2AAIB3880900Mickey Train Track Set

3+ In the interest of better quality and value, we are constantly improving and updating our products. Consequently, pictures on this package may vary from the product enclosed. Please retain this address for future reference. CAUTION: Have an adult remove and dispose of all packaging, ties and fasteners before use. PRINTED IN CHINA https://twitter.com/JustPlayToys https://facebook.com/JustPlay https://pinterest.com/JustPlayToys http://instagram.com/justplayproducts Follow Just Play on: justplayproducts.com For questions or comments please call: 1-800-317-3245 Or write: [email protected] Visit us at: www.justplayproducts.com CONFORMS TO THE SAFETY REQUIREMENTS OF ASTM F963. Battery Safety Information Questions or Comments Battery Instructions 1. Remove batteries when not in use or discharged. 2. Do not mix old and new batteries. 3. Do not use rechargeable batteries. 4. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Replacement of batteries must be done by an adult. Dispose of batteries safely. Never dispose of batteries in fire, as they may leak and explode. Product is shipped in “OFF” mode. Please switch from “OFF” to “ON” for normal play mode. CAUTION : Changes or modification not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures : Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. IC: 20570-38809 Model: 38809/38054 Modèle: 38809/38054 This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: This device may not cause interference. This device must accept any interference, including interference that may cause undesired operation of the device. L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : L’appareil ne doit pas produire de brouillage; L’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement. To Play Hook the cars together and place them on the track. Make sure the engine is in front and align all wheels on the track. 1 3 Switch from “OFF” to “ON” to start Play mode. 5 Just Play logo © 2022 Just Play, LLC. 4850 T-Rex Ave, Suite 100 Boca Raton, FL 33431, USA Content List WARNING: CHOKING HAZARD-Small parts. Not for children under 3 years. ! Adult Assembly Required Controller: Requires 2 x “AAA” (R03) batteries (included). Train: Requires 3 x “AAA” (R03) batteries (included). Train Station Base Train Station Piano Shop Bell Tower 4 1 2 3 Post Office Directional Arrow Flags x 2 Motorized Train 8 5 6 7 Cargo Cart Play Piano Mail Sack Controller 12 9 10 11 Billboard Railings x 2 Track Switch Bridge Track (1-8) Pieces x 22 16 13 14 15 17 Instruction Manual Mickey Mouse Train Track Set • Hold the remote controller with the stick facing you. Point the remote controller toward the train and push the stick forward . The train moves forward around the track. • Pull the stick back a little to stop the vehicle . • Pull the stick all the way back and the vehicle travels in reverse . Release the stick to stop . You can also play without the remote controller. • Press the button on top of the second train. • Pressing once will move the train forward. • Pressing again will stop the train. • Pressing twice in succession will move the train backwards. Controller: Requires 2 x “AAA” (R03) batteries (included).Train: Requires 3 x “AAA” (R03) batteries (included). 1.5V AAA/R03 1.5V AAA/R03 OPEN CLOSE 1.5V AAA/R03 1.5V AAA/R031.5V AAA/R03 OPEN CLOSE OPEN CLOSE 2.4GHz FCC ID: 2AAIB3880900 OFFON Rotate station to choose a different direction. Billboard pops up as train passes. Make sure to push back down. Push the mail into the train cart. Power ButtonReady Light Switch from "OFF" to "ON" to start Play mode on the Train. 2 TRY MEOFFON Hint: We do not recommend using the engine on carpets. For best performance, use on the track provided or hard, flat surfaces. Hints: • If you do not operate the remote controller for two minutes, the vehicle shuts off. Press the vehicle power button and operate the remote controller to restart. • This toy works best if you have a clear path between the remote controller and the vehicle. • Point the remote controller at the vehicle. The maximum range of the remote controller is about 12 feet (3.66 m). • Wipe the toy with a clean, damp cloth.…

Text truncated - open the document above for the full version.

