2AAJ7-5345339Weight Tracking Smart Scale

IB5345339B 8 Weight Tracking Smart Scale INSTRUCTIONS FOR USE & WARRANTY INFORMATION CP 5345339 3.26 WC 1-866-843-3905 (8-5pm MST, M-F) www.taylorusa.com [email protected] One (1) Year Limited Warranty MODEL # 5345339 Scale Setup & Calibration Precision Hub app 1. Insert 2 AAA (1.5V) batteries (included). 2. Place the scale on a hard, flat surface and toe tap to turn the scale on and to calibrate. 3. Scan QR code and download the free Precision Hub app. 4. Set up your user profile within the Precision Hub app. 5. The scale is ready to weigh. FCC ID: 2AAJ7-5345339 This scale is warranted against defects in materials of workmanship (excluding batteries) for one (1) year for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. Do not return to retailer. For product support & warranty information: Please contact us with proof of purchase (purchase receipt) at: TAYLOR 2220 Entrada Del Sol, Suite A Las Cruces, New Mexico 88001 USA Phone: 1-866-843-3905 Email: [email protected] There are no express warranties except as listed above. This warranty gives you specific legal rights, and you may have other rights which vary from state to state. For additional product information or warranty information outside the USA, please contact us through www.taylorusa.com. ©2026 Taylor, a division of Lifetime Brands, Inc. All rights reserved. Oak Brook, IL, 60523 Made to our exact specifications in China. Not legal for trade. 3 2 Proper Foot Placement Carefully step barefoot on the scale, ensuring your feet are evenly placed in the middle of the scale. Stand still while your weight is being measured. The scale will count up to your weight and lock it in. The scale will hold the display with the weight showing. The scale turns off automatically after use. DETAILED INFORMATION ON HOW TO INSERT THE BATTERIES 1. Insert the 2 'AAA' (1.5V) batteries (included). 2. Remove any plastic wrap from the batteries before installing. 3. Open the battery cover on the back of the scale unit. 4. Place the batteries into the battery compartment according to the “+” and “-” polarity symbols in the battery compartment. 5. Replace the battery compartment cover and screws if applicable. 6. If you do not intend to use the scale for a prolonged period of time, it is advisable to remove the batteries before storing. 7. Do not mix old and new batteries. • Always purchase the correct size and grade of battery most suitable for the intended use. • NOTE: Please recycle or dispose of batteries per local regulations. • WARNING: Batteries may pose a choking hazard. As with all small items, do not let children handle batteries. If swallowed, seek medical attention immediately. • PRECAUTION: Do not dispose of batteries in a fire. Batteries may explode or leak. • Remove the batteries if the product will not be used for a long period of time. Remove used batteries promptly. • Clean the battery contacts and also those of the device prior to battery installation. • Non-rechargeable batteries are not to be recharged. • Do not force discharge, recharge, disassemble, heat above 55°C, or incinerate. Doing so may result in injury due to venting, leakage, or explosion, resulting in chemical burns.” • Always replace all batteries at the same time; do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (Ni-Cad, Ni-MH, etc.) batteries. • When batteries of different brands or types are used together, or new and old batteries are used together, some batteries may be over-discharged due to a difference in voltage or capacity. This can result in venting, leakage, and rupture, and may cause personal injury. Battery Warnings! DURING MEASUREMENT • Place your feet in the same position every time you weigh yourself. Stand still during measurement. • Weigh yourself without clothing whenever possible. Clothes can vary in weight. • Place the scale where it won’t be bumped while being activated or while in use, as an inaccurate reading may occur. • For the most consistent readings, weigh yourself the same time of day, and for best results early in the morning, as weight can fluctuate due to food or drink in your system. 5 4 Troubleshooting Common IssuesCare & Maintenance 1. The platform will be slippery when it is wet. Keep it dry! However, do not expose to direct sunlight, extreme hot/cold temperatures, or humidity. 2. This scale is designed to read weights up to 550 lbs or 250 kgs. To prevent damage, do not place more than 550 lbs or 250 kgs on it. 3. DO NOT strike, shock, or drop the scale. 4. Treat the scale with care, as it is a precise instrument. Always keep your scale in a horizontal position. Do not store the scale on its side. 5. Clean the scale with a damp cloth and avoid water getting inside the scale. 6. DO NOT use chemical/abrasive cleaning agents. 7. Always keep your scale in a horizontal position. 8. If your scale fails to turn on, check whether batteries are installed or battery power is low. Insert or replace with new batteries. 9. Do not use for commercial purposes and follow all instructions provided in this manual. Error Icons This scale has a low battery indicator. It will display “Lo” or readings will grow dim or become irregular if the batteries need replacement. “Err” indicates an overload warning. The maximum capacity of this scale is 550 lbs / 250 kgs. Should “Err” appear on the display during a weighing, this indicates that the maximum weighing capacity of the scale has been exceeded. Remove the weight immediately; otherwise, permanent damage may occur.- 1. If the scale does not turn on or no weight is displayed? Check if the scale is powered up and started up. If not, please refer to the Section “Scale Setup & Calibration”. 2. If the scale is inaccurate or the weight varies? Place your feet in the center of the platform and stand still. Allow the wei…

