2AAIC00002DRIVE 2.0, CAR, SKULL

Product Information Guide (English) Produktinformationen (Deutsch) Guide d’information sur le produit (Français Québécois) Guide produit (Français) Handleiding met productinformatie (Nederlands) Guida informativa sul prodotto (Italiano) Guía informativa del producto (Español) Guia de Informações do Produto (Português) Termékinformációk – útmutató (Magyar) Příručka k výrobku (Čeština) Ürün Bilgi Kılavuzu (Türkçe) Informacje o produkcie (Polski) جتنملا تامولعم ليلد ENGLISH CAUTION - ELECTRIC TOY: Not recommended for children under 8 years of age. As with all electric products, precautions should be observed during handling and use to prevent electric shock. CAUTION - It is recommended that parents examine this toy power supply (transformer) model 000-00004 (US/CAN) or 605-00001 (US/CAN/UK/EU/AUS) periodically for conditions that may result in risk of fire, electric shock, or injury to persons (such as damage to the output cord, blades, housing, or other parts) and in the event of such conditions, the transformer should not be used until properly repaired. Do not allow children to play with the transformer—it is not a toy. CAUTION - Do not attempt to charge non-rechargeable batteries with the provided power adapter (transformer). Attempting to charge a non- rechargeable battery can cause an explosion and/or fire. CAUTION - Battery is only to be charged by adults or by children at least 8 years old. WARNING: To avoid damage or injury, charge only with an Anki provided power adapter (transformer) and cable. TRANSFORMER DETAILS: North American Transformer Anki, Inc. Model Number: 000-00004 INPUT: 120V~ - 60Hz 500mA OUTPUT: 5V 2000mA UK/EU/AU/US Transformer Anki, Inc. Model Number: 605-00001 INPUT: 100 - 240V~ 50 - 60Hz 500mA OUTPUT: 5V 2000mA WARNING: Do not step on track pieces. The surface is slippery and it may shift underfoot, which could cause you to slip and fall. WARNING: Anki OVERDRIVE™ and its accessories may contain small parts, which can present a choking hazard to small children. Keep such parts away from small children. WARNING: Choking Hazard - Small Parts NOT SUITABLE FOR CHILDREN UNDER 3 YEARS. WARNING: This product contains small magnets. Swallowed magnets can stick together across intestines causing serious infections or death. Seek immediate medical attention if magnets are swallowed or inhaled. WARNING: Long cable. Strangulation hazard. WARNING: If you have epilepsy or have had seizures or other unusual reactions to flashing lights or patterns, consult a doctor before playing mixed-reality games (combined video and physical games). FCC Compliance: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. RESPONSIBLE PARTY FOR FCC MATTERS: Anki, Inc. Attn: FCC Liaison 55 Second Street, 15th Floor San Francisco, CA 94105 23 This device complies with industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canada ICES-003. CE COMPLIANCE STATEMENT This product complies with the requirements of European Directives. For more details on compliance, visit anki.com/support. BATTERY INFORMATION Each Anki OVERDRIVE Supercar has a lithium polymer battery, which should only be recharged using the included power cord and charging platform. Attempting to remove the rechargeable battery will void the warranty and may result in injury. Protect the environment by not disposing of this product with household waste. Do not dispose of this product in a fire. The rechargeable lithium battery inside may explode or leak. Check your local authority for recycling advice and facilities. Disposal, recycling, and other environmental information related to Anki OVERDRIVE can be found online at: anki.com/support or http://ec.europa.eu/environment/waste/batteries. EUROPEAN UNION – DISPOSAL INFORMATION The symbol above means that according to local laws and regulations your product should be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities. Some collection points accept products for free. The separate collection and recycling of your product at the time of disposal will help conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. Keep these instructions for f…

Text truncated - open the document above for the full version.

January 15, 2015

FCC ID2AAIC0000 January 15, 2015

External Photos Model: 100-00018 Model: 100-00018 Model: 000-00032 Model: 000-00033 Model: 100-00017

Label Artwork and Location 11.90±0.15

Internal Photos (Model: 100-00018) Antenna

INTERTEK TESTING SERVICES FCC ID: 2AAIC00002 1 Analysis Report The equipment under test (EUT) is an Anki Drive car KOURAI (yellow) with Bluetooth (4.0 single mode) function. The EUT was powered by 1 x 3.7V Rechargeable Battery which can be charged by charger, but it can’t use Bluetooth function while charging. For more detail information pls. refer to the user manual. Modulation Type: GFSK Bluetooth Version: 4.0 (Single Mode) Antenna Type: Integral antenna Antenna Gain: 0dBi The nominal radiated output power (e.i.r.p) specified: 5.0dBm (tolerance: +/- 3 dB) The nominal conducted output power specified: 5.0dBm (tolerance: +/- 3dB) According to the KDB 447498: The Maximum peak radiated emission for the EUT is 102.2dBμV/m at 3m in the frequency 2402MHz The EIRP = [(FS*D) ^2 / 30] mW = 7.0dBm which is within the production variation. The Minimum peak radiated emission for the EUT is 100.2dBμV/m at 3m in the frequency 2480MHz The EIRP = [(FS*D) ^2 / 30] mW = 5.0dBm which is within the production variation. The maximun conducted output power specified is 8.0 dBm = 6.3mW The source- based time-averaging conducted output power = 6.3 * Duty cycle mW= 6.3 mW The SAR Exclusion Threshold Level: = 3.0 * (min. test separation distance, mm) / sqrt(freq. in GHz) = 3.0 * 5 / sqrt (2.480) mW = 9.5 mW Since the source-based time-averaging conducted output power is well below the SAR low threshold level, so the EUT is considered to comply with SAR requirement without testing. Transmitter Duty Cycle Calculation The test signal of the EUT is Continuous emission, the Duty Cycle is 100%.