is 11 MAY, 2022. The Limited Agency Agreement 10 th Floor | Mirror Tower No. 61 Mody Road | Tsim Sha Tsui East, Kowloon T: (852) 2164 3000 F: (852) 2164 3100 Date: 11 MAY, 2022 Federal Communications Commission 445 12 th Street SW Washington, DC 20554 Subject: Limited Agency Agreement Just Play (HK) Ltd. FCC ID: 2AAIB3880900 To Whom It May Concern: We, Just Play (HK) Ltd, hereby authorized Intertek Testing Services to act as our Agent for the purpose of preparing application for FCC ID number 2AAIB3880900 under all applicable parts of the FCC rules and regulations. The effective date of this limited agency agreement expires on 31 DEC, 2023, unless sooner terminated or extended by written notice to Intertek Testing Services and the Federal Communications Commission. This is to advise that we are in full compliance with the Anti-Drug Abuse Act. The applicant is not subject to a denial of federal benefits pursuant to Section 5301 of the Anti-Drug Act of 1988, 21 U.S.C. 862, and no party to the application is subject to a denial of federal benefits pursuant to that section. If you have any questions or comments, please do not hesitate to contact me. Sincerely, Date: 11 MAY, 2022 Name: Leo koo Title: Senior QA / QC Manager Tel: 852-2164 3000 Fax: 852-2164 3100 Company: Just Play (HK) Ltd Address: 10 th Floor, Mirror Tower, No. 61 Mody Rd, Tsim Sha Tsui East, Kln, HK Email: [email protected]

10 th Floor | Mirror Tower No. 61 Mody Road | Tsim Sha Tsui East, Kowloon T: (852) 2164 3000 F: (852) 2164 3100 Attention: Certification reviewer RE: Request for Confidentiality FCC ID: 2AAIB3880900 To Whom It May Concern: Permanent Confidentiality Request to withhold permanently from public review certain portions of the application for equipment certification for the referenced FCC identifiers. This request for confidentiality is made pursuant to 47 CFR 0.457(d) and 0.459 of the FCC Rules. In particular, the following sections of the application are to be kept permanently confidential: Schematics Block Diagrams Operational Description Rationale for request for confidentiality: We have invested considerable time and materials in research and development to produce the referenced product. Permanent confidentiality: Disclosure of the permanently confidential portions of this application to competitors would not only give them significant competitive advantages in developing similar products, but would also disclose successful implementation of unpublished, leading edge technology developed by us. If you have questions or need further information, please contact the undersigned. Sincerely, Date: 19 MAY, 2022 Name: Leo Koo Title: Senior QA / QC Manager Tel: 852-2164 3000 Fax: 852-2164 3100 Company: Just Play (HK) Ltd Address: 10 th Floor, Mirror Tower, No. 61 Mody Rd, Tsim Sha Tsui East, Kln, HK Email: [email protected]

Page 1 of 2 External Photos Page 2 of 2

Label Artwork and Location Size: 22.65mm(W) x 14.99mm(H)

Page 1 of 2 Internal Photos Page 2 of 2

INTERTEK TESTING SERVICES RF Exposure The equipment under test (EUT) is a Mickey Train Track Set operating at 2.4G Band. The EUT can be powered by DC 3.0V (2 x 1.5V AAA batteries).For more detail information pls. refer to the user manual. Antenna Type: Integral antenna Modulation Type: GFSK Antenna Gain: 0dBi The nominal conducted output power specified: -10.0 dBm (±3dB) The nominal radiated output power (e.i.r.p) specified: -10.0 dBm (±3dB) According to the KDB 447498: The Maximum peak radiated emission for the EUT is 84.4 dBμV/m at 3m in the frequency 2460MHz The EIRP = [(FS*D) ^2 / 30] mW = -10.83dBm which is within the production variation. The Minimum peak radiated emission for the EUT is 83.9 dBμV/m at 3m in the frequency 2420MHz The EIRP = [(FS*D) ^2 / 30] mW = -11.33dBm which is within the production variation. The maximum conducted output power specified is -7dBm= 0.200mW The source- based time-averaging conducted output power =0.200* Duty cycle mW <0.200 mW(Duty cycle <100%) The SAR Exclusion Threshold Level: 푃 th (mW) = ERP 20cm * (푑/20cm) 푥 (X= ) = 3060 * (0.5/20) 1.9 mW = 2.72 mW Since max. power of the source-based time-averaging conducted output power and effective radiated power (ERP) is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. The duty cycle is simply the on-time divided by the period: The duration of one cycle = 24.2319ms Effective period of the cycle = 0.9855ms x 4 = 3.942ms DC =3.942ms / 24.2319ms =0.1627 or 16.27% FCC ID: 2AAIB3880900