Text truncated - open the document above for the full version.

Helpful Hints Model# 5345339 5345339 Digital Scale Download the Precision Hub App Scan Code NOTE: Due to improvements in software the APP may change in its appearance. Create your profile Using connecting technology pair your phone to the scale To get the latest and most up-to-date version of the App use the QR code. Scan the QR code to get the App DOWNLOAD APP IMPORTANT, RETAIN FOR FUTURE REFERENCE: READ CAREFULLY HOW TO USE YOUR SCALE 1 INSERT THE BATTERIES • 2 'AAA' (1.5V) batteries are included with your scale. 2 YOUR SCALE IS SET AT THE FACTORY TO WEIGH IN POUNDS (LB) • While the scale is on, press the “UNIT” unit button on the back of the scale to convert the weight unit to kg if needed. 3 SET THE SCALE IN THE RIGHT POSITION • Use only on a flat and hard floor surface. Do not use on carpets. Tap scale to activate 5 WEIGHING YOURSELF • With bare feet, step onto the scale and stand still while your weight is being measured. • The scale will count up to your weight and lock it in. The scale will hold the display with the weight showing. • The scale turns off automatically after use. 4 START-UP THE SCALE Step evenly on the platform with bare feet • Press firmly once on the scale platform to start up the scale. • The display shows “0.0” and then turns off. • The scale is ready for use. Note: If you move the scale at all, please repeat the steps above for best accuracy. Once your weight and BMI have been measured, they will be displayed in the app. The app will track your changes over time. Turn on your connecting technology phone settings then start the app and go to the overview screen. With bare feet, stand on your scale. Continue to stand still on the scale in bare feet. Note: The Taylor Smart Scale can be used with and without the Precision Hub App. Also, note that due to constant improvements to the app, the displays may appear different from what is shown in this guide. SAFETY WARNING • The warning signs and icons shown appear in order for you to use this product safely and correctly, as well as to prevent product damage, risk, and injury to you and others. PRECAUTION NOTICE • Do not disassemble the scale, as incorrect handling may cause injury. • Do not step on the scale when your body or feet are wet, especially after bathing or showering, to prevent slipping. IMPORTANT NOTICE TO USERS • Make sure to use only the type of battery stated in the manual. If you are having trouble synchronizing data, device connections, or other scale use questions, please refer to the help button in the app or the scale instruction manual for more detailed information. TROUBLESHOOTING RF QU5345339 3.26 WC TAYLOR 2220 Entrada Del Sol, Suite A Las Cruces, New Mexico 88001 USA Phone: 1-866-843-3905 Email: [email protected] ©2026 Taylor, a division of Lifetime Brands, Inc. All rights reserved. Oak Brook, IL, 60523 Made to our exact specifications in China. Not legal for trade. FCC ID: 2AAJ7-5345339

