved by Glyn He Assistant Manager / EMC Department Date: Jan. 19, 2020 This report is governed by, and incorporates by reference, CPS Conditions of Service as posted at the date of issuance of this report at http://www.bureauveritas.com/home/about-us/our-business/cps/about-us/terms-conditions/and is intended for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. Measurement uncertainty is only provided upon request for accredited tests. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence or if you require measurement uncertainty; provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute you unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 51 Report Version 1 Test Report No.: RF191127N045-1 TABLE OF CONTENTS RELEASE CONTROL RECORD ..................................................................................................... 4 1 SUMMARY OF TEST RESULTS ............................................................................................. 5 2 MEASUREMENT UNCERTAINTY .......................................................................................... 5 3 GENERAL INFORMATION ..................................................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT .................................................................................... 6 3.2 DESCRIPTION OF TEST MODES ...................................................................................... 7 3.2.1. CONFIGURATION OF SYSTEM UNDER TEST ........................................................ 8 3.2.2. TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL ............................. 8 3.3 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................................... 10 3.4 DESCRIPTION OF SUPPORT UNITS .............................................................................. 10 4 TEST TYPES AND RESULTS ................................................................................................11 4.1. RADIATED EMISSION AND BANDEDGE MEASUREMENT ........................................ 11 4.1.1 LIMITS OF RADIATED EMISSION AND BANDEDGE MEASUREMENT ................. 11 4.1.2 TEST INSTRUMENTS .............................................................................................. 12 4.1.3 TEST PROCEDURES .............................................................................................. 13 4.1.4 DEVIATION FROM TEST STANDARD .................................................................... 14 4.1.5 TEST SETUP ............................................................................................................ 14 4.1.6 EUT OPERATING CONDITIONS ............................................................................. 15 4.1.7 TEST RESULTS........................................................................................................ 16 4.2 NUMBER OF HOPPING FREQUENCY USED ................................................................. 24 4.2.1 LIMIT OF HOPPING FREQUENCY USED .............................................................. 24 4.2.2 TEST SETUP ............................................................................................................ 24 4.2.3 TEST INSTRUMENTS .............................................................................................. 24 4.2.4 TEST PROCEDURES .............................................................................................. 25 4.2.5 DEVIATION FROM TEST STANDARD .................................................................... 25 4.2.6 TEST RESULTS........................................................................................................ 25 4.3 DWELL TIME ON EACH CHANNEL ................................................................................. 28 4.3.1 LIMIT OF DWELL TIME USED ................................................................................. 28 4.3.2 TEST SETUP ..........................................…

Text truncated - open the document above for the full version.

Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 1 of 2 Report Version 1 Reference No.: 191127N045 SET-UP FOR RADIATED EMISSION TEST Frequency Range< 30MHz~1GHz > Bureau Veritas Shenzhen Co., Ltd. Dongguan Branch No. 34, Chenwulu Section, Guantai Rd., Houjie Town, Dongguan City, Guangdong 523942, China Tel.: +86 769 8998 2098 Fax: +86 769 8593 1080 Email: [email protected] Page 2 of 2 Report Version 1 Reference No.: 191127N045 Frequency Range< Above 1GHz >