Just Play (HK) Limited TEST REPORT SCOPE OF WORK FCC TESTING– MODEL:38809 REPORTNUMBER SZHH01684993-001 ISSUE DATE MAY 20, 2022 PAGES 24 DOCUMENT CONTROL NUMBER FCC ID 249_C © 2017 INTERTEK Intertek Report No.:SZHH01684993-001 This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to permit copying or distribution of this report and then only in its entirety. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results in this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. Intertek Testing Service Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, People’s Republic of China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Version: 01-November-2017 Page:1 of 24 FCC ID 249_C Test Report Just Play (HK) Limited Application for Certification FCC ID: 2AAIB3880900 Mickey Train Track Set Model: 38809 Additional Model No.: 38054 2.4GHz Transmitter Report No.: SZHH01684993-001 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [10-1-20] Prepared and Checked by: Approved by: Sign on file Terry Tang Assistant Supervisor Peter Kang Technical Supervisor Date: May 20, 2022 Intertek Report No.:SZHH01684993-001 Version: 01-November-2017 Page:2 of 24 FCC ID 249_C Test Report MEASUREMENT/TECHNICAL REPORT This report concerns (check one:) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-20Edition] provision. Report prepared by: Terry Tang Intertek Testing Services Shenzhen Ltd. Longhua Branch 101, 201, Building B, No. 308 Wuhe Avenue, Zhangkengjing Community GuanHu Subdistrict, LongHua District, Shenzhen, People’s Republic of China Tel / Fax: 86-755-86016288/86-755-86016751 Intertek Report No.:SZHH01684993-001 Version: 01-November-2017 Page:3 of 24 FCC ID 249_C Test Report Table of Contents 1.0 Summary of Test Result ..................................................................................... 4 2.0 General Description ............................................................................................ 5 2.1Product Description ............................................................................................. 5 2.2Related Submittal(s) Grants ................................................................................ 5 2.3Test Methodology ................................................................................................ 5 2.4Test Facility ........................................................................................................ 5 3.0 System Test Configuration ................................................................................. 6 3.1 Justification ........................................................................................................ 6 3.2EUT Exercising Software ..................................................................................... 6 3.3Special Accessories ............................................................................................ 6 3.4Equipment Modification ....................................................................................... 6 3.5 Measurement Uncertainty .................................................................................. 6 3.6 Support Equipment List and Description ............................................................. 6 4.0Emission Results ................................................................................................. 7 4.1 Radiated Test Results ........................................................................................ 7 4.1.1 Field Strength Calculation ................................................................................ 7 4.1.2 Radiated Emission Configuration Photograph .................................................. 8 4.1.3Radiated Emissions .......................................................................................... 8 4.1.4 Transmitter Spurious Emissions .................................................................... 11 5.0 Equipment Photographs ................................................................................... 15 6.0Product Labelling ............................................................................................... 15 7.0Technical Specifications .................................................................................... 15 8.0Instruction Manual ............................................................................................. 15 9.0Miscellaneous Information ................................................................................ 16 9.1 Bandedge Plot ................................................................................................. 16 9.220dB Bandwidth ...............................................................................................…

Text truncated - open the document above for the full version.

Page 1 of 2 Radiated Photos Up to 1GHz (The EUT placed at the center of the turntable) Page 2 of 2 Above 1GHz (The EUT placed at the center of the turntable)