UNITED STATES DESIGNATED AGENT LETTER TO: Federal Communication Commission Equipment Authorization B「anch 7435 Oakland Mills Road Columbia, MID 21046 Applicant Company Name: Grantee Code: FRN: 0022805923 Contact Name: Address: Telephone: Email: SHENZHEN HEAL TH CARE ELECTRONIC TECHNOLOGY CO., LTD 2AAJ7 Shang Xiaona Block 48, Changxing Industrial Zone, Changzhen Community,Yutang Street, Guangming District, Shenzhen, 518132 China 8675533506585 [email protected] Applicable Equipment: FCC ID: 2AAJ7-5345339 ATTN: Director of Certification: Date: 2026-03-26 U.S. designated agent Company Name: United Consulting Technology Services Co., Ltd FRN: Contact Name: Address: Telephone: Email: 0033495714 David Wu 17800 CASTLETON ST STE 665 CITY OF INDUSTRY CA 91748 United States (626) 217-4022 Dawd@uc-ts com We, SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. and United Consulting Technology Services Co., Ltd.understand and acknowledge the applicants consent and the designated agent's obligation to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and e-mail of the designated agent listed above We, SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. and United Consulting Technology Services Co., Ltd.acknowledge the applicant's acceptance of its obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Applicant Name (Printed): Shang Xiaona Title: Test engineer SI gnatu re· 砰 叱 1 X如昭 U.S. designated agent Name (Printed): Title: Signature: David Wu CE O

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 1 of 4 External Photos for SZCR2603001211AT FCC ID: 2AAJ7-5345339 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 2 of 4 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 3 of 4 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A02 Rev.A/1 Page: 4 of 4 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 1 of 3 Internal Photos for SZCR2603001211AT FCC ID: 2AAJ7-5345339 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 2 of 3 EUT Constructional Details (EUT Photos) SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A03 Rev.A/1 Page: 3 of 3 - End of the Appendix -

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121103 Page: 1 of 11 Keny Xu EMC Laboratory Manager RF EXPOSURE EVALUATION REPORT Application No.: SZCR2603001211AT Applicant: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Applicant: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Manufacturer: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Manufacturer: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Factory: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Factory: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Equipment Under Test (EUT): EUT Name: Weight Tracking Smart Scale Model No.: 5345339, BG8041BT   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: FCC ID: 2AAJ7-5345339 Standard(s) : FCC Rules 47 CFR §2.1093 KDB 447498 D04 interim General RF Exposure Guidance v01 Date of Receipt: 2026-03-25 Date of Evaluation: 2026-03-30 to 2026-04-03 Date of Issue: 2026-04-09 Evaluation Result: Pass* * In the configuration evaluated, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121103 Page: 2 of 11 Revision Record Version Chapter Date Modifier Remark 01 2026-04-09 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121103 Page: 3 of 11 2 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Contents .................................................................................................................................................... 3 3 General Information .................................................................................................................................. 4 3.1 General Description of E.U.T. ............................................................................................................ 4 3.2 Details of E.U.T. ................................................................................................................................. 4 3.3 Separation Distance ........................................................................................................................... 4 3.4 Test Location ...................................................................................................................................... 5 3.5 Test Facility ........................................................................................................................................ 5 3.6 Deviation from Standards ................................................................................................................... 5 3.7 Abnormalities from Standard Conditions ........................................................................................... 5 4 FCC Radiofrequency radiation exposure limits .................................................................................... 6 4.1 Blanket 1 mW Blanket Exemption ...................................................................................................... 6 4.2 MPE-based Exemption ...................................................................................................................... 6 4.3 SAR-based Exemption ....................................................................................................................... 7 4.4 RF Exposure Test Exemptions for Simultaneous Transmission ........................................................ 9 5 Measurement and Calculation ............................................................................................................... 10 5.1 Maximum transmit power ................................................................................................................. 10 5.2 RF Exposure Calculation ................................................................................................................. 10 6 EUT Constructional Details (EUT Photos) ........................................................................................... 11 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121103 Page: 4 of 11 3 General Information 3.1 General Description of E.U.T. Product Type: Portable device Mobile device Fixed device 3.2 Details of E.U.T. Power supply: 3V DC (1.5V x 2 "AAA" Size Batteries) Operation Frequency: 2402MHz to 2480MHz Modulation Type: GFSK Number of Channels: 40 Channel Spacing: 2MHz Antenna Type: PCB Antenna Antenna Gain: -11.56dBi Remark: The information in this section is provided by the applicant or manufacturer, SGS is not liable to the accuracy, suitability, reliability or/and integrity of the information. Remark: Model No.: 5345339, BG8041BT Only the model 5345339 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference being of appearance, software, color and client. 3.3 Separation Distance Minimum test separation distance: 5mm Remark: This minimum test separation distance is determined by the smallest distance from the antenna and radiating structures or outer surface of the device, according to the host form factor, exposure conditions and platform requirements, to any part of the body or extremity of a user or bystander. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch S…

Text truncated - open the document above for the full version.

` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 1 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 ANTENNA PASSIVE TEST REPORT Application No.SZOA2603000072HS ApplicantSHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. ManufacturerSHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Product NameOn-board Antenna Model No.AT02 StandardsANSI/IEEE Std 149-2021 Date Initial Sample(s) ReceivedApr. 22, 2026 Testing Start DateApr. 22, 2026 Testing Finish DateApr. 23, 2026 Report Issue DateMay. 07, 2026 *In the configuration tested, the EUT detailed in this report complied with the standards specified above. Prepared by: Yuanyu Luo/ Test Engineer Approved by: Ervin Li/ Technical Manager ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 2 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 Revision History RevisionIssue DateDescription 01May. 07, 2026Initial creation of report ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 3 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 TABLE OF CONTENTS 1GENERAL INFORMATION....................................................................................................4 1.1Testing Laboratory..............................................................................................................................4 1.2Details of Applicant.............................................................................................................................4 1.3Details of Manufacturer......................................................................................................................4 1.4General Description of EUT..................................................................................................................5 1.5Test Procedure....................................................................................................................................5 1.6Test Specification................................................................................................................................6 1.7Laboratory Environment......................................................................................................................6 2OTA MEASUREMENTS SYSTEM CONFIGURATION......................................................7 2.1Test Configuration...............................................................................................................................7 3TEST EQUIPMENT LIST.......................................................................................................8 4MEASUREMENT UNCERTAINTY.......................................................................................9 5TEST RESULTS.....................................................................................................................10 6PATTERN PLOTS.................................................................................................................12 6.1Return Loss........................................................................................................................................12 6.2VSWR................................................................................................................................................13 6.3Stimulus............................................................................................................................................14 72-D ANTENNA PATTERN..................................................................................................15 83-D ANTENNA PATTERN..................................................................................................16 9THE EUT AND TEST CONFIGURATION.........................................................................17 ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 4 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 1General Information 1.1Testing Laboratory Test Lab SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Address No. 1 Workshop, M-10, Middle section, Science & Technology Park, Nanshan District, Shenzhen, Guangdong, China 518057 ContactErvin Li Tel.+86 18823369694 Fax+86-755-25328600 [email protected] 1.2Details of Applicant Applicant’s Name SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Applicant’s Address Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District, Shenzhen, Guangdong, P.R.China 518132 Contact Shang Xiaona Tel. 13691988632 Fax N/A E-mail [email protected] 1.3Details of Manufacturer Manufacturer’s Name SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Manufacturer’s Address Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District, Shenzhen, Guangdong, P.R.China 518132 Contact Shang Xiaona Tel. 13691988632 Fax N/A E-mail [email protected] ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 5 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 1.4General Description of EUT Device Description: On-board Antenna Device Manufacturer: SHENZHENHEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Device Model: AT02 Hardware Version: V1.0 Software Version: V1.0 Antenna Type: PCB Antenna Dimension: 9.35mm * 3.80mm * 0.5mm 1.5Test Procedure Testing is performed according to the ANSI/IEEE Std 149-2021. ` SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch Report No.: SZOA2603000072HS01 Rev.:01 Page: 6 of 18 Report Template No./Rev: SZWI-TRF-OA006/ v02 1.6Test Specification IdentityDocument Title ANSI/IEEE Std 149-2008IEEE Standard Test Procedures for Antennas 1.7Laboratory Environment Temperature Min. =19°C，Max. = 25°C Relative humidity Min. =40%，Max. =72% Shield effect0.7-6GHz> 100dB Ground resistance <0.5 ` SGS-CSTC Standards …

