2AAJ7-5329325Smart Body Composition Scale

Smart Body Composition Scale with Body Fat, Body Water, Muscle Mass, BMI, BMR, and Weight Tracking INSTRUCTIONS FOR USE Precision Hub app 1-866-843-3905 (8-5pm MST, M-F) www.taylorusa.com [email protected] 1. Insert 2 AAA (1.5V) batteries (included). 2. Place the scale on a hard, flat surface. 3. Scan QR code and download the free Precision Hub app. 4. Set up your user profile within the Precision Hub app. 5. Non-app user should manually create the user profile (P1-P8) from the scale before measuring. Press “s” or “t” select a profile number (P1 to P8) Press “s” or “t” select gender/athlete Press “s” or “t” set height Press “s” or “t” set age 6. Scale is ready to weigh. 8 IB5329325A CP5329325 4.26 WC ©2026 Taylor, a division of Lifetime Brands, Inc. All rights reserved. Oak Brook, IL, 60523 Made in China. FCC ID: 2AAJ7-5329325 Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. We declare under our sole responsibility that the above-referenced product has been tested according to FCC requirements, and this device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Party issuing Supplier’s Declaration of Conformity & Respon- sible party – U.S. Contact information: Taylor division of Lifetime Brands Inc. 2311 W. 22nd Street, Suite 200 Oak Brook, IL 60523 Equipment: Product Name: Smart Body Composition Scale Model No.: 5329325 Trade Name: Taylor FCC INFORMATION Scale Setup & Calibration IMPORTANT SAFETY INFORMATION The TAYLOR Smart Body Composition Scale is intended for home use for weight measurement and estimation of body composition metrics for informational purposes only. The scale and the associated Precision Hub™ app are designed to be used as tools for tracking changes in body composition over time to support a healthy lifestyle. This product is not intended to diagnose, treat, mitigate, or prevent any disease or health condition. The measurements and data provided by this device are estimates and should not be used as a basis for medical diagnosis or treatment. The information provided by this scale is not a substitute for professional medical advice, diagnosis, or treatment. Users should always consult with a qualified healthcare professional for any health concerns or before making any decisions related to their health. This includes, but is not limited to, starting a new diet or exercise program. Do not disregard professional medical advice or delay in seeking it because of something you have read or interpreted from the measurements of this device or the associated application. Model# 5329325 FCC Radiation Exposure Stament: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. IC Radiation Exposure statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Not for diagnostic use. Not a medical device. Not legal for trade. DURING MEASUREMENT • Place your feet in the same position every time you weigh yourself. Stand still during measurement. • Weigh yourself without clothing whenever possible. Clothes can vary in weight. • Place the scale where it won’t be bumped while being activated or while in use, as an inaccurate reading may occur. • For the most consistent readings, weigh yourself at the same time of day, for the best results early in the morning, as weight can fluctuate due to food or drink in your system. • User Type Modes - Standard/Athlete/Baby/Pet can be selected in the Precision Hub App. See the Helpful Hints guide for app instructions. Press “q” to power on scale NOTE: This scale can be used with and without the Precision Hub app. ISED compliance statement: This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s license- exempt RSS(s). Operation is subject to the following two conditions: (1) This device may not cause interference. (2) This device must accept any interference, including interference that may cause undesired operation of the device. 3 Front & back view of scale LCD readout description Getting to know your scale Proper Foot Placement Stand barefoot on the scale, ensuring your feet make full contact with the metal electrodes. Interpreting body composition readings If your body fat percentage, for example, is 29.4% and you need some help understanding these results, please refer to t…

Text truncated - open the document above for the full version.

UNITED STATES DESIGNATED AGENT LETTER TO: Federal Communication Commission Equipment Authorization B「anch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD 2AAJ7 Date: 2026-03-26 U.S. designated agent Company Name: United Consulting Technology Services Co., Ltd FRN Grantee Code FRN: 0022805923 Contact Name: Shang Xiaona Contact Name 0033495714 David Wu Address· Telephone· Ema仆 Block 48, Changxing Industrial Address Zone, Changzhen Community, Yutang Street, Guangming District, Shenzhen, 518132 China 8675533506585 [email protected] Telephone: Email: Applicable Equipment: FCC ID: 2AAJ7-5329325 ATTN: Director of Cert巾cation 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 91748 United States (626) 217-4022 Dawd@uc-ts com We, SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. and United Consulting Technology Services Co., Ltd.understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above We, SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. and United Consulting Technology Services Co., Ltd.acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States lo「no less than one yea「after either the grantee has permanently terminated all ma「ketingand importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment whichever is later Applicant Name (Printed): Shang X1aona Title: Test engineer Signature 纨几 呼 也()汕 U.S. designated agent Na me (Printed): Title: CEO Signature:

SGS North America Inc. 620 Old Peachtree Road SUITE 100 Suwanee, Georgia 30024 United States Applicant Declaration Applicant Legal Business Name SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District, Shenzhen, 518132 China FRN 0022805923 Grantee Code 2AAJ7 FCC ID: 2AAJ7-5329325 Authorized Contact Name Shang Xiaona Contact Phone 8675533506585 Contact Email I, the undersigned, certify that I am an authorized signatory for the Applicant and therefore declare; a) in accordance with 47CFR2.91 1 (d), all of the statements herein and the exhibits attached hereto are true and correct to the best of my knowledge and belief. b) in accepting a Grant of Equipment Authorization issued by a TCB, under the authority of the FCC, as a result of the representations made in this application, the Applicant is responsible for: (1) labeling the equipment with the exact FCC ID as specified in this application, (2) compliance statement labeling pursuant to the applicable rules, (3) compliance of the equipment with the applicable technical rules, c) if the Applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC’s technical requirements. d) in accordance with 47 CFR 2.909 and KDB39432 1 , the Applicant has read, understood and agrees to accept that they are the responsible party and agree to abide by their responsibilities as specified under 47 CFR 2.909 and KDB394321 . e) in accordance with ISO 17065, FCC KDB641 163, FCC KDB610077, KDB394321 and RSP-100, the Applicant has read, understood, accepts and agrees to abide by the post market surveillance requirements. (1) the Applicant understands, accepts and agrees that a sample may be requested for surveillance testing. (2) the Applicant shall make provisions to always have a production sample available upon request by SGS, FCC and/or ISED. (3) the Applicant shall, upon request by SGS, at the Applicant’s expense, provide a production sample of the requested product to SGS, FCC and/or ISED as instructed. The sample shall include all support devices, cables, software, accessories or other hardware or software required for evaluation, review, certification and audit surveillance of products certified by SGS. f) neither the Applicant nor any party to the application is subject to a denial of Federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. §862 because of a conviction for possession or distribution of a controlled substance. See 47CFR 1 .2002(b) for the definition of a “party” for these purposes. g) the Applicant has read, understood, accepts and agrees to abide by the SGS North America, Inc. terms and conditions as specified in the TCB Application Form 731 (QSF27-14-01). Link to CFRs: https://www.fcc.aov/wireless/bureau-divisions/technoloqies-svstems-and-innovation-division/rules-requlations-titie-47 Link to KDBs: https://apps.fcc.gov/oetcf/kdb/index.cfm Link to RSP-1 00: https://www.ic.qc.ca/eic/site/smt-qst.nsf/eno/sf01130.html Link to the Covered List: Covered List *N0TE: This declaration cannot be signed by an Agent, it shall be signed by an authorized person listed in the FCC database Applicant Signature: Date: 2026-03-26 Print Name: Shang Xiaona Title: Test engineer QSF27-14-04 Rev 1.4 April 25, 2025 Page 1 of 1 Original Issue: Jan. 4, 2021 [email protected]

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 1 of 4 External Photos for SZCR2603001210AT FCC ID: 2AAJ7-5329325 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 4 of 4 - End of the Appendix -

ealthcare PrecisionHubAPP Rg FCCID:2AAJ7-5329325 Model#5329325TAY LO R® S m art B od y C o mpo s i t i on S c a le PLEASEREADINSTRUCTIONSBEFOREUSING N ot lega lfo rtrade I Ma d ei nCh i n a taylorusa@lifeti m ebra nds.com 1 2220EntradadelSol Suite A, LasCruces I NM 88001 USA 1 1 -866-843 - 3905 This device complies with part 15ofthe FCCRules. Operation is subject tothe following twoconditions: (1 1 Thisdevice may notcauseharmful interference, and (2) Thisdevicemust accept any interference received, including interferencethat may causeundesired operation, PL5329325A 2.5" 63.50 mm * R'J': 63.5X38.1MM Size:63.5X38.1MM Material:Selfadhesiveand light adhesive * COLOR: White/Black DocumentVersion No:N/A Prepared by SBLb^iJ Ratio HuDai Qun 1:1 Checked by Page No. Vicky 1/1 Date I®* Version No. 2026-5-22 V0 Label location

Label for 5329325 scale 3/10/26 WCII 3.4" 1.5" PLEASE READ INSTRUCTIONS BEFORE USING Not legal for trade | Made in China Model# 5329325 [email protected] | 2220 Entrada del Sol Suite A, Las Cruces | NM 88001 USA | 1-866-843-3905 Smart Body Composition Scale This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. FCC ID: 2AAJ7-5329325 Precision Hub APP PL5329325A

