2AAGF-WOBURNACTIVE STEREO LOUDSPEAKER

IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS • Read these instructions – All the safety and operating instructions should be read before this product is operated. • Keep these instructions – The safety and operating instructions should be retained for future reference. • Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to. • Follow all instructions – All operating and use instructions should be followed. WARNING! • WARNING – To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with liquids, such as vases, shall not be placed on apparatus. • WARNING – do not cover. • WARNING – only use attachments/accessories specified by the manufacturer (such as the exclu- sive supply adapter, battery etc). • WARNING – the plug is the main disconnect device and should be used as such. The disconnect device should remain readily accessible. • WARNING – this active loudspeaker may emit high sound pressure levels. • WARNING – do not listen too close to the active loudspeaker. • WARNING – do not listen for an extended period of time at a high sound pressure level. • WARNING – do not attempt to remove the active loudspeaker chassis, there are no user service- able parts. • WARNING – do not plug a guitar into the WOBURN. • WARNING – do not insert body parts or objects into the bass port for risk of injury. • DANGER – of dropping the product. • DANGER – of sharp corners. MOISTURE AND HUMIDITY • The active loudspeaker should be located in a place free from moisture and water. • Do not use this apparatus near water. Do not expose it to rain or dripping water. Do not splash water on it. INSTALLATION • Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. • No naked flame sources, such as lighted candles, should be placed on the active loudspeaker. • Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. • Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. CONNECTION • Connect the active loudspeaker according to the instructions in the manual. • Connect the active loudspeaker only to the correct mains voltage as shown on the equipment. • Protect the power cord from being walked on or pinched particularly at plugs, convenience recepta- cles, and the point where they exit the apparatus. • Use only power cables of the type specified in the operating instructions or as marked on the active loudspeaker. Do not substitute the separate power cable included with this active loudspeaker with any other power supply – use only the power cable provided by the manufacturer. • Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. • Unplug this apparatus during lightning storms or when unused for long periods of time. • Do not install in an area that impedes access to the power plug. Disconnecting the power plug is the only way to completely remove power to the product and the plug must be readily accessible at all times. CLEANING • Clean only with dry cloth. MAINTENANCE • Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. • CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing unless you are qualified to do so. 001. SAFETY INSTRUCTIONS 002. SAFETY LABELS 003. LANGUAGE INDEX 005. THE WOBURN 006. BOX CONTENTS 008. GENERAL DESCRIPTION 010. TURNING THE POWER ON/OFF 012. USING THE WOBURN WITH YOUR DEVICES 013. CHOOSING YOUR SOURCE 014. BLUETOOTH CONNECTION 018. CABLE CONNECTION 019. INPUT 1 - 3.5MM STEREO PLUG 020. INPUT 2 - RCA PORTS 021. OPTICAL AUDIO 022. STANDBY MODES 024. ADJUSTING SOUND 025. TECHNICAL INFORMATION 029. TROUBLE SHOOTING 257. WARRANTY INFO ENGLISH SECTIONS LANGUAGE INDEX 002. SAFTEY LABELS CAUTION: To prevent the risk of electric shock, do not remove cover (or back plate). There are no user serviceable parts inside. Refer servicing to qualified service personnel. This appliance may not be treated as regu-lar househ old waste. Management of WEEE (Waste Electrical and Electronic Equipment) is applicable in member states of the Europe-an Union and other European countries with individual national policies on the manage-ment of WEEE. If you need more information on the collectio n, reuse and recycling sys-tems, please contact your local or regional waste administration facility. Japan PSE Mark. The product complies with the following st andards J60065 (H23), ARIB STD T-66 Ver.3.6, J55013 (H22). This produ ct conforms to ANSI/UL Std. 60065 and is Certified to CAN/CSA Std. C22.2 No. 60065. The product complies with the following European directives: the electromagnetic compatibility directive 2004/108/EC. The low voltage directive 2006/95/EC. This equipment is a Class II or a double- insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may…

Text truncated - open the document above for the full version.

Zound Industries Torsgatan 2 111 23 Stockholm Sweden 2014-07-21 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAGF-WOBURN Product Name: ACTIVE STEREO LOUDSPEAKER Request for Confidentiality Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:  Schematics  Block diagram  Operational Description These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 07/21/2014 By: Nils Noren Signature Printed Title: Technical Manager On behalf of : Zound Industries Telephone: +46 767 722 713

Zound Industries Torsgatan 2 111 23 Stockholm Sweden DATE :2014-07-21 Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2AAGF-WOBURN Product Name: ACTIVE STEREO LOUDSPEAKER Request for Short-Term Confidentiality Pursuant to Sections 0.457 and 0.459 of the commission rules, and in accordance with the FCC Public notice dated June 15, 2004 (DA 04-1705), we hereby request short-term confidentiality for the following items prior to marketing the device.  Test Setup Photos  External Photos  Internal Photos  User Manual Since this design is a basis from which future technological products will evolve, Archos SA considers this information to be of benefit to its competitors, and that the disclosure of information in these documents would give competitors an unfair advantage in the market This request is being made retroactively due to an over site on our part. We understand that the information has been publicly available during 90 days. Dated this / Day of 07/21/2014 / By: Nils Noren Si gnature Printed Title: Technical Manager On behalf of : Zound Industries Telephone: +46 767 722 713