Date: 18.DEC.2014 10:19:44 Date: 18.DEC.2014 10:29:08

Date: 18.DEC.2014 10:20:46 Date: 18.DEC.2014 10:29:58

• The test results reported in this test report shall refer only to the sample actually tested and shall not refer or be deemed to refer to bulk from which such a sample may be said to have been obtained. • This report is for the exclusive use of Intertek's Client and is provided pursuant to the agreement between Intertek and its Client. Intertek's responsibility and liability are limited to the terms and conditions of the agreement. Intertek assumes no liability to any party, other than to the Client in accordance with the agreement, for any loss, expense or damage occasioned by the use of this report. Only the Client is authorized to copy or distribute this report. Any use of the Intertek name or one of its marks for the sale or advertisement of the tested material, product or service must first be approved in writing by Intertek. The observations and test results referenced from this report are relevant only to the sample tested. This report by itself does not imply that the material, product, or service is or has ever been under an Intertek certification program. • For Terms And Conditions of the services, it can be provided upon request. • The evaluation data of the report will be kept for 3 years from the date of issuance. TRF No.: FCC 15C_TX_b Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, D Block, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Tel: (86 755) 8601 6288 Fax: (86 755) 8601 6751 Website: www.china.intertek-etlsemko.com Anki, Incorporated Application For Certification FCC ID: 2AAIC00002 DRIVE 2.0, CAR, SKULL Additional Names: Anki DRIVE 2.0 Starter Kit, DRIVE 2.0, CAR, Ground Shock, Anki DRIVE 2.0 Expansion Car-NUKE, Anki DRIVE 2.0 Expansion Car-THERMO Model: 100-00018 Additional Models: 100-00017, 000-00032, 000-00033 2.4GHz Transceiver Report No.: SZHH00922281-001 We hereby certify that the sample of the above item is considered to comply with the requirements of FCC Part 15, Subpart C for Intentional Radiator, mention 47 CFR [ 10-1-13] Prepared and Checked by: Approved by: Sign on file Jimmy Wen Engineer Andy Yan Senior Project Engineer Date: February 11, 2015 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AAIC00002 i LIST OF EXHIBITS INTRODUCTION EXHIBIT 1: General Description EXHIBIT 2: System Test Configuration EXHIBIT 3: Emission Results EXHIBIT 4: Equipment Photographs EXHIBIT 5: Product Labelling EXHIBIT 6: Technical Specifications EXHIBIT 7: Instruction Manual EXHIBIT 8: Miscellaneous Information EXHIBIT 9: Test Equipment List INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AAIC00002 ii MEASUREMENT/TECHNICAL REPORT Anki, Incorporated- MODEL: 100-00018 FCC ID: 2AAIC00002 This report concerns (check one :) Original Grant X Class II Change Equipment Type: DXX - Part 15 Low Power Communication Device Transmitter Deferred grant requested per 47 CFR 0.457(d)(1)(ii)? Yes No X If yes, defer until: date Company Name agrees to notify the Commission by: date of the intended date of announcement of the product so that the grant can be issued on that date. Transition Rules Request per 15.37? Yes No X If no, assumed Part 15, Subpart C for intentional radiator − the new 47 CFR [10-1-13 Edition] provision. Report prepared by: Jimmy Wen Intertek Testing Services Shenzhen Ltd. Kejiyuan Branch 6F, Block D, Huahan Building, Langshan Road, Nanshan District, Shenzhen, P. R. China Phone: (86 755) 8614 0713 Fax: (86 755) 8601 6751 INTERTEK TESTING SERVICES TRF No.: FCC 15C_TX_b FCC ID: 2AAIC00002 iii Table of Contents 1.0 General Description .................................................................................................................................. 2 1.1 Product Description ..................................................................................................................................... 2 1.2 Related Submittal(s) Grants ....................................................................................................................... 2 1.3 Test Methodology ........................................................................................................................................ 2 1.4 Test Facility ................................................................................................................................................. 3 2.0 System Test Configuration ..................................................................................................................... 5 2.1 Justification .................................................................................................................................................. 5 2.2 EUT Exercising Software ............................................................................................................................ 5 2.3 Special Accessories .................................................................................................................................... 5 2.4 Equipment Modification .............................................................................................................................. 5 2.5 Measurement Uncertainty .......................................................................................................................... 6 2.6 Support Equipment List and Description ................................................................................................... 6 3.0 Emission Results ...................................................................................................................................... 8 3.1 Radiated Test Results................................................................................................................................. 9 3.1.1 Field Strength Calculation .......................................................................................................................... 9 3.1.2 Radiated Emission Configuration Photograph ....................................................…

Text truncated - open the document above for the full version.

Radiated Photos