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 1 of 3 Internal Photos for SZCR2603001210AT FCC ID: 2AAJ7-5329325 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 2 of 3 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 3 of 3 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121003 Page: 1 of 11 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2603001210AT Applicant: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Applicant: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Manufacturer: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Manufacturer: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Factory: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Factory: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Equipment Under Test (EUT): EUT Name: Smart Body Composition Scale Model No.: 5329325, FG7602BT   Please refer to section 3 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: FCC ID: 2AAJ7-5329325 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-03-25 Date of Evaluation: 2026-03-30 to 2026-04-03 Date of Issue: 2026-04-09 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121003 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2026-04-09 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121003 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 4.4 RF Exposure Test Exemptions for Simultaneous Transmission ........................................................ 9 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 10 6 EUT Constructional Details (EUT Photos) ........................................................................................... 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121003 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: 3V DC (1.5V x 2 "AAA" Size Batteries) Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: -11.56dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Remark: Model No.: 5329325, FG7602BT Only the model 5329325 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference being of appearance, software, color and client. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121002 Page: 1 of 63 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2603001210AT Applicant: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Applicant: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Manufacturer: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Manufacturer: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Factory: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Factory: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Equipment Under Test (EUT): EUT Name: Smart Body Composition Scale Model No.: 5329325, FG7602BT   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: FCC ID: 2AAJ7-5329325 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-03-25 Date of Test: 2026-03-30 to 2026-04-03 Date of Issue: 2026-04-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121002 Page: 2 of 63 Revision Record Version Chapter Date Modifier Remark 01 2026-04-09 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121002 Page: 3 of 63 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Remark: Model No.: 5329325, FG7602BT Only the model 5329325 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference being of appearance, software, color and client. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121002 Page: 4 of 63 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 7 4.4 Test Location ...................................................................................................................................... 8 4.5 Test Facility ........................................................................................................................................ 8 4.6 Deviation from Standards ................................................................................................................... 8 4.7 Abnormalities from Standard Conditions ........................................................................................... 8 5 Equipment List .......................................................................................................................................... 9 6 Radio Spectrum Technical Requirement ............................................................................................. 11 6.1 Antenna Requirement ...................................................................................................................... 11 6.1.1 Test Requirement: ....................................................................................................................... 11 7 Radio Spectrum Matter Test Results .................................................................................................... 12 7.1 Radiated Emissions which fall in the restricted bands ..................................................................... 12 7.1.1 E.U.T. Operation ..................................................…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 1 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 ANTENNA PASSIVE TEST REPORT Application No.SZOA2603000072HS ApplicantSHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. ManufacturerSHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Product NameOn-board Antenna Model No.AT02 StandardsANSI/IEEE Std 149-2021 Date Initial Sample(s) ReceivedApr. 22, 2026 Testing Start DateApr. 22, 2026 Testing Finish DateApr. 23, 2026 Report Issue DateMay. 07, 2026 *In the configuration tested, the EUT detailed in this report complied with the standards specified above. Prepared by: Yuanyu Luo/ Test Engineer Approved by: Ervin Li/ Technical Manager ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 2 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 Revision History RevisionIssue DateDescription 01May. 07, 2026Initial creation of report ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 3 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 TABLE OF CONTENTS 1GENERAL INFORMATION....................................................................................................4 1.1Testing Laboratory..............................................................................................................................4 1.2Details of Applicant.............................................................................................................................4 1.3Details of Manufacturer......................................................................................................................4 1.4General Description of EUT..................................................................................................................5 1.5Test Procedure....................................................................................................................................5 1.6Test Specification................................................................................................................................6 1.7Laboratory Environment......................................................................................................................6 2OTA MEASUREMENTS SYSTEM CONFIGURATION......................................................7 2.1Test Configuration...............................................................................................................................7 3TEST EQUIPMENT LIST.......................................................................................................8 4MEASUREMENT UNCERTAINTY.......................................................................................9 5TEST RESULTS.....................................................................................................................10 6PATTERN PLOTS.................................................................................................................12 6.1Return Loss........................................................................................................................................12 6.2VSWR................................................................................................................................................13 6.3Stimulus............................................................................................................................................14 72-D ANTENNA PATTERN..................................................................................................15 83-D ANTENNA PATTERN..................................................................................................16 9THE EUT AND TEST CONFIGURATION.........................................................................17 ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 4 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 1General Information 1.1Testing Laboratory Test Lab SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Address No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nans…

Text truncated - open the document above for the full version.