KAGA HIGHTECH CO. LTD Size:230mm*156mm Material:Tagboard Glue:Adhesive sticker Font color: White background color: Black Diameter of Telec logo: >5mm

Label location

FCC ID: 2AAGF-WOBURN According to 447498 D01 General RF Exposure Guidance v05 The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances ≤ 50 mm are determined by: [(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] ·[√f(GHz)] ≤ 3.0 for 1-g SAR and ≤ 7.5 for 10-g extremity SAR, where --f(GHz) is the RF channel transmit frequency in GHz --Power and distance are rounded to the nearest mW and mm before calculation --The result is rounded to one decimal place for comparison eirp = pt x gt = (EXd) 2 /30 where: pt = transmitter output power in watts, gt = numeric gain of the transmitting antenna (unit less), E = electric field strength in V/m, ---10 ((dBuV/m)/20) /10 6 d = measurement distance in meters (m) ---3m So pt = (EXd) 2 /30 x gt Field strength = 97.48 dBuV/m @3m Ant gain =0dBi, so Ant numeric gain= 1 So pt={ [10 (97.48/20) /10 6 x 3] 2 /30x1 }x1000 mW = 1.68 mW So (1.68 mW /5mm)x √2.480 = 0.529<3 Then SAR evaluation is not required

Global United Technology Services Co., Ltd. Report No.: GTSE14060102001 Authorized Signature: Robinson Lo Laboratory Manager This report details the results of the testing carried out on one sample. The results contained in this test report do not relate to other samples of the same product and does not permit the use of the GTS product certification mark. The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report. This report may only be reproduced and distributed in full. If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new system complies with all relevant standards. Any mention of GTS International Electrical Approvals or testing done by GTS International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by GTS International Electrical Approvals in writing. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only.” FCC REPORT Applicant: Zound Industries Address of Applicant: Torsgatan 2 111 23 Stockholm Sweden Equipment Under Test (EUT) Product Name: ACTIVE STEREO LOUDSPEAKER Model No.: WOBURN Trade Mark: FCC ID: 2AAGF-WOBURN Applicable standards: FCC CFR Title 47 Part 15 Subpart C Section 15.249:2013 Date of sample receipt: June 18, 2014 Date of Test: July 03-21, 2014 Date of report issued: July 21, 2014 Test Result : PASS * * In the configuration tested, the EUT complied with the standards specified above. Report No.: GTSE14060102001 Global United Technology Services Co., Ltd. Project No.: GTSE140601020RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 2 of 33 2 Version Version No. Date Description 00 July 21, 2014 Original Prepared By: Date: July 21, 2014 Project Engineer Check By: Date: July 21, 2014 Reviewer Report No.: GTSE14060102001 Global United Technology Services Co., Ltd. Project No.: GTSE140601020RF 2nd Floor, Block No.2, Laodong Industrial Zone, Xixiang Road Baoan District, Shenzhen, China 518102 Telephone: +86 (0) 755 2779 8480 Fax: +86 (0) 755 2779 8960 Page 3 of 33 3 Contents Page 1 COVER PAGE ............................................................................................................................................ 1 2 VERSION .................................................................................................................................................. 2 3 CONTENTS .............................................................................................................................................. 3 4 TEST SUMMARY ..................................................................................................................................... 4 5 GENERAL INFORMATION ...................................................................................................................... 5 5.1 CLIENT INFORMATION ......................................................................................................................... 5 5.2 GENERAL DESCRIPTION OF EUT ......................................................................................................... 5 5.3 TEST MODE ........................................................................................................................................ 7 5.4 DESCRIPTION OF SUPPORT UNITS ....................................................................................................... 7 5.5 TEST FACILITY .................................................................................................................................... 7 5.6 TEST LOCATION ................................................................................................................................. 7 5.7 OTHER INFORMATION REQUESTED BY THE CUSTOMER ......................................................................... 7 6 TEST INSTRUMENTS LIST ..................................................................................................................... 8 7 TEST RESULTS AND MEASUREMENT DATA ...................................................................................... 9 7.1 ANTENNA REQUIREMENT: .................................................................................................................... 9 7.2 CONDUCTED EMISSIONS ................................................................................................................... 10 7.3 RADIATED EMISSION METHOD ........................................................................................................... 13 7.3.1 Field Strength of The Fundamental Signal ................................................................................ 15 7.3.2 Spurious emissions .................................................................................................................... 16 7.3.3 Bandedge emissions.................................................................................................................. 20 7.4 20DB OCCUPY BANDWIDTH .............................................................................................................. 21 8 TEST SETUP PHOTO ............................................................................................................................ 23 9 EUT CONSTRUCTIONAL DETAILS ..................................................................................................... 25 Report No.: GTSE14060102001 Global United Technolo…

Text truncated - open the document above for the full version.

Radiated Emission Conducted Emission