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121102 Page: 1 of 61 Keny Xu EMC Laboratory Manager TEST REPORT Application No.: SZCR2603001211AT Applicant: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Applicant: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Manufacturer: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Manufacturer: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Factory: SHENZHEN HEALTHCARE ELECTRONIC TECHNOLOGY CO., LTD. Address of Factory: Block 48, Changxing Industrial Zone, Changzhen Community, Yutang Street, Guangming District Shenzhen 518132 China Equipment Under Test (EUT): EUT Name: Weight Tracking Smart Scale Model No.: 5345339, BG8041BT   Please refer to section 2 of this report which indicates which model was actually tested and which were electrically identical. Trade Mark: FCC ID: 2AAJ7-5345339 Standard(s) : 47 CFR Part 15, Subpart C 15.247 Date of Receipt: 2026-03-25 Date of Test: 2026-03-30 to 2026-04-03 Date of Issue: 2026-04-09 Test Result: Pass* * In the configuration tested, the EUT complied with the standards specified above. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121102 Page: 2 of 61 Revision Record Version Chapter Date Modifier Remark 01 2026-04-09 Original Authorized for issue by: Gebin Sun/Project Engineer Eric Fu/Reviewer SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121102 Page: 3 of 61 2 Test Summary Radio Spectrum Technical Requirement Item Standard Method Requirement Result Antenna Requirement 47 CFR Part 15, Subpart C 15.247 N/A 47 CFR Part 15, Subpart C 15.203 & 15.247(b)(4) Pass Radio Spectrum Matter Part Item Standard Method Requirement Result Radiated Emissions which fall in the restricted bands 47 CFR Part 15, Subpart C 15.247 ANSI C63.10 (2020) Section 6.10.5 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Below 1GHz ANSI C63.10 (2020) Section 6.4,6.5 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Radiated Spurious Emissions Above 1GHz ANSI C63.10 (2020) Section 6.6 & 11.12 47 CFR Part 15, Subpart C 15.205 & 15.209 Pass Maximum Conducted Output Power ANSI C63.10 (2020) Section 11.9.1 47 CFR Part 15, Subpart C 15.247(b)(3) Pass Minimum 6dB Bandwidth ANSI C63.10 (2020) Section 11.8.1 47 CFR Part 15, Subpart C 15.247a(2) Pass Power Spectral Density ANSI C63.10 (2020) Section 11.10.3 47 CFR Part 15, Subpart C 15.247(e) Pass Conducted Band Edges Measurement ANSI C63.10 (2020) Section 6.10.4 47 CFR Part 15, Subpart C 15.247(d) Pass Conducted Spurious Emissions ANSI C63.10 (2020) Section 11.11 47 CFR Part 15, Subpart C 15.247(d) Pass Remark: Model No.: 5329325, FG7602BT Only the model 5329325 was tested, since according to the declaration from the applicant, the electrical circuit design, PCB layout, components used and internal wiring and functions were identical for the above models, with only difference being of appearance, software, color and client. SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01 Rev. A/2 Report No.: SZCR260300121102 Page: 4 of 61 3 Contents Page 1 Cover Page ................................................................................................................................................ 1 2 Test Summary ........................................................................................................................................... 3 3 Contents .................................................................................................................................................... 4 4 General Information .................................................................................................................................. 6 4.1 Details of E.U.T. ................................................................................................................................. 6 4.2 Description of Support Units .............................................................................................................. 6 4.3 Measurement Uncertainty .................................................................................................................. 6 4.4 Test Location ...................................................................................................................................... 7 4.5 Test Facility ........................................................................................................................................ 7 4.6 Deviation from Standards ................................................................................................................... 7 4.7 Abnormalities from Standard Conditions ........................................................................................... 7 5 Equipment List .......................................................................................................................................... 8 6 Radio Spectrum Technical Requirement ............................................................................................. 10 6.1 Antenna Requirement ...................................................................................................................... 10 6.1.1 Test Requirement: ....................................................................................................................... 10 6.1.2 Conclusion ................................................................................................................................... 10 7 Radio Spectrum Matter Test Results .................................................................................................... 11 7.1 Radiated Emissions which fall in the restricted b…

Text truncated - open the document above for the full version.

SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A04 Rev.A/1 Page: 1 of 3 Setup Photos for SZCR2603001211AT FCC ID: 2AAJ7-5345339 SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch SZEMC-TRF-01-A04 Rev.A/1 Page: 2 of 3 …

Text truncated - open the document above